OWNER’S
MANUAL
As an ENERGY STAR®
Partner, our company has
determined that this product meets
the ENERGY STAR® guidelines for
energy efficiency. ENERGY STAR®
is a U.S. registered mark.
VIDEO CASSETTE
RECORDER
SL220D
If you need additional
operating assistance after
reading this owner's
manual or to order
replacement accessories,
please call
TOLL FREE : 1-800-242-
7158
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING:
The lightning flash with arrowhead symbol, within
CAUTION
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of suffi-
cient magnitude to constitute a risk of electric
shock to persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instruc-
tions in the literature accompanying the product.
The caution marking is located on the rear of the cabinet.
IMPORTANT SAFEGUARDS
1. Read Instructions- All the safety and operating instructions should be
read before the appliance is operated.
FIGURE A
ANTENNA
LEAD
WIRE
2. Retain Instructions- The safety and operating instructions should be
retained for future reference.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
3. Heed Warnings- All warnings on the appliance and in the operating
instructions should be adhered to.
GROUND
CLAMP
4. Follow Instructions- All operating and use instructions should be followed.
ANTENNA
5. Cleaning- Unplug this video product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and, that
for some specific reason, such as the possibility of the loss of an authoriza-
tion code for a CATV converter, is not intended to be unplugged by the
user for cleaning or any other purpose, may exclude the reference to
unplugging the appliance in the cleaning description otherwise required in
item 5.
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
6. Attachments- Do not use attachments not recommended by the video
14. Lightning- For added protection for this video product during a lightning
storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the video product due to lightning and power-
line surges.
product manufacturer as they may cause hazards.
7.Water and Moisture- Do not use this video product near water, for exam-
ple, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet base-
ment, or near a swimming pool, and the like.
8. Accessories- Do not place this video product on an unstable cart, stand,
tripod, bracket, or table.The video product may fall, causing serious injury
to a child or adult, and serious damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the video product. Any mounting
of the appliance should follow the manufacturer's instructions
and should use a mounting accessory recommended by the
manufacturer. An appliance and cart combination should be
moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to
overturn.
9.Ventilation- Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the video product and to protect it from
overheating, and these openings must not be blocked or covered.The
openings should never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.This video product should not be placed
in a built-in installation such as a bookcase or rack unless proper ventila-
tion is provided or the manufacturer's instructions have been adhered to .
15. Power Lines- An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
16. Overloading- Do not overload wall outlets and extension cords as this can
result in a risk of fire or electric shock.
17. Object and Liquid Entry- Never push objects of any kind into this video
product through any openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock. Never
spill liquid of any kind on the video product.
18. Servicing- Do not attempt to service this video product yourself as open-
ing or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service- Unplug this video product from the wall out-
let and refer servicing to qualified service personnel under the following
conditions:
10. Power Sources- This video product should be operated only from the
type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance dealer or
local power company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
11. Grounding or Polarization- This video product is equipped with a polar-
ized alternating-current line plug (a plug having one blade wider than the
other).This plug will fit into the power outlet only one way.This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the video product to its normal operation.
e. If the video product has been dropped or damaged in any way.
f. When the video product exhibits a distinct change in performance-this indi-
cates a need for service.
20. Replacement Parts- When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufac-
turer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
12. Power Cord Protection- Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
21. Safety Check- Upon completion of any service or repairs to this video
product, ask the service technician to perform safety checks to determine
that the video product is in proper operating condition.
22. Heat- This video product should be situated away from heat sources such
as radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
13. Outdoor Antenna Grounding- If an outside antenna or cable system is
connected to the video product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with regard to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
– 1 –
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
0VMN04033 / HD235UD ★★★★★
PREPARATION FOR USE
SETUP
Connecting to a TV without A/V Terminals
Automatic Channel Set Up
Disconnect the AC power cord of the TV from the AC
outlet.
You can automatically program the tuner to scan only the chan-
nels you receive in your area.
1
• Channel memory programming is NOT needed when you con-
nect the VCR to a cable box or satellite box as in "Connect VCR
to TV Connection". In this case, select the VCR and TV to chan-
nel 3 or 4 the same channel as the RF output channel of the
VCR. Then, the channel you want to record or view may be
selected at the cable box or satellite box.
• Follow the steps below once. Repeat it only if there is a power
failure or if the VCR is unplugged for more than 30 seconds. (In
these cases, the programmed channels are erased.)
• You must follow the steps below before attempting to play or
record a video tape. If you want to play or record a video tape
BEFORE programming the tuner, you can cancel it by pressing
[COUNTER RESET/EXIT].
Disconnect the antenna or cable from the TV.
2
3
4
5
Connect the antenna or cable to the ANT. IN jack of
the VCR.
Connect the VCR to the TV using the RF cable.
Plug the AC power cords of the VCR and TV into the
AC outlets.
[VHF/UHF
[Back of the VCR]
[Indoor antenna]
combination antenna]
[Back of the
UHF/VHF combination TV]
ANT
IN
RF cable
(supplied)
OR
OR
UHF/VHF
[Cable box or satellite box]
You need to connect the antenna or cable to the VCR
OUT
IN
OU
T
1
2
first. Then, connect the VCR power plug into a stan-
dard AC outlet.
From Cable or
Satellite Company
Turn on the TV and set the TV to channel 3. If channel 3
is already occupied for broadcasting, change the RF output
to CH 4, and change the TV channel to CH4.
RF Output Channel
If your TV does not have A/V terminals:
Press [PLAY] on the VCR for 3 seconds during playback.The RF
output channel will change to CH4 from CH3.
(See “RF Output Channel” on page 3 for the detail.)
Turn on the VCR by pressing [POWER]. When the
POWER is on, both the POWER and VCR/TV indicator on
the VCR will be on.
When you want to return to CH3 for RF output channel, press
[PLAY] on the VCR for 3 seconds during playback again. (Default
setting :CH3)
3
4
• There is case that the RF output channel does not change by sit-
uation (For example, when you adjust tracking using
Select the On Screen Language
("ENGLISH" , "FRANCAIS" or
LANGUAGE SELECT
(
)
[CHANNEL
].
ENGLISH
"ESPAÑOL") by pressing [PLAY] or
[STOP]. Then, press [F.FWD].
FRANCAIS
In this case, stop the playback, and start the playback again.
After that, press [PLAY] on the VCR for 3 seconds.
• If there is a power failure or the VCR is unplugged for more
than 30 seconds, the RF output channel setting will return to
CH3.
ESPAÑOL
Begin channel preset by pressing [F.FWD] once. The
5
tuner scans and memorizes all active
channels in your area.
CH 01
• The VCR distinguishes between standard
TV channels and cable channels.
Connecting to a TV with A/V Terminals
AUTO SET UP
Using Optional AUDIO/ VIDEO Output Jacks
With this connection, you can get better pictures and sounds
when playing back a tape if your TV has A/V Input jacks. Please
refer to your TV’s owner’s manual.
Using AUDIO/VIDEO Input Jacks
You can use the A/V input jacks on the front or the back of
the VCR.
After scanning, the tuner stops on the lowest memo-
rized channel. The TV screen returns to TV mode.
• If "AUTO SET UP" appears on the TV screen again, check
the cable connections. Press [F.FWD] once again and the
VCR will begin preset again.
6
To Select a Desired Channel
• To use the input jacks on the back of the VCR, select "L1" posi-
tion by pressing [0], [0], [1] on the remote control or
(
)
You can select the desired channel by using [CHANNEL
]
or directly pressing [Number] on the remote control.
Note for using the Number buttons:
• When selecting cable channels which are higher than 99,
enter channel numbers as a three-digit number.(For example:
117, press 1,1,7)
• You must precede single-digit channel numbers with a zero
(For example: 02, 03, 04 and so on).
(
)
[CHANNEL
].
• To use the input jacks on the front of the VCR, select "L2" posi-
tion by pressing [0], [0], [2] on the remote control or
(
)
[CHANNEL
].
• “L1” or “L2” is found before the lowest memorized channel.
(Example: CH2)
[Playing VCR]
To Preset the Channel Again
AUDIO
Press [MENU] until the main menu appears.
1
OUT
IN
VIDEO
Audio/Video cables
(not supplied)
Select "CHANNEL SET UP" by pressing [PLAY] or
[STOP]. Then, press [F.FWD].
2
3
[TV A/V]
Select "AUTO SET UP" by pressing [PLAY] or [STOP].
Then, press [F.FWD]. After scanning, the tuner stops on
the lowest memorized channel.
IN
L
R
VIDEO
AUDIO
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
To Add/Delete Channels
PLAYBACK FUNCTION
When the VCR automatically program the tuner to scan only the
channels you receive in your area, some channels may be
skipped due to weak signal. You can manually add the channel
in the VCR memory.
Normal Playback
Insert the prerecorded tape. The VCR will
turn on. If the safety tab has been removed,
the VCR will start playback automatically.
1
- MENU -
Press [MENU] until the main menu
TIMER PROGRAMMING
[OFF]
AUTO REPEAT
CHANNEL SET UP
CLOCK SET
1
2
appears.
Turn on the TV and set the TV to channel 3. If channel
3 is already occupied for broadcasting, change the RF out-
put to CH 4, and change the TV channel to CH4.
(See “RF Output Channel” on page 3 for the detail.)
LANGUAGE SELECT
Select "CHANNEL SET UP" by
pressing [PLAY] or [STOP]. Then,
press [F.FWD].
2
Begin playback by pressing [PLAY].
Select "MANUAL SET UP" by pressing [PLAY] or
3
3
4
5
[STOP]. Then, press [F.FWD].
•
Tracking adjustment will be set automatically (Digital
Tracking function) when you start playback. To adjust the
Enter the desired channel number by pressing [PLAY]
or [STOP].
(
)
tracking manually, press [CHANNEL
] on the VCR.
• You cannot manually adjust the tracking of a Still pic-
Add or Delete it from memory by pressing [F.FWD] or
[REW] so that "ADD" or "DELETE" flashes on the TV
screen accordingly.
(
)
ture. However, you may press [CHANNEL
] on
the VCR to remove vertical jitter in a Still picture.
• When a tape has reached the end, the VCR will
rewind the tape to the beginning, eject the tape, and
turn off the VCR automatically.
Exit the Preset mode by pressing [COUNTER
6
RESET/EXIT].
To stop playback, press [STOP].
To Change the On-Screen Language
4
Counter Reset
• You can reset the counter by pressing [COUNTER
RESET/EXIT] on the remote control.
Press [MENU] until the main menu appears.
1
2
3
Select "LANGUAGE SELECT" by pressing [PLAY] or
[STOP]. Then, press [F.FWD].
Still Picture
Press [PAUSE/STILL] during playback to view a still picture on
the TV screen.
¡ If you press [PAUSE/STILL] to freeze the picture, usually there
will be noise lines on the TV screen. This is normal, however,
each time you press [PAUSE/STILL], the lines will change
position.
Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL" by
pressing [PLAY] or [STOP]. Then, press [COUNTER
RESET/EXIT].
• If you accidentally select Spanish or French and need
English: Press [MENU] and choose SELEC. IDIOMA, or
SELECTION LANGUE. Press [F.FWD], and select ENG-
LISH. Finally, press [COUNTER RESET/EXIT].
¡ When the picture begins to vibrate vertically, stabilize the pic-
(
)
ture by pressing [CHANNEL
mode.
]
on the VCR in the Still
¡ After the VCR has been in Still mode for 5 minutes, it will stop
automatically to protect the tape and the video head.
¡ To return to playback, press [PLALY].
Clock Set Up
Select main menu by pressing [MENU].(If the clock is not
1
set, the CLOCK SET menu appears first. In this case, fol-
low step [3].)
Auto Repeat Playback
This feature allows you to play a tape over and over.
Select main menu by pressing [MENU].
1
Select "CLOCK SET" by pressing [PLAY] or [STOP].
Then, press [F.FWD].
2
3
Set the clock.
Select "AUTO REPEAT" by pressing [PLAY] or
2
3
[STOP].
Set the month Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
Begin auto repeat playback by pressing [F.FWD]
so that [ON] appears next to "AUTO REPEAT".
• If the on-screen menu still remains, press [COUNTER
RESET/EXIT] to exit the menu.
You can set AUTO REPEAT to ON or OFF by pressing
the [AUTO REPEAT] on the remote control, too.
Set the day
Press [PLAY] or [STOP]repeatedly.
Then, press [F.FWD].
•
Set the year
Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
The day of the week will appear automatically.
Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
Press [PLAY] or [STOP] repeatedly.
Then, press [F.FWD].
• When you set the Auto repeat mode to [ON] while the
Counter memory mode is ON, the VCR will exit the
Counter memory mode automatically.
Set the hour
•
To cancel the Auto repeat mode, press [F.FWD] at step [3]
so that [OFF] appears next to "AUTO REPEAT".
Set the minute
Press [PLAY] or [STOP]
repeatedly.
Set the AM
or PM
CLOCK SET
Search Functions
MONTH DAY
YEAR
03 15 MON 2004
/
Picture Search
If you want to skip or repeat a scene during playback,
press [F.FWD] or [REW].
HOUR MINUTE AM/PM
05
:
40
PM AM
PM
• Press it again and the VCR will now search in super
high speed. (in the LP/SLP modes only)
• To go back one step, press [REW].
Start the clock by pressing [COUNTER RESET/EXIT] or
4
[F.FWD].
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
RECORDING FUNCTION
TIMER RECORDING
You may set the VCR to start recording while you are away. You
can set eight programs to record on specific days, daily or week-
ly within a 1-year period.
It may be unlawful to record copyrighted material without the
consent of the copyright owner.
Accidental erasure prevention
Insert a tape with its safety tab into the VCR.
To prevent accidental recording on a recorded
cassette, remove its record safety tab. To
record on it later, cover the hole with cello-
1
Record safety tab
Select main menu by pressing [MENU].
phane tape.
2
Before recording, make sure:
•
The desired channel is selected by pressing [Number] on
Select "TIMER PROGRAMMING" by pressing [PLAY] or
[STOP]. Then, press [F.FWD].
(
)
the remote control or [CHANNEL
]. (If you connect-
3
ed the VCR to a cable box or satellite box as in
"Connecting to a TV without A/V Terminals" on page 3,
select the VCR to channel 3 or 4, the same channel as
the RF output channel of the VCR. Then, select the chan-
nel you want to record at the cable box or satellite box. In
this case, you can ONLY record and view the SAME
channel. )
• If you have not yet set the clock, "CLOCK SET" appears. If
so, continue with the step [3] in "CLOCK SET UP" section.
4Then, set the timer recording.
Set the timer.
• There is a tape with its safety tab into the VCR.
• The desired recording speed is selected in SP(standard play) or
SLP(super long play) mode by pressing [SPEED] on the remote
control.
PROGRAM NUMBER
4
DATE
- - / - -
Program number which is not set up flashes.
Press [PLAY] or [STOP] repeatedly for the
desired program number.Then, press [F.FWD].
START TIME - - : - - - -
END TIME - - : - - - -
CHANNEL - -
REC SPEED - -
Tape Speed
Recording/Playback Time
Type of tape
SP mode
SLP mode
T60
1hour
3hour
T120
2hours
6hour
T160
2-2/3hours
8hour
For once: Press [PLAY] or [STOP] to point to "ONCE".
For daily (Monday~Friday): Press [PLAY] or
PROGRAM NUMBER
ONCE
4
[STOP] to point to "DAILY".
For weekly: Press [PLAY] or [STOP] to point to
DAILY
WEEKLY
Viewing and Recording the Same Program
"WEEKLY".
Then, press [F.FWD]
Begin the recording by pressing [RECORD].
.
1
• To temporarily stop recording or resume it, press
[PAUSE/STILL]. After the VCR has been in Pause mode for
5 minutes, it will stop automatically to protect the tape and
the video head from damage.
First, press [PLAY] or [STOP] for the month. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].
First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD].
Press [STOP] when recording is completed.
Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD]
.
.
And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD]
2
OTR (One Touch Recording)
Follow the instructions of "Set the start time" to set the end time.
This feature allows you to set the recording length simply by
pressing [REC/OTR] on the VCR.
Press [PLAY] or [STOP] repeatedly for the desired channel number.
Then, press [F.FWD].
Begin OTR by pressing [REC/OTR] on the VCR repeat-
If you connected the VCR to a cable box or satellite box as in "Connecting
to a TV without A/V Terminals" on page 3, select the VCR to channel 3 or
4 the same channel as RF output channel of the VCR.
1
edly until the desired recording length appears.
REC
OTR(0:30)
OTR(1:00).....
(Normal recording)
Then, select the channel you want to record at the cable box or satellite box.
Leave the cable box or satellite box on for timer recording.
OTR(8:00)
OTR(7:30)
ONE TIME PROGRAM
PROGRAM NUMBER
DATE 05/03 MON
START TIME 07:30 PM
END TIME 08:30 PM
4
Press [PLAY] or [STOP] repeatedly for the
desired tape speed.
Then, press [F.FWD].
CHANNEL
16
REC SPEED SP
SP
SLP
• To go back one step, press [REW].
To set another program, repeat step [4]. To exit, press
[COUNTER RESET/EXIT].
5
6
Press [POWER] to set the timer. The TIMER indicator on
the VCR comes on. TIMER RECORDING WILL NOT BE
ACTIVATED UNLESS YOU TURN THE VCR OFF.
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Hints for Timer Recording
SPECIAL FEATURES
Copying a Video Tape
• If there is a power failure or the VCR is unplugged for more
than 30 seconds, the clock setting and all timer settings will be
lost.
You can make copies of video tapes made by friends or relatives
for your enjoyment.
• If the tape runs out before the end time, the VCR will switch to
the Stop mode immediately, eject the tape and be turned off.
The TIMER indicator will flash.
Warning: Unauthorized recordings of copyrighted video tapes
may be an infringement of copyright laws.
Connect the recording VCR(this unit), the playing VCR (another
source) and your TV using the following diagram.
[TV set]
• If a tape is not in the VCR or does not have the safety tab, the
TIMER indicator flashes and timer recording cannot be per-
formed. Please insert a recordable tape.
•
When all the Timer Recording are completed, the TIMER
indicator flashes. To play or eject the recorded tape, press
the POWER button first, and then press [PLAY] or [EJECT] .
Audio/Video cables
(not supplied)
[Recording VCR]
(this unit)
(Use for monitoring)
ANT
IN
To Stop an Automatic Timer Program already started
Press [STOP/EJECT] on the VCR.
RF cable
(supplied)
AUDIO
OUT
IN
VIDEO
OUT
IN
AUDIO
OUT
IN
OUT
ANT in
VIDEO
To Check, Correct, or Cancel an Automatic Timer Program
[Playing VCR]
(another source)
Turn the power on by pressing [POWER].
1
Insert a pre-recorded tape into the playing VCR.
1
2
3
4
5
6
Select main menu by pressing [MENU].
2
Insert a tape with its safety tab into the recording
VCR.
Select "TIMER PROGRAMMING" by pressing [PLAY] or
[STOP]. Then, press [F.FWD].
3
4
Press [SPEED] on the remote control of the recording
VCR to select the desired recording speed (SP/SLP).
Select the program number which you want to check
by pressing [PLAY] or [STOP]. The details of the selected
program appears on the TV screen.
Select the “L1” or “L2”position on the recording VCR.
See page 3, under “Using AUDIO/VIDEO Input Jacks”.
• Go to the digit you want to change by pressing [F.FWD] or
[REW]. Then, enter correct numbers by pressing [PLAY] or
[STOP].
Press [REC/OTR] on the recording VCR.
Begin playback of the tape in the playing VCR.
• You may cancel the entire program by pressing [REW] dur-
5 ing the program number flashes.
6
• For best results during dubbing, use the VCR’s front panel
controls whenever possible. The remote control might affect
the playing VCR’s operation.
• Always use video-quality shielded cables with RCA-type con-
nectors. Standard audio cables are not recommended.
• You can use a video disc player, satellite receiver, or other
audio/video component with A/V outputs in place of the play-
ing VCR.
Press [COUNTER RESET/EXIT] to exit.
Press [POWER] to return to timer stand-by mode.
Counter Memory Function
To Monitor the Recording
Use this feature to memorize the beginning of recording
start point.
Turn on the TV and set the TV to channel 3. If channel 3
1
is already occupied for broadcasting, change the RF output
to CH 4, and change the TV channel to CH4.
(See “RF Output Channel” on page 3 for the detail.)
Press [COUNTER RESET/EXIT]
on the remote control to reset
the counter.
REC
1
2
Press [VCR/TV] on the remote control of the recording
VCR so that the VCR/TV indicator comes on.
Press [COUNTER MEMORY] on
the remote control so that “M”
appears on the TV screen.
SP
M0:00:00
2
Auto Rewind
Record the program.
3
4
When a tape has reached the end during recording, playback,
or fast-forward, the tape will automatically rewind to the begin-
ning. After rewinding finishes, the VCR will eject the tape and
turn itself to off.
• The VCR will not rewind the tape automatically during timer
recording or One Touch Recording.
After recording, press [STOP] then [REW].
• When “0:00:00” is reached, rewinding operation goes to
stop. And you can view the recording program.
• [COUNTER MEMORY] does not function if the Auto repeat
mode is set to [ON]. In this case, set the Auto repeat mode
to [OFF].
Real Time Tape Counter
• This shows the elapsed recording or playback time in hours,
minutes, and seconds. (The displayed time will not change dur-
ing blank portions on the tape.)
• To cancel the Counter memory mode, press [COUNTER
MEMORY] so that “M” disappears from the TV screen.
• The indication will appear when the tape is rewound further
than “0:00:00” on the tape counter.
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
TROUBLESHOOTING GUIDE
If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the PROBLEM in the
left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem.
PROBLEM
No power.
CORRECTIVE ACTION
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
Timer recording is impossible.
• Make sure the timer recording is set correctly.
• Make sure the power is off.
• Make sure the VCR clock is set correctly.
• Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.
• Adjust tracking control for a better picture by pressing [CHANNEL
Cannot go into Record mode.
Playback picture is partially noisy
(
)
.
] on the VCR.
Cannot view a tape but the
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .
• Make sure the VCR is not in the Menu mode.
audio is OK
No or poor playback picture.
•Turn on the TV and set the TV to channel 3. If channel 3 is already occupied for broad-
casting, change the RF output to CH 4, and change the TV channel to CH4.
(See “RF Output Channel” on page 3 for the detail.)
• Fine tune your TV.
TV programs cannot be seen
normally.
• Re-check the ANT. IN and ANT. OUT connections. See page 3.
• Press [VCR/TV] on the remote control so that the VCR/TV indicator on the VCR dis-
appears.
No VCR operation from the
infrared Remote Control.
• Make sure the power plug is connected to an AC outlet.
• Check batteries in remote control.
Video or color fades in and out
when making a copy of a video tape.
• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
SPECIFICATIONS
Operating temperature :
Converter output :
Power requirement :
Power consumption :
41°F~104°F (5°C~40°C )
VHF Channel 3 or 4.
120V, 60Hz
Dimensions :
W 14-3/16” (360mm)
H 3-5/8” (92mm)
D 8-1/2” (216mm)
2
14 Watts
Number of video heads :
Weight :
3.97 lbs. (1.8 Kg.) (approx.)
Supplied Accessories
RF Cable
Owner’s Manual
Remote control
Two AA batteries
Owner's Manual
(NA310UD/NA360UD)
(WPZ0901TM002)
(0VMN04033)
• Designs and specifications are subject to change without notice and legal obligation.
• If there is a discrepancy between languages, the default language will be English.
MAINTENANCE
Servicing
Auto Head Cleaning
Should your VCR become inoperative, do not try to correct
the problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call our
• Automatically cleans video heads as you insert or remove a
cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted while
the TV program reception is clear. Dirt accumulated on the
video heads after long periods of use, or the usage of rental
or worn tapes can cause this problem. If a streaky or snowy
picture appears during playback, the video heads in your
VCR may need to be cleaned.
h1e-lp8lin0e 0at -242-7158
to locate an Authorized Service Center.
Cabinet Cleaning
1. Please visit your local Audio/Video store and purchase a
good quality VHS Video Head Cleaner.
• Wipe the front panel and other exterior surfaces of the VCR
with a soft cloth immersed in lukewarm water and wrung dry.
• Never use a solvent or alcohol. Do not spray insecticide liq-
uid near the VCR. Such chemicals may cause damage and
discoloration to the exposed surfaces.
2. If a Video Head Cleaner does not solve the problem,
please call our help line at 1-800-242-7158 to locate an
Authorized Service Center.
NOTES:
• Remember to read the instructions included with the video
head cleaner before use.
• Clean video heads only when problems occur.
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
CONTROLES DE FUNCIONAMIENTO Y FUNCIONES
Mando a distancia
Panel frontal
Indicadores
1. Botón de expulsión (EJECT)
1. Compartimiento del videocasete
2. Botón de avance rápido
3. Botón de reproducción
14. Indicador de alimentación
2. Botones de número (NUMBER)
15. Indicador de videograbadora/televisor
16. Indicador de videocasete introducido
17. Indicador del temporizador
3. Botón de menús (MENU)
4. Botón de grabación (RECORD)
4. Botón de rebobinado
5. Botón de velocidad (SPEED)
5. Botón de parada/expulsión
6. Botón de grabación con un toque
7. Botón de menús
18. Indicador de grabación
6. Botón de rebobinado (REW)
Panel trasero
7. Botón de parada (STOP)
8. Botón de reproducción (PLAY)
8. Indicadores
19. Terminal de salida de audio
20. Terminal de entrada de audio
21. Terminal de entrada de antena
22. Terminal de salida de antena
23. Terminal de entrada de vídeo
24. Terminal de salida de vídeo
25. Cable de alimentación
9. Botón de avance rápido (F.FWD)
9. Sensor de control remoto
10. Botones de selección de canales
11. Botón de la alimentación
12. Terminal de entrada de audio
13. Terminal de entrada de vídeo
10. Botón de visualizador (DISPLAY)
11. Botón de pausa/imagen fija (PAUSE/STILL)
12.Botón de memoria del contador (COUNTER MEMORY)
13.Botón de salida/reposición (COUNTER RESET/EXIT)
14.Botón de repetición automática (AUTO REPEAT)
15.Botones de selección de canales (CHANNEL)
16.Botón de la alimentación (POWER)
17.Botón de videograbadora/televisor (VCR/TV)
PREPARACIÓN DE CANALES
PREPARACIÓN DEL RELOJ
(La antena o la caja de televisión por cable
deberá estar conectada)
1. Pulse [MENU] hasta que aparezca el menú principal. (Si el
reloj no está puesto en hora y se pulsa [MENU], el menú
AJUSTE DE RELOJ aparece en primer lugar. En este
caso, siga el paso 3.)
2. Pulse [PLAY] o [STOP] para indicar a "AJUSTE DE
RELOJ". Luego, pulse [F.FWD].
NOTA: Cuando utilice su nueva videograbadora por primera
vez, o en el caso de ser necesario después de producirse un
fallo en la alimentación, la videograbadora se pondrá inicial-
mente en el modo de preajuste cuando se pulse [POWER].
3.
1. Encienda el televisor y ponga el televisor en el canal 3.
2. Pulse [POWER] para encender la videograbadora.
3. Seleccione "ENGLISH" , "FRANCAIS"(French) o
"ESPAÑOL" (Spanish) pulsando [PLAY] o [STOP]. Y
luego pulse [F.FWD].
Pulse repetidamente [PLAY] o [STOP].
Ajuste el mes.
Luego, pulse [F.FWD].
Ajuste el día.
Ajuste el año.
Ajuste la hora.
Pulse repetidamente [PLAY] o [STOP].
Luego, pulse [F.FWD].
Pulse repetidamente [PLAY] o [STOP].
Luego, pulse [F.FWD].
4. Pulse una vez [F.FWD].
Pulse repetidamente [PLAY] o [STOP].
Luego, pulse [F.FWD].
El sintonizador explora y memoriza
todos los canales activos de su zona.
Tras la exploración, el sintonizador se
detiene en el canal memorizado más
bajo.
Ajuste el minuto. Pulse repetidamente [PLAY] o [STOP].
Luego, pulse [F.FWD].
Ajuste la
Pulse repetidamente [PLAY] o [STOP].
mañana (AM) o
la tarde (PM).
AJUSTE DE RELOJ
MES
03
DIA
AÑO
/
15 LUN 2004
HORA MINUTO AM/PM
• Para volver atrás un paso, pulse [REW].
4. Pulse [COUNTER RESET/EXIT] o [F.FWD]
05
:
40
PM AM
PM
para poner en funcionamiento el reloj
.
FUNAI CORPORATION LIMITED WARRANTY
Funai Corporation will exchange or repair this product, at its option, in the
event of defect in materials or workmanship as follows:
EXCHANGE DURATION:
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL UNITS), ANY COSMETIC
PARTS, COMPLETE ASSEMBLY PARTS, DEMONSTRATION OR FLOOR
MODELS.
1-90 DAYS:
FUNAI CORPORATION will exchange for a new unit with-
out charge for a period of ninety (90) days from the date of
original retail purchase.
FUNAI CORPORATION will exchange for a factory-ser-
vice-to-new-condition unit for a charge of a retailed price
unit for the period of ninety one (91) days to three hun-
dred sixty five (365) days from the date of original retail
purchase.
FUNAI CORPORATION AND ITS REPRESENTATIVES OR AGENTS SHALL
IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSE-
QUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE
OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES INCLUDING THE WARRAN-
TY OF MERCHANT ABILITY, AND FITNESS FOR A PARTICULAR PUR-
POSE, THAT ARE HEREBY DISCLAIMED BY FUNAI CORPORATION AND
ITS REPRESENTATIVES OR AGENTS IN THE UNITED STATES.
91-365 DAYS:
REPAIR DURATION:
LABOR:
FUNAI CORPORATION will provide the labor without
charge for a period of ninety (90) days from the date of
original retail purchase.
FUNAI CORPORATION will provide parts to replace
defective parts without charge for a period of one (1) year
from the date of original retail purchase. Certain parts
are excluded from this warranty.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED
BY A FUNAI AUTHORIZED CENTER. THIS WARRANTY IS VALID WHEN
THE PRODUCT IS DELIVERED PREPAID TO A FUNAI AUTHORIZED
SERVICE FACILITY.
PARTS:
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF AT
ANY TIME DURING THE WARRANTY PERIOD YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE EXCHANGE OR REPAIR OF THIS
PRODUCT, PLEASE CONTACT FUNAI CORPORATION.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PUR-
CHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL
RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PROD-
UCT TO OBTAIN EXCHANGE OR SERVICE UNDER THIS WARRANTY
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product
are altered, replaced, defaced or missing. This FUNAI CORPORATION
Limited warranty applies only to product purchased and used in the United
States.
This warranty only covers failures due to defects in material or workmanship,
which occur during normal use. It does not cover damage which occurs in
shipment, or failures which are caused by repairs, alterations, or parts not
supplied by FUNAI CORPORATION, or damage which results from accident,
misuse, abuse, mishandling, misapplication, alteration, faulty installation,
improper maintenance, commercial use such as hotel, rental or office use of
this product, or damage which results from fire, flood, lightning or other acts
of God.
ATTENTION:
FUNAI CORPORATION RESERVES THE RIGHT TO MODIFY
ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE
.
For information about your product, or for information on how
to exchange or repair your product, telephone or write to the
following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-242-7158
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
– 8 –
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
Printed in China
|