OWNER’S
MANUAL
MODEL NO.
FT1150
50” UNIVERSAL MOUNT
R
TRAILMOWER
For Vehicle Mounting Options See
Details On Page-16
IMPORTANT
Read and follow all
Safety Precautions
and Instructions
before operating this
equipment.
Assembly
Operation
Service and Adjustment
Repair Parts
Rev. 04-147
1602 CORPORATE DRIVE, P.O. BOX 67, WARRENSBURG, MISSOURI 64093
PHONE 660-747-8183 FAX 660-747-8650
Made In The
Manufacturing quality lawn care equipment since 1945
USA
ONFT1150
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Turn off the blades when not mowing. Before leaving the machine, turn off the
blades and stop the engine.
•
•
Watch for traffic when operating near or crossing roadways.
Do not operate the mower if it has been dropped or damaged in any manner or if
the mower vibrates excessively. Excessive vibration is an indication of damage.
Repair mower as necessary.
•
Dress properly. Do not operate the mower when barefoot or wearing open
sandals. Wear only solid shoes with good traction when mowing.
•
•
Do not operate the machine while under the influence of alcohol or drugs.
Operate self-propelled machines up and down slopes. There is significant risk of
overturns when operating across slopes. Operate walk-behind machines across
slopes. There is a significant risk of slipping under a walk-behind machine when
operating up and down slopes.
•
•
Never tamper with safety devices. Check their proper operation regularly.
Stop and inspect the equipment if you strike an object. Repair, if necessary,
before restarting.
•
•
Never make adjustments or repairs with the engine running.
Mower blades are sharp and can cut. Wrap the blades or wear gloves, and use
extra caution when servicing them.
? Did You Know ?
Swisher Mower & Machine Co. was started in 1945.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
The manufacturer’s warranty to the original consumer purchaser is: This product is free from
defects in materials and workmanship for a period of one (1) year from the date of purchase by
the original consumer purchaser. We will repair or replace, at our discretion, parts found to be
defective due to materials or workmanship. This warranty is subject to the following limitations
and exclusions:
1) Engine Warranty
All engines utilized on our products have a separate warranty
extended to them by the individual engine manufacturer. Any
engine service difficulty is the responsibility of the engine
manufacturer and in no way is Swisher Mower Co., Inc. or its
agents responsible for the engine warranty. The Briggs & Stratton
Engine Service Hot-Line is 1-800-233-3723. The Tecumseh
Engine Service Hot-Line is 1-800-558-5402.
2) Commercial Use
3) Limitations
The warranty period for any product used for commercial or rental
is limited to ninety (90) days from the date of original purchase.
This warranty applies only to products which have been properly
assembled, adjusted, and operated in accordance with the
instructions contained within this manual. This warranty does not
apply to any product of Swisher Mower Co., Inc., that has been
subject to alteration, misuse, abuse, improper assembly or
installation, shipping damage, or to normal wear of the product.
4) Exclusions
Excluded from this warranty are normal wear, normal adjustments,
and normal maintenance.
In the event you have a claim under this warranty, you must return the product to an authorized
service dealer. All transportation charges, damage, or loss incurred during transportation of parts
submitted for replacement or repair under this warranty shall be borne by the purchaser. Should
you have any questions concerning this warranty, please contact us toll-free at 1-800-222-8183.
The model number, serial number, date of purchase, and the name of the authorized Swisher
dealer from whom you purchased the mower will be needed before any warranty claim can be
processed.
THIS WARRANTY DOES NOT APPLY TO ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES AND ANY IMPLIED WARRANTIES ARE LIMITED TO THE SAME TIME
PERIODS STATED HEREIN FOR ALL EXPRESSED WARRANTIES. Some states do not
allow the limitation of consequential damages or limitations on how long an implied warranty
may last, so the above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights and you may have other rights, which vary from state-to-state. This is a
limited warranty as defined by the Magnuson-Moss Act of 1975.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
STARTING THE ENGINE
•
See engine manufacturer’s instructions for the type and amount of oil and fuel used.
Do not overfill.
Park vehicle and mower on a level surface, set the vehicle parking brake, and disengage
blades.
Engine must be level to accurately check and fill oil.
•
•
•
•
•
•
•
Check spark plug wire, oil, and fuel.
Check all electrical connections.
Make certain console assembly is secured to vehicle.
Set engine throttle control to the “CHOKE” position.
Turn key switch to the “START” position
Set engine throttle at desired RPM.
STOPPING THE ENGINE
•
Turn key switch to the “OFF” position.
BREAKING IN YOUR MOWER
•
•
•
•
Set vehicle parking brake or chock wheels to prevent accidental rolling.
Start engine.
Engage blades.
In a safely monitored environment, i.e. no children, allow blades to rotate and engine to
idle for 5 minutes. This breaks in the belts and the engine.
Stop mower.
•
CAUTION!
SHUT OFF MOWER ENGINE AND REMOVE SPARK PLUG WIRE FROM
SPARK PLUG BEFORE MAKING ANY ADJUSTMENTS TO THE MOWER.
MOWER HEIGHT ADJUSTMENT
•
•
Never make any adjustments while mower is running.
The cutting range is approximately 1.5” to 4.5”. The height has been measured from the
ground to the blade tip without the engine running.
Rotate height adjust crank handles in a clockwise direction to lift the mower deck. A
•
counter-clockwise direction is used to lower the mower deck.
Make sure the height adjustment is the same at side crank handles. For best results, see
•
Graduated scales are for reference
“SUGGESTED MOWING PRACTICE” section.
only, not the actual cutter height
.
•
Place crank handle in a retracted position to maintain height adjustment.
START MOWING
•
Clear mowing area of debris.
•
•
•
•
Check vehicle to mower connection.
Start mower engine.
Engage clutch lever.
Begin mowing slowly.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
STOP MOWING
•
•
•
Bring vehicle to a full stop.
Disengage clutch lever by moving lever to center position.
Turn key switch to “OFF” position.
TRANSPORTING MOWER
•
•
Never transport unit with engine running.
If transporting unattached from tow vehicle, remove spark plug wire and place it where
contact with the spark plug cannot be made.
SUGGESTED MOWING PRACTICES
•
Operate mower engine at full throttle to assure the best cutting performance and
maximum material discharge.
Allow wet grass to dry. Clumps of wet grass will collect under the mowing deck.
Mowing should be started with tow vehicle in low gear and increased only as safe
•
•
mowing conditions permit. This speed should not exceed 5 MPH.
The average lawn should be cut to approximately 2.5” during the cool season and to over
•
3” during the hot months.
For a healthier lawn and better aesthetics, your lawn should be mowed often and after
•
moderate growth.
•
When cutting high or dense grass areas go slowly. Some areas may need to be cut twice.
The second cut should be at 90 degrees to the first, if possible.
Never remove more than 1/3 of the grass length at any one time
•
GENERAL TROUBLE SHOOTING
•
The mower does not cut level.
Level deck, making sure height adjustments are equal.
Check air pressure of all tires; make sure they are equal (about 25-30 psi).
Check blade attachment.
o
o
o
•
•
The engine will not start.
Disengage blades, turn toggle switch to “OFF” position, check all electrical
connections, and inspect spark plug and wire.
Engine runs poorly.
o
See engine manual.
Check throttle adjuster.
Replace fuel, clean fuel filter and fuel line.
o
o
o
IF PROBLEMS PERSIST HAVE A QUALIFIED MECHANIC SERVICE THE
MOWER. NEVER ATTEMPT TO MAKE AN ADJUSTMENT THAT YOU ARE
NOT SURE IS CORRECT. DOING SO CAN CAUSE OTHER PROBLEMS.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY AND OPERATIONAL DECALS
Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc.
OD15-Important Decal
OD45 – Warning Decal
Decal located
On grass chute
[not shown]
OD33 – Speed Decal
OD10--BLADE ENGAGE
DECAL
OD55 – Triangle Danger Decal
OD99- ON / OFF
DECAL
OD11-
NO STEP DECAL
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5
FIGURE-1
SEE DETAIL
BELOW- # 12
6
4
12
10
6
11
FRAME ASSEMBLY
FIGURE 1
1
2
8
7
Item No.
Description
Frame Weldment
Part #
5147TK
3
1
DETAIL-12
2
Caster Weldment
5072
7
3
Tire & Wheel NO Tread 4.10x3.5-5
Bearing, Flanged 3/4 ID
3/4 Push Nut BLK Plastic
3/4ID X 1 1/4OD 10 GA. Washer
1/8 X 1 Cotter Pin
5057
14
13
4
CB58
5
NB-687
NB-195
NB-126
3664
6
7
8
Sway Bar Right
9
Sway Bar Left
3665
10
11
12
13
14
15
16
1/2 USS Flat Washer
1/2-13 X 7 3/4 Eye Bolt
Height Adj. Assembly
5/16 PAL NUT
NB-177
6599
15
H7NTK
NB276
H7K
16
KNOB
# 12
CRANK ROD
ES214
ES225
HEIGHT ADJ. TUBE
? Did You Know ?
In 1956 Swisher Mower & Machine Co. introduced the first zero turning radius riding mower.
The design of this 3-wheeled mower included safety features ahead of its time. In January 2000,
it was named one of the century’s top inventions by Popular Mechanics Magazine.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
FIGURE 2
5
33
See Detail
(Page 14)
8
36
14
4
6
See Detail
(Page 13)
20
7
19
26
3
34
12
11
10
15
33
Not Pictured
16
T2SM Spring
35
2
17
9
18
1
14
See Detail
(Page 13)
DECK ASSEMBLY
FIGURE 2
Item #
Description
50" Deck Weldment
Engage Cable Mount
Grass Chute Mount
Grass Chute Weldment
BELT COVER
Part #
5158TK
5095TK
6030TK
5127TK
5103TK
NB-281
NB-121
9100
Item #
Description
5/16-18 X 4 Carriage Bolt
3/8 USS Washer
3/8-24 X 3 Bolt
Idler Pulley OD-3.25", ID-3/8" B527
Part #
NB-101
NB-271
NB-131
1
2
3
4
5
6
7
8
18
19
20
26
33
34
35
36
3/8-16 Nylok Nut Jam
Engine Idler
Anti - Scalp Roller
5/16 - 18 X 3/4'' Bolt
NB-182
5115TK
AS-001
NB596
1/2-13 Nyloc Nut
1/2-13 Hex Nut
Chute Spring
9
Anti-Scalp Roller
3/8-16 Lock Nut
1/2-13 X 3 HCC GR5 Bolt
AS-001
NB-280
NB-131
10
11
12
14
15
16
17
5/16-18 X 8 1/2 HCC GR2 Bolt NB-136
5/16-18 Nyloc Nut
1/2-13 X 2 HCC GR5 ZP
1/2-13 Nyloc Nut
NB-181
NB-509
NB-281
NB-575
3/8-16 X 5 1/2 GR5 ZP
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Console Assembly
Figure 7
3
Item No.
Description
Console Weldment
Clutch Cable Clevis
T Handle
Part #
5136TK
9023
1
2
3
4
8
2
6
10
9
4463TK
4461TK
NB-591
NB-274
NB-518
NB-597
NB-181
NB-560
NB-180
KSM
Link for Console
5
6
5/16-18 X 1 1/2 Torx Pan ZP
1/4 SAE Washer
4
7
8
9
1/4 X 1 1/2 Clevis Pin
3/32 X 3/4 Cotter Pin
5/16-18 Jam Nut
11
7
10
11
1/4-20 X 1 1/4 HCC GR5 ZP
1/4-20 Nylok Nut
5
12
Key Switch
Not Shown
Wiring Harness
WHBP50
5135TK
NB137
NB201
NB197
13
14
15
16
Throttle Cover [painted ]
8 X3/8 Sheet Metal Screw
8-32 Kep Nut
1
14
16
8-32 x 1/2 Phil Truss
12
15
13
BELT CONFIGURATION
Figure 5
3752
T 239
(39” Belt)
(112” Belt)
WHBP50
(Complete Wiring
Harness)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BLADE DRIVER
SET-UP
11
4
Figure 6
19
8
19
7
7
10
2
18
17
Outer Blade
Driver
Configuration
Center Blade
Driver
Configuration
1
3
14
2
10
15
16
5
9
6
13
12
Blade Driver Assy.
9058- 5.75” (Center Shaft)
9018- 4.25” (Outer Shafts)
26
31
22
29
24
23
25
28
20
19
21
27
13
Download from Www.Somanuals.com. All Manuals Search And Download.
See Detail
MOTOR BASE ASSEMBLY
Figure 3
10
Item No.
Description
Motor Base
Heat Shield
Part #
5102TK
5094TK
5097TK
AS-001
NB-575
NB-182
NB-139
NB-102
NB-180
1
2
3
4
5
6
7
8
10
Belt Guard
9
Anti-Scalp Roller
3/8-16 X 5 1/2 GR5 ZP
3/8-16 Nyloc Nut
1/4-20 HX NUT
1/4-20 X 1
1
2
7
9
10
1/4-20 Flange Nut
5/16-18 X 2 1/2 HCC GR5 ZP NB-253
3
6
8
5
4
13
FIGURE 4
ENGINE SET-UP
Item No.
Description
Part #
13
14
15
16
17
18
19
20
21
22
23
24
25
11- HP B&S Engine
3/8-24 X 1 Engine Bolt Locktite NB-452N
N/A
Washer Belleville
1/4 X 1 Key Stock
Engine Pulley- 5.5"
Engine Pulley Spacer Short
Engine Pulley Spacer Long
5/16-18 X 1-3/4 BOLT
5/16 USS Washer
5/16-18 Flge. Nut
Belt Guide
699
9031
688
689S
689L
NB515
NB556
NB170
6000
TR150W
NB181
18
20
16
17
24
15
19
22
Washer
5/16-18 Nyloc Nut
14
21
25
23
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
FIGURE 9
Attachment Options
TM
Quick Switch Mount kit
Detail-1
PART# 2646
.
Attaching unit to operate in the front mount
2
TM
3
position
1
(Quick Switch Mount kit sold separately)
Detail-1 , 3
Item No.
Description
Part #
1
2
Mount Pin
5153TK
NB506
3/16 Click Pin
Detail-3
PART# 9146
16
Download from Www.Somanuals.com. All Manuals Search And Download.
REPAIR PARTS
R
Your 50’’ Trailmower has been produced with components designed specific to
this machine. Although standard V-belts, springs, bearings, blades, pulleys,
hardware, etc. look similar to parts used on other machinery, they may in some
cases be made of a different construction and/or materials.
GENERAL MAINTANANCE / REPAIR LOG
? Did You Know ?
TM
Swisher ATV Quick Switch
System
Swisher Log Splitters
Swisher products pioneered tag along type residential mowers in the 1980’s with its 40’’ Trailmower. R
Today, Swisher offers a full line of products which include log splitters, and a wide range of ATV
accessories.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
50” UNIVERSAL MOUNT
R
TRAILMOWER
Each mower has its own model number. Each engine has its
own model number. The model number for the mower will be
found on the right hand side of the drive belt housing. The
model number for the engine will be found on the top of the
blower fan housing.
All mower parts listed herein may be ordered directly from
Swisher Mower & Machine Co., Inc. or your nearest Swisher
dealer.
OWNER’S
MANUAL
All engine parts may be ordered from the nearest dealer of the
engine supplied with your mower.
WHEN ORDERING PARTS, PLEASE HAVE THE
FOLLOWING INFORMATION AVAILABLE:
MODEL NO.
* PRODUCT – 50” UNIVERSAL MOUNT
* SERIAL NUMBER - _______________
* MODEL NUMBER - _______________
* ENGINE MODEL NUMBER - _______________
TYPE - _______________
FT1150
* PART NUMBER WITH PAINT CODE
* PART DESCRIPTION
TELEPHONE - 1-800-222-8183
FAX - 1-660-747-8650
SWISHER MOWER & MACHINE CO., INC.
1602 CORPORATE DRIVE
P.O. BOX 67
WARRENSBURG, MO 64093
SWISHER MOWER & MACHINE CO. ,INC.
PRINTED IN
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Sierra Monitor Corporation Stud Sensor PSE530 User Manual
SonicWALL Network Router Internet Security Appliances User Manual
Sony Digital Photo Frame DPF VR100 User Manual
Sony DVD Player DVP CX875P User Manual
Sony Impact Driver MDS NT1 User Manual
Sony MiniDisc Player MDS S707 User Manual
Sony TV Mount MB 506 User Manual
Sony Universal Remote RM VZ320 User Manual
Sony VCR SLV X9D User Manual
Speco Technologies Home Security System SIPMPBVFH User Manual