User guide
®
Bluetooth Music Receiver
BM10
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory overview
1. Stereo
Insert stereo cables to connect the device to a stereo.
connectors (Left/
Right)
2. Micro USB port
Insert charger cable to power on the device.
3. Notification light Flashing blue light indicates the device is visible to other
Bluetooth® devices or is being reconnected.
Stable blue light indicates the device is connected to your
phone.
Stable white light indicates the device is ready for
reconnection.
4. Pair/Connect
button
Long press to enter pairing mode and make the device visible
to other Bluetooth® devices.
Press to disconnect from the currently connected phone.
Press to reconnect to the most recently connected phone.
3
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basics
To power on the music receiver
1
2
Plug one end of the charger cable into the charger.
Plug the other end of the cable into the Micro USB port of the music receiver.
A white notification light illuminates briefly to indicate that the device is
powered on.
The music receiver only works when connected to a power source.
To connect the music receiver to a stereo
1
2
Plug one end of the stereo cable into the relevant stereo connectors (Left/
Right) on your music receiver.
Plug the other end of the cable into the stereo.
4
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing and connecting
Before you can use your music receiver to play music through a stereo system, you
need to first pair the music receiver with your phone. You can pair the devices
manually, or you can use NFC. Once paired, the music receiver automatically
establishes a connection to your phone.
The internal memory of your music receiver can save and remember up to eight
pairings with other phones at any given time.
To manually pair the music receiver with your phone
1
2
Make sure your phone has the Bluetooth® function turned on.
Music Receiver: If you are pairing the music receiver with a phone for the first
time, the music receiver enters pairing mode automatically. If not, press and
hold the Pair/Connect button until the notification light flashes blue.
Phone: Scan for Bluetooth® devices, then select BM10 in the available
devices list.
3
4
Follow the pairing instructions that appear on your phone. If a PIN code is
required, enter "0000".
To pair the music receiver with a phone using NFC
1
2
Make sure that the phone has the NFC function turned on and that the screen
is active and unlocked.
Place the phone over the music receiver so that the NFC detection area of
each device touches the other.
5
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnecting and reconnecting
There are three ways to disconnect your phone from or reconnect it with the music
receiver:
•
•
Deselect or select BM10 in the list of paired Bluetooth® devices in your phone.
Place your phone over the music receiver so that the NFC detection area of each
device touches the other.
•
Press the Pair/Connect button.
6
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Smart Connect
You can use the Smart Connect application on your phone to automatically stream
music to the music receiver when the phone is connected with the receiver.
Setting up such an action in the Smart Connect application is known as creating an
event. For example, you could create an event that sets the music player to stream
music to the music receiver every day at a certain time, for example, while you are
taking a tea or coffee break.
Before you can create music events in Smart Connect, you must install the Smart
Connect application on your phone.
To install the Smart Connect application on your phone
1
2
From the main application menu of your phone, find and tap Play Store to
open the Google Play™ application.
Tap the search icon at the top right corner and enter "Smart Connect" in the
search field, then tap the search icon again.
Tap Smart Connect.
Tap Download, then tap Accept & Download.
Follow the instructions that appear on the screen of your phone to install the
application.
3
4
5
To create a Smart Connect event
1
Start the Smart Connection application. If you are opening Smart Connect for
the first time, tap OK to close the introduction screen.
2
3
4
5
6
Tap
.
Give the event a name, then tap Create.
Under WHEN, add either the accessory or a time interval, or both.
Under DO THIS, add what you want to happen in your phone.
Under AT THE END, add what you want to happen when you disconnect the
accessory or when the time interval comes to an end. If both these conditions
are set, the actions start either when you disconnect the accessory, or when
the time interval comes to an end.
7
To save the event, press
.
To add a Bluetooth® accessory, you have to first pair it with your phone.
7
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal information
Music Receiver BM10
This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of
current information, or improvements to programs and/or equipment, may be made by Sony Mobile
Communications AB at any time and without notice. Such changes will, however, be incorporated into new
editions of this User guide.
All rights reserved.
©Sony Mobile Communications AB, 2013
Publication number: 1277-5974.1
All product and company names mentioned herein are the trademarks or registered trademarks of their
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of
their respective owners.
All illustrations are for illustration only and may not accurately depict the actual accessory.
Declaration of Conformity for BM10
We, Sony Mobile Communications AB of
Nya Vattentornet
SE-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony type RD-0030
and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards EN 300 328:V1.7.1, EN 301 489-3:V1.4.1,
EN 301 489-7:V1.3.1, EN 301 489-17:V2.1.1 and EN 60 950-1:2006
+A11:2009+A1:2010 following the provisions of, Radio Equipment and
Telecommunication Terminal Equipment directive 1999/5/EC.
Lund, July 2013
Anders Grynge
Director, Head of Global Type Approval
We fulfil the requirements of the R&TTE Directive (1999/5/EC).
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
Any change or modification not expressly approved by Sony may void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
8
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Industry Canada Statement
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Avis d’industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et,
and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
9
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
|