VM-HT19LCD
High Resolution 19” LCD MONITOR
USER MANUAL
Speco Technologies
200 New Highway
Amityville, NY 11701
800-645-5516 / www.specotech.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and usage instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a
swimming pool.
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious
damage to the unit. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings at the rear cabinet and bottom are provided for ventilation, these are to ensure reliable operation of the unit,
and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by
placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
10. POWER SOURCE
This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of
power supply to your home, consult your appliance dealer or local power company.
11. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
12. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line
surges.
13. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or
where it can fall onto or against such power lines or circuits. When installing an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits, as contact with them might be fatal.
14. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
15. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could
result in fire or electric shock. Never spill or spray any type of liquid into the unit.
16. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
17. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure
to do so may cause product damage. Read the owner's manual of the other equipment carefully and follow the instructions when
making any connections.
18. LCD
Do not press on or jolt the LCD panel. Doing so may cause the LCD panel glass to break and injury may occur. Should the LCD
panel be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause poisoning. If you have got it into your
mouth, wash it out and consult your doctor. If your hands or clothes have touched it, wipe them with alcohol and a cleaning cloth
and then wash them well.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
z
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
This device complies with Part 15 FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference that may
cause undesired operation
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Warning…………………………………………………………………………………………………… 2
Important Information…………………………………………………………………………………… 3
Safety Precautions………………………………………………………………………………………..4
Table of Contents………………………………………………………………………………………… 5
Components………………………………………………………….. …………………………………. 5
Feature……………………………………………………………………………………………………. 6
Exploring Your New Monitor……………………………………………………………………………..7
Backside Connections…….………………………………………………………………………….…. 8
Selecting a Location for the Monitor…………………………………………………………………… 8
Connecting your Monitor…………………………………………………………………………………9
Connecting Device………………………………………………………………………………………. 10
Setup your Monitor……………………………………………………………………..………………... 11
General Setup……………………………………………………………………………………….…… 12
Video Setup………………………………………………………………………………………….…… 13
VGA Setup…………………………………………………………………………………………………14
Audio Setup………………………………………………………………………………………………. 14
PIP Setup……………………………………………………………………………………………….… 16
LCD Monitor Mounting Guide……………………………………………………………………………17
Desktop…………………………………………………………………………………………… 17
Mounting the monitor on the rack……….………………………………………………………17
Arm Mount (VESA standard)……….………………………………………………………..…. 17
Troubleshooting………………………………………………………………………………………..… 18
LCD Color Monitor Specifications………………………………………………………………….….. 19
LCD Color Monitor Dimensions ……………………………………………………………………..… 20
Components
(1) LCD Color Monitor
(2) Accessories
(a) Power cord
1
1
1
1
(b) User Manual
(c) VGA Cable
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
■Professional TFT LCD for surveillance with multiple connections.
■Compatible with VGA(640X480), SVGA(800X600), XGA(1024X768), SXGA(1280X1024) resolution,
■Picture-In-Picture feature that allow multi-picture display
■High brightness level and contrast ration with super wide viewing angle
■Built-in 3D comb filter and 3D de-interlace for crispy picture performance
■Fast response time and refresh rate without time lagging.
■Provides 6500K and 9300K color temperature selection for user’s preference
■Video inputs support NTSC / PAL standards
■Provides Key Lock and power memory function for easy management
■CCD mode control that enable auto-adjust incoming video signal level
■Video looping output supports 75 ohm auto termination
■Support audio and live-out function with stereo phone jack output
■VESA standards (100mm X 100mm) bracket
■Optional rack mount bracket for 19” rack console
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Exploring Your New Monitor
You can operate your monitor by using the buttons on the front panel. The side panels provide the
inputs to connect other equipment to your monitor.
Front Panel
Back
Side
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Connections
1, 2 AUDIO 2 IN (R, L)
Stereo Audio Signal Input, this input is for AV2
(Refer to Note below)
3, 4 AUDIO 2 OUT (R, L)
Audio looping outputs for AUDIO 2
5, 6 AUDIO 1 IN (R, L)
1
2
(R)
(L)
3
4
7
8
(R)
(L)
(R)
(L)
5
6
(R)
(L)
Stereo Audio Signal Input, this input is for AV1
or S-Video (Refer to Note below)
7, 8 AUDIO 1 OUT (R, L)
9
1 0
11
1 2
1 3
Audio looping outputs for AUDIO 1
9
S-VIDEO IN
Y/C separated signal input
VIDEO 2 OUT
Video looping output for VIDEO 2
VIDEO 2 IN
Composite signal Input for VIDEO 2
VIDEO 1 OUT
Video looping output for VIDEO 1
VIDEO 1 IN
10
11
12
13
14
1 4
1 5
16
17
Composite signal Input for VIDEO 1
DC OUTPUT
DC 12V / 500mA power output
(Supporting for PVM unit)
PC AUDIO IN
15.
16
VGA IN
17.
AC POWER SOCKET
AC100V~240V Input
Note: Connections of Audio
Audio 1
Audio 2
PC Audio
PC
ˇ
AV1
ˇ
ˇ
AV2
ˇ
S-Video
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your Monitor
If you don’t have experience in electronic equipment connection before, you may wish to read this
section. (Cables are not supplied, just for reference)
z
Audio cables are usually color coded according to use: red and white for audio. The red audio cable
is for the stereo right channel, and the white audio cable is for the stereo left (or mono) channel. If
you look at the rear panel of the Monitor, you will see that the terminals are color coded in the same
manner as the cables.
z
S-video cables provide better picture performance than standard video cables. S-video cables can
only be used with S-video compatible components.
z
BNC cable provides better connection and picture performance.
.
NOTE:
RCA Audio Cable
To prevent equipment damage,
Do not plug in any power cords until you have
finished connecting all equipment.
S-Video Connector
BNC Connector
PC Audio Connector
VGA Connector
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Accessories
a. Connect PC to Monitor through VGA connector as shown on the above picture
b. Connect External device such as DVD or Game Player to Monitor as shown on
the above picture
c. Connect CCD Camera 1 and 2 to Monitor through Video Input 1 and 2
(BNC Connector) as showing on the above picture
d. Support Resolution
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup your Monitor
AUTO:
Auto-optimize displaying picture under PC mode.
Enter: This “ Auto” Button can be either “Enter” function in OSD Menu)
CCD Mode: Under AV/1 / AV2 / S-Video press Auto can be changed to
CCD/Video mode toggle.
MENU:
OSD menu ON / OFF control.
(EXIT Item)
ADJUST:
Increase or decrease the value on OSD menu.
Up:
Increase value or turn ON / OFF function.
Down: Decrease value or turn ON / OFF function
SOURCE: Select input signal from AV1, AV2, S-Video or VGA (PC).
POWER: Monitor power ON / OFF. At OFF mode, monitor will be at standby status.
Green Light:
Orange Light:
Red Light:
ON Mode
Power Saving (Refer to not below)
OFF Mode
Note: 1.
AV1, AV2, S-Video: When there is no input signal, LCD monitor
will into Power Saving mode after 60 seconds.
2.
3.
VGA: When there is no input signal, LCD monitor will into power
saving mode after 5 seconds.
PIP: When there is no signal on both input sources, LCD
monitor will into Power Saving mode after 120 seconds.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
General Setup
Auto Source Detect :
OSD Language :
Power ON Control :
Key Lock :
The monitor will auto detect the video source when power ON.
Multi-Language selection in English.
This function is to assign a specific video signal when power ON.
The Key-Lock function is provided to prevent tempering.
To release key lock function press AUTO and DOWN
Power Memorize :
Channel Display :
CCD Mode:
This function enables the monitor to memorize the previous power
status before power break.
This function is to allow the channel title to be displayed on the
monitor.
If video signal source directly comes from CCD camera, using CCD
Mode is suggested to obtain better picture performance.
Default :
Return to factory default value.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Setup
Brightness :
Contrast :
Adjusts the overall picture shade and brightness.
Permits adjustment of contrast between light and dark areas of the
picture.
Color :
Adds coloring to the black and white picture content (of a color
signal), and is usually set for viewer’s preference in color saturation.
TINT :
Adjusts all the colors on the screen, but is most noticeable to the eye
in reds and yellows, and is also usually set for pleasing face tones.
Sharpness :
Sets the desired sharpening enhancement to the picture.
Selects color temperature of either 6500°K or 9300°K.
Selection of picture size.
Color Temperature :
Scale Mode :
H-position :
V-position :
Allows adjustment for horizontal position.
Allows adjustment for vertical position.
AGC Control :
This function provides a small scale of backlight enhancement to
compensate the insufficient luminance.
Default :
Return to factory default value.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
VGA Setup
A uto
No
80
100
9300
50
50
50
B rightness
C ontr ast
C olor Temp erat ure
H -pos ition
V-Pos ition
C lock
P hase
D efau lt
50
No
Auto :
Auto detects screen detail data such as clock and phase.
Adjusts the overall picture shade and brightness.
Brightness :
Contrast :
Permits adjustment of contrast between light and dark areas of the
picture.
Color Temperature :
Selects color temperature of either 6500°K or 9300°K.
Allows adjustment for horizontal position.
Allows adjustment for vertical position.
H-position :
V-position :
Clock :
Is used to adjust best picture quality. It adjusts the numbers of the
pixel clock across one line time. Therefore it can affect the picture
position and size.
Note: improper adjustment will caused image failure.
Phase :
Is used to adjust best picture quality. It adjusts the sampling phase
across one pixel time. When the phase is not adjusted properly, the
picture will be unclear. Therefore this value should be carefully
adjusted.
Note: improper adjustment will cause image failure.
Default :
Sets monitor to the original factory setting.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Setup
Volume :
Controls built-in speakers’ output volumes
Mute
:
To disable the audio function. To enable, press MUTE again.
Sets AUDIO settings to the original factory setting.
Default :
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP Setup
Multi-Mode :
Sub Source :
This function allows the PIP mode to be selected.
The function allows the PIP Sub source to be selected.
The selection of PIP window size.
Sub Window Size:
Sub Window H-Position : Control the PIP window position in horizontal position.
Sub Window V-Position : Control the PIP window position in vertical position.
Switching :
Enable PIP sources switching.
Control PIP source switching time.
Select PIP mode audio source.
Detect PIP mode signal.
Switching Time :
Audio Source:
Auto Close :
* PIP Hotkey: Auto + Menu
16
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD monitor Mounting Guide
Desktop
Arm Mount (VESA Standard)
When adjusting the VESA Standard Arms to
the back side of the LCD monitor, please use
the 4x8(mm) screw.
Adjust the viewing angle of LCD to fit most
comfortable monitoring status.
For further information’s please refer to the
Arm Manual.
15°
45°
Mounting the monitor on the rack
Rack Mount
Note:
When adjusting to a rack, you will need to use an optional rack mount to the back side of the LCD
monitor.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem
and some solution.
Symptom
Solution
Monitor will not turn on
No picture, no sound
No sound, picture OK
● Make sure the power cord is plugged in, then press POWER button.
● Check cable connections.
● Check audio Cable Connections
● Try pressing Volume up button in the Menu.
● Check cable connections
Poor color, sound OK
Poor color or no color
● Adjust Video set up menu.
● Adjust Color and / or TINT (NTSC only)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Color Monitor Specification
Model Number
Panel Size
VM-HT19LCD
19.0”
Aspect Ratio
5:4
640 x 480
@ 60/72/75
800 x 600
@ 56/60/72/75
1024 x 768
Resolution / Scan
@ 60/70/75
1280 x 1024
@ 60/75
Brightness
270cd/m2 (∗1)
Left 80°/ Right 80° / Up 75° / Down 60°
8ms(Typ)
Viewing Angle(H/V)
Response Time
Sync. Format
NTSC / PAL
Frequency (Horizontal)
Frequency (Vertical)
PC: 31.5K - 80KHz, Video 15750 / 15625Hz (NTSC / PAL) (∗2)
PC: 56Hz -75Hz, Video: 50 / 60Hz (∗2)
Video Interface
D-SUB 15IN x 1, Video In x 2 (BNC), Video Out x 2 (BNC), S-Video In x 1
Input
Audio Interface
Input Power
Termination
Audio In x 2, Audio Out x 2, PC-Audio In x 1
AC In x 1
Interfaces
75ohm (Auto Termination)
Yes (2pcs)
Built-in Speakers
Front Panel Button
OSD Language
VESA Mounting
Weight (N.W./G.W.)
External Dimensions
(WxHxD)
Power, Source, Up, Down, Menu, Auto
Multi Language
VESA 100
6.3kg / 7.7kg
425x396x75.6 mm
Safety & EMI
UL, CUL, FCC, CE
AC 100-240V 50/60Hz
45W
Power
Power Consumption (max)
Temp (Oper.)
-10°C to 50°C (14°F ~122°F)
20% ~ 80%
Humidity
Accessories
Power cord, User Manual
(∗1) The brightness spec. Is from panel spec.
Design and Specifications are subject to change without notice.
(∗2) It is not guaranteed for all the specified range.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Color Monitor Dimensions
VM-HT19LCD
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|