| 	
		 WHYNTER Eco Pure Air Purifier   
					MODEL# : AFR-300   
					SB/W   
					Instruction Manual   
					Thank you for your purchase of this WHYNTER product. Please read this Instruction Manual carefully before   
					using the product to ensure optimal performance. Keep this manual in a safe place for future reference.   
					1 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Important Safety Instructions   
					To reduce the risk of fire, electrical shock, or injury when using your appliance, follow   
					these basic precautions:   
					1. Place the appliance on hard and level surface where it can not be easily knocked   
					down.   
					2. Do not use if the power supply cord is damaged. If damaged, it must be replaced by a   
					qualified electrician.   
					3. This appliance is not intended for use by young children or physically-challenged   
					persons without supervision/assistance. Young children must be supervised to ensure   
					safety around this or any appliance.   
					4. Always switch off and unplug the appliance when replacing filters, cleaning,   
					moving, or when not in use.   
					5. Keep the appliance away from any heat source, direct sunlight or area with excessive   
					moisture such as bathrooms and kitchens.   
					6. This air purifier is an electrical appliance. To avoid injury from electrical shock do not   
					operate the appliance with wet hands, while standing on a wet surface or while   
					standing near in water. Do not use outdoors or in wet conditions.   
					7. Avoid placing any objects on top of the appliance.   
					8. Never pull the cord to disconnect it from the power outlet. Grasp the plug and pull it   
					from the outlet.   
					9. Never lift or carry the appliance by the power cord.   
					10. This appliance is designed for household, non-commercial use only. Any other use will   
					void the warranty.   
					11. Do not try to disassemble, modify or repair the appliance by yourself.   
					12. Do not place the appliance upside down or on its side.   
					13. Do not block the air intake and air outlet.   
					14. When positioning the appliance, ensure that there is at least a 6” clearance around the   
					appliance. This allows for adequate ventilation.   
					15. If used with a humidifier, please keep this appliance away from the humidifier.   
					16. Never use harsh detergents or solvents to clean the appliance.   
					17. Do not operate the appliance without installing the filters.   
					18. Do not wash and reuse the Whynter HEPA filter. HEPA filters should only be   
					replaced, not cleaned.   
					. 
					3 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				This AFR-300 air purifier utilizes a complete 5-layer purification system which includes   
					a Pre-filter, HEPA filter, Activated carbon filter, Photo-catalyst filter and UV light. The   
					AFR-300 air purifier not only traps dust and dirt, it also destroys allergens such as   
					dust mites, pollen and pet epithelia. It kills over 99% of viruses, over 98% of bacteria   
					and over 94% of mold and fungus.   
					The conveniently compact size allows the Whynter Eco Pure air purifier to be moved   
					from room to room or from a home to the office as needed. With an effective range of   
					600 square feet, it is powerful enough to clean the air in any room.   
					Purification Technology   
					Pre-filter: The washable pre-filter filtrates large size allergens, dust and pet hair.   
					HEPA filter: HEPA stands for High Efficiency Particulates Air. The Whynter HEPA filer   
					is designed to remove 99.97% of all allergens such as bacteria, pollen, pet dander,   
					dust mite that we 0.3 microns or larger. (For reference, 1 microns is 1/100th of the   
					width of human hair.) Once the allergens are “trapped” by the HEPA filter, they are not   
					released back into the air.   
					Activated carbon filter: The washable activated carbon filter absorbs and removes   
					common household odors VOCs (volatile organic compound), chemical smells and   
					cigarette odor.   
					Ultraviolet (UV) light: Sterilizes airborne pathogens like germs, viruses and bacteria   
					that are too small to be captured by the HEPA filter.   
					Photo-catalyst filter: Photo-catalyst (TiO2) filter uses ultra violet light to breakdown   
					harmful gases in removing both particulate and gas contaminants from air. It purifies,   
					sterilizes and deodorizes air. It kills harmful bacteria thoroughly, decomposes organic   
					compounds (methanal, benzene, etc.) and inorganic compounds (nitrogen oxide,   
					sulphide, etc.), and inhibit mildew. It also has self-cleaning ability.   
					4 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Technical Data   
					Model no.   
					AFR-300   
					Coverage Area   
					Voltage   
					600 Sq. Ft.   
					120v / 60Hz   
					>99.97%   
					76 Watts   
					<35dB   
					Purification efficiency   
					Input power   
					Noise level (at lowest setting)   
					Fan Speed   
					Air flow   
					4 adjustable speed   
					250 Square Meter per Hour Max. /   
					147 Cubic feet per minute Max.   
					16.5 lbs   
					Net weight   
					Product size(W×H×D)   
					16”” × 8.3” × 29.7”   
					5 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				PARTS OVERVIEW   
					1. Control Panel   
					6. Filter Frame   
					2. Front Cover   
					3. Front Cover Clip 4. Air Intake Vents 5. Pre-filter   
					7. HEPA Filter & 8. Photo-catalyst   
					Activated Carbon Filter   
					Filter   
					9. UV Lamp   
					10. Remote   
					Control holder   
					11. Handle   
					12. Air Outlet Vent 13. Fragrance   
					Diffuser   
					14. Power Cord   
					6 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				CONTROL PANEL & REMOTE CONTROL   
					1. ON/OFF: Turns on / off the air purifier.   
					2. FAN: Sets fan speed setting in the cycle of High –> Medium –> Low –> Silent.   
					3. SILENT: Sets the air purifier to run at a noise level below 35 dB to ensure sound   
					sleep. By pressing this button, this machine will be switched into the “SILENT” fan   
					mode.   
					4. SLEEP: Sets running time of the air purifier at SLIENT mode for 8 hours. In the   
					SLEEP mode, the TIMER function cannot be used.   
					5. UV Lamp: Turns on / off the photo-catalyst POC function.   
					6. UV Lamp indicator on LCD display: When the UV lamp is on, the screen displays   
					, the sun icon. When the screen displays   
					, it indicates that the UV lamp   
					needs to be replaced. The working life of a UV lamp is about 15,000 hours.   
					7. HEPA filter replacement indicator: When the HEPA filter replacement indicator   
					blinks on the LCD display, you need to change a new HEPA filter.   
					8. LED: The background of the LED light can be turned on and off.   
					9. Intentionally removed.   
					10. TIMER: By pressing “TIME” button once, “88:88” will be displayed, press the “+” &   
					“-” buttons to set the current time. When the air purifier is turned on, press the   
					“TIME” button twice quickly, “88:88 time off” will be displayed, then press the “+” & “-”   
					buttons to adjust the time off. When the machine is on Standby mode, press the   
					“TIME” button twice quickly, “88:88 time on” will be displayed, then press the “+” & “-”   
					buttons to adjust the activation time.   
					11. ANTI-POLLEN: Turns on the pollen-removing function. This mode of operation is   
					recommended for pollen season. The fan speed will run in a cycle of medium   
					speed for 5 minutes and low speed for 5 minutes.   
					7 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				REMOTE CONTROL OPERATION   
					1. ON/OFF: Turns on / off the air purifier.   
					2. LOCK: Press the “LOCK” (No. 2) button on remote control to lock the air   
					purifier. All the buttons on the air purifier and the remote control are disabled   
					except the “LOCK” button on the remote control. To unlock the air purifier,   
					press this button again. You can also unplug and restart the air purifier.   
					2. FAN: Sets fan speed setting in the cycle of High –> Medium –> Low –> Silent.   
					3. SILENT: Sets the air purifier to run at a noise level below 35 dB to ensure   
					sound sleep. By pressing this button, this machine will be switched into the   
					“SILENT” fan mode.   
					4. SLEEP: Sets running time of the air purifier at SLIENT mode for 8 hours. In the   
					SLEEP mode, the TIMER function cannot be used.   
					5. UV Lamp: Turns on / off the photo-catalyst POC function.   
					6. UV Lamp timer reset: If the UV Lamp is replaced, press the RESET button to   
					set the timer to zero.   
					7. HEPA filter timer reset: After the HEPA filter is replaced, press the RESET   
					button to set the timer to zero.   
					8. LED: Turns on / off the background LED light.   
					9. Intentionally removed.   
					10. TIMER: By pressing “TIME” button once, “88:88” will be displayed, press the   
					“+” & “-” buttons to set the current time. When the air purifier is turned on,   
					press the “TIME” button twice quickly, “88:88 time off” will be displayed, then   
					press the “+” & “-” buttons to adjust the time off. When the machine is on   
					Standby mode, press the “TIME” button twice quickly, “88:88 time on” will be   
					displayed, then press the “+” & “-” buttons to adjust the activation time   
					11. ANTI-POLLEN: Turns on the pollen-removing function. This mode of operation   
					is recommended for pollen season. The fan speed will run in a cycle of   
					medium speed for 5 minutes and low speed for 5 minutes.   
					8 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				• 
					The remote control is loaded with a CR2025 battery in advance. Before use,   
					please pull off the battery insulating plastic.   
					Aim the emitter of the remote control to receiver in the front of the air purifier.   
					The maximum signal transmission distance is approximately 15 feet.   
					Please change the battery if the signal is weak or if the remote control is   
					non-responsive.   
					• 
					• 
					9 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				INSTALLATION   
					1. The best location to install the air purifier is opposite a window or a door, this   
					creates optimal air circulation within the room.   
					2. If it is used in an air-conditioned room, place the air purifier opposite   
					the air conditioner, this creates optimal air circulation within the room.   
					3. Keep a distance of at least 3 feet of space between the air purifier and any equipment   
					which emits electric waves such as televisions, radios or wave clocks.   
					4. Ensure that there is at least a 6” clearance around the appliance. This allows for   
					adequate ventilation.   
					CLEANING & MAINTENANCE   
					To maintain the performance of the air purifier, regular cleaning of the unit and filters is   
					recommended.   
					► Cleaning the pre-filter   
					The pre-filter should be cleaned at least once a month.   
					• 
					• 
					• 
					Turn off and unplug the air purifier.   
					Remove the front cover and take out the pre-filter as shown in above pictures.   
					Rinse the pre-filter in warm water. Do not wash it in a washing machine or dish   
					washer. Do not use water hotter than 100F degree.   
					• 
					When the pre-filter is completely dry, place it back to the air purifier.   
					10   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				► Replacing HEPA filter   
					• 
					The HEPA filter needs to be replaced every 2,000 working hours or when the   
					HEPA icon flashes on the LCD display. The higher level of pollutants, the   
					shorter the lifespan of the filter.   
					• 
					• 
					• 
					Remove the front cover, the pre-filter and the old HEPA filter.   
					Install the new HEPA filter with the arrow in the front to the air purifier.   
					Press the HEPA “RESET” button on the remote control to reset the HEPA filter   
					timer.   
					• 
					Dispose of the old HEPA filter and do not reuse.   
					► Cleaning the photo-catalyst filter   
					The photo-catalyst filter should be cleaned every 6 months depending on the air   
					quality.   
					• 
					Remove the front cover, pre-filter and HEPA filter as shown in the above   
					picture.   
					11   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				• 
					Remove the photo-catalyst filter and use a vacuum cleaner with a nozzle or   
					brush attachment on lower power setting to clean the dirt and dust from the   
					filter.   
					► Replacing the UV Lamp   
					The UV lamp should be replaced every 15,000 working hours. This is indicated by the   
					blinking of the UV icon on the LCD display. Please contact Whynter’s service   
					department for purchase information of a new UV lamp.   
					► Cleaning the front cover   
					The surface of the air purifier should be cleaned at least once a month or more often   
					depending on the air quality.   
					• 
					• 
					• 
					• 
					• 
					Remove the front color from the air purifier.   
					Use a clean, dry cloth to wipe the external surfaces.   
					Use a damp cloth to remove stubborn stains and dirt build up.   
					Clean the air inlets and outlet with a dry cloth or a vacuum cleaner.   
					When dismounting or mounting the front cover, please be careful not to break   
					the hinge at the bottom of the front cover, otherwise this unit can not be turned   
					on. The block is a safety device which automatically cuts power off when the   
					front cover is opened.   
					12   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				TROUBLESHOOTING   
					Trouble   
					Check list   
					Solution   
					Unit does not start   
					There is a power supply failure   
					Ensure that the air purifier is plugged   
					in and the power outlet has power   
					The front cover is installed   
					properly   
					Install the front cover properly   
					Turn off the Child lock   
					Remote control does not   
					work   
					The Child lock may be on   
					The remote control has no   
					power   
					Replace battery in the remote   
					control   
					The remote control signal is   
					obstructed   
					Point the remote control directly   
					towards the front of the air purifier   
					Ensure the unit sits on a hard and   
					level surface. Do not place the unit   
					on carpet.   
					The air purifier is noisy and   
					vibrates   
					The unit is not level   
					Odor and smoke are not   
					removed   
					Filters are dirty   
					Clean or replace filters   
					The unit is unable to circulate air Install unit in a place where air is   
					able to circulate   
					Air does not flow from the   
					unit   
					Air inlets maybe obstructed   
					Unit is not reset   
					Ensure the air inlets are not   
					obstructed   
					The filter replacement   
					indicator remains on after the   
					filter is replaced   
					Press the reset button on the remote   
					control   
					Unit needs to be restarted   
					Restart the unit by unplugging it   
					13   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				ONE YEAR LIMITED WARRANTY   
					This WHYNTER air purifier is warranted, to the original owner within the 48   
					continental states, for one year from the date of purchase against defects in material   
					and workmanship under normal use and service. Should your WHYNTER air purifier   
					prove defective within one year from the date of purchase, return the defective part or   
					unit, freight prepaid (within two months of purchase; after two months to one year,   
					customer will be responsible for freight cost to Whynter’s service department), along   
					with an explanation of the claim to Whynter LLC. Please package the air purifier   
					carefully in its original packaging material to avoid damage in transit. Please retain the   
					original box and packaging material. Under this warranty, Whynter will repair or   
					replace any parts found defective. This warranty is not transferable. After the   
					expiration of the warranty, the cost of labor and parts will be the responsibility of the   
					original owner of the unit.   
					THIS WARRANTY DOES NOT COVER:   
					• 
					• 
					• 
					Filters   
					Acts of God, such as fire, flood, hurricanes, earthquakes and tornadoes.   
					Damage, accidental or other wise, to the air purifier while in the possession of   
					a consumer not caused by a defect in material or workmanship;   
					Damage caused by consumer misuse, tampering, or failure to follow the care   
					and special handling provisions in the instructions.   
					• 
					• 
					• 
					Damage to the finish of the case, or other appearance parts caused by wear.   
					Damage caused by repairs or alterations to the air purifier by anyone other   
					than authorized by the manufacturer.   
					• 
					Freight and Insurance cost for the warranty service.   
					To obtain service or information, contact   
					
					call 866-WHYNTER.   
					14   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |