Thank you for purchasing our product
.
Please read this User’s Manual before
using the product
without notice.
.
Changes may be made
M17LCBVH3 M19LCBVH3
LCD MONITOR
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUNTING
CLEANING
● Place the monitor on a secure table or have it properly mounted to the wall.
Do not hang anything on the monitor.
Caution: The wall mount must bear a minimum of five times the monitor’s net
weight without causing damage. To mount your monitor to the wall,
you will need to remove the base before attaching the wall mount.
● Unplug the unit from the wall outlet before cleaning.
● Do not use liquid or aerosol cleaners. Use a dry soft lint-free cloth for
cleaning. If the dust is persistent, wipe with a slightly damp cloth.
SERVICE
A. Place the monitor face down on a surface that is soft, yet strong enough
to hold the monitor.
● Use only the power source and connections appropriate for the monitor as
indicated on the marking label.
● If the power cord or plug is damaged, liquid has been spilled, objects
have fallen into the apparatus, apparatus has been exposed to rain or
moisture, does not operate manually, or has been dropped, the product
needs servicing.
B. Use a screwdriver to remove the screws from the four holes on each side
of the bottom of the monitor’s base (only use with base)
C. Make sure all cables are already connected to the monitor.
D. Follow the directions included with the wall mount to mount the monitor
to the wall.
INACTIVE
● Unplug the monitor when unused for long periods of time.
VENTILATION
● Never cover or block the ventilation slits in the monitor. Ventilation slits
are provided to prevent the temperature from rising. A minimum distance
of at least 10 cm should be maintained around the unit for sufficient
ventilation.
● Never insert any foreign object, metal or liquid into the ventilation slits, as
this could result in fire or electric shock.
● Do not install the DVR or other equipment too close to the monitor.
Keep equipment at least 30 cm away from the monitor.
WATER AND MOISTURE
● The monitor should not be exposed to dripping or splashing. No
objects filled with liquids should be placed on the monitor.
● Do not use the monitor near water.
● Do not touch the monitor or cable with wet hands as this may cause
electric shock or damage.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
2. Connection under various signal input mode
1. Rear interface
（Ⅰ）Connecting with PC, DVR at VGA
This connection allows you to connect to a PC or DVR. Connect one end
of a 15-pin monitor cable to the VGA VIDEO jack on the monitor and the
other end to the PC or the DVR's video output jack. Note, if your PC's
video output isn't 15-pin, you'll need an adapter that can connect to a 15-
pin monitor cable.
Connect your audio cable.
Explanation of connectors
Connect a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8"
stereo mini pin) to the PC AUDIO jack on the back of the monitor and the
other end to the Audio Output jack on the PC or DVR.
Viewing the PC or DVR
1. Plug in the monitor and the PC, if they aren't already plugged in.
2. Turn on the monitor and the PC.
3. Repeatedly press the SOURCE button to switch the display channel
until you see VGA displayed at the top of the monitor's screen. To go
back to viewing AV video, press the SOURCE button to enter AV mode.
This section describes the jacks on the back panel of your monitor. There
are several ways to connect devices.
DC12V: Use only the power supply included with the monitor
HDMI: (High-Definition Multimedia Interface) This is an external interface for
transmitting digital audio and video data.
VGA: Connect your computer, or other device with a VGA output, to this jack
using a 15 pin D-sub cable.
（Ⅱ）Connecting the Device with Video
This connection allows you to connect a device that has a Video Output,
like, a camera or DVR etc.
Note: If the device you're connecting also has Component Video jack and
you have component video cables, we recommend you use the
Component Video (Advanced) Connection instead.
PC AUDIO IN: (Stereo mini jack) Use to obtain sound when a PC is
connected to the VGA jack. Use a 3.5 mm stereo mini pin cable
(sometimes referred to as 1/8” stereo mini pin) to connect a PC to your
monitor.
VIDEO INPUT (AV1/AV2 IN): Lets you connect a device that has composite
video jacks, such as a DVR or Camera
Connect your video cable (BNC).
Connect a video cable to the BNC INPUT jack on the back of the monitor.
VIDEO OUTPUT (AV OUT): Composite video loop though (to another
monitor or recorder)
Connect your red and white audio cables.
Connect the audio (red and white) cables to the AUDIO INPUT R and L
jacks on the back of the monitor and to the Audio Output jacks on the DVR.
AUDIO L and R: AV audio interface. The left audio connector is usually
white. The right audio connector is usually red.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Viewing the Picture From the Connected Device
1. Plug in the monitor and the device if they aren't already plugged in.
2. Turn on the monitor and the device you want to view, for example a
camera.
Front Controls
(a) 5 Key Series
3. Repeatedly press the SOURCE button until you see AV displayed at
the top of the monitor's screen.
Note: If the picture from the DVR is blue and your device is connected to
the VIDEO Input, you might be tuned to the wrong input. Make sure you
press Source until you see AV displayed at the top of the monitor's screen.
SOURCE MENU
-
+
POWER
1. POWER: Turn the monitor on or off.
2. SOURCE: Press this button to switch between input modes AV, HDMI ,
and VGA. On-screen OSD mode, press this button (move up or down)
to select a sub menu.
3. Connecting the Monitor Cables to your Computer
Make sure all cable connections are fastened -- tighten all cable screws.
Shaking and vibration may dislodge cables that are improperly connected.
Route all wiring and cabling away from heat sources and sharp metal
edges to avoid damage.
3. MENU：Press to view the On-screen OSD of the unit. Sub-menus,
features, and settings differ according to input mode on the on-screen
display, press this button to exit from main menu, sub-menus, features
and settings.
4. ＋ and －: Press ＋ button to Increase or － button to decrease volume
4. Testing the Monitor
After connecting, turn on the power switch located at the rear (or side) of
the bezel. Before you test your monitor, make sure all cables are connected
properly and routed through the cable management system. Be sure to
tighten all cable screws. To test that the monitor is working properly:
1. Turn on your pc or DVR.
2. Make sure the video image is displayed. If it is not, turn on your monitor.
Ensure the LED indicator is blue – red indicates power but no signal.
3. Make sure the video image is centered within the screen area. Use the
monitor controls to adjust the image, if necessary. Perform an Auto
Configuration first, then if you wish you can adjust the horizontal and
vertical position, contrast, and brightness to better suit your video card and
your personal preferences. Refer to Basic OSD setup for more information
on using the on-screen menu to adjust the video display.
from 1-100，on-screen OSD , press ＋ or －to adjust the settings.
5. Remote indicator: red when standby mode and blue when on display.
(b) Choose the input source
If you want to use an external input source, before to select the source, you
need to connect the devices, otherwise when you select the source, the
none or no signal will appear on the screen. Press the source button on the
monitor or remote control and the menu will appear on the screen. Then
press source to select the monitor item and press“ +/- ” to save it.
VGA: The input source from VGA terminal output.
HDMI: The input source from HDMI terminal output.
AV: The input source from AV or video camera terminal output.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MenuSetup
LANGUAGE: Lets you select your
preferred language for the menus:
(English, Chinese, German, French,
Spanish, Italian, Portuguese, and
Russian)
H-POSITION: Adjust the OSD image
horizontally by pressing the + or – buttons.
V-POSITION: Adjust the OSD image
9
BASIC ON-SCREEN DISPLAY SETUP
(1) Press the MENU button to see the menu.
(2) Press ＋ or － to select the menu item and press SOURCE button to
select the Sub menu.
OSD
vertically by pressing the ＋ or － buttons.
DURATION: 5-60
HALFTONE: 0-100
(3) Press ＋ or － to adjust the settings.
(4) Press the MENU button to return to the previous menu.
BACKLIGHT: HIGH MID LOW
1. VGA Input Mode
MEMORY RECALL: Pressing the + or －
buttons will be reset all settings to the
factory default settings.
PICTURE
CONTRAST: Adjusts the difference
between the light and dark areas of the
picture. (Adjustment range:0-100)
SLEEP-TIMER: Adjusts the amount of
time until the screen goes to sleep. (OFF,
15min, 30min, 45min, 60min)
BRIGHTNESS: Adjusts the brightness of
the picture. (Adjustment range:0-100)
DLC: ON / OFF
COLOR TEMP: Press + or － button to
go into the Color Temp sub menu. Press
the “+” button to change the color intensity
of the temperature selected (Normal,
FUNCTION
NOISE REDUCTION:
Function unavailable
Color Temp.
Warm, Cool, S-RGB, User)
HSTART、HSIZE、VSTART、VSIZE:
Function unavailable
USER : USER-R: 0~255
USER-G: 0~255
USER-B: 0~255
11
10
Download from Www.Somanuals.com. All Manuals Search And Download.
H-POSITION: Moves the image on screen
either left (－) or right (＋).
2. AV Input Mode
PICTURE
CONTRAST: Adjusts the difference
between the light and dark areas of the
picture.
BRIGHTNESS: Adjusts the brightness of
the picture.
HUE: -50 to +50 (only available on AV
PAL)
SATURATION: 0-100
V-POSITION: Moves the image on screen
either up (＋) or down (－).
CLOCK: If the clock is not fine-tuned, you
may observe periodic vertical bars of
video noise on your image. These bars of
noise are usually adjusted out when an
Auto Configuration is performed. If the
bars of noise are still present, this setting
can be adjusted manually.
PHASE: Adjusts the signal phase to
improve sharpness when the image is
fuzzy.
GEOETRY
SHARPNESS: 0-100
COLOR TEMP: Press the “+” button to
change the color intensity of the
temperature selected (Normal, Warm,
Cool, S-RGB, User)
SCALE: Full, Normal, or Center
PICTURE MODE: User, Standard, Soft, or
Vivid
AUTO ADJUST: Performs automatic
configuration of the Phase, Clock, vertical,
and horizontal position settings.
LANGUAGE: Lets you select your
preferred language for the menus:
(English, Chinese, German, French,
Spanish, Italian, Portuguese, or Russian)
OSD H-POSITION: Adjust the OSD image
horizontally by pressing the + or – buttons.
OSD V-POSITION: Adjust the OSD image
vertically by pressing the + or – buttons.
DURATION: 5-60
BASS: Adjustment range:0-100
TREBLE: Adjustment range:0-100
BALANCE: Adjusts how much audio is
sent to the left and right (-50 to +50).
The intermediate value is 0. When
indication value of balance increases
toward +50, the volume of the right and
left speaker increase and decrease. When
the indication value of balance decreases
toward -50 the volume of the right and left
speaker increase and decrease.
SOUND MODE: Provides special
processing through your speakers
(depending on the setting you chose as
your Sound Type). The available audio
modes are: Standard, User, Movie, Music)
AVC: (Automatic Volume Control)
ON & OFF
AUDIO
OSD
HALFTONE: 0-100
BACKLIGHT: HIGH MID LOW
MEM-RECALL: Pressing the + key will be
reset all settings to the factory default
settings.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3. HDMI Input mode
PICTURE
SLEEP-TIMER: Lets you set the monitor to
turn off after a given amount of time (OFF,
15min, 30min, 45min, 60min)
CONTRAST: Adjusts the difference
between the light and dark areas of the
picture.
BRIGHTNESS: Adjusts the brightness of
the picture.
FUNCTION
DLC: ON / OFF
HUE: -50 to +50 (only available on AV
PAL)
NOISE REDUCTION:（OFF、 LOW 、
SATURATION: 0-100
SHARPNESS: 0-100
HIGH）
COLOR TEMP: Press the “+” button to
change the color intensity of the
temperature selected (Normal, Warm,
Cool, S-RGB, User)
SCALE: Full, Normal, or Center
PICTURE MODE: User, Standard, Soft, or
Vivid
HSTART、HSIZE、VSTART、VSIZE:
Only available under AV Mode.
Adjust the OSD image horizontally or
vertically by pressing the “-“/ “+” button.
BASS: Adjustment range:0-100
TREBLE: Adjustment range:0-100
BALANCE: Adjusts how much audio is
sent to the left and right (-50 to +50).
The intermediate value is 0. When
indication value of balance increases
toward +50, the volume of the right and left
speaker increase and decrease. When the
indication value of balance decreases
toward -50 the volume of the right and left
speaker increase and decrease.
SOUND MODE: Provides special
processing through your speakers
(depending on the setting you chose as
your Sound Type). The available audio
modes are: User, Standard, Movie, and
Music.
LANGUAGE: Lets you select your
preferred language for the menus:
(English, Chinese, German, French,
Italian, Spanish, Portuguese, or Russian)
OSD
H-POSITION: Adjust the OSD image
horizontally by pressing the + or – buttons.
AUDIO
V-POSITION: Adjust the OSD image
vertically by pressing the + or – buttons.
DURATION: 5-60
HALFTONE: 0-100
BACKLIGHT: HIGH MID LOW
MEM-RECALL: Pressing the + or – key
will reset all settings back to the factory
default settings.
AVC: (Automatic Volume Control)
ON & OFF
15
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SLEEP-TIMER: Lets you set the monitor
to turn off after a given amount of time
(OFF, 15min, 30min, 45min, 60min)
BASS: Adjustment range:0-100
TREBLE: Adjustment range:0-1
BALANCE: Adjusts how much audio is
sent to the left and right (-50 to +50).
The intermediate value is 0. When
indication value of balance increases
toward +50, the volume of the right and left
speaker increase and decrease. When the
indication value of balance decreases
toward -50 the volume of the right and left
speaker increase and decrease.
SOUND MODE: Provides special
processing through your speakers
(depending on the setting you chose as
your Sound Type). The available audio
modes are: User, Standard, Movie, and
Music.
FUNCTION
DLC: ON / OFF
AUDIO
NOISE REDUCTION:
Function unavailable
HSTART、HSIZE、VSTART、VSIZE:
Function unavailable
AVC: (Automatic Volume Control)
ON & OFF
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Audio Inputs
Auto Adjustment
Wall Hanging
VESA Size
Stand
Stereo PC / Audio R and L
Model
M17LCBVH3
M19LCBVH3
Yes
VESA Standard
100 x 100 mm
Size
17 inch
19 inch
Aspect Ratio
Resolution (H x V)
Colors
4:3
Yes (Plastic)
1280 x 1024
16.7M
Bezel
Plastic
English, Spanish, French, German,
Portuguese, Russian, Italian, and Simplified
Chinese
OSD Language
Viewing Angle
Viewing Lines
Contrast Ratio
H: 170º V: 160º
500 TV Lines
Power
Consumption
<30W
<30W
800:1
6ms
Power Supply
OSD Control
DC12V / 3A
Yes
Response Time
3D Comb Filter
with De-interlace
3D Noise
Reduction
Brightness
2D
3D
Power Cord, Adapter, User’s Guide, and
Accessories
Audio Cable
Packaging (mm3)
(L x D x W)
450 x 150 x 450
480 x 165 x 500
270 cd/m2
Packaging (inch3)
(L x D x W)
17 3/4 x 6 x 17 3/4
18 7/8 x 6 1/2 x 19 11/16
Speakers
2 each (2.5 watts)
4.9 Kg
10.8 lb
5.5 Kg
12.1 lb
Composite
Inputs / Outputs
Weight (Kg / lb)
BNC x 1 / BNC x 1
Operating Temp
Safety
0 oC - 50 oC / 32o F - 122o F
VGA
VGA x 1
Energy Star, FCC-DOC, CE, RoHS
HDMI
HDMI x 1
19
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Cameras
5 Years
Monitors & IR LEDs
1 Year
3 Years
2 Years
PRODUCT WARRANTIES AND INFORMATION
EFFECTIVE JULY 8, 2008
DVRs / EZVR Series VDRs
PCPro/ PCL Series DVRs
Indoor Speakers
Outdoor/Weatherproof Speakers
Amplifiers
Lifetime
5 Years
5 Years
POLICY, TERMS AND CONDITIONS OF SALE
This statement of policy is in lieu of any other policy, expressed or implied, and no
representative or person is authorized to assume for us any other liability or policy without
our written consent. We cannot be held responsible for typographical errors.
PA Horns, Microphones,
Volume Controls
2 Years
Megaphones,
Speaker Distribution Centers
and Speaker Selectors
TERMS OF PAYMENT
1 Year
2%, 10 days, net 30 from invoice date of merchandise for qualified accounts or
Visa/MasterCard/Amex net at time of order placement only, other payment discounts do not
apply ($300 credit card minimum). We reserve the right to charge 1-1/2% interest per
month on past due balances. New orders will not be shipped while there is a past due
balance. We will also ship net C.O.D. or C.I.A.
Electrical Equipment Not Listed
Above & Balance of Line
90 Days
PRICING POLICY
We warranty all products to be free from any manufacturing or material defects. This
warranty will not extend to any products which have been subjected to misuse, neglect,
accident, or improper installation, used in violation of instructions furnished by us; or to units
which have been repaired or altered outside of the factory. This limited warranty does not apply
to broken cases, batteries, or other physically damaged parts. Upon request by the customer,
the company will at the customer's expense repackage merchandise in new cartons, replace
missing accessories, and return in resalable condition. Unless requested, the company will
replace and return all merchandise in the packaging in which it was received. This warranty is in
lieu of all expressed warranties, expressed or implied, and of all obligations or liability
on our part, and we neither assume nor authorize any representative or other person to
assume for us any obligation or liability. In no event shall we be liable for incidental or
consequential damages arising from the use of the product, or for any delay in the use of this
product do to causes beyond our control. Some states do not allow limitations of how long an
implied warranty lasts and/or do not allow the exclusion or limitation of consequential damages.
The above limitations on implied warranty and consequential damages may not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state
to state. See actual warranty statement included with product for limitations and exclusions
where applicable.
This price sheet reflects current published price. All prices are subject to change without
notice. All items will be billed at current prices.
CREDIT
Companies that have not established credit with our company should allow a sufficient
period of time for credit approval. Please be sure to provide complete credit information,
bank and trade references, plus financial statements, if available with your first order. To
expedite first shipment, a certified or bank check with the order or use of
Visa/MasterCard/Amex will avoid delays, while we are checking credit and waiting for bank
clearance.
FREIGHT POLICY
All shipments are F.O.B. our New York warehouse. All orders totaling $2000 or more will
be shipped freight allowed to any point in zones 1,2,3,4,5 and 1/2 freight allowed in zones
6,7,8, providing invoice is paid within 30 days from receipt of merchandise, catalogs or
exceptions from regular pricing. All UPS and USPS shipments will be insured with insurance
fee plus shipping and handling charges added to the invoice.
MINIMUM OPENING ORDER $1500
We reserve the right to refuse reorders under $250. PLEASE REQUEST CONFIRMATION
OF ALL FAXED PURCHASE ORDERS.
RETURNS
A written return authorization must be obtained prior to shipment. Label(s) must appear on
all packages and return must be ship prepaid. Defective in-warranty products will be
returned prepaid. Defective out-of-warranty products will be repaired at a nominal charge
for parts and labor and returned with shipping charges added to the invoice. If you require
an estimate before repair, please request.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
RETURNED GOODS POLICY
1
. RETURNS SENT WITHOUT PRIOR APPROVAL WILL NOT BE ACCEPTED. CREDIT WILL
BE ISSUED UPON INSPECTION OF RETURNED UNITS.
2
3
. No discounted item may be returned for credit or exchange.
. An order of $3.00 for every $1.00 to be returned must accompany a request for return for
stock adjustment.
4
5
. There will be a minimum charge of 15% for handling and repacking where necessary.
Merchandise returned for credit or exchange with missing or damaged packaging or
accessories will be charged accordingly. Merchandise returned for repair will be shipped back
repaired but in the same physical condition as when received by us. If repacking or
refurbishing is requested, where possible, you will be charged accordingly.
. If a credit is issued, current best quantity price or price when purchased, whichever is lower,
will prevail.
BACK ORDERS
Products not immediately available for shipment will be back ordered and shipped as soon as
available, unless we are advised to cancel back orders. The original order will determine basis of
shipment. If the original order is freight allowed, back orders will be freight allowed. If the original
order does not qualify for freight allowance, back orders will be shipped freight collect or shipping
and handling charges added to the invoice.
PROMOTIONAL MATERIAL
Requests for nominal amounts of catalogs, brochures, promotional sheets, etc. will be supplied at no
charge. Requests for bulk quantities of promotional materials will be billed on a cooperative 50-50 basis.
200 New Highway
Amityville, NY 11701
631-957-8700
CLAIMS
Claims for shortage must be presented within thirty days of date of invoice. Freight damage claims
and freight shortages should be filed directly with the carrier within seven days of receipt of
shipment. No liability will be accepted for damages directly or indirectly caused from the use of our
products or from any other cause. Our liability shall be limited to the repair and/or replacement of
our products, at our option of found to be defective.
NOTE: All units priced and packaged individually unless specified. Not responsible for printer
1 800 645 5516
errors.
We now accept Visa/MasterCard/AMEX at time of order placement. (See terms of Payment & Credit Terms)
For more information contact us at: Speco Technologies 200 New Highway •
P.O. Box 726 • Amityville, N.Y. 11701-0726
Tel. 631-957-8700 Outside Metro N.Y. 1-800-645-5516 • Fax 631-957-9142 or 631-957-
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
|