INSTRUCTION BOOK
Dishwasher
BDW 60
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
It is most important that this instruction book should be retained with the appliance for future reference. Should the
appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that
the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the
relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the
appliance.
G Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
G When finishing loading or unloading close the door, as an
open door can be a hazard.
G Do not sit or stand on the open door.
Installation
G This appliance is heavy. Care should be taken when moving
it.
G It is dangerous to alter the specifications or attempt to
modify this product in any way.
G Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
G Any electrical work required to install this appliance should
G Isolate the appliance from the power supply and turn off the
water supply after use.
G Care should be taken when cleaning the bottom door seal
and hinge area as any exposed metal edges may cut if care
is not taken.
be carried out by a qualified electrician or competent
person.
G This product should be serviced by an authorised Service
G Any plumbing work required to install this appliance should
engineer, and only genuine spare parts should be used.
be carried out by a qualified plumber or competent person.
G Under no circumstances should you attempt to repair the
machine yourself. Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning.
Contact your local Service Force Centre. Always insist on
genuine spare parts.
Child Safety
G This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the controls
or play with the product.
G Keep all packaging well away from children.
Conservation
In the interest of the environment:
G Keep all detergents in a safe place out of children's reach.
G Materials marked with the symbol
are recyclable.
During Use
G Items that are contaminated by petrol, paint, steel or iron
debris, corrosive, acidic or alkaline chemicals must not be
washed in this dishwasher.
G Under no circumstances should you open the door whilst
the appliance is in operation. Always turn off the appliance
before opening the door.
G Only use detergent specifically designed for use in
dishwashers.
G Check with your local Council or Environmental Health
Office to see if there are facilities in your area for re-cycling
this appliance.
G When the appliance is to be scrapped, cut off the power
supply cable and make the door closing device unusable to
prevent young children from being trapped inside.
G Help to keep your country tidy - use authorised disposal
sites for your old appliance.
G Long bladed knives stored in an upright position are a
potential hazard.
Description of the appliance
1. Levelling spacers
2. Upper basket stop
3. Salt container
4. Large filter
13
1
2
12
5. Detergent dispenser
6. Control panel
7. Rating plate
11
10
9
3
4
8. Rinse aid dispenser
9. Central filter
10. Lower spray arm
11. Upper spray arm
12. Upper basket
13. Worktop
5
8
7
6
IN109
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The control panel
1. MAINS ON indicator light
2. MAINS ON push button
3. Door handle
5. Indicator lights
Phase indicator lights
WASH
illuminates when the washing phase is running
DRYING
illuminates when the drying phase is running
END
illuminates when the washing programme has ended
4. Programme selection push buttons
Salt indicator light
SALT
illuminates when the salt has run out and the salt
container requires refilling.
Before use
Water hardness
Before using your dishwasher for the
first time:
PPM
(Parts per
Million)
Use of
salt
French
degrees
(°TH)
Clarke
degrees
Level
1. Ensure that the electrical and water connections comply
with the installation instructions
< 80
< 6
< 8
NO
1
2
3
4
5
2. Remove all packaging from inside the appliance
81 - 300
301 - 500
501 - 700
701 - 900
6 - 21
8 - 30
YES
YES
YES
YES
3. Set the water softener
22 - 35
36 - 49
50 - 63
31 - 50
51 - 70
71 - 90
4. Pour 1 litre of water inside the salt container and then fill
with salt
5. Fill the rinse aid dispenser
6. Run a Rinse and Hold programme.
If your water is level 1 it is already soft and therefore there
is no need to use salt.
With the setting of the water softener at level 1 the salt
indicator light on the control panel will always remain off.
Use salt from level 2 upwards.
Setting the water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, Clarke
degrees, French degrees and PPM (parts per Million).
From level 2 upwards, if salt refilling is necessary, the salt
indicator light will illuminate only in setting mode and at
the end of the washing programme.
During the run of the programme it will remain off.
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
The dishwasher is factory set at level 3.
If this level is not suitable for your area the softener should be
adjusted.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
To select a different level ensure that the
dishwasher is off and then proceed as
follows:
Filling with salt
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed for use in
a dishwasher, especially table salt, will damage the water
softener.
1. Press RINSE & HOLD and INTENSIVE programme push
buttons simultaneously.
Only fill with salt just before starting one of the washing
programmes.
This will prevent any grains of salt or salty water, which
may have been spilled, remaining on the bottom of the
machine for any period of time, which may cause
corrosion.
2. While keeping the programme push buttons RINSE &
HOLD and INTENSIVE pressed switch on the dishwasher
by pressing the MAINS ON push button.
The MAINS ON indicator light comes on.
At the same time, the indicator lights of the RINSE & HOLD
and INTENSIVE push buttons start flashing.
To fill:
3. Press the RINSE & HOLD push button, the indicator light of
1. To fill with salt, unscrew the cap of the salt
container.
2. Pour 1 litre of water inside the container
(this is necessary only
before filling with salt for
the first time).
SALET
SAL
SALZ
3. Using the funnel provided,
SEL
pour in the salt until the
container is full.
SO527
Do not worry if water over
flows from the unit when
filling with salt, this is quite
the INTENSIVE push button turns off, while the indicator
light of the RINSE & HOLD push button remains fixed for
about 5 seconds, after this it starts flashing indicating the
current level of the water softener.
normal.
SR06
4. Replace the cap making
The current level is indicated by the number of flashes
sure that there is no trace of salt
on the screw thread or on the gasket.
5. Screw on the cap tightly.
The salt container will require topping up periodically.
You are reminded of this by the salt indicator light on the
control panel which comes on when the salt has finished.
SO528
The salt indicator light on the control panel can remain
illuminated for 2-6 hours after the salt has been
replenished, assuming the dishwasher remains switched
on. If you are using salts that take longer to dissolve then
this can take longer. The function of the machine is not
affected.
made by the RINSE & HOLD indicator light, that alternates
5 seconds off with a number of flashes, this for about 60
seconds.
Example:
1 flash
= level 1
2 flashes = level 2
3 flashes = level 3
4 flashes = level 4
5 flashes = level 5
4. To change the level, press the RINSE & HOLD
programme push button. Each time the push button is
pressed the level changes.
Example:
if the current level is 3, by pressing the RINSE & HOLD
programme push button once, level 4 is selected.
if the current level is 5, by pressing the RINSE & HOLD
programme push button once, level 1 is selected.
The RINSE & HOLD indicator light remains off for about 5
seconds after which it starts flashing indicating the new
level selected.
5. To memorise the new level, switch off the dishwasher by
pressing the MAINS ON push button.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Use of detergent
Rinse aid is automatically added during the last rinse, ensuring
thorough rinsing, and spot and streak free drying. The
dispenser, which is positioned inside the door, holds about 110
ml of rinse aid, which is sufficient for 16 - 40 dishwashing
programmes, depending upon the dosage setting.
Only use detergents specifically designed for use in
dishwashers.
We recommend the use of Finish detergents which are
available in the following options:
Finish Double Action Tablets. Each tablet has the exact
amount of detergent required, simply place in the dispenser.
Filling with rinse aid
Finish Powder recommended for every day use.
1. Open the container by turning the lid (A) anticlockwise.
Finish Liquid Gel ideal for every day use. As the gel is extra
gentle it is recommended for fine bone china.
2. Add the rinse aid until the container is completely full.
The indicator (B) will be completely dark.
If using powder detergents proceed as follows:
3. Top up the rinse aid when the indicator (B) becomes clear.
1. Open the dispenser lid by pulling the catch (D).
2. Add the detergent according to the instructions given in the
Washing programmes chart.
As all detergents are not the same, you should also consult
the instructions on the packet.
3. Always close the lid.
4. If the programme has a prewash add the required detergent
over the lid of the dispenser according to the instructions
given in the Washing programmes chart.
BR01
BR03
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid compartment. Clean
up any rinse aid spilt during filling with an absorbent cloth to
avoid excess foaming during the next wash.
Adjusting the dose
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (C)
(position 1 minimum dosage, position 6 maximum dosage).
DE17
DE02
If using detergent in tablets proceed as follows:
Increase the dose if there are drops of water or lime spots on
the dishes after washing.
1. For all programmes; place 1 tablet inside the detergent
dispenser.
Reduce it if there are sticky whitish streaks on the dishes.
2. Always close the lid.
3. For all programmes with prewash; place a portion of a
further tablet on the lid of the detergent dispenser.
If detergents in tablet form are used with the QUICK WASH
programme, it is advisable to put the tablet directly in the
dishwasher and not in the dispenser or in special tablet
containers. This ONLY applies to this programme.
Insufficient quantities of detergent will produce poor
washing results, whereas an excessive amount of
detergent will not improve washing results and is also
wasteful.
BR02
Using no more than the correct amount also contributes
to reducing pollution.
Compact detergents with enzymes
In these compact powders the environmentally unfriendly
components have been replaced by natural enzymes and
other more biodegradable substances.
The enzymes deploy their full dirt dissolving power at a
temperature as low as 50°C.
By choosing the BIO programme you can therefore achieve
the same cleaning results that would otherwise be achievable
only with 65°C programmes and conventional detergents.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your appliance
Loading your appliance
The upper basket
Before placing dishes in the machine, remove any scraps of
food, to avoid clogging the filters and consequently reducing
the performance.
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 25 cm in diameter), salad
bowls, cups and glasses.
Do not load very small items which can fall through the
baskets.
Open the door and slide out the baskets to load the dishes.
Arrange items on and
underneath the cup racks so
that water can reach all
surfaces.
Glasses with long stems can
be placed upside down in the
cup racks.
Light items (plastic bowls
etc.) must be loaded in the
The lower basket
The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the upper spray arm can turn
freely.
US47
upper basket and arranged
so they do not move.
In case that plates are loaded in the upper
basket:
load them starting from the
rear positions of the
basket; tilting them slightly
forwards and avoiding the
front positions near the
door.
UI49
UI19
US71
The cutlery basket
Before closing the door, ensure that the spray arms can
rotate freely.
Long bladed knives stored in an upright position are a
potential hazard.
These items should only be places in the removable knife
basket.
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in
diameter) you can load them in the lower basket after moving
the upper basket to the higher position.
Take care when loading or unloading sharp items such as
knives.
Removable knife basket
Long and/or sharp items of cutlery such as carving knives
must be placed horizontally in the removable knife basket
provided, to be positioned at the rear of the upper basket.
To move to the higher position proceed as
follows:
1. Move the front runner
stops (A) of the upper
basket outwards and slide
the basket out.
2. Refit the basket in the
higher position and
replace the stops (A) in
their original position.
RC01
UI53
Cutlery should be placed in the removable cutlery basket with
the handles facing downwards. If the handles protrude from
the bottom of the basket, obstructing the lower spray arm, load
the cutlery with the handles facing upwards.
When the top basket is in
the higher position it will only take plates up to 20 cm in
diameter and you will not be able to use the cup racks.
Mix spoons with other cutlery to prevent them from sticking
together.
After loading your machine always close the door, as an
open door can be a hazard.
For best results we
recommend you to use the
cutlery grid provided (if the
size and dimensions of the
cutlery allow it).
UI71
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your appliance
To save energy
Items not suitable for dishwashers
Place dishes in the machine immediately after every meal and
wait until the dishwasher is full before washing.
The following items should not be washed in the dishwasher
(unless they are sold as dishwasher proof):
Do not prewash dishes under running water.
- Cutlery with wooden or horn handles or glued parts
- bronze cutlery
- saucepans with wooden handles
- aluminium ware
Select the QUICK WASH programme when dishes are not
very soiled, following the instructions given in the "Washing
programmes" chart.
- crystal ware
- leaded glass
For best washing results
Before loading, remove all scraps of food and soak very
heavily soiled pots and pans.
- plastic items
- antique or fine decorated china
Certain types of decoration can discolour when washed in a
dishwasher.
Arrange saucepans, cups and glasses etc. upside-down.
Tilt items with convex or concave surfaces so that the water
drains off easily.
Crystal-ware and plastic objects, if not guaranteed dishwasher
proof should be washed by hand.
Avoid contact between the dishes as far as possible.
Certain types of glass can also become opaque after being
washed several times in a dishwasher.
A chemical reaction can occur between silver cutlery and
stainless steel cutlery. As a precaution, do not wash together.
Iron and cast iron objects can rust and stain other items.
Aluminium tends to go black, copper, pewter and brass tend to
stain.
If in doubt check with manufacturer of the item.
When buying new dishes, ensure that they are dishwasher
proof.
For best results we recommend the use of Finish detergents, rinse aid and salt.
P OURING
PACK
EW
E
N
N
IO
T
C
L
B
A
U
O
D
L
I
Q
U
I
D
G
E
L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT
DE15
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Type of load
Degree of soil
Required
Recommended
Cycle
quantity of detergent
push buttons
description
wash
prewash
Any.
MAINS ON
+
RINSE & HOLD
1 cold rinse (to avoid
food scraps from
sticking together
Partial load (to be
completed later in the
day).
RINSE & HOLD
/
/
Hot prewash
MAINS ON
+
INTENSIVE
Heavy soil.
Crockery, cutlery, pots
and pans
Main wash up to 65°C
2 warm rinses
1 hot rinse
65°
INTENSIVE
20 g
25 g
10 g
5 g
Active drying
Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse
Active drying
MAINS ON
+
POWER WASH
65°
Normal soil.
Crockery and cutlery
POWER WASH
Hot prewash
Main wash up to 50°C
2 cold rinses
1 hot rinse
MAINS ON
+
BIO WASH
50°
BIO WASH
Normal soil.
Crockery and cutlery
*
15 g
30 g
15 g
Active drying
MAINS ON
+
QUICK WASH
Main wash up to 50°C
1 cold rinse
1 hot rinse
Light soil.
Crockery, cutlery and
party crockery
** 50°
/
QUICK WASH
Testing programme for EN 50242 (see "Hints for Test Centres).
*
This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of
energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional
detergents.
To compensate for the lower temperature, the duration of the programme has been prolonged.
This is a special programme for quick washing a full load of lightly soiled dishes, glasses and crockery (except pots) so that
you may re-use them promptly.
**
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating sequence
1. Check the filters
9. To cancel a programme in progress
Ensure they are clean and properly positioned (see
A programme in progress can be cancelled at any time.
"Maintenance and cleaning").
Press for about 3 seconds the push button of the running
programme until all indicator lights are off.
Only the MAINS ON indicator light will remain on once
the programme has been cancelled.
It is now possible to select a new washing programme.
2. Press the MAINS ON push button
The MAINS ON indicator light will come on.
10. At the end of the washing
programme
3. Check that there is rinse aid
and salt
The dishwasher will automatically stop and the phase
indicator light end of programme will come on.
The salt indicator light will illuminate if refilling is
necessary.
The indicator light of the programme just ended will
remain on.
The dishwasher has finished the programme only when
the end of programme (END) indicator light is illuminated.
If you do not wait for the end of the programme it will not
be possible to start a new programme if first you do not
cancel the previous.
4. Load the dishes
Remove any scraps of food.
Pull the lower basket out and arrange the saucepans,
plates and cutlery in it.
Pull the upper basket out and arrange the plates,
saucers, glasses and cups etc. in it.
Slide the baskets back into the machine.
(For instructions on how to cancel a programme see
point 9)
Switch off the dishwasher by pressing the MAINS ON
push button and open the door.
Wait a few minutes before removing the dishes; in this
way they will be cooler and drying will be improved.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
5. Ensure that the spray arms can
rotate freely
6. Measure out detergent
Add the required amount of detergent into the dispenser
according to the recommended quantity given in the
Washing programmes chart.
Important!
In general it is not advisable to open the door while the
machine is working; if the door is opened however, a
safety device ensures that the machine stops.
Care must be taken if the door is opened during the hot
phase or immediately after a programme has finished, as
steam may escape.
Close the detergent dispenser lid.
7. Close the dishwasher door
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
8. Setting and starting the programme
Press the push button corresponding to the required
programme: the indicator light corresponding to the
programme illuminates and the phase indicator lights for
that programme start flashing.
The start of the programme will occur after about 6
seconds from the last pressure of a programme push
button, in this time it is possible to change programme
simply pressing the push button of another programme.
Once the programme has started the phase indicator
lights will turn off except for the phase under way.
It is possible to interrupt the programme by:
G opening the door
G pressing the MAINS ON push button (in this case all
the indicator lights turn off)
Close the door again or press the MAINS ON push
button, the programme will start from the point in which it
was interrupted.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
Internal cleaning
Ensure that the seals around the door, the detergent and rinse
aid dispensers are cleaned regularly with a damp cloth.
We recommend the use of Finish Dishwasher Cleaner every 3
months or run a 65°C wash without dishes using detergent.
Regular use of Finish Dishwasher Cleaner cleans inaccessible
parts, eliminates unpleasant food odours and helps prevent the
build-up of limescale.
The dishwasher must not be used without filters.
Incorrect repositioning and fitting of the filters will
produce poor washing results.
Cleaning the filters is vital to ensure correct operation of
the machine.
External cleaning
Clean the external surfaces of the machine and control panel
with a damp soft cloth. If necessary use only neutral
detergents. Never use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc....).
Cleaning the central filter
(After each wash)
Scraps of food may accumulate in the drain filter (A) and
should be removed by rinsing the filter under running water.
Prolonged periods of non-operation
If you are not using the machine for any period of time you are
advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
To remove the drain filter
- simply pull it out by the handle.
Once cleaned, refit the filter by pushing it back to its original
position until it engages.
3. Leave the door ajar to prevent the formation of any
unpleasant smells.
4. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the temperature
is below 0°C. If this is unavoidable, empty the machine, close
the appliance door, disconnect the water inlet pipe and empty
it.
A
MA04
MA19
Cleaning the large filter
(Every week)
Moving the machine
If you have to move the machine (moving house etc....):
If necessary clean the large filter (B) on both sides under
running water, using a brush.
1. Unplug it.
2. Turn the water tap off.
To remove the large filter
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
1. Remove the spray arm by pulling it upwards on one side.
2. Turn the column (C) anticlockwise by 90° and then slide out
the filter.
3. Once cleaned refit it following the above instructions in
reverse order.
4. Ensure the filter is in its original position, the handle of the
drain filter should be pointing towards the front of the
appliance.
90°
B
C
MA20
MA05
MA21
MA18
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer.
The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems, such
as the dishwasher will not start or stops during operation, all push buttons are inoperative except for the ON-OFF push button, or
the indicator light of the programme underway and one or more of the phase indicator lights (washing, drying, end of programme)
are flashing.
Press the ON-OFF push button to switch off the dishwasher and carry out the following suggested corrective actions listed below.
Once the checks have been carried out switch on the dishwasher and start a washing programme, if the fault code reappears,
contact your local Service Force Centre.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will
be made, even if the appliance is in guarantee.
Symptom
Fault code
Solution
G
The machine will not start
The door has not been properly closed.
G
The plug is not properly inserted in the power socket.
G
There is a power failure.
G
The machine does not fill
with water
"WASH"
phase indicator light
is flashing
Ensure the water tap is open.
Ensure the mains water supply has not been cut off.
The inlet hose may be squashed or bent. Reposition the
G
G
hose.
G
The inlet hose may be blocked. Switch off the water supply
and clean the filter.
G
The dishwasher will not drain
"DRYING"
The drain hose may be squashed or bent. Reposition the
phase indicator light
is flashing
hose.
G
The sink may be blocked. Clear any blockages.
G
The drain hose extension is not correct. Follow the
instructions for connecting to the waste.
There is no vent in the end of the drain hose.
G
G
General
One or more phase
indicator lights are
flashing
Switch off the dishwasher. Switch it back on and start the
programme.
If the alarm reappears, call the local Service Force Centre.
G
The machine is noisy
Dishes are rattling against each other, refer to "Loading your
machine".
G
The spray arms are knocking against the dishes. Refer to
"Loading your machine".
G
The door is difficult to close
The dishwasher is not level, or not properly built-in.
G
Visible lime deposits or
white film on the dishes
Check that there is salt and that the salt cap is tight.
Check that the right level of the water softener is set.
G
G
The dishes are not quite dry
The rinse aid has run out or too little is being used.
G
The dishes are not clean
(poor wash)
The baskets are too full.
The dishes have not been arranged properly.
G
G
The spray arms do not rotate
G
The spray arms are clogged.
G
The filters are clogged.
G
The filters are not in the correct position.
G
Not enough detergent has been used or it is unsuitable.
G
The detergent is old or has gone hard.
G
The salt container cap is not properly closed.
G
The washing programme selected is too gentle.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
If after all these checks, the problem persists, contact your
local Service Force Centre, quoting the model and serial
number.
This information can be
found on the rating plate
located on the right hand
side of the dishwasher door
(see picture).
Prod.No. ........ Ser. No. .........
Mod. ........
RA01
Service and Spare Parts
In the event of your appliance requiring service, or if you wish
to purchase spare parts please contact your local Service
Force Centre by telephoning:
08705 929 929
Your telephone call will be automatically routed to the Service
Force centre covering your post code area.
For the address of your local Service Force Centre and further
information about Service Force, please visit the website at
Before calling out an engineer, please ensure you read the
details under the heading Something not working.
When you contact the Service Force Centre you will need to
give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number (found on the rating plate)
5. The purchase date
Please note that a valid purchase receipt or guarantee
documentation is required for in-guarantee service calls.
Customer Care
Department
For general enquiries concerning your Bendix appliance or for
further information on Bendix products please contact our
Customer Care Department by letter or telephone at the
address below.
Customer Care Department
Bendix
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 950950 ( )
*
calls to this number may be recorded for training purposes
*
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee Conditions
Standard guarantee conditions
European Guarantee
If you should move to another country within Europe then your
guarantee moves with you to your new home subject to the
following qualifications:
We, Bendix, undertake that if within 12 months of the date of
purchase this Bendix appliance or any part thereof is proved to
be defective by reason only of faulty workmanship or materials,
we will, at our option repair or replace the same FREE OF
CHARGE for labour, materials or carriage on condition that:
G The guarantee starts from the date you first purchased your
product.
G The appliance has been correctly installed and used only on
the electricity supply stated on the rating plate.
G The guarantee is for the same period and to the same extent
for labour and parts as exists in the new country of use for
this brand or range of products.
G The appliance has been used for normal domestic purposes
only, and in accordance with the manufacturer’s instructions.
G This guarantee relates to you and cannot be transferred to
another user.
G The appliance has not been serviced, maintained repaired,
taken apart or tampered with by any person not authorised
by us.
G Your new home is within the European Community (EC) or
European free Trade Area.
G All service work under this guarantee must be undertaken by
a Bendix Service Force Centre.
G The product is installed and used in accordance with our
instructions and is only used domestically, i.e. a normal
household.
G Any appliance or defective part replaced shall become the
Company’s property.
G The product is installed taking into account regulations in
your new country.
G This guarantee is in addition to your statutory and other legal
rights.
Before you move please contact your nearest Customer Care
centre, listed below, to give them details of your new home.
They will then ensure that the local service Organisation is
aware of your move and able to look after you and your
appliances.
Home visits are made between 8.30am and 5.30pm Monday
to Friday. Visits may be available outside these hours in which
case a premium will be charged.
France
Senlis
+33 (0) 3 44 62 20 13
+46 (0) 20 78 77 50
+49 (0) 800 234 7378
+44 (0)1753 219898
+39 (0) 800 117511
+353 (0) 14090753
Exclusions
Sweden
Stockholm
This guarantee does not cover:
Germany Nurnberg
UK
Slough
G Damage or calls resulting from transportation, improper use
or neglect, the replacement of any light bulbs or removable
parts of glass or plastic.
Italy
Pordenone
Dublin
Ireland
G Costs incurred for calls to put right an appliance which is
improperly installed or calls to appliances outside the United
Kingdom.
G Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
G Products of Bendix manufacture which are not marketed by
Bendix.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser.
Test standard
EN 50242
Reference programme:
Load:
50° BIO WASH
12 standard place settings
position 5
Rinse aid selector:
Detergent dosage :
15 g in the dispenser
15 g on the dispenser lid
Arrangement upper basket
Arrangement lower basket
Arrangement cutlery basket
Arrangement knife basket
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
The sink plug must not be in place when the machine is
draining as this could cause the water to siphon back into the
machine.
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or competent
person.
If you use a drain hose extension it must be no longer than 2
metres and its internal diameter must be no smaller than the
diameter of the hose provided.
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a
drain.
Water supply connections
This dishwasher must be plumbed into a cold water supply.
The water pressure must be within the limits given in the
technical specifications.
+ 2 m max
CS10
Your local Water Authority will advise you on the average
mains pressure in your area.
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than the
diameter of the hose provided.
The dishwasher features fill and drain hoses which can be
turned either to the left or the right to suit the installation.
The locknut must be correctly fitted to avoid water leaks.
Attention!
Do not use, for the connection, old hoses which have
been used in another appliance.
Our appliances are supplied with a security device to
protect against the return of dirty water back into the
machine.
If the spigot of your sink has a "no return valve"
incorporated this can prevent the correct draining of your
dishwasher.
Avoid bends or kinks in the hose which could prevent or slow
down the water supply.
If the machine is connected
to new pipes or pipes which
have not been used for a
long time, you should run the
water for a few minutes
We advise you therefore to remove it.
before connecting the inlet
hose. This will prevent
deposits of sand or rust
clogging the inlet hose filter.
CA17
Water outlet hose connection
The end of the drain hose can be connected in the following
ways:
1. To the sink outlet spigot, securing it if necessary with a clip.
2. Hooked over the edge of the sink using the special curved
plastic guide provided.
3. To a stand pipe provided with vent-hole, minimum internal
diameter 4 cm.
2
1
3
CS09
The waste connection must be at a height of between 30 cm
(minimum) and 100 cm (maximum) from the bottom of the
dishwasher.
The drain hose can face either to the right or left of the
dishwasher
Ensure the hose is not bent or squashed as this could prevent
or slow down the discharge of water.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
This appliance must be earthed.
Fitting under a counter
(kitchen worktop or sink)
The manufacturer declines any responsibility should this
safety measure not be observed.
By removing the machine’s worktop, you can install it under a
close fitting sink unit or a pre-existing top, providing the
dimensions of the recess correspond to those shown in the
picture.
If the plug that is fitted to your appliance is not suitable for the
socket, it must be cut off and the appropriate plug fitted.
Important
Proceed as follows:
The wires on the mains lead are coloured in accordance with
the following code:
-Remove the machine’s
worktop by unscrewing the
two rear retaining screws,
pull from the front and slide
out the rear slots, lifting the
Green and Yellow - Earth
Blue
- Neutral
- Live
Brown
600
worktop.
If you fit your own plug, the colours of the wires in the mains
lead of your appliance may not correspond with the markings
identifying the terminals in your plug.
IN05
Proceed as follows:
Insert the machine after adjusting height and levelling with the
adjustable feet. When inserting the machine, ensure that the
water inlet and drain hoses are not kinked or squashed.
1. Connect the Green and Yellow (earth) wire to the terminal
in the plug which is marked with the letter "E" or the earth
symbol
or coloured green and yellow.
2. Connect the Blue (neutral) wire to the terminal in the plug
which is marked with the letter "N" or coloured black.
3. Connect the Brown (live) wire to the terminal in the plug
which is marked with the letter "L" or coloured red.
Levelling
Good levelling is essential for correct closure and sealing of
the door.
When the appliance is correctly levelled, the door will not catch
on the levelling spacers on either side of the cabinet.
E
L
N
CE04
IN07
IN06
The plug moulded onto the lead incorporates a 13amp BSI362
fuse. Only ASTA or BSI fuses should be used.
If the door does not close correctly, loosen or tighten the
adjustable feet until the machine is perfectly level.
The plug must not be used if the fuse cover/carrier is lost. The
cover/carrier is indicated by the coloured insert at the base of
the plug.
A replacement cover/carrier must be obtained from your local
Service Force Centre.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Bendix, 55-77 High Street, Slough, Berkshire, SL1 1DZ
Customer care telephone number...
08705 950 950
From the Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,
cleaning and outdoor use. More than 55 million Electrolux Group products (such as
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year
to a value of approx. 14 billion USD in more than 150 countries around the world.
152973 61/0
0 06/02
© Electrolux plc 2002
UK
Subject to change without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
|