O W N E R ’ S
O P E R A T I N G
M A N U A L
10/12
DLP™ PROJECTORS
VERSION 2.0
Download from Www.Somanuals.com. All Manuals Search And Download.
TWO YEAR LIMITED WARRANTY
For Projectors, Video Processors and Controllers
Congratulations on your purchase of a Vidikron video product and welcome to the Vidikron family! With proper installation, setup
and care, you should enjoy many years of unparalleled video performance.
This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other
important documents.
WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
SERVICE LABOR: Vidikron will pay for service labor by Vidikron Authorized Service Center when needed as a result of manufacturing
defect for a period of two (2) years from the effective date of delivery to the end user (excluding the lamp).
PARTS (not including the lamp): Vidikron will provide new or rebuilt replacement parts for the parts that fail due to defects in
materials or workmanship for a period of two (2) years from the effective date of delivery to the end user. Such replacement parts
are then subsequently warranted for the remaining portion (if any) of the original warranty period.
PROJECTOR LAMP: Vidikron will pay for service labor by a Vidikron Authorized Service Center when needed as a result of a
manufacturing defect for a period of six (6) months or 1000 hours, whichever comes first, from the effective date of delivery to the
end user. In addition, Vidikron will provide a new or rebuilt replacement lamp for the lamp that fails due to defects in materials or
workmanship for a period of six (6) months or 1000 hours, whichever comes first, from the effective date of delivery to the end user.
Such replacement lamps are then subsequently warranted for the remaining portion (if any) of the original warranty period.
WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:
This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does not
cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from
accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper
maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and brownouts;
damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote control units,
damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this Limited Warranty.
CAUTION: THIS LIMITED WARRANTY ONLY COVERS VIDIKRON PRODUCTS PURCHASED FROM VIDIKRON AUTHORIZED DEALERS.
ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. MOREOVER, DAMAGE
RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE
UNDER THIS LIMITED WARRANTY. IT IS IMPERATIVE THAT INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN
AUTHORIZED VIDIKRON DEALER TO PROTECT YOUR RIGHTS UNDER THIS WARRANTY. THIS WILL ALSO ENSURE THAT YOU ENJOY
THE FINE PERFORMANCE OF WHICH YOUR VIDIKRON PRODUCT IS CAPABLE WHEN INSTALLED AND CALIBRATED BY VIDIKRON
AUTHORIZED PERSONNEL.
RIGHTS, LIMITS AND EXCLUSIONS:
Vidikron limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There
are no express warranties. Vidikron also excludes any obligation on its part for incidental or consequential damages related to the
failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and some
states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or exclusions may
not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
EFFECTIVE WARRANTY DATE:
This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as
evidence of the purchase date.
IMPORTANT -- WARRANTY REGISTRATION:
Please fill out and mail your warranty registration card. It is imperative that Vidikron knows how to reach you promptly if we should
discover a safety problem or product update for which you must be notified.
CONTACT A VIDIKRON AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:
Repairs made under the terms of this Limited Warranty covering your Vidikron video product will be performed at the location of
the product, during usual working hours, providing location of product is within normal operating distance from a Vidikron
Authorized Service Center. In some instances it may be necessary for the product to be returned to the Vidikron factory for repairs.
If, solely in Vidikron’s judgment, location of product to be repaired is beyond normal operating distance of the closest Vidikron
Authorized Service Center, or the repair requires the unit be returned to the Vidikron factory, it is the owner’s responsibility to
arrange for shipment of the product for repair. These arrangements must be made through the selling Vidikron Dealer. If this is not
possible, contact Vidikron directly for a Return Authorization number and shipping instructions. Vidikron will return product
transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping costs will be the
responsibility of the owner.
COPYRIGHT AND TRADEMARKS:
© Copyright 2006 Vidikron, a Runco International Company. This document contains proprietary information protected by
copyright, trademark and other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.
Vidikron, Vision, IntelliWide, Imagix, DView and CSMS are trademarks of Vidikron. All other trademarks and registered trademarks
used in this document are the property of their respective owners.
Vidikron products are manufactured under one or more of the following patents: US. Patent 6755540 and Other Patents Pending.
iv
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION:
To locate the name and address of the nearest Vidikron Authorized Service Center, or for additional information about this Limited
Warranty, please call or write:
VIDIKRON
Attn: Customer Service Department
2900 Faber Street
Union City, CA 94587
Ph: (510) 324-5900
Fax: (510) 324-5905
Toll Free: (888) 4VIDIKRON
VIDIKRON PRODUCT INFORMATION
RETAIN THIS INFORMATION FOR YOUR RECORDS
_________________________________________________________
Model Purchased
________________________________________
Date
____________________________________________________________________________________________________________
Serial Number
____________________________________________________________________________________________________________
Vidikron Authorized Dealer Name
____________________________________________________________________________________________________________
Address
____________________________________________
__________________
State/Province
________________________
Postal Code
City
____________________________________________
Phone
_______________________________________________________
Fax
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Thank you for your purchase of this quality Vidikron video projector! It has been designed to provide you with the quality of video
that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the
menus and operation.
WARNING
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
may be of sufficient magnitude to constitute a risk of electric shock.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Do not use this equipment near water, outdoors or otherwise exposed to the elements.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
8. Do not defeat the safety feature of the polarized or grounding type plug. A polarized type plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
9. The 12V trigger only outputs DC 12V signal for triggering. Do not connect to any other power input or output. This could cause
damage to this unit.
10. Only use accessories specified by Vidikron.
11. Keep the packing material in case the equipment should ever need to be shipped.
12. Unplug this projector during lightning storms or when it will not be used for an extended period of time.
13. The lamp becomes extremely hot during operation. Allow the projector to cool down for approximately 45 minutes prior to
removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps
beyond rated life could cause them to explode in rare occasions.
14. Refer all servicing to qualified service personnel. Servicing is required when the projector has been damaged in any way,
objects have fallen or spilled into the projector, the projector has been exposed to rain or moisture, does not operate normally,
or has been dropped.
vi
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1Table of Contents
TWO YEAR LIMITED WARRANTY ............................................................................................. iii
Safety Precautions ................................................................................................................... vi
1. Introduction ........................................................................................................................ 1
Description, Features and Benefits ............................................................................................................. 3
Parts List ....................................................................................................................................................... 4
2. Controls and Functions ...................................................................................................... 5
3. Installation ........................................................................................................................13
Remote Control ................................................................................................................................................13
Notes on Batteries ...................................................................................................................................13
Notes on Remote Control Operation................................................................................................14
Quick Setup .......................................................................................................................................................15
Installation Considerations ..........................................................................................................................16
Installation Type ......................................................................................................................................16
Ambient Light ..........................................................................................................................................16
Other Considerations ............................................................................................................................16
Throw Distance.........................................................................................................................................17
Vertical and Horizontal Position.........................................................................................................18
Vertical and Horizontal Lens Shift......................................................................................................18
Adjusting the Projection Angle ..........................................................................................................20
Mounting ....................................................................................................................................................21
Folded Optics ............................................................................................................................................21
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to the Vision 10/12 ................................................................................................................22
Connector Panel Access ........................................................................................................................22
Connecting the Vision 10/12 to Source Components................................................................22
RS-232 Controller Connection ............................................................................................................27
Connecting to the 12-Volt Trigger Output.....................................................................................28
4. Operation ..........................................................................................................................29
Turning on the Power ....................................................................................................................................29
Adjusting the Projector Height or Projection Angle ...........................................................................29
Changing the OSD Language .....................................................................................................................30
Adjusting the Picture Orientation .............................................................................................................30
Lens Adjustments ............................................................................................................................................31
Focus/Zoom...............................................................................................................................................31
Shift ..............................................................................................................................................................32
Using the On-Screen Menus ........................................................................................................................32
Main Menu ................................................................................................................................................34
Source Select ............................................................................................................................................34
Aspect Ratio ..............................................................................................................................................34
Picture Adjust............................................................................................................................................36
Image Option ...........................................................................................................................................42
Installation .................................................................................................................................................44
ISF Settings ................................................................................................................................................46
5. Maintenance and Troubleshooting ................................................................................49
Cleaning the Projector ...................................................................................................................................49
Cleaning the Lens ............................................................................................................................................49
Cleaning the Intake and Exhaust Vents ...................................................................................................50
Lamp Maintenance .........................................................................................................................................51
Lamp Cautions ..................................................................................................................................................51
Lamp Replacement .........................................................................................................................................52
Troubleshooting Tips .....................................................................................................................................53
6. Serial Communications ....................................................................................................55
RS-232 Connection and Port Configuration ..........................................................................................55
Serial Command Syntax ................................................................................................................................55
7. Specifications ....................................................................................................................57
Vision 10/12 Specifications ..........................................................................................................................57
Vision 10/12 Dimensions ..............................................................................................................................59
Video Signal Compatibility ..........................................................................................................................62
viii
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1List of Figures
2-1. Vision 10/12 Top/Front/Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2-2. Vision 10/12 Rear/Top/Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2-3. Vision 10/12 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3-2. Estimating Throw Distance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3-7. HDMI (or DVI) Source Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3-10. Composite and S-Video Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3-11. RS-232 Control System Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4-8. Typical Test Pattern for Adjusting Sharpness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4-9. CIE 1931 Chromaticity Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
4-11. ISF-Enabled Vision 10/12 Splash Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Figures
Notes:
x
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1Introduction
This Owner’s Manual describes how to install, set up and operate the Vidikron Vision
Model 10 and Model 12 DLP Projectors. Throughout this manual, the Vidikron Vision
10/Vision 12 DLP Projector is referred to simply as the “Vision 10/12.”
1.1
About This Manual
Vidikron has prepared this manual to help home theater installers and end users get the
most out of the Vision 10/12.
Target Audience
Vidikron has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
If You Have Comments About
This Manual...
Text Conventions: The following conventions are used in this manual, in order to clarify the
information and instructions provided:
Textual and Graphic
Conventions
•
•
Remote and built-in keypad button identifiers are set in upper-case bold type; for
example, “Press EXIT to return to the previous menu.”
Computer input (commands you type) and output (responses that appear on-screen) is
shown in monospace (fixed-width) type; for example: “To change the aspect ratio to
Letterbox, type RRD02.”
•
All keys with functional names are initial-capped, set in bold type and enclosed in angle
brackets. These keys are the following: <Enter>, <Spacebar>, <Control>,
<Esc>and <Tab>.
• <Enter>indicates that you may press either the RETURN or ENTER key on your keyboard
if it has both keys.
In addition to these conventions, underlining, boldface and/or italics are occasionally used to
highlight important information, as in this example:
A carriage return must be used after each command or string.
Note
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Graphic Conventions: These symbols appear in numerous places throughout the manual,
to emphasize points that you must keep in mind to avoid problems with your equipment or
injury:
TIPS highlight time-saving short cuts and helpful guidelines for using
certain features.
Tip
NOTES emphasize text with unusual importance or special significance.
They also provide supplemental information.
Note
CAUTIONS alert users that a given action or omitted action can degrade
performance or cause a malfunction.
Caution
WARNINGS appear when a given action or omitted action can result in
damage to the equipment, or possible non-fatal injury to the user.
WARNING
DANGER!
DANGER appears when a given action can cause severe injury or death.
Use the following table to locate the specific information you need in this manual.
1.2
Using This Manual
If you need...
... Turn to page:
Information about obtaining service
General information about the Vision 10/Vision 12
DLP Projector
Installation instructions
First-time configuration instructions
Advanced configuration instructions
Troubleshooting tips
Vision 10/Vision 12 DLP Projector specifications
2
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Vidikron proudly introduces its most affordable home
theater projectors to date -- the Vision Model 10 and
Model 12. The Vision 10/12 offers a performance
feature set based on the latest generation of DLP™
light engines with Vidikron’s exclusive Imagix™ video
processing technology to produce outstanding
blacks, superior contrast performance, maximum
screen brightness and an accurate color palette.
1.3
Description, Features and
Benefits
The Vision 10/12 is equipped with a precision optics package (with manual zoom lens) plus
generous horizontal/vertical mechanical lens shift capabilities and electronic keystone
correction for flexible placement within virtually any home theater environment. Among the
finest attributes of the Vision 10/12 is its ability to meet the rigid Imaging Science
Foundation™ (ISF) industry standards for video fidelity and accurate gray scale tracking --
vital to achieving true-to-life color reproduction and superior black and white performance.
The Vision 10/12 accepts high-definition, HDCP-compliant signals from today’s latest digital
sources, and provides a generous array of component, composite, S-video and VGA inputs, as
well as Discrete IR and RS-232 control allowing integration with other audio/video
components and automated control systems.
The Vision 10/12 offers these key features and benefits:
Key Features and Benefits
•
•
•
•
•
Native Resolution: 1024 x 576 (Model 10) or 1280 x 720 (Model 12)
16:9 Native Aspect Ratio
High-performance Digital Light Processing (DLP™) engine
HDMI Input with High-bandwidth Digital Content Protection (HDCP)
HDTV Compatible
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List
Your Vision 10/12 is shipped with the following items. If any items are missing or damaged,
please contact your Vidikron dealer or Vidikron Customer Service at (888) 4VIDIKRON.
➤
•
•
•
•
•
•
•
•
•
•
•
Vision 10/Vision 12 DLP Projector
AC Power Cord (North America)
AC Power Cord (Europe)
Remote Control Unit and two (2), AAA-size batteries
HD 15-pin VGA to HD 15-pin VGA cable
DVI-D to DVI-D cable
DVI-to-HDMI adapter
Composite video cable (RCA)
+12-Volt Trigger adapter (3.5-mm, mini phono plug)
Warranty information and registration card
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual (this document)
Optional Accessories:
Ceiling mount kit
•
4
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1. TOP IR SENSOR
2. VERTICAL LENS SHIFT DIAL
Shifts the image up or down.
3. INTAKE VENT
4. ADJUSTABLE FEET
Use to adjust the height or projection angle.
5. VIDIKRON LOGO
The logo can be rotated to match the projector orientation: inverted (ceiling-mounted)
or upright. To rotate the logo, grip it at the sides, pull it away from the projector and
rotate it 180 degrees.
6. FRONT IR SENSOR
7. FOCUS/ZOOM RING
8. EXHAUST VENT
9. HORIZONTAL LENS SHIFT DIAL
10. TEMPERATURE INDICATOR
Flashes blue when the projector is overheated.
11. POWER INDICATOR
Lights solid blue when the projector is in standby mode; flashes blue during cool-down.
During normal operation, this LED is off.
6
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1. COMPOSITE VIDEO INPUT
Standard composite video input for connecting a VCR, camcorder, laser disc player or
other composite video source.
2. S-VIDEO
Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS
(S-VHS) VCR.
3. COMPONENT VIDEO (RCA connectors)
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component input.
This is the input for component video from sources such as DVD players.
For best results, do not run your DVD player in progressive mode.
Tip
4. RGB HD
A 15-pin VGA connection to a personal computer or HD tuner with an RGB output. The
Vision 10/12 automatically detects the signal resolution: 480p, 576i, 720p or 1080i.
5. HDMI / Computer Input (Digital)
HDCP-compliant digital video input for connecting a DVD player, personal computer or
HD tuner with a DVI or HDMI output.
6. POWER INPUT (100 to 240 VAC)
Connect the Vision 10/12 to power here.
7. RS-232 CONTROL PORT
A female, 9-pin D-sub connector for interfacing with a PC or home theater
automation/control system.
8. 12-VOLT TRIGGER (3.5-mm mini phono jack; Tip = +12V; Sleeve = Ground)
For connecting to retractable screens or other devices that respond to 12-volt triggers.
Outputs +12 volts / 250 milliamps when the projector is turned on.
9. LAMP COVER
10. EXHAUST VENT
8
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2-3 shows the Vision 10/12 remote control, and the paragraphs that follow describe its
functionality.
2.2
Vision 10/12 Remote
Control
1
2
3
4
11
12
5
6
13
14
7
8
9
15
10
Figure 2-3. Vision 10/12 Remote Control
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1. ON / OFF
Press to turn the projector on or off.
2. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
3. Source Selection Buttons:
VIDEO
Press to switch to the Composite video input.
COMP 1 (Component 1)
Press to switch to the Component 1 (480i/576i/720p/1080i) video input.
RGB HD
Press to switch to the RGB HD input.
S-VID 1 (S-Video)
Press to switch to the S-Video input.
COMP 2 (Component 2)
Press to switch to the Component 2 (480i/576i/720p/1080i) video input.
DVI
Press to switch to the Digital Video (HDMI) input.
4. Aspect Ratio Selection Buttons:
ANA (Anamorphic)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4X3 (Standard 4:3)
Scales the input signal to fit 4:3 display mode in the center of the screen.
L-BOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 4:3 screen.
I-WIDE (IntelliWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material on a 1.78:1 (16:9) screen. The upper and lower
portions are masked.
C-FILL (CinemaFill)
Stretches a 2.35 image vertically in both directions to fill a 16:9 screen.
5. DEF
Press to restore factory-default settings for the current source.
6. ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
7. ENTER
Press to select a highlighted menu item or confirm a changed setting.
8. MENU
Press this button to access the on-screen display (OSD) controls.
10
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Not used.
10. LIGHT
Press this button to illuminate the buttons.
11. CUST
Press to recall settings for the current input from the “Custom” memory preset.
12. ISF NIGHT
Press to recall settings for the current input from the “ISF Night” memory preset.
13. Cursor Keys (
Use these buttons to select items or settings, adjust settings or switch display patterns.
14. EXIT
,
,
,
)
Press this button to exit the current menu and return to the previous one.
15. NUMBER KEYS
Use these buttons to enter menu passcodes.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
12
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
3Installation
To install batteries in the remote control:
3.1
Remote Control
1. Press down the tab on the cover and
pull the cover in the direction of the
arrow.
2. Insert the included batteries. Ensure that
the polarities correctly match the
and
markings inside the battery
compartment.
3. Insert the lower tab of the cover into the
opening, and press down the cover until
it clicks in place.
•
•
•
When installing batteries, make sure that the battery polarities are correct.
Do not mix an old battery with a new one or different types of batteries.
Notes on Batteries
If you will not use the remote control for a long time, remove the batteries to avoid
damage from battery leakage.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Remote Control
The remote control can be used to control the projector within the ranges shown in Figure
3-1.
➤
Operation
30°
23'(7 m)
45°
45°
23'(7 m)
30°
Figure 3-1. Available Range of the Remote Control
The signal from the remote control can be reflected by the screen.
Note
•
For best results, hold the remote control within 23 feet (7m) of the back or top sensor and
aligned within 30°.
•
•
Do not drop the remote control or expose it to moisture or high temperature.
The remote control may malfunction under a fluorescent lamp. If that occurs, move the
projector away from the fluorescent lamp.
•
•
•
Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver on the projector.
If the effective range of the remote control decreases, or it stops working, replace the
batteries with new ones.
Ambient conditions may possibly impede the operation of the remote control. If this
happens, point the remote control at the projector, and repeat the operation.
14
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3-1 gives a quick overview of the Vision 10/12 installation process. The sections
following this one provide detailed instructions.
3.2
Quick Setup
Installation should be performed by a qualified custom video installation
specialist.
Note
Table 3-1. Installation Overview
For Details, refer to
page...
Step
Procedure
Choose a location for the projector
1
2
3
4
Connect signal sources to the projector
Connect external controller to RS-232 port (optional)
Apply power to the projector
For rear-screen and/or ceiling-mount installations, select the
proper picture orientation
5
6
Lens adjustments: projected image size (zoom), position
(shift) and focus
Projector calibration: adjust the following for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
7
• Color level
• Tint
• Input position
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Proper installation of your projector will ensure the quality of your display. Whether you are
installing a projector temporarily or permanently, you should take the following into account
to ensure your projector performs optimally.
3.3
Installation Considerations
Installation Type
Choose the installation type that best suits your needs: front or rear screen, floor mount or
➤
Table 3-2. Projector Installation Options
Advantages
Front Screen, Floor Mount Installation
• Shares floor space with audience
Considerations
• Easy to set up
• Can be moved or changed quickly
• Easy to access
Front Screen, Inverted Mount (ceiling) Installation
• Does not take up audience space
• Projector is unobtrusive
• Installation is more permanent
• Projector access is more difficult
• Projector cannot be accidentally moved
Rear Screen, Floor Mount Installation
• Projector is completely hidden
• Projector is easily accessed
• Requires separate room
• Installation cost is usually higher
• Usually good ambient light rejection
Rear Screen, Inverted Mount (ceiling) Installation
• Projector is completely hidden
• Requires separate room
• Usually good ambient light rejection
• Installation cost is usually higher
Rear Screen, Floor Mount with Mirror
• Projector is completely hidden
• Usually good ambient light rejection
• Requires less space behind screen than other
rear screen installations
• Requires separate room
• Installation cost is usually higher
Ambient Light
In general, minimize or eliminate light sources directed at the screen. Contrast ratio in your
images will be noticeably reduced if light directly strikes the screen, such as when a shaft of
light from a window or floodlight falls on the image. Images may then appear washed out
and less vibrant.
➤
➤
Other Considerations
Other considerations and tips that can help improve your installation:
•
•
Keep the ambient temperature constant and below 35°C (95°F). Keep the projector away
from heating and/or air conditioning vents. Changes in temperature may cause drifts in
the projector circuitry, which may affect performance.
Keep the projector away from devices that radiate electromagnetic energy such as motors
and transformers. Common sources of these include slide projectors, speakers, power
amplifiers and elevators.
16
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Throw distance is the distance measured from the front of the projector to the screen. This is
an important calculation in any projector installation as it determines whether or not you
have enough room to install your projector with a desired screen size and if your image will
be the right size for your screen.
Throw Distance
You can quickly estimate the throw distance by taking the width of the screen and
•
•
The Vision 10 has a lens throw ratio of between 1.40 and 1.60.
The Vision 12 has a lens throw ratio of between 1.42 and 1.65.
The result of this calculation tells you roughly how far back the projector should be
positioned from the screen in order to project a focused image large enough to fill the
screen.
For example, with an 8-foot (96-inch) wide screen:
•
The Vision 10 has a throw distance range of between 134.4 inches (3.41 meters) and 153.6
inches (3.90 meters).
•
The Vision 12 has a throw distance range of between 136.3 inches (3.46 meters) and 158.4
inches (4.02 meters).
Estimating Throw Distance (TD)
Vision Model 10
Minimum TD = Screen Width x 1.40
Maximum TD = Screen Width x 1.60
Vision Model 12
Minimum TD = Screen Width x 1.42
Maximum TD = Screen Width x 1.65
Figure 3-2. Estimating Throw Distance
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Vertical and Horizontal
Proper placement of the projector relative to the screen will yield a rectangular,
perfectly-centered image that completely fills the screen.
➤
Position
Ideally, the projector should be positioned perpendicular to the screen and in such a way
Ceiling Installation
Ceiling
Height
Projection Distance
Lens Center
x
Screen Lens Center
Floor Installation
Screen
Lens Center
Height
Lens Center
x
Projection Distance
Floor
Figure 3-3. Projector Placement
Vertical and Horizontal Lens
Shift
lens shift controls to center the image on the screen. Lens shift is generally expressed as a
➤
Screen Center
0%
50% Height
Lens Shift
(0.5 x H)
Base plate
to lens center =
approx. 4" (depending
on the amount of lens shift)
100% Height
Lens Shift
(1.0 x H)
150% Height
Lens Shift
(1.5 x H)
Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular lens or
projector is used in this example.
Figure 3-4. Vertical Lens Shift (Example only)
18
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
150% Width Lens Shift
(1.5 x W)
100% Width Lens Shift
(1.0 x W)
50% Width Lens Shift
(0.5 x W)
Screen Center
0%
Screen Width (W)
Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular lens or
projector is used in this example.
Figure 3-5. Horizontal Lens Shift (Example only)
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3-3 gives the lens shift limits for the Vision 10 and Vision 12, as percentages and
absolute measurements with a 96 x 54 inch (1.78:1) screen.
Table 3-3. Vertical and Horizontal Lens Shift Limits
Vision 10
Vision 12
Lens Shift Limits, as Percentages of Screen Height or Width (Notes 1 and 2)
Up
Down
Left
40%
60%
46%
63%
Vertical
(Notes 2 and 3)
8%
8%
Horizontal
(Note 2)
Right
Lens Shift Limits in Inches, with a 96-by-54 inch (1.78:1) Screen
Up
Down
Left
21.60
32.40
24.84
34.02
Vertical
7.68
7.68
Horizontal
Right
Notes:
1. With no vertical or horizontal lens shift, the lens center and screen center are aligned with each other.
2. Vertical shift limits are percentages of the screen height. Horizontal shift limits are percentages of the
screen width.
3. Vertical lens shift figures apply to ceiling mount configurations. For floor installations (where the
projector is upright), reverse the up/down vertical offset percentages.
Adjusting the Projection
If the screen is significantly higher or lower than the projector, you can also tilt the projector
at a slight angle. In a ceiling installation, you do this by adjusting the ceiling mount. For a
floor installation, turn the four adjustable feet on the bottom of the projector to adjust the
projector height and/or projection angle.
➤
Angle
If you do this, you may need to shift the image or apply keystone correction using the
on-screen display (OSD) controls, to compensate. For detailed instructions, refer to Using the
20
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
There are several methods for mounting the projector. Depending on your chosen
installation, one method may be more suitable than another.
Mounting
Floor Mounting: In typical front and rear screen installations the projector can be mounted
to a secure and level surface, such as a table or cart. Carts are useful when moving a projector
during a presentation or from site to site. If possible, lock the wheels when it’s in position to
prevent it from being moved during a presentation.
Ceiling Mounting: The projector can also be inverted and suspended from the ceiling using
a specially designed ceiling mount fixture. This type of mounting is recommended for fixed
installations and for those that want the projector out of sight or have a limited space for
projector and audience.
Use only the Vidikron-approved ceiling mount kit designed for your
projector.
Note
In rear-screen applications where space behind the projector is limited, a mirror may be used
be accurately set. If you are considering this type of installation, contact your dealer for
assistance.
Folded Optics
Screen
Mirror
Figure 3-6. Folded Optics
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Proceed as follows to connect the Vision 10/12 to your video sources, external controller(s) –
if present – and AC power.
3.4
Connections to the Vision
10/12
When connecting your equipment:
•
•
•
Turn off all equipment before making any connections.
Use the correct signal cables for each source.
Ensure that the cables are securely connected. Tighten the thumbscrews on connectors
that have them.
Route all cables through the opening on the rear underside of the
projector. This allows you to keep the connector panel access door closed,
making for a more tidy installation.
Tip
Connector Panel Access
To access the connector panel, press and hold the black door release button. Then, pull
gently on it to open the door.
➤
Connecting the Vision 10/12
to Source Components
Connect your video sources to the Vision 10/12 as shown and described in the sections that
follow.
➤
HDMI Connections: The Vision 10/12 has an HDMI input for connecting a DVD player, DTV
decoder, personal computer or any other device with a DVI or HDMI output. Connect such
Use the HDMI inputs whenever possible. This ensures the highest video
quality because the signal is carried in the digital domain throughout the
entire signal path, from source component output into the projector.
Tip
The Vision 10/12 supports the VESA Display Data Channel (DDC) standard.
This standard provides “Plug and Play” capability; the projector and a
VESA DDC-compatible computer communicate their setting requirements,
allowing for quick and easy setup.
Note
In order for Plug and Play to work correctly, you must turn on the projector
before you turn on the connected computer.
22
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
COMP 1
COMP 2
RGB-HD
VIDEO
S-VIDEO
P
R/
CR
PB/
CB
Y
P
R/
CR
P
B/
CB
Y
HDMI
R G B - H D
V I D E O
S - V I D E R O C / R P
B C / B P
1
Y
R C / R P
B C / B P
2
Y
H D M I
C O M P
C O M P
RS-232
R S - 2 3 2
HDMI or DVI Source
(DVD Player
or HD Set Top Box)
Note: To connect a DVI source, use the HDMI-to-DVI adapter and DVI cable provided with the projector.
Figure 3-7. HDMI (or DVI) Source Connections
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
23
Download from Www.Somanuals.com. All Manuals Search And Download.
RGB-HD Connections: The Vision 10/12 has an RGB input for connecting a personal
COMP 1
COMP 2
RGB-HD
VIDEO
S-VIDEO
P
R/
CR
PB/
CB
Y
P
R/
CR
P
B/
CB
Y
HDMI
R G B - H D
V I D E O
S - V I D E R O C / R P
B C / B P
1
Y
R C / R P
B C / B P
2
Y
H D M I
C O M P
C O M P
RS-232
R S - 2 3 2
Personal
Computer
Figure 3-8. Analog RGB Connections
computer signals compatible with the Vision 10/12. Use with signals
other than those listed may cause some functions not to work.
Note
2. Some Macintosh computers may require a Macintosh video adapter.
Contact your nearest authorized service center or dealer.
3. This Vision 10/12 may not be able to display images from notebook
computers in simultaneous (CRT/LCD) mode. Should this occur, switch
the notebook computer to “CRT only” mode. If you are unsure how to do
this, refer to your notebook computer’s user manual.
24
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Component Video Connections: If you have a DVD player or DTV decoder with a
component (YPbPr) output, connect it to the COMP 1 or COMP 2 input as shown in
COMP 1
COMP 2
RGB-HD
VIDEO
S-VIDEO
PR/
CR
PB/
CB
Y
P
R/
CR
P
B/
CB
Y
HDMI
R G B - H D
V I D E O
S - V I D E R O C / R P
B C / B P
1
Y
R C / R P
B C / B P
2
Y
H D M I
C O M P
C O M P
RS-232
R S - 2 3 2
Pr/Cr Pb/Cb
Y
Component
Video Source
(DVD Player
or HD Set Top Box)
Figure 3-9. Component Video Connections
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Composite/S-Video Connections: The Vision 10/12 has S-Video and composite video
inputs for connecting a DVD player, VCR, satellite receiver, camcorder, laser disc player et
COMP 1
COMP 2
RGB-HD
VIDEO
S-VIDEO
PR/
CR
P
B/
CB
Y
PR/
CR
PB/
CB
Y
HDMI
R G B - H D
V I D E O
S - V I D E R O C / R P
B C / B P
1
Y
R C / R P
B C / B P
2
Y
H D M I
C O M P
C O M P
RS-232
R S - 2 3 2
Composite S-Video
DVD Player, VCR,
Satellite Receiver
etc.
Figure 3-10. Composite and S-Video Connections
26
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation
RS-232 Controller
Connection
COMP 1
COMP 2
RGB-HD
VIDEO
S-VIDEO
P
R/
CR
PB/
CB
Y
P
R/
CR
P
B/
CB
Y
HDMI
R G B - H D
V I D E O
S - V I D E R O C / R P
B C / B P
1
Y
R C / R P
B C / B P
2
Y
H D M I
C O M P
C O M P
RS-232
R S - 2 3 2
5
4
3
2
1
9
8
6
7
2 Transmit Data
3 Receive Data
5 Ground
All others = not used
To PC or Automation/
Control System
Figure 3-11. RS-232 Control System Connection
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the 12-Volt
If your home theater contains a retractable screen or other, 12-Volt trigger-activated
equipment, connect it to the 12-volt trigger output on the Vision 10/12 as shown in Figure
3-12.
➤
Trigger Output
COMP 1
COMP 2
RGB-HD
VIDEO
S-VIDEO
P
R/
CR
PB/
CB
Y
P
R/
CR
P
B/
CB
Y
HDMI
R G B - H D
V I D E O
S - V I D E R O C / R P
B C / B P
1
Y
R C / R P
B C / B P
2
Y
H D M I
C O M P
C O M P
RS-232
R S - 2 3 2
Retractable Screen
or other, 12-volt
trigger-activated equipment
3.5-mm
mini plug
Black = Ground (Sleeve)
Red = +12V (Tip)
Figure 3-12. Connecting the 12-Volt Trigger Output
28
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
4Operation
1. Turn on your source components.
4.1
Turning on the Power
2. Plug the female end of the power cord
into the AC receptacle on the rear of the
Vision 10/12 (AC 100V ~ 240V).
3. Connect the other end to your AC power
source. The power indicator lights blue to
indicate that the Vision 10/12 is in
“standby” mode.
4. Press the ON button on the remote
control to turn on the projector. The
power indicator turns off.
5. After a brief warm-up period (approximately 10 seconds), the Vision 10/12 will start
projecting.
When the Vision 10/12 is installed upright, you can adjust the projector height or projection
is useful for correcting the angle of projection when the projector is placed on an uneven
surface or when the screen is at an angle. You can tilt the projector up to five (5) degrees up
or down by adjusting the feet.
4.2
Adjusting the Projector
Height or Projection Angle
The feet are connected to threaded bolts; turn them clockwise to raise the projector or
counterclockwise to lower it.
Tilting the projector may cause keystone distortion. To correct this, refer
Note
Figure 4-1. Adjusting the Feet
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
29
Download from Www.Somanuals.com. All Manuals Search And Download.
The Vision 10/12 OSD language is initially set to English, but can also display the menus in
French, Italian, German or Spanish. To change the OSD language:
4.3
Changing the OSD
Language
1. Press MENU.
2. Select Installation from the Main Menu.
3. Select Language from the Installation Menu.
4. Press or to select the desired language. The change takes effect immediately.
By default, the Vision 10/12 is configured for a “floor/front” installation, in which the
projector is installed upright and in front of the screen. If it is installed behind the screen
and/or mounted on a ceiling, you must change the picture orientation. To do this:
4.4
Adjusting the Picture
Orientation
1. Press MENU.
2. Select Installation from the Main Menu.
3. Select Picture Configuration from the Installation Menu.
4. Choose Floor Rear, Ceiling Front or Ceiling Rear, to match the installation method.
30
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The Vision 10/12 gives you a great deal of control over the picture size, position and focus.
of the lens shift controls.
4.5
Lens Adjustments
To focus the projected image, rotate the focus ring left or right.
Focus/Zoom
To make the picture larger (zoom in), rotate the zoom ring to the left, toward the Vidikron
logo. To make the picture smaller (zoom out), rotate the zoom ring to the right.
Zoom
Ring
Focus
Ring
Focus ring
Zoom ring
Zoom out
Zoom in
Figure 4-2. Focus and Zoom Controls
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Shift
To change the projected image position, rotate the vertical and/or horizontal lens shift dials.
➤
Do not force the lens shift dials beyond their respective ranges. This may
cause the projector to malfunction.
Note
Lens shift dial
(Horizontal)
Lens shift dial
(Vertical)
Figure 4-3. Vertical and Horizontal Lens Shift Controls
To use the on-screen menus:
4.6
Using the On-Screen
Menus
1. Press MENU to display the Main Menu.
2. To select a menu item, use the up- or down-arrow buttons (
control to highlight it.
,
) on the remote
3. Press the right- or left-arrow button ( or , depending on the OSD position) to access
that menu.
4. Use the up- or down-arrow buttons (
5. Press the right- or left-arrow button (
,
) to select the setting you want to change.
) to change that setting;
,
-- OR --
With some settings, you can press ENTER to hide the OSD menus and display a slidebar
for that setting only. Then, press the right- or left-arrow button (
,
) to change it.
6. To return to the previous menu, press EXIT.
on the selected input source, some menu options may not be available.
32
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Brightness
Contrast
Color
Brightness
Contrast
Color
(not available on HDMI or RGB-HD
inputs)
(not available on HDMI or RGB-HD
inputs)
Tint
Tint
Sharpness
Gamma
Color Temp
ICC Select
1, 2, 3, 4, 5
Sharpness
Gamma
1, 2, 3, 4, 5
1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, 2.8
Native, 5,000K, 5,500K, ... 10,000K
Standard, NTSC, HDTV, PAL
R/G/B Gain
1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, 2.8
Native, 5,000K, 5,500K, ... 10,000K
Custom 1, ISF Day, ISF Night
R/G/B Gain
Picture Adjust
Color Temp
Load Saved Settings
ISF Settings
White Balance
White Balance
R/G/B Offset
R/G/B Offset
Save Settings
Load Saved Settings
Video
Save Settings
Custom 1, ISF Day, ISF Night
Lamp Timer Reset
Standard, NTSC, HDTV, PAL
Intensity, Saturation, Hue
ICC Adjust
S-Video
ISF Enable
(on/off)
Component 1
Component 2
RGB-HD
Source Select
Aspect Ratio
Blue Enable
(on/off)
Splash Screen Timer
Noise Reduction
15, 20, 25, 30, ... 60 secs.
0, 1, 2, ... 8
HDMI/DVI
Anamorphic (16/9)
Standard (4/3) (not
available with HD signals)
LetterBox
IntelliWide
Cinema
Cinema Fill
Clock
Phase
HD/RGB Adjust
(available only when
RGB-HD input is selected)
Reset
Execute Auto Tune
Auto Tune
H Position
V Position
Image Position (not
available on HDMI input)
Reset
Over Scan Adjust
0% to 10%
Chroma Enhance
Video On Film (on/off)
Film Mode
(on/off)
Image Option
SDTV Adjust
(not available on HDMI or
RGB-HD inputs)
Brightness Enhance
Lamp Power
200W or 250W
Source, Resolution, V Frequency,
H Frequency, Lamp Timer, firmware
version
Information (read-only)
Restore Factory Settings
Language
English, French, Italian, German or
Spanish
Floor Front, Ceiling Rear, Floor Rear
or Ceiling Front
Picture Configuration
OSD Timeout
OSD Transparent
Source Detect
Auto Power Off
Blue Enable
5 secs., 15 secs. or 60 secs.
(on/off)
Auto or Manual
(on/off)
Installation
(on/off)
Top Left, Bottom Left, Top Right or
Bottom Right
OSD Position
V Keystone
H Keystone
Reset
Keystone
Fan High Speed Mode
(on/off)
Figure 4-4. Vision 10/12 OSD Menu Structure
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu
The Main Menu is the starting point for accessing all projector functions.
➤
(The ISF Settings menu is grayed out and not accessible until you enter a passcode.)
Vision Model 10
Picture Adjust
Source select
Aspect Ratio
Image Option
Installation
ISF Settings
Source Select
From the Main Menu, select Source select to choose a video signal source.
➤
The active source is indicated by a green square (Q) to its left; in the example at left, Video is
the active source.
Source select
Video
Q
S-Video
Component 1
Component 2
RGB-HD
HDMI/DVI
Aspect Ratio
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from
the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program
➤
Aspect Ratio
Anamorphic (16/9)
Standard (4/3)
LetterBox
Q
The currently-selected aspect ratio is indicated by a green square (Q) to its left; in the
example at left, Anamorphic is selected.
IntelliWide
When you change the aspect ratio, save the change to a preset
Cinema
Note
afterwards. Otherwise, the change will be lost when a different input is
selected. (The aspect ratio is saved for each input and resolution
separately.) For information about saving settings, refer to Save
Cinema Fill
34
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 4-1. Aspect Ratio Settings
Remote
Aspect Ratio
Control
Key
Description
Anamorphic
(16/9)
ANA
Select Anamorphic to view
16:9 DVDs and HDTV
programs in their native
aspect ratio. 4:3 images are
stretched horizontally to fit a
16:9 screen.
16:9 Image on
16:9 Screen
4:3 Image on
16:9 Screen
Standard (4/3)
4X3
Standard 4:3 scales the input
signal to fit in the center of
the 16:9 screen. 4:3 is the
aspect ratio used by
computer monitors, standard
television programming and
most VHS video cassettes.
Active Image
Area (4:3)
This aspect ratio is not
available with HD signals.
LetterBox
LET
BOX
In Letterbox mode, the
image is stretched vertically;
the top and bottom portions
are "blanked off." Letterbox is
best suited for viewing
LaserDisc movies or
Letterbox Image on
16:9 Screen
non-anamorphic DVDs on a
4:3 screen.
IntelliWide
I-WIDE
A 4:3 image is horizontally
scaled in a NON-linear
fashion (more on the sides
than in the center) to fit a
16x9 screen.
Cinema
CINEMA
Select Cinema to view 2.35
source material on a 16:9
screen. The upper and lower
portions of the screen are
masked, but the geometry of
the active image area is not
changed.
2.35:1 Image on
16:9 Screen
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 4-1. Aspect Ratio Settings (continued)
Remote
Aspect Ratio
Control
Key
Description
Cinema Fill
C-FILL
A 2.35 image is stretched
anamorphically in both
directions to fill a 16:9 image.
2.35:1 Image on
16:9 Screen
2.35:1 Image on
16:9 Screen with
Cinema Fill
Picture Adjust
Use the controls in the Picture Adjust menu to calibrate your Vision 10/12 for optimum
picture quality.
➤
Picture Adjust
The Vision 10/12 has been designed to incorporate setup and calibration standards
established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted,
industry-recognized standards for optimal video performance and has implemented a
training program for technicians and installers to use these standards to obtain optimal
picture quality from Vidikron video display devices. Accordingly, Vidikron recommends that
setup and calibration be performed by an ISF certified installation technician.
Brightness
Contrast
0
0
0
0
Color
Tint
Sharpness
Gamma
3
2.2
All signal types require separate processing. Therefore, you need to calibrate each input
separately. Vidikron recommends calibrating the Vision 10/12 inputs in the following order:
Color Temp
ICC Select
White Balance
Save Settings
Load Saved Settings
6500K
Standard
1. Component 1 / Component 2
2. S-Video
3. Video
4. RGB-HD
5. HDMI
When you change a picture quality setting, save the change to a preset
Note
afterwards. Otherwise, the change will be lost when a different input is
selected. (Picture quality settings are saved for each input and resolution
separately.) For information about saving settings, refer to Installation
Although it may be possible to obtain satisfactory picture quality using the naked eye and
regular program material, Vidikron recommends using the following calibration tools for
best results:
•
External test pattern source -- Sencore VP401 Multimedia Video Generator, Ovation
Multimedia test DVD or equivalent.
•
A blue filter (provided with many test DVDs), for color level and tint adjustments.
36
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect your test pattern source to the input that you are calibrating and proceed as follows.
Perform the adjustments in the order listed here.
Brightness: On your external test pattern source, select a PLUGE pattern. (PLUGE is an
pattern.
Below Black
Above Black
Figure 4-5. Typical PLUGE Pattern for Adjusting Brightness
PLUGE patterns vary but generally consist of some combination of black, white and gray
areas against a black background. The example above includes two vertical bars and four
shaded boxes.
Select Brightness from the Picture Adjust menu. Using the left- and right-arrow (
buttons, adjust the brightness so that:
)
•
•
•
•
•
The darkest black bars disappear into the background.
The dark gray areas are barely visible.
The lighter gray areas are clearly visible.
The white areas are a comfortable level of true white.
The image contains only black, gray and white (no color).
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast: On your external test pattern source, select a stepped, gray-bar pattern like the
Figure 4-6. Typical Gray Bar Pattern for Adjusting Contrast
Select Contrast from the Picture Adjust menu. Using the left- and right-arrow (
)
buttons, adjust the contrast to a point just below which the white rectangle starts to increase
in size.
Brightness and contrast controls are interactive. A change to one may
require a subtle change to the other in order to achieve the optimum
setting.
Note
Color Saturation: On your external test pattern source, select a color bar pattern like the one
Figure 4-7. Typical Color Bar Pattern for Adjusting Color Saturation and Tint
38
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Color from the Picture Adjust menu. While looking at the color bar pattern through a
blue filter, adjust the color saturation level until the outermost (gray and blue) color bars
appear to be a single shade of blue:
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image.
When tint is decreased, the image appears redder; when it is increased the image appears
greener. To set the tint, select Tint from the Picture Adjust menu. While looking at the color
bar pattern through a blue filter, adjust the tint level until the cyan and magenta color bars
(on either side of the green bar) appear to be a single shade of blue.
1. Like the brightness and contrast controls, the color and tint controls
are interactive. A change to one may require a subtle change to the
other in order to achieve the optimum setting.
Note
2. Color and tint controls are not available on the HDMI or RGB-HD
inputs.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharpness: “Sharpness” is the amount of high-frequency detail in the image. To adjust
sharpness, select Sharpness from the Picture Adjust menu and press ENTER. On your
needed, looking for white edges around the transitions from black to gray and different sized
lines in the “sweep” patterns at the top and bottom. Lower the sharpness setting to eliminate
them.
Figure 4-8. Typical Test Pattern for Adjusting Sharpness
Gamma: The Gamma control determines how gray shades are displayed between minimum
input (black) and maximum input (white) for all signals. A good gamma setting helps to
optimize blacks and whites while ensuring smooth transitions for the “in-between” values
utilized in other grays.
Unlike brightness and contrast controls, Gamma allows you to lighten or darken the overall
tone of your images without changing the extremes. All images will be more vibrant while
still showing good detail in dark areas.
The default Gamma setting is appropriate for most typical home cinema environments.
40
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Temperature: To adjust the color temperature, select Color Temp from the Picture
Adjust menu and press ENTER. (Color temperature defines the “color of gray.”) The range is
from 5,000K to 10,000K, in increments of 500K. The default setting, 6,500K, is appropriate for
most situations. Higher settings produce a “bluer” picture; lower ones impart a reddish hue
to the image.
Color Temp
6500K
x
0
0
y
Reset Color Temp
For more precise control over the color temperature, you can adjust the x and y coordinates
for gray. These define its location on the standard CIE chromaticity graph, shown in Figure
4-9. (CIE stands for “Commission Internationale de l’Éclairage” (International Commission on
Illumination), the organization responsible for color measurement and management
standards.) Changing either or both of these numbers changes the hue of gray, within a
Table 4-2. Effect of X and Y Coordinates for Color Temperature
X-adjustment
Y-adjustment
Result
red hues
blue hues
green hues
yellow hues
To restore the default color temperature, select Reset Color Temp and press ENTER. Press
ENTER again to confirm.
1.0
y
0.9
0.8
0.7
0.6
0.5
0.4
D50
D65
D93
0.3
0.2
0.1
0.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
x
1.0
Figure 4-9. CIE 1931 Chromaticity Diagram
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
41
Download from Www.Somanuals.com. All Manuals Search And Download.
ICC Select: Choose ICC Select from the Picture Adjust menu to specify the color space
(Standard, NTSC, HDTV or PAL) that is appropriate for the source signal, to achieve optimal
color balance.
If you select NTSC, HDTV or PAL, you can make further adjustments to individual color space
this section. (The Standard color space is factory-set and not adjustable.)
White Balance: To remove any trace of color from the white areas of the projected image,
choose White Balance from the Picture Adjust menu and press ENTER.
White Balance
•
Gain: Use the Gain controls to correct color imbalances in the bright areas of the image. A
good way to do this is to use a test pattern consisting mostly of solid white areas, such as
an 80 IRE “window” pattern. If the white areas contain traces of red, green or blue,
decrease the Gain for that color.
R Gain
0
0
0
0
0
0
G Gain
B Gain
R Offset
G Offset
B Offset
•
Offset: Use the Offset controls in the White Balance sub-menu to correct color imbalances
in the dark areas of the image. A good way to do this is to use a test pattern consisting
mostly of dark gray areas, such as a 30 IRE “window” pattern. If the gray areas contain
traces of red, green or blue, decrease the Offset for that color.
Save Settings: The Vision 10/12 lets you save image quality settings for each input and
supported resolution to a preset. You can recall this preset at a later time by simply pressing a
button on the remote control or using the Load Saved Settings menu command (see below).
You should save changes to any of the following settings to a preset; otherwise they will be
lost when a new input source or resolution is selected:
•
•
Aspect ratio
Picture adjustments (brightness, contrast, color saturation, tint, sharpness, gamma, color
temperature, ICC selection and white balance settings)
•
Image options (SDTV adjust settings, brightness enhance, lamp power)
Load Saved Settings: To recall a preset, choose Load Saved Settings from the Picture Adjust
menu and select “Custom1,” “ISF Day” or “ISF Night.” Or, use the corresponding buttons on
the remote control.
Image Option
Use the controls in the Image Option menu to perform advanced image quality adjustments,
obtain information about the projector or perform a factory reset.
➤
Image Option
HD/RGB Adjust: To improve the quality of projected images from a computer or other
HD/RGB Adjust
Image Position
Over Scan Adjust
SDTV Adjust
analog RGB source, select HD/RGB Adjust and press ENTER.
•
Clock: If you notice flickering or vertical noise when displaying computer images, adjust
1%
the Clock setting to correct the issue.
•
Phase: Adjust the phase if the image shows shimmer or “horizontal” noise. Pixel phase
adjusts the phase of the pixel sampling clock relative to the incoming signal. The effect of
this control is similar to that of a tracking control on a VCR.
Brightness Enhance
Lamp Power
OFF
250W
Information
Restore Factory Settings
For best results, use a good test pattern such as a smooth gray consisting of a clear pattern
of black and white pixels, or a similar “half on, half off” graphic image. (You may notice
that you can stabilize the image at more than one point. Use either setting in this case.)
To restore the original Clock and Phase settings, select Reset and press ENTER, then press
ENTER again to confirm the reset.
42
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Auto Tune: Auto Tune automatically adjusts settings to optimize computer images. Auto
Tune can be executed either on command or automatically whenever an incoming RGB
signal is present. To execute Auto Tune on command, select Execute Auto Tune and press
ENTER. To enable automatic Auto Tune, select Auto Tune and set it to ON.
Auto Tune may take some time to complete, depending on the
characteristics of the incoming signal.
Note
Image Position: To adjust the horizontal and vertical position of the projected image, select
Image Position from the Image Option menu and press ENTER.
•
H Position: Use the up- or down-arrow buttons (
,
) to select H Position. Then, use the
right-arrow button ( ) to shift the image to the right; use the left-arrow button ( ) to
shift the image to the left.
•
V Position: Use the up- or down-arrow buttons (
,
) to select V Position. Then, use the
right-arrow button ( ) to shift the image up; use the left-arrow button ( ) to shift the
image down.
To restore the default image position, select Reset and press ENTER. Then, press ENTER to
confirm or EXIT to cancel.
Over Scan Adjust: Overscan pushes the outside edge of the active picture area of the video
signal out beyond the edge of the display area.
Some television programs are produced based on the assumption that older television sets
may not display the outer edges of the broadcast picture area. Over scan effectively trims
away these inactive, outer edges and enlarges the remaining portion of the image to fill the
display area.
Select from 0% to 10% of Overscan, as desired.
For HDTV, DVDs and other video sources, Overscan is generally not necessary or desirable.
SDTV Adjust: To maximize the quality of 480i (composite, S-Video or component) video
signals, select SDTV Adjust from the Image Option menu and press ENTER.
•
•
•
Chroma Enhance: Use Chroma Enhance to add chroma (color information) to the input
signal, making colors appear more vibrant and saturated.
Video On Film: Set Video On Film to ON to repair distortions or abnormalities in a video
image.
Film Mode: Use the Film Mode control to smooth out moving images from interlaced
sources. In most cases, the Vision 10/12 detects the proper “pull-down” rate and vertical
frequency. However, if your source is jittery and/or tearing you may wish to force a setting
to ensure stable processing for that source.
Brightness Enhance: to amplify the bright areas of the image, select Brightness Enhance
and use the right- or left-arrow button ( or ) to set it to ON. Brightness Enhance can be
useful for high ambient light environments or when you use the lower Lamp Power setting
(see below).
Lamp Power: Select Lamp Power from the Display Color Menu to adjust the lamp output
level. You can choose to run the lamp as bright as possible (250W; this is the default setting)
or you can choose the lower setting (200W). Generally, lower lamp output can prolong the
life of the lamp, but decreases brightness.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Information: Select Information from the Main Menu to see information about the current
source, input resolution, horizontal and vertical frequencies, lamp hours and the installed
firmware version.
Source
:
Component 1
720 x 480
60 Hz
Resolution:
Vert Freq :
Should you ever need to contact Vidikron Technical Support, this information will help them
answer your questions or resolve product performance issues.
Horz Freq :
Lamp Timer :
F/W Version :
31 kHz
720 HR
226.4.150
Restore Factory Settings: To reset all items in the Image Options menu to their factory
default values, select Restore Factory Settings and press ENTER. A warning message appears;
press ENTER again to confirm the reset or press EXIT to cancel. After the reset, the projector
powers off and restarts.
Installation
The Installation menu to change the picture orientation, appearance and behavior of the
OSD menus, fan speed and other projector settings.
➤
Installation
Language: Select Language from the Installation menu and press the right- or left-arrow
buttons to select the OSD language (English, French, Italian, German or Spanish).
Language
English
Floor Front
5 secs
OFF
Picture Configuration
OSD Timeout
Picture Configuration: Select Picture Configuration from the Installation menu to change
the picture orientation to suit the method of installation (Floor Front, Floor Rear, Ceiling
Front or Ceiling Rear).
OSD Transparent
Source Detect
Auto Power Off
Blue Enable
Auto
OFF
OSD Timeout: The OSD Timeout setting controls how long the OSD menus stay on screen
when no buttons are pressed. Select a time-out period of 5, 15 or 60 seconds.
OFF
OSD Position
OSD Transparent: To allow the projected image to show through the OSD menus, select
Keystone
OSD Transparent from the Installation menu and set it to ON.
Fan High Speed Mode
ON
Source Detect: The Vision 10/12 can automatically detect an incoming signal and switch to
that input. To enable automatic source detection, select Source Detect from the Installation
menu and set it to Auto.
Auto Power Off: The Vision 10/12 can be set to power off automatically after 15 minutes of
no input signal or user input via the remote control. To enable this feature, set it to ON. When
you do, a warning message appears on-screen five minutes before the shutdown is to occur.
To prevent the projector from powering off, press any key on the remote control.
Blue Enable: Blue Enable removes all red and green color information from the image,
simulating a blue filter. You can use it instead of a blue filter when performing color and tint
adjustments.
OSD Position: To change the position of the OSD controls, select OSD Position from the
Installation menu. Use the up- and down-arrow buttons to select Top Left, Bottom Left, Top
Right or Bottom Right, then press ENTER.
44
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Keystone Correction: If the projector and screen are not installed perpendicular to each
Select Keystone from the Installation menu to compensate for this.
Horizontal Keystone Correction
Projected Image
Projector
Positive values compress right side;
Negative values compress left side.
Vertical Keystone Correction
Positive values compress top;
negative values compress bottom.
Figure 4-10. Horizonal and Vertical Keystone Correction
1. The Vision 10/12 keystone correction can compensate for up to
approximately 15 degrees of screen and/or projector tilt.
Note
2. Straight lines or the edges of images may appear jagged while
adjusting the image.
3. Keystone correction is not possible with a 1080i input signal.
Fan High Speed Mode: If the projector is being used in a high-altitude environment, use Fan
High Speed Mode to prevent it from overheating. Set Fan High Speed Mode to ON to run the
fan at high speed; set it to OFF to run the fan at normal speed.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
45
Download from Www.Somanuals.com. All Manuals Search And Download.
ISF Settings
Use the ISF Settings menu to perform advanced picture quality adjustments. This menu
should be used by ISF-certified technicians only.
➤
ISF Calibration
Brightness
0
0
0
0
You must enter a passcode to access the ISF Settings menu.
Contrast
Note
Color
Tint
Sharpness
3
accessible only by entering the ISF Calibration menu passcode. This makes it possible to
restore the picture quality settings to what they were when the projector was installed,
simply by recalling the “ISF Night” or “ISF Day” preset.
Gamma
2.2
Color Temp
Load Saved Settings
White Balance
Save Settings
Lamp Timer Reset
ICC Adjust
6500K
Standard
OFF
ISF Enable
Blue Enable
Splash Screen Timer
Noise Reduction
OFF
60 secs
4
Load Saved Settings: To recall the Custom1, ISF Night or ISF Day settings, choose Load
Saved Settings from the ISF Calibration menu. Then, select “Custom1,” “ISF Night” or “ISF
Day” and press ENTER, or use the corresponding buttons on the remote control.
Save Settings: For each input and supported resolution, the Vision 10/12 lets you save
image quality settings as presets that you can recall at a later time. You can create up to three
presets -- designated “Custom1,” “ISF Day” and “ISF Night” -- per input and resolution.
You should save changes to any of the following settings to a preset; otherwise they will be
lost when a new input source or resolution is selected:
•
•
Aspect ratio
Picture adjustments (brightness, contrast, color saturation, tint, sharpness, gamma, color
temperature, ICC selection and white balance settings)
•
Image options (SDTV adjust settings, brightness enhance, lamp power)
To save image settings in the “ISF Day” or “ISF Night” preset, select Save Settings from the ISF
Calibration menu and select “ISF Day” or “ISF Night.” (To save settings to the “Custom1”
Lamp Timer Reset: When you replace the projector lamp, you should also reset the lamp
hour counter. To do this, select Lamp Timer Reset from the ISF Calibration menu and press
ENTER. The Vision 10/12 shows the number of hours the projector lamp has been in service
and asks you to confirm or cancel the reset. Press ENTER to confirm or EXIT to cancel.
46
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ICC Adjust: Use the ICC Adjust controls to customize the stored NTSC, HDTV and/or PAL
color space characteristics. To do this:
1. Select ICC Adjust from the ISF Calibration menu and press ENTER.
2. Select the color space to modify using the left- or right-arrow buttons.
3. Select a component color (Red, Green, Blue, Cyan, Yellow or Magenta).
ICC Adjust
Color Type
NTSC
R
G
B
C
Y
M
For each component color, you can adjust the following:
Intensity
0
0
0
•
•
Intensity: This slidebar adjusts the intensity -- also known as luminance -- of a given color.
Saturation
Hue
Saturation: This slidebar adjusts the color saturation level -- the amount of that color in a
video image. Lower settings produce less saturated colors; a setting of “-64” removes that
color from the image entirely. If the saturation is too high, that color will be overpowering
and unrealistic.
Store Setting
•
Hue: This slidebar adjusts the red/green color hue for true color reproduction of video
signals. For best results, adjust the hue while displaying an external color bar test pattern
When you have finished customizing the color space, select Store Setting and press ENTER.
ISF Enable: Use ISF Enable to control the display of the ISF logo on the Vision 10/12 splash
&$/,%5$7('ꢀ)25ꢁ
Figure 4-11. ISF-Enabled Vision 10/12 Splash Screen
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Splash Screen Timer: Press the right- or left-arrow buttons to set the Splash Screen Timer.
This timer controls how long the startup (ISF and Vidikron logo) image stays on-screen after
you turn on the projector. Select from 15 to 60 seconds, in 5-second increments.
Noise Reduction: To apply Digital Noise Reduction (DNR) to the input signal, select Noise
Reduction from the ISF Calibration menu. Noise reduction is useful for clearing up noisy RGB
images such as those from a PC. Adjust as desired using the left- or right-arrow buttons,
keeping in mind that reducing noise (which reduces high frequencies) may also “soften” the
image.
48
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5Maintenance and Troubleshooting
•
•
•
•
Unplug the power cord before cleaning the
projector.
5.1
Cleaning the Projector
Avoid using benzene or thinner, as these can
damage the finish on the projector exterior.
Do not use volatile agents, such as insecticides,
on the projector.
Do not leave rubber or plastic objects in contact
with the projector for long periods as they may
damage the finish of the projector.
•
•
Wipe off dirt gently with a soft flannel cloth.
For hard-to-remove dirt, soak a cloth in a
neutral detergent diluted with water, wring the
cloth well and then wipe the projector.
•
Strong cleaning detergents may discolor, warp
or damage the coating on the projector. Make
sure to test on a small, inconspicuous area on
the projector before using.
•
•
Use a commercially available blower or lens
cleaning paper (for glasses and camera lenses)
for cleaning the lens. Do not use any liquid
cleaning agents, as they may wear the coating
film on the surface of the lens.
5.2
Cleaning the Lens
The surface of the lens is easily damaged. Do
not scrape or hit the lens.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
49
Download from Www.Somanuals.com. All Manuals Search And Download.
This Vision 10/12 is equipped with intake and
exhaust vents to allow the flow of cool air
through the projector and maintain the
proper operating temperature.
Side and front view
5.3
Cleaning the Intake and
Exhaust Vents
You should periodically clean the vents by
vacuuming them with a vacuum cleaner.
Vidikron recommends doing this after every
100 hours of use, or more often if the
projector is used in a dirty or smoky location.
Ventilation holes
To clean the intake and exhaust vents:
1. Press OFF on the remote control to turn
off the power. Wait until the cooling fan
stops.
Power OFF
button
2. Unplug the power cord.
3. Remove dust by placing the cleaner hose
on the intake and exhaust vents.
50
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The projector lamp has a life of 2,000 hours. Maintain proper ventilation to keep the lamp
operating throughout its lifetime. Do not subject the projector to unnecessary vibration.
5.4
Lamp Maintenance
•
Lamp replacement is recommended after approximately 2,000 cumulative hours of use or
when you notice a significant deterioration in the picture and color quality. To find out
Image Options menu.
•
The actual lamp service life may be less than 2,000 hours depending on the environment
in which the projector is used.
•
For lamp replacement, please contact your nearest Vidikron authorized service
center or Vidikron dealer. Do not attempt to replace the lamp yourself!
5.5
This projector uses a pressurized mercury lamp. A loud sound may indicate
lamp failure. Lamp failure is caused by excessive shock, improper cooling,
Lamp Cautions
Caution
surface scratches or deterioration of the lamp due to usage. The period of
time up to failure largely varies depending on the individual lamp and the
condition and the frequency of use. It is important to note that failure can
often result in the bulb cracking.
When the lamp replacement indicator and on-screen display icon are
illuminated or are flashing, replace the lamp with a new one immediately,
even if the lamp appears to be operating normally.
If the lamp breaks, glass particles may spread inside the lamp cage or gas
contained in the lamp may be vented into the room from the exhaust vent.
As the gas in this lamp contains mercury, ventilate the room well if the
lamp breaks and avoid all exposure to the released gas. In case of exposure
to the gas, consult a doctor as soon as possible.
If the lamp breaks, there is also a possibility that glass particles may spread
inside the projector. If this happens, contact your nearest Authorized
Dealer to remove the damaged lamp and ensure safe operation.
Do not remove the lamp unit immediately after turning off the projector.
Touching a hot lamp can cause burns or injury. Wait at least one hour after
the disconnecting the power cord to allow the surface of the lamp unit to
fully cool before removing.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
51
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Turn off the projector and wait for the cooling fan to stop.
5.6
Lamp Replacement
2. Unplug the power cord. Allow the projector to cool down for approximately one hour
prior to removing the lamp assembly for replacement.
3. Loosen the two captive
lamp cover screws and
remove the cover.
4. Loosen the four lamp
assembly mounting screws.
5. Grasp the lamp assembly
handle and pull gently,
removing the lamp module
from the projector housing.
As you do so, the lamp
cooling interlock switch on
the inside of the lamp cavity
(near the top) moves to the
OFF position.
6. Gently slide the new lamp assembly into the lamp cavity. Align the two power
connectors at the top of the lamp assembly with the two sockets at the top of the lamp
cavity. Press gently on both sides of the lamp assembly to snap it into place. As you do
so, the lamp cooling interlock switch returns to the ON position.
7. Tighten the lamp assembly mounting screws.
8. Replace the lamp cover and secure the captive lamp cover screws.
9. Plug in the projector and turn it on.
Calibration menu and press ENTER. The Vision 10/12 shows the number of hours the
projector lamp has been in service and asks you to confirm or cancel the reset. Press
ENTER again to confirm.
52
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 5-1 provides some general guidelines for troubleshooting problems you may
encounter with the Vision 10/12. If you encounter an issue not described here, please contact
your Vidikron dealer or Vidikron Technical Support.
5.7
Troubleshooting Tips
Table 5-1. Troubleshooting Chart
Symptom
Possible Cause(s)
Solution
The projector does not turn on
after initial installation.
•
•
The Vision 10/12 is not
plugged in or the AC outlet
is not active.
The remote control
batteries have run out.
•
•
Ensure that the Vision
10/12 is plugged in and
that the AC outlet is active.
Replace the batteries.
The projector is on, but there is
no video image on-screen.
•
•
Incorrect source selection.
Source component is not
turned on.
•
•
Select the correct source.
Turn on the source
component.
A projected image from a DVD
is split or otherwise scrambled.
•
DVD player is set to
progressive scan mode.
•
•
Turn off progressive scan
on the DVD player.
Connect the DVD player to
the HD/RGB 1 or HD/RGB 2
input.
Image is too bright and/or
lacks definition in the bright
areas of the image.
•
•
•
Contrast is set too high.
Brightness is set too high.
•
•
•
Lower the contrast setting.
Image appears “washed out”
and/or dark areas appear too
bright.
Lower the brightness
setting.
Colors in the image are
swapped; for example, reds
appear blue or vice versa.
The Red/Pr, Green/Y or
Blue/Pb outputs from the
source are connected to the
wrong inputs on the Vision
10/12.
Ensure that the source
outputs are connected to
the correct Vision 10/12
input.
RGB-HD images appear
“noisy.”
•
Clock and Phase settings
need adjustment.
•
Manually adjust Clock and
Phase settings, or perform
an Auto-Tune (refer to
page 42).
The projector will not turn
back on after it was powered
down, or the image disappears
during operation.
•
•
The projector will not turn
on for two minutes after
power-down, to protect the
lamp.
The lamp has failed or was
improperly installed.
•
•
Wait until the cooling fan
stops.
Replace or re-install the
lamp.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
54
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6Serial Communications
To interface the Vision 10/12 with a home theater automation/control system or a PC
running terminal emulation software, connect it to your control system or PC as shown in
6.1
RS-232 Connection and
Port Configuration
Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 stop bit
and no flow control. Set the baud rate to 9600, to match that of the Vision 10/12 RS-232 port.
Table 6-1 lists the RS-232 command set. All commands are in ASCII format and must be in
UPPERCASE.
6.2
Serial Command Syntax
When you send a valid command, the Vision 10/12 executes it and acknowledges it with the
first three characters of the command followed by “OK;” for example, RRAOK. When you send
an invalid command, the Vision 10/12 ignores it and returns the first three characters of the
command followed by “NG;” for example, RRXNG.
Table 6-1. Serial Commands
Command
Description
Reply
RRAOK
RRA00
Saves current settings to the CUSTOM 1 memory
(Note 1)
RRA01
RRA02
Saves current settings to the ISF Day memory (Note 1)
RRAOK
RRAOK
Saves current settings to the ISF Night memory
(Note 1)
RRB00
RRB01
RRB02
RRC00
RRC01
RRC02
RRC03
RRC04
RRC05
RRD00
RRD01
Recalls the Custom 1 memory settings
Recalls the ISF Day memory settings
Recalls the ISF Night settings
RRBOK
RRBOK
RRBOK
RRCOK
RRCOK
RRCOK
RRCOK
RRCOK
RRCOK
RRDOK
RRDOK
Selects the S-VIDEO input
Selects the COMPOSITE VIDEO input
Selects the COMPONENT 1 input
Selects the COMPONENT 2 input
Selects the HDMI input
Selects the RGB input
Selects the ANAMORPHIC (16:9) aspect ratio
Selects the STANDARD (4:3) aspect ratio
Notes:
1. All image quality settings must be made with the remote control. After the image adjustments are
complete, you can use these commands to store the settings in the selected memory.
2. The power on command (PON) will not provide an OK reply; it will instead reply with a random character.
For your automation system, simply ensure that you receive a character after the PON command. If you
do not get any reply after PON, send PON again.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 6-1. Serial Commands (continued)
Command
RRD02
RRD03
RRD04
RRD05
RRE00
Description
Reply
RRDOK
Selects the LETTERBOX aspect ratio
Selects the INTELLIWIDE aspect ratio
Selects the CINEMA (2.35:1) aspect ratio
Selects the CINEMA FILL aspect ratio
Turns the projector OFF
RRDOK
RRDOK
RRDOK
RREOK
PON
Turns the projector ON
Random (Note 2)
Notes:
1. All image quality settings must be made with the remote control. After the image adjustments are
complete, you can use these commands to store the settings in the selected memory.
2. The power on command (PON) will not provide an OK reply; it will instead reply with a random character.
For your automation system, simply ensure that you receive a character after the PON command. If you
do not get any reply after PON, send PON again.
56
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
7Specifications
Table 7-1 lists the Vision 10/12 specifications.
7.1
Vision 10/12 Specifications
Table 7-1. Vision 10/12 Specifications
Projector Type:
Digital Light Processing (DLP), single-chip DMD
Native Resolution:
Vision Model 10: 1024 x 576 (16:9)
Vision Model 12: 1280 x 720 (16:9)
Aspect Ratios:
4:3, Letterbox, 16:9 Anamorphic, IntelliWide, Cinema,
Cinema Fill
Video Standards:
Scan Frequency:
NTSC, PAL, SECAM
Horizontal: 15 to 80 kHz
Vertical: 43 to 100 Hz
Picture Size (16:9 Screen):
Recommended Width: 72 to 96 in.
Maximum Width: 150 in.
Throw Distance
Vision Model 10:
(Factor x Screen Width):
Minimum: Screen Width x 1.40
Maximum: Screen Width x 1.60
Vision Model 12:
Minimum: Screen Width x 1.42
Maximum: Screen Width x 1.65
Horizontal Offset:
8% of screen width left or right
Vertical Offset – Vision Model 10: Ceiling-mounted --
60% of screen height below;
40% of screen height above
Floor-mounted --
40% of screen height below;
60% of screen height above
Vertical Offset – Vision Model 12: Ceiling-mounted --
63% of screen height below;
46% of screen height above
Floor-mounted --
46% of screen height below;
63% of screen height above
Lamp:
250 Watts
Estimated Lamp Life:
Source Inputs:
2000 hours
(1) Composite; (1) S-Video; (2) RCA Component (YPbPr); (1)
VGA; (1) HDMI 1.2 with HDCP
Control Options:
-
-
Discrete infrared remote
Serial commands via RS-232
RS-232 Communication
Parameters:
9600 bps, no parity, 8 data bits, 1 stop bit, no flow control
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 7-1. Vision 10/12 Specifications (continued)
+12V Output:
0.25 Amps, active when the projector is turned on
Power Requirements:
Operating Environment:
100 to 240 VAC (auto-sensing), 50/60 Hz, 370 Watts
41°F to 95°F (5°C to 35°C), 0% to 90% humidity
(non-condensing)
Dimensions:
Weight (including lens):
Brightness and Contrast:
27.5 lbs. (12.47 kg)
Cinema Standards Measurement System (CSMS)
Specifications
-
Brightness: 15.9 foot-Lamberts (fL) (Vision Model 10);
16.1 foot-Lamberts (fL) (Vision Model 12)
Contrast Ratio: 219:1 (Vision Model 10);
224:1 (Vision Model 12)
-
These measurements are taken from the projector in a controlled,
home theater environment. All measurements are made to
ANSI/NAPM IT7.228-1997 specifications using the Photo Research
PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter,
Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The
projector is calibrated to a color temperature of 6,500K and has a
minimum of 150 hours of usage.
The foot-Lambert (fL) is the unit of measurement used in commercial
movie theaters to express image brightness at the screen surface.
The Society of Motion Picture and Television Engineers (SMPTE)
specifies 16 fL as the target image brightness for film-based
projectors using an open gate (without film in the projector). More
importantly, today SMPTE specifies 12 fL as the target image
brightness in Digital Cinema theaters. The foot-Lambert
measurement is dependent on screen size, screen gain and projector
light output.
Home Theater Calibration Specifications
-
Light Output: 410 ANSI Lumens (Vision Model 10);
417 ANSI Lumens (Vision Model 12)
Contrast Ratio: 219:1 (Vision Model 10);
224:1 (Vision Model 12)
-
These specifications are obtained by calibrating the projector as
described above for CSMS measurements.
Industry-Standard Specifications
-
Light Output: 780 ANSI Lumens (Vision Model 10);
820 ANSI Lumens (Vision Model 12)
Contrast Ratio: 2400:1 (Vision Model 10);
2550:1 (Vision Model 12)
-
These are typical projector brightness and contrast specifications
found in most companies’ sales literature. Vidikron includes these
measurements in its literature to allow for direct comparison with
other manufacturers’ projectors. These measurements are typically
taken at 9,000K to 13,000K to get expected performance data when
the projector is used in professional, commercial and industrial
displays.
Regulatory Approvals:
Limited Warranty:
Complies with FCC, CE C-Tick
Projector: Two (2) years parts and labor from the date of
delivery to the end user.
Lamp: 1000 hours or six (6) months, whichever comes first.
Specifications are subject to change without notice.
58
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 7-1 shows the Vision 10/12 dimensions.
7.2
Vision 10/12 Dimensions
Rear View
15.66in
398.0mm
Side View
Side View
9.12in
6.54in
166.3mm
231.7mm
Front View
Bottom View
3.42in
87mm
3.42in
87mm
Figure 7-1. Vision 10/12 Dimensions
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
59
Download from Www.Somanuals.com. All Manuals Search And Download.
The Vision 10/12 can display video signals from a variety of computer sources via its RGB-HD
and HDMI inputs. It is compatible with the three most common sync modes -- sync-on-green,
composite sync and RGB with separate sync -- as well as XGA display adapters that use
advanced intelligent compression.
7.3
Computer Signal
Compatibility
Table 7-2 lists the signal types that are compatible with the Vision 10/12, and indicates which
of those are VESA standards.
Table 7-2. Computer Signal Compatibility Chart
Horizontal
Frequency Frequency
Vertical
PC/MAC/
WS
VESA
Standard Support
HDMI
Resolution
Display
(kHz)
27.0
31.5
37.9
27.0
31.5
27.0
31.5
37.9
27.0
31.5
37.9
26.2
31.5
36.8
37.9
37.5
43.3
47.9
53.0
(Hz)
60
70
85
60
70
60
70
85
60
70
85
50
60
70
72
75
85
90
100
PC
VGA
640 x 350
Upscale
√
720 x 350
640 x 400
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
720 x 400
640 x 480
√
√
√
Notes:
1. This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD)
mode. Should this occur, switch the notebook computer to “CRT only” mode. If you are unsure how to do
this, refer to your notebook computer’s user manual.
2. When this projector receives 640 × 350 VESA format VGA signals, “640 × 400” appears on the screen.
3. Interlaced video signals received through the RGB input may not display correctly. If this occurs, use the
Component 1, Component 2, S-video or Composite video input instead.
60
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 7-2. Computer Signal Compatibility Chart (continued)
Horizontal
Frequency Frequency
Vertical
PC/MAC/
WS
VESA
Standard Support
HDMI
Resolution
Display
(kHz)
31.4
35.1
37.9
44.5
48.1
46.9
53.7
56.8
64.0
35.5
40.3
48.4
56.5
60.0
68.7
73.5
77.2
80.6
34.9
49.6
48.4
(Hz)
50
56
60
70
72
75
85
90
100
43
50
60
70
75
85
90
96
100
67
75
60
PC
SVGA
800 x 600
√
Upscale
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
PC
PC
SVGA
XGA
800 x 600
Upscale
True
1024 x 768
√
√
√
√
MAC 13”
VGA
640 x 480
832 x 624
1024 x 768
Upscale
True
MAC 16” SVGA
MAC 19”
XGA
√
Notes:
1. This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD)
mode. Should this occur, switch the notebook computer to “CRT only” mode. If you are unsure how to do
this, refer to your notebook computer’s user manual.
2. When this projector receives 640 × 350 VESA format VGA signals, “640 × 400” appears on the screen.
3. Interlaced video signals received through the RGB input may not display correctly. If this occurs, use the
Component 1, Component 2, S-video or Composite video input instead.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 7-3 lists numerous common video signal formats and indicates which input(s) on the
Vision 10/12 can accept a given format.
7.4
Video Signal Compatibility
Table 7-3. Video Signal Compatibility Chart
Compatible Inputs (Note 1)
H-Freq V-Freq
Resolution
Comp. Comp.
S-
Com-
(kHz)
(Hz)
VGA HDMI
1
2
Video posite
SD
Video
NTSC 640 x 480i 15.73
59.94/
60
√
√
√
√
PAL 768 x 576i 15.63
SECAM
50
√
√
√
√
√
√
√
√
NTSC-
4.43
(adjustment required)
PAL-M
PAL-N
NTSC-J
PAL-60
NTSC-
50
(not supported)
EDTV
480p 720 x 480p 31.5
59.94/
60
√
√
√
√
576p 720 x 576p 31.3
50
50
√
√
√
√
√
√
√
√
HDTV 1080i/
50
1920 x
1080i
28.1
33.8
37.5
45.0
1080i/
60
59.94/
60
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
720p/
50
1280 x
720p
50
720p/
60
59.94/
60
HTPC 720p/
1280 x
720p
48
75
48
(Note
2)
48
720p/
75
576p/
48
1024 x
576p
Notes:
1. The Component 1 and Component 2 inputs accept both analog (YPbPr) and digital (YCbCr) signals.
2. HTPC = Home Theater PC
62
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
RUMA-011175
rev. 08-14-06 v2.0
Vidikron
2900 Faber Street
Union City, CA 94587
510-324-5900
Fax 510-324-5905
1-888-4-VIDIKRON
SERIAL NUMBER
Download from Www.Somanuals.com. All Manuals Search And Download.
|