VA720 LCD Display
Ɋɭɤɨɜɨɞɫɬɜɨ ɩɨɥɶɡɨɜɚɬɟɥɹ
Instrukcja obsáugi
Full 17" Diagonal Viewable Screen
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © ViewSonic Corporation, 2002. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC
are trademarks of VESA.
®
ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency (EPA).
®
As an ENERGY STAR partner, ViewSonic Corporation has determined that this product meets the
®
ENERGY STAR guidelines for energy efficiency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this mate-
rial, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
To meet your future needs, and to receive any additional product information as it becomes
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you
may mail or fax to ViewSonic.
A720
3
A720
ViewSonic is concerned about the preservation of our environment. Please dispose of this product
properly at the end of its useful life. Your local waste disposal company may provide information
about proper disposal.
ViewSonic
VA720
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase of a ViewSonic® LCD display. Important!
Save the original box and all packing material for future shipping needs.
NOTE: The word “Windows” in this user guide refers to the following
Microsoft operating systems: Windows 95, Windows NT, Windows 98,
Windows 2000, Windows Me (Millennium), and Windows XP.
Your LCD display package includes:
• LCD display
• Power cords
• ViewSonic Wizard CD-ROM
NOTE: The CD jacket contains the Quick Start Guide, and the CD includes the
User Guide PDF files and INF/ICM display optimization files. The INF file
ensures compatibility with Windows operating systems, and the ICM file (Image
Color Matching) ensures accurate on-screen colors. ViewSonic recommends
that you install both files.
• Sit at least 18" from your LCD display.
• Place your LCD display in a well-ventilated
area. Do not place anything on your LCD
display that prevents heat dissipation.
• Avoid touching the screen. Skin oils are
difficult to remove.
• Ensure the area around the LCD display is
clean and free of moisture.
• Never remove the rear cover. Your LCD
display contains high-voltage parts. You may
be seriously injured if you touch them.
• Do not place heavy objects on the LCD
display, video cable, or power cord.
• Avoid exposing your LCD display to direct
sunlight or another heat source. Orient your
LCD display away from direct sunlight to
reduce glare.
• If smoke, abnormal noise, or strange odor is
present, immediately switch the LCD display
off and call your dealer or ViewSonic. It is
dangerous to continue using the LCD display.
• Always handle your LCD display with care
when moving it.
ViewSonic
VA720
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional: For instructions on wall mounting,
see page 5 of this user guide.
If your computer does not have a CD-ROM
drive, see “Customer Support.”
(1) Wait for the CD-ROM to auto-start.
NOTE: If the CD-ROM does not auto-start:
double-click on the CD-ROM icon in the
Windows Explorer, then double-click on
viewsonic.exe.
• Make sure both the LCD display and
computer are turned OFF
• Remove rear panel covers if necessary
• Connect the video cable from the LCD
display to the computer
(2) Follow the on-screen instructions.
Macintosh users: Models older than G3
require a Macintosh adapter. Attach the
adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic® Macintosh adapter,
contact ViewSonic Customer Support.
Example: 1280 x 1024 @ 60 Hz.
For instructions on changing the resolution
and refresh rate, see the graphic card’s user
guide.
Installation is complete. Enjoy your new
ViewSonic, LCD display.
To be best prepared for any future customer
service needs: print this user guide and write
the serial number in “For Your Records” on
page 2. (See back of LCD display.)
• Turn ON the LCD display, then turn ON
the computer. This sequence (LCD
display before computer) is important
NOTE: Windows users may receive a
message asking them to install the INF file.
This is on the CD.
You can register your product online at the
website for your region. See the Customer
Support table in this guide.
The ViewSonic Wizard CD-ROM also
provides an opportunity for you to print the
registration form which you may mail or fax
to ViewSonic.
• Follow the on-screen instructions
Power cord to LCD
display
AC outlet (wall socket)
Power cord to computer
Video cable to computer
Kensington
Lock
ViewSonic
VA720
4
Download from Www.Somanuals.com. All Manuals Search And Download.
To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to
the instructions that come with the base mounting kit. To convert your LCD
displayfrom a desk-mounted to a wall-mounted display, do the following:
Disconnect Power.
Push the LCD display back and
down flat against the base as
shown.
Lay the LCD displayface down
on a towel or blanket. Notice the
four screw holes on the bottom of
the base.
Attach the mounting bracket
from the VESA compatible wall-
mounting kit (100 mm x 100 mm
distance).
Four
screw
holes
Attach the LCD displayto the
wall, following the instructions in
the wall-mounting kit.
Mounted
on the wall
ViewSonic
VA720
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the timing mode is important for maximizing the quality of the
screen image and minimizing eye strain. The timing mode consists of the
resolution (example 1280 x 1024) and refresh rate (or vertical frequency;
example 60 Hz). After setting the timing mode, use the OnView® controls
to adjust the screen image.
For the best picture quality set your LCD display timing mode to:
VESA 1280 x 1024 @ 60 Hz.
To set the Timing Mode:
Set the resolution: Right-click on the Windows desktop > Properties >
Settings > set the resolution.
Set the refresh rate: See your graphic card's user guide for instructions.
WARNING: Do not set the graphics card in your computer to exceed the
maximum refresh rate of 75Hz; doing so may result in permanent damage to
your LCD display.
• OSD Lock: Press and hold [1] and the up arrow ▲ for 10 seconds. If any
buttons are pressed the message OSD Locked will display for a few seconds.
• OSD Unlock: Press and hold [1] and the up arrow ▲ again for 10 seconds.
• Power Button Lock: Press and hold [1] and the down arrow ▼ for 10
seconds. If the power button is pressed the message Power Button Locked
will display for a few seconds. With or without this setting, after a power
failure, your LCD display’s power will automatically turn ON when power is
restored.
• Power Button Unlock: Press and hold [1] and the down arrow ▼ again for
10 seconds.
ViewSonic
VA720
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the buttons on the front control panel to display and adjust the OnView®
controls. The OnView controls are explained at the top of the next page and are
defined in “Main Menu Controls” on page 9.
Main Menu
with OnView controls
Power light
Displays, saves
changes to, and exits
the Main Menu.
Power On/Off
Selects a highlighted control.
Also, displays the control screen
for the selected control and
toggles between control pairs.
Scrolls through menu
options and adjusts the
displayed control.
ViewSonic
VA720
7
Download from Www.Somanuals.com. All Manuals Search And Download.
To display the Main Menu, press button [1].
NOTE: All OnView menus and adjustment screens disappear automatically
after about 30 seconds. This time period is adjustable through the Setup menu
and the OSD timeout control described on page 11.
To highlight a control you want to adjust, press ▲ or ▼ to scroll up or down
the Main Menu.
To select the highlighted control, press button [2]. A control screen appears
like the example shown below.
The ▼ down
arrow decreases
Contrast, ▲ up
arrow increases
Contrast.
The line at the
bottom of the screen
tells you what you
can do next: select
the Brightness
control or Exit.
To adjust the control, press the up ▲ or down ▼ buttons.
To save the adjustments and exit the menu, press button [1] twice.
• Adjust your computer's graphic card so that it outputs a video signal 1280 x
1024 @ 60 Hz to the LCD display. (Look for instructions on “changing the
refresh rate” in your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated “active area” of the
LCD display.)
ViewSonic
VA720
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the menu items shown below by using the up ▲ and down ▼ buttons.
automatically sizes, centers, and fine tunes
the video signal to eliminate waviness and distortion.
Press the [2] button to obtain a sharper image.
NOTE: Auto Adjust works with most common video
cards. If this function does not work on your LCD display, then
lower the video refresh rate to 60 Hz and set the resolution to its
pre-set value.
adjusts the difference between the image background
(black level) and the foreground (white level).
adjusts background black level of the screen image.
provides several color options: preset color
temperatures and User which allows you to adjust red (R), green
(G), and blue (B). The factory setting for this product is 6500K
(6500 Kelvin).
— Individual adjustments for red, green, and blue.
— Adds blue and green to the screen image for a darker
color.
— Adds red to the screen image for warmer white and
richer red. Default setting.
— Adds blue to the screen image for cooler white (used
in most office settings with fluorescent lighting).
To select color (R, G or B) press button [2].
To adjust selected color, press ▲ or ▼.
When you are finished making all color adjustments, press
button [1] twice.
The Image Adjust controls are explained below:
adjusts horizontal and vertical position of the
screen image. You can toggle between Horizontal and Vertical
by pressing button [2]. Horizontal moves the screen image to
the left or to the right. Vertical moves the screen image up and
down.
(Horizontal Size) adjusts the width of the screen image.
Vertical size is automatic with your LCD display.
sharpens focus by aligning the illuminated text and/
or graphic characters.
Try the Auto Adjust (see page 9) before using the Fine
Tune control.
adjusts the clarity and focus of the screen image.
displays the menu shown below:
The Setup Menu controls are explained below:
allows you to choose the language used in the
menus and control screens.
ViewSonic
VA720
10
Download from Www.Somanuals.com. All Manuals Search And Download.
advises the optimal resolution to use.
allows you to move the on-screen display menus
and control screens.
sets the length of time an on-screen display
screen is displayed. For example, with a “15 second” setting, if
a control is not pushed within 15 seconds, the display screen
disappears.
returns adjustments to the original factory
settings if the display is operating in a factory Preset Timing
Mode listed in this user guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
ViewSonic
VA720
11
Type
17" (full 17" viewable diagonal area),
TFT (Thin Film Transistor), Active Matrix SXGA LCD,
0.264 mm pixel pitch
Color Filter
Glass surface
RGB vertical stripe
Anti-Glare
-3 ~ 20°
Video Sync
RGB analog (0.7/1.0 Vp-p, 75 ohms)
Separate Sync
fh:30-82 kHz, fv:50-75 Hz
PC
Macintosh1
Up to 1280 x 1024 Non-interlaced
Power Macintosh up to 1280 x 1024
Recommended
and supported
1280 x 1024 @ 60
Hz
1024 x 768 @ 60, 70, 72, 75 Hz
800 x 600 @ 56, 60, 72, 75 Hz
640 x 480 @ 60, 75 Hz
640 x 350 @ 70 Hz
720 x 400 @ 70 Hz
Voltage
100-240 VAC, 50/60 Hz (auto switch)
Full Scan
337.92 mm (H) x 270.34 mm (V)
13.30" (H) x 10.64" (V)
Temperature
Humidity
Altitude
+32° F to +104° F (0° C to +40° C)
10% to 90% (no condensation)
To 10,000 feet
Temperature
Humidity
Altitude
-4° F to +140° F (-20° C to +60° C)
10% to 90% (no condensation)
To 40,000 feet
Physical
(LCD display only)
415 mm (W) x 419 mm (H) x 230 mm (D)
16.34" (W) x 16.5" (H) x 9.1" (D)
Net
6.2 kg (13.61 lbs) LCD display only
UL, FCC-B, ENERGY STAR®, FCC-B (Doc-B), CE, MPRII,
NEMKO, SEMKO, DEMKO, FIMKO, C-UL, TCO99, TUV/ GS,
E2002, EPA, VCCI, BSMI, CB, ISO13406-2, PCT
(BZ02), PSB, PCBC
On
Active Off
Normal
< 2W
(green LED)
(orange LED)
(pre-adjusted to VESA® 1280 x 1024@ 60 Hz)
Do not set the graphics card in your computer to exceed these refresh rates; doing so may
result in permanent damage to the LCD display.
1 Macintosh computers older than G3 require a ViewSonic®, Macintosh adapter. To order an adapter,
contact ViewSonic.
ViewSonic
VA720
12
Download from Www.Somanuals.com. All Manuals Search And Download.
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is securely connected to the DC power supply
and the power supply is firmly connected to the LCD display.
• Plug another electrical device (like a radio) into the power outlet to verify that
the outlet is supplying proper voltage.
• Make sure the video cable supplied with the LCD display is tightly secured to
the video output port on the back of the computer. If the other end of the
video cable is not attached permanently to the LCD display, tightly secure it
to the LCD display.
• Adjust brightness and contrast.
• If you are using an Macintosh older than G3, you need a Macintosh adapter.
• If any colors (red, green, or blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector
could cause an improper connection.
• Connect the LCD display to another computer.
• If you have an older graphics card, contact ViewSonic for a non-DDC
adapter.
• Press only one button at a time.
ViewSonic
VA720
13
Download from Www.Somanuals.com. All Manuals Search And Download.
For technical support or product service, see the table below or contact your
reseller.
NOTE: You will need the product serial number.
United States
Canada
viewsonic.com/
support
(800) 688-6688
(909) 468-1202 viewsonic.com
service.us@
viewsonic.com/
support
(800) 688-6688
(909) 468-1202 viewsonic.com
service.ca@
United Kingdom
viewsoniceurope.com
0800 833 648
(01293) 643910 viewsoniceurope.com
service.eu@
Europe, Middle
East, Baltic
countries, and
North Africa
viewsoniceurope.com Contact your
reseller
service.eu@
viewsoniceurope.com
Australia and New viewsonic.com.au
Zealand
+61 2 9929 3955 service.au@
+61 2 9929 8393 viewsonic.com
Singapore/India
and Southeast
Asia
viewsonic.com.sg
65 273 4018
65 273 1566
service.sg@
viewsonic.com
Other Asia/Pacific viewsonic.com.tw
countries
886 2 2246 3456 service.ap@
886 2 8242 3668 viewsonic.com
South Africa
viewsonic.com/asia
886 2 2246 3456 service.ap@
886 2 8242 3668 viewsonic.com
ViewSonic
VA720
14
Download from Www.Somanuals.com. All Manuals Search And Download.
• MAKE SURE THE LCD DISPLAY IS TURNED OFF.
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE
SCREEN OR CASE.
Wipe the screen with a clean, soft, lint-free cloth. This removes dust and
other particles.
If still not clean, apply a small amount of non-ammonia, non-alcohol based
glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
Use a soft, dry cloth.
If still not clean, apply a small amount of a non-ammonia, non-alcohol
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then
wipe the surface.
ViewSonic does not recommend the use of any ammonia or alcohol-based
cleaners on the LCD display screen or case. Some chemical cleaners have been
reported to damage the screen and/or case of the LCD display. ViewSonic will not
be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
ViewSonic
VA720
15
Download from Www.Somanuals.com. All Manuals Search And Download.
warrants its products to be free from defects in material and workmanship during the
warranty period. If a product proves to be defective in material or workmanship during the warranty
period,
will, at its sole option, repair or replace the product with a like product. Replacement
product or parts may include remanufactured or refurbished parts or components.
® LCD displays are warranted for 1 years for all parts including the light source and
1 years for all labor from the date of the first consumer purchase.
This warranty is valid only for the first consumer purchaser.
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
.
e. Causes external to the product, such as electrical power fluctuations or failure.
f. Use of supplies or parts not meeting
g. Normal wear and tear.
’s specifications.
h. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
1. For information about receiving service under warranty, contact
You will need to provide your product's serial number.
.
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized
vice center or
ser-
.
4. For additional information or the name of the nearest
.
service center, contact
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE
DESCRIPTION CONTAINED HEREIN INCLUDING THE AOND TH931 -1.5707 TTc 0MERCHACRIPTIONBILIE' AN
The socket-outlet should be installed near the equipment and should be easily accessible.
Use a power cable that is properly grounded. Always use the appropriate AC cord that is
certified for the individual country. Some examples are listed below:
USA.................UL
Canada.............CSA
Germany..........VDE
Switzerland ..... SEV
Britain ............. BASE/BS
Japan ............... Electric Appliance Control Act
The power cord set for this unit has been enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1
below):
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA
Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For
units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected according
to the current rating for your unit. Please consult the table below for the selection criteria for power cords
used in the United States and Canada.
Cord Type
Size of Conductors in Cord
Maximum Current Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
10 Amps
12 Amps
12 Amps
SVT
18 AWG
17 AWG
10 Amps
12 Amps
In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is HAR-
Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN
APPROPRIATE SOCKET.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
THIS APPLIANCE MUST BE EARTHED.
The wires in this mains lead are coloured in accordance with the following code:
Green-and-Yellow: Earth
Blue: Neutral
Brown: Live
If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by
the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or
coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked
with the letter L or coloured RED.
If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you
have purchased the product.
ViewSonic
VA720
17
Download from Www.Somanuals.com. All Manuals Search And Download.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
To assure continued FCC compliance, the user must use grounded power supply cord and the provided
shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a
shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this device.
The device complies with the requirements of the EEC directive 89/336/EEC as
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety”.
ViewSonic
VA720
18
Download from Www.Somanuals.com. All Manuals Search And Download.
®
ViewSonic Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|