High End Residential
In-Ground Basketball System
Owners Manual
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
Adult Assembly Required.
This manual, accompanied by sales receipt, should be saved and kept on hand as a convenient reference, as it contains
important information about your model.
Write Model Number
From Box Here:
WARNING!
READ AND UNDERSTAND OPERATOR'S
MANUAL BEFORE USING THIS UNIT.
FAILURE TO FOLLOW OPERATING
INSTRUCTIONS COULD RESULT IN
INJURY OR DAMAGE TO PROPERTY.
Toll-Free Customer Service Number for U.S: 1-800-334-9111
08/06
ID# M88604C1
1
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
Item Qty. Part No.
Description
1
2
3
1
1
1
968880
908266
Pole
Tube, Ground Anchor, Black
Rim Assembly
4
1
Net
5
6
7
8
4
4
4
1
1
3
1
1
1
1
1
1
1
1
26
1
16
9*
2
9
8
1
4*
2*
4
2
1
1
2*
4
205702
203300
205700
204922
204923
204993
516000
204940
Nut, Hex, 3/8-16
Washer, Locking, 3/8
Bolt, Hex, 3/8-16 x 3.5” Long
Pin, Hitch
Pin, Cotter, #8
Rebar, .5” diameter, 18” Long
Label, Height Adjustment
Screw Jack
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
ID# 516000 06/05
11
Backboard
80854501
204921
Rod, Threaded Assembly, 5/8-11 x 19.8”, Zinc
Washer, Barrel
Cover, Rim
978881
988881
204670A
202900
202651
206340
220048
200704
265575
215008
203309
224728
204733
204735
204741
204742
206311
205830
Yoke, Upper, Center, Pole
Yoke, Lower, Center, Pole
Bushing, Plastic
Bolt, Hex, 1/2-13 x 5, Zinc
Washer, Flat, 0.053” I.D., 1.08” O.D., Zinc
Nut, Lock, Nylon Insert, 1/2-13, Zinc
Bolt, Hex Head, 1/2”-13 x 6”, Zinc
Washer, Flat, 0.656” I.D., 1.313” O.D., Zinc
Nut, Hex, 5/8-11, Zinc
Nut, Hex, 5/8-11, Grade 8, Black
Washer, Flat, 3/8”
Bolt, Hex, 1/2-13 x 9.25, Black Zinc
Screw, #8, .50 Long
Height Indicator, Plastic
Label, Height Indicator, Right
Label, Height Indicator, Left
Spacer, .52 I.D. x .75 I.D. x .5” Long, Plastic
Bolt, Hex, 1/2-13 x 2.5, Zinc
* You May Have Extra Parts With This Model.
08/06
ID# M88604C1
3
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFIER (BOLTS & SCREWS)
Item #23 (2)
Item #20 (1)
Item #29 (4)
Item #7 (4)
Item #28 (2)*
Item #34 (4)
HARDWARE IDENTIFIER (NUTS, WASHERS & SPACERS)
Item #33 (2)*
Item #6 (4)
Item #27 (4)*
Item #21 (16)
Item #24 (9)
Item #5 (4)
Item #22 (9)*
Item #25 (4)
Item #26 (1)
HARDWARE IDENTIFIER (OTHER-NOT ACTUAL SIZE)
Item #9 (1)
Item #15 (1)
Item #19 (26)
Item #8 (1)
ID# M88604C1
08/06
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Ensure ground is level with playing surface, then dig pole hole.
1.
24" (61 cm)
48" (121.9 cm)
WARNING!
24" (61 cm)
GROUND SURFACE
PLAYING SURFACE
48" (121.9 cm)
CONTACT UTILITIES
BEFORE DIGGING.
Install nuts (25) onto the ground tube bolts as shown.
2.
25
NOTE:
Nuts on the top of the plate are used
for leveling the pole after system is
fully assembled.
2
08/06
ID# M88604C1
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Fill hole with concrete. Tamp down concrete to release air pockets
and build drainage hill.
3.
DRAINAGE HILL
1" (2.54 cm)
PLAYING SURFACE
SIDE VIEW
4.
Insert rebar (10) through holes in ground tube assembly (2) as shown.
2
10
10
10
ID# M88604C1
08/06
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert ground tube assembly (2) into cement as shown. Move assembly around to release any air
pockets in cement, then rest mounting plate on cement drainage hill. Apply some pressure to level
mounting plate on top of drainage hill. Level mounting plate and square with playing surface. Clean off
any excess cement on mounting plate at this time and place washers (24) on mounting bolts (19).
5.
2
10
IMPORTANT!
NOTE ORIENTATION
10
Front of mounting
plate (2) must be
parallel with playing
10
surface.
24
24
24
PLAYING SURFACE
24
PLAYING SURFACE
IMPORTANT!
Check leveling of mounting plate
several times with carpenter’s level
while concrete is curing.
IMPORTANT!: WAIT A MINIMUM OF 72 HOURS BEFORE GOING ON
TO NEXT STEP. CONCRETE MUST CURE. ALLOW ADDITIONAL TIME
FOR COLD, WET OR HUMID WEATHER.
08/06
ID# M88604C1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert bushings (19) into areas shown.
6.
13
19
19
19
19
19
19
19
19
19
19
19
19
19
19
1
17
19
19
19
19
18
19
19
19
ID# M88604C1
08/06
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rest top of pole on a piece of scrap wood (not included) and line up holes in pole (1) to holes in
mounting plate (2) as shown.
7A.
1
WARNING!
PLAYING SURFACE
THREE CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING
COULD RESULT IN
SCRAP WOOD
(NOT INCLUDED)
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
1
2
PLAYING SURFACE
Insert bolt (23) through holes in plate and pole and secure with nut (22).
7B.
1
23
22
08/06
ID# M88604C1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
8.
WARNING!
TWO people are required to lift pole into
position so that the threaded assembly
rod (14) can be installed and secured by
the THIRD person.
While pole is being supported by TWO
capable adults, position rod (14) and lock
into place with hitch pin (8) and cotter pin
(9).
THREE CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING
COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
Slide barrel washer (15) onto other end of
rod (14) and secure with washer (24) and
nut (26). Tighten nut (26) until it is
positioned at 3-3/4” from the end of the
rod (14) as shown (Figure A)
Completed Assembly
26
24
15
1
1
14
9
8
26
FIGURE
A.
14
ID# M88604C1
08/06
10
Download from Www.Somanuals.com. All Manuals Search And Download.
9.
While still in forward position, attach both upper
and lower yokes (17 & 18) to pole as shown.
WARNING!
THREE CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING
COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
22
21
17
18
21
28
08/06
ID# M88604C1
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach elevator adjustment (12) to
lower yoke (18).
10.
WARNING!
THREE CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING
COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
22
21
18
19
12
19
21
20
ID# M88604C1
08/06
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach elevator adjustment (12) to pole bracket.
11.
WARNING!
THREE CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING
COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
21
21
23
22
33
33
12
08/06
ID# M88604C1
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach backboard (13) to upper and lower
yokes (18 & 17).
12.
A.
Then, hinge board to match up with holes in
lower yoke (18), FIG. C, and secure with
hardware as shown in FIG. D.
B.
First attach board (13) to upper yoke (17),
using TWO people to hold the board and
ONE person to attach hardware (FIG. A).
Use hardware as shown in FIG. B.
WARNING!
THREE CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING
COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
FIG. A
FIG. C
FIG. D
13
FIG. B
13
21
21
21
21
34
34
22
22
21
21
21
21
34
34
22
22
17
17
18
18
ID# M88604C1
08/06
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before starting rim assembly, tighten nut (26) until it is positioned 6-3/4” from
the end of the rod as shown (Figure A).
13.
Remove rim cover (16), attach rim assembly (3) to backboard (13) and
reattach rim cover (16).
** For rim assembly, see instructions included with rim.
IMPORTANT!
Carefully cut and peel
protective film away from
board prior to attaching rim.
14
26
FIGURE
A.
5
6
13
Rim Assembly
16
3
Refer To Instructions
Included With Rim
Hardware For Rim
Assembly.
27
27
7
7
08/06
ID# M88604C1
15
Download from Www.Somanuals.com. All Manuals Search And Download.
14.
A.
Set-up For Left Side
Set-up For Right Side
Apply height indicator
labels (32 & 31) to height
indicators (30).
30
30
10
10
9
9
7
8 7
8
31
10
32
10
7
9
8
9
8 7
Attach height indicators to lower yoke in area shown by turning
screws (29) into place with a phillips-head screwdriver.
B.
IMPORTANT!
10
29
9
8
7
NOTE ORIENTATION
OF HEIGHT
INDICATORS:
10’ MARK SHOULD
FACE AWAY FROM
BACKBOARD.
Attach height indicators
to lower yoke in area
shown by turning
screws (29) into place
with a phillips-head
screwdriver.
C.
10
9
8
7
29
Install net (4) to rim as shown.
15.
1.
2.
4.
3.
ID# M88604C1
08/06
16
Download from Www.Somanuals.com. All Manuals Search And Download.
16.
Upright pole (1) by tightening nut (26).
Using 15/16” wrench, turn nut (26) clockwise to
begin standing pole upright. Continue to turn nut (26)
until pole has come to rest against washers (24) and
pole is vertical.
WARNING!
THREE CAPABLE ADULTS REQUIRED FOR THIS
PROCEDURE. TWO PEOPLE ARE REQUIRED TO
GUIDE AND SUPPORT THE SYSTEM WHILE THE
THIRD PERSON IS TIGHTENING NUT (26) TO
RAISE THE SYSTEM UPRIGHT.
Once pole is in its final position, install washers (24)
and nuts (25) onto bolts (19) and fully tighten to
secure pole to anchor plate.
FAILURE TO FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
1
WARNING!
NING
T
R
RESUL
GE.
Y
MA
DAMA
WA
ARNINGSTY
W
OPER
w
T
H
E
S
E
P
R
W
follo
and
FOLLO
Y
AND/OR
w
TO
kno
er
s
system.
y
F
AILURE
IN
a
l
l
p
l
a
o
f
t
h
e
SERIOUS INJUR that
ensure
e
operation
pr
for
or
saf
must
for
installation.system
Owner
rules
oper
o
f
t
h
e
t
these
ual
a
n
y
p
a
r
o
r
n
e
t
.
t
y
p
e
man
d
,
r
i
m
rim
braces
dunk
kboar in
orming
bac
the
d,
t
i
n
s
t
r
u
c
t
i
o
n
o
n
suppor
See
DO
HANG
perf
om the
if
come
•
•
T
fr
NO
kboar
y
w
h
e
n
w
a
y
bac
a
teeth/face
e
s
p
e
c
i
a
l
l
face
l
u
d
i
n
g
y
,
occur
inc
During
pla
keep
activities,Serious
y
er's
pla
injur
y
fr
om
y
couldor
net.
.
awa
•
rim
on
pole
fing
and
er
s
d,
y
p
l
a
kboar
bac
limb,
o
r
net.
and
with
shake
hands
,
c
keep
system.
adjust
hes,
watc
c
o
n
t
a
c
t
s
l
i
d
e
height,
not
or
y
•
•
Do
adjusting
ts.
move
jewelr
,
litter
to
(
r
i
n
g
s
,
in
base
n
e
t
.
W
h
e
n
p
a
r
.
Grass,
ving
not
w
c
hildren
entangle
pole
mo
Do
allo
pla
wear
y
not
ma
do
om
y
,
fr
pitting,
(rust,
deterioration.
If
paint.
osion
•
•
objects
y
awa
or
During
klaces,
ganic
etc.);
and
of
materialosion
corr
e
n
a
m
e
l
nec
eep
,
r
e
p
l
a
c
e
or
signs
xterior
c
a
u
s
e
c
o
r
f
r
or
with
e
an
ywhere
•
•
K
with
c
o
u
l
d
s
y
s
t
e
m
steel
loose
etc.
Chec
k
pole
r
e
p
a
i
n
t
o
u
g
h
t
h
e
b
a
l
l
a
s
t
,
r
e
p
a
i
r
and
thr
oper
corr
and
pr
for
use
eac
signs
osion
c
hipping)penetrated y.
has
h
and
wear
rust
the
Chec
immediate
o
l
re
bef
.
pole
k
system
for instability
use
times.
excessive
•
,
h
eac
dware
har
bef
ore
g
u
s
i
n
g
.
b
e
f
equipment.
ore
k
ed
a
t
a
l
l
cap
s
y
s
t
e
m
d
a
m
a
with
C
h
e
c
on
•
•
•
p
l
a
y
vered
co
top
ver
N
e
p
o
l
e
K
eep
2/99
201255
1-800-558-5234
THREE CAPABLE ADULTS
REQUIRED FOR THIS
PROCEDURE. FAILURE TO
FOLLOW THIS WARNING
COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
26
1
25
24
19
24
19
E
C
YING
A
PLA
SURF
08/06
ID# M88604C1
17
Download from Www.Somanuals.com. All Manuals Search And Download.
After pole has been secured to the anchor plate (2) loosen nut (26),
remove cotter pin (9), and pull out pin (8). This will allow the removal
of the assembly rod (14) which is no longer necessary for the
remainder of the assembly and installation of system.
17.
WARNING!
ONLY AFTER THE ANCHOR
PLATE HAS BEEN FULLY
TIGHTENED: Remove cotter
pin (9) and pin (8) to remove
threaded assembly rod
(14)
from anchor plate (2).
26
24
15
14
9
8
25
ID# M88604C1
08/06
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Check system leveling. Pole (1)
should be level in all directions.
After system is leveled, completely
tighten all nuts (25).
18.
NOTE:
If adjustment is
necessary, adjust
system by rotating
the nuts (25) between
anchor plate (2) and
pole flange.
1
25
2
19.
Apply height adjust ment label (11).
Adjust system by turning crank until desired height is reached
per height indicator (30).
30
WARNING!
10 feet
(3.05 m)
12
11
READ AND UNDERSTAND
WARNING & HEIGHT
ADJUSTMENT LABELS
BEFORE USING THIS UNIT.
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO PROPERTY.
08/06
ID# M88604C1
19
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED LIFETIME WARRANTY
Subject to proper installation and normal use, Spalding®
warrants, subject to limitations below, to the original retail
purchaser all structural components of the Spalding®
system to be free of defects in material and workmanship
for the duration of ownership by the original retail
purchaser.
Merchandise must be shipped prepaid with a copy of proof
of purchase to our factory for examination to see whether
it needs to be repaired or replaced. Any labor costs,
travel expenses and any other charges involved in the
removal, installation or replacement of the
defective/repaired parts from/to your Spalding® system
will be your (the purchaser’s) responsibility. Shipping
charges for replaced or warranted merchandise being
sent back to the customer from our factory must be
prepaid by the customer in advance. If not, the
replacement shipment will be sent out collect.
What is Not Covered By This Warranty
Paint or rusted parts. Paint kits will be available to assist in
normal maintenance.
RIM
HANGING ON THE RIM WILL VOID YOUR WARRANTY.
Rims are not warranted for any defects other than
workmanship. Torn back plates, damaged springs, bent
rings, damaged eye bolts, and torn or distorted rim
supports result from hanging on the rim and are not
warranted.
ID# M88604C1
08/06
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|