HSP 2
HSP 4
Bedienungsanleitung
Instructions for use
Notice d‘emploi
Istruzioni per l‘uso
Instrucciones de uso
Gebruiksaanwijzing
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
•
•
•
•
Please read these instructions carefully and completely before
using the device.
Make these instructions easily accessible to all users at all
times.
Always include these instructions when passing the device on
to third parties.
Water entering the housing of the device can cause a short-
circuit and damage the electronics. Protect the device from
wetness. Use only a slightly damp cloth to clean the device.
•
•
Do not expose the device to extreme temperatures (normal
operating temperatures: 10 °C to 35 °C).
Use the device with care and store it in a clean, dust-free
environment.
Intended use of the device
Intended use includes:
•
•
•
having read these instructions, especially the chapter “Safety
instructions”,
using the device within the operating conditions and
limitations described in this instruction manual.
never opening the device. If devices are opened by customers
in breach of this instruction, the warranty becomes null and
void.
“Improper use” means using the device other than as described in
these instructions, or under operating conditions which differ
from those described herein.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Delivery includes
Delivery of the HSP 2/HSP 4 includes:
1
1
5
1
1
1
1
2
1
1
boom microphone
neckband
clips
silicone tube
connection cable
plastic transport case, foam-lined with cut-outs
windshield (HSP 4 only)
caps, short and long (HSP 2 only)
instruction manual
Warranty Certificate
3
Download from Www.Somanuals.com. All Manuals Search And Download.
HSP 2/HSP 4
HSP 2 and HSP 4 are high-quality condenser headmics designed
for professional “hands free” applications. Their adjustable
neckband is visually unobtrusive and very comfortable to wear.
The 24 available HSP variants differ in size, color and connector
(see “HSP 2 cable variants” on page 11 and “HSP 4 cable variants”
on page 17).
There are two pick-up patterns available:
•
•
HSP 2: omni-directional
HSP 4: cardioid
Features
•
•
Individually adjustable to all head sizes
Neckband design keeps the microphone clear from shirt-collar
or clothing
•
•
Thin microphone boom, interchangeable
Microphone boom can be attached to the left or right side
(clip)
•
•
•
Adjustable neckband for optimum adaption of the angle
Microphone boom is adjustable in length
All metal parts of the neckband and the microphone boom are
coated in a physical vapour deposition process (scratch-
resistant)
•
Modular overall system, i.e. all system components are easily
interchangeable
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the HSP 2 into operation
The HSP 2 is ready for operation on delivery. The microphone can
be worn on the left or right side of the mouth. If you do not want
to change sides, continue on page 7.
Attaching the microphone to the left or right side
The neckband has as a clip which is designed so that
the microphone boom can be worn on either side of
the mouth.
CAUTION! Damage to the microphone boom!
The microphone boom can break or be impaired in
its function when you bend or turn it in the wrong
place.
̈ Only adjust the microphone boom as described in
this chapter.
To remove the microphone boom:
̈ Open the clip on the neckband.
̈ Carefully remove the microphone boom and the neckband from
the clip.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
To reattach the microphone boom:
³
ꢀ
R
³
ꢀ
L
̈ ³ First press the microphone boom and then the neckband
into the clip as shown.
̈ ꢀ Close the clip.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the microphone boom and the neckband
For best possible comfort and optimum fit of the headmic, the
neckband and the microphone boom have to be adjusted to
properly fit your head.
CAUTION! Damage to the microphone boom!
The microphone boom can break or be impaired in
its function when you bend or turn it in the wrong
place.
̈ For adjusting the microphone boom, ONLY bend
or turn the neckband.
Positioning the microphone towards the corner of the mouth
To individually position the microphone:
̈ Bend the neckband ³ at the
clip to adjust the angle of the
microphone boom ꢀ.
̈ Push the microphone boom ꢀ
backwards or forwards in the
clip so that the microphone is
positioned at the corner of the
mouth as shown.
³
ꢀ
ꢀ
2–3 cm
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the neckband
The neckband is flexible and ensures an optimum fit.
̈ Change the length of the
neckband until a snug but
comfortable fit is achieved.
̈ If necessary, adjust the neck-
band at the earhooks.
Attaching the cable to the cable
grip
̈ Attach the microphone cable
to the cable grip in the centre
of the neckband.
Note:
When attaching the thin
cable, make sure you also
press the small cable sleeve
into the cable grip or the
cable will fall out.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Windshields for the HSP 2
The quality of outdoor recordings
and close miking can be impaired
by wind noise. An effective
attenuation of wind noise can be
obtained by using the MZW 2 and
the MZW 02 windshields.
»
To begin with, use the MZW 2
windshield » which reduces wind
noise by a maximum of 20 dB.
With the additional MZW 02 foam
windshield ꢁ you can reduce wind
noise by a further 10 dB.
ꢁ
The MZW 2 and MZW 02 are
available as accessories.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Treble boost using the frequency response caps
Your HSP 2 headmic is supplied with two different frequency
response caps. These caps allow you to adjust the microphone’s
sensitivity in the presence area (see “Frequency response curve
HSP 2” on page 24):
•
•
Short cap: MZC 2-1 (treble boost of 2 dB)
Long cap: MZC 2-2 (treble boost of 4 dB)
Use these caps if the microphone cannot be positioned close to the
mouth. The further away the microphone is from the mouth, the
less treble is picked up. In addition, you should use these caps if
the sound is too muffled or if you want to increase the speech
intelligibility.
̈ Slip the cap of your choice onto the microphone until it engages
with the second notch.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
HSP 2 cable variants
The headmics are available in two sizes. The -M variants have
smaller neckbands and shorter microphone booms.
Connection cable with 3-pin lockable special connector
Suitable for Sennheiser SK 50, SK 250, SK 5012 and SK 3063
bodypack transmitters.
HSP 2
anthracite
beige
Cat. No. 009862
Cat. No. 009863
Cat. No. 500694
Cat. No. 500690
HSP 2-3
HSP 2-M
HSP 2-3-M
anthracite
beige
Steel wire cable with 3.5 mm mini-jack
Suitable for SK 100, SK 300 and SK 500 evolution wireless series
bodypack transmitters. For wired applications, the headmic can be
used with the intelligent MZA 900 P phantom power adapter.
HSP 2-ew
anthracite
beige
Cat. No. 009866
Cat. No. 009872
Cat. No. 500693
Cat. No. 500692
HSP 2-ew-3
HSP 2-ew-M
HSP 2-ew-3-M
anthracite
beige
Steel wire cable with open ends
HSP 2-5
anthracite
Cat. No. 009868
Cat. No. 009869
Cat. No. 500691
Cat. No. 500689
HSP 2-5-3
HSP 2-5-M
HSP 2-3-5-M
beige
anthracite
beige
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the HSP 4 into operation
The HSP 4 is ready for operation on delivery. The microphone can
be worn on the left or right side of the mouth. If you do not want
to change sides, continue on page 14.
Attaching the microphone to the left or right side
The neckband has as a clip which is designed so that
the microphone boom can be worn on either side of
the mouth.
CAUTION! Damage to the microphone boom!
The microphone boom can break or be impaired in
its function when you bend or turn it.
̈ Only adjust the microphone boom as described in
this chapter.
To remove the microphone boom:
̈ Open the clip on the neckband.
̈ Carefully remove the microphone boom and the neckband from
the clip.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
To reattach the microphone boom:
ꢀ
ꢁ
R
ꢀ
ꢁ
L
̈ ꢀ First press the microphone boom and then the neckband
into the clip as shown.
̈ ꢁ Close the clip.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the microphone boom and the neckband
For best possible comfort and optimum fit of the headmic, the
neckband and the microphone boom have to be adjusted to
properly fit your head.
CAUTION! Damage to the microphone boom!
The microphone boom can break or be impaired in
its function when you bend or turn it.
̈ For adjusting the microphone boom, ONLY bend
or turn the neckband or the flexible gooseneck at
the forward part of the microphone boom.
Positioning the microphone towards the corner of the mouth
To individually position the microphone:
̈ Bend the neckband ³ at the clip
to adjust the angle of the
microphone boom ꢀ.
̈ Push the microphone boom ꢀ
backwards or forwards in the
clip so that the microphone is
positioned directly at the corner
of the mouth as shown.
³
ꢀ
̈ If necessary, precisely position
the microphone by using the
flexible gooseneck ».
»
ꢀ
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the sound inlet basket
Notes:
– Do not position the microphone directly in front of your
mouth as it will pick up your breathing and plosive noises
from your mouth. In addition, moisture can adversely affect
the sound and performance of your microphone.
– When attaching the sound
inlet basket, make sure that
it locks into place with an
audible click.
– Make sure not to cover the
sound inlet.
Adjusting the neckband
The neckband is flexible and ensures an optimum fit.
̈ Change the length of the
neckband until
a
snug but
comfortable fit is achieved.
̈ If necessary, adjust the neck-
band at the earhooks.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the cable to the cable grip
̈ Attach the microphone cable to
the cable grip in the centre of the
neckband.
Note:
When attaching the thin cable,
make sure you also press the
small cable sleeve into the cable
grip or the cable will fall out.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
HSP 4 cable variants
The headmics are available in two sizes. The -M variants have
smaller neckbands and shorter microphone booms.
Connection cable with 3-pin lockable special connector
Suitable for Sennheiser SK 50, SK 250, SK 5012 and SK 3063
bodypack transmitters.
HSP 4
anthracite
beige
Cat. No. 009864
Cat. No. 009865
Cat. No. 500700
Cat. No. 500696
HSP 4-3
HSP 4-M
HSP 4-3-M
anthracite
beige
Steel wire cable with 3.5 mm mini-jack
Suitable for SK 100, SK 300 and SK 500 evolution wireless series
bodypack transmitters. For wired applications, the headmic can be
used with the intelligent MZA 900 P phantom power adapter.
HSP 4-ew
anthracite
beige
Cat. No. 009867
Cat. No. 009873
Cat. No. 500699
Cat. No. 500698
HSP 4-ew-3
HSP 4-ew-M
HSP 4-ew-3-M
anthracite
beige
Steel wire cable with open ends
HSP 4-5
anthracite
Cat. No. 009870
Cat. No. 009871
Cat. No. 500697
Cat. No. 500695
HSP 4-5-3
HSP 4-5-M
HSP 4-3-5-M
beige
anthracite
beige
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and maintenance
CAUTION! Liquids can damage the electronics of the device!
Liquids entering the housing of the device can cause
a short-circuit and damage the electronics.
̈ Only use a soft, slightly damp cloth to clean the
device.
Cleaning the sound inlet basket (HSP 4 only)
̈ To clean or replace the sound inlet basket, carefully pull it from
the capsule.
̈ Moisten a small brush (bristle brush or toothbrush) with
isopropyl alcohol.
̈ Carefully brush off the sound
inlet basket.
̈ Allow the sound inlet basket to
air dry for approx. 1 hour so
that the remaining isopropyl
alcohol can evaporate.
̈ Reattach the sound inlet basket
to the capsule so that it locks
into place with an audible click.
When attaching the sound inlet
basket, make sure not to cover
the sound inlet.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the contacts of the connection cable
Over time, salt deposits from sweat can build up on the connector
and the socket. Clean the connector and the socket using standard
isopropyl alcohol.
To loosen the connection:
̈ Slide the silicone tube aside.
̈ Insert your fingernail into the
join.
̈ Pull the connector and the socket
apart as shown.
̈ Moisten a small brush (bristle
brush or toothbrush) with
isopropyl alcohol.
̈ Carefully brush off the connector
and the socket and remove the
salt deposits.
̈ Rinse the connector and the
socket with isopropyl alcohol to
remove the remaining salt
deposits.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
̈ Dry the connector and the socket using a soft cloth or a small
piece of cotton wool and carefully tap them off.
̈ Allow the connector and the socket to air dry for approx. 1 hour
so that the remaining isopropyl alcohol can evaporate.
̈ Slide the silicone tube onto the connector.
̈ Connect the connector to the socket.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories/spare parts
The following accessories and/or spare parts are available for the
HSP 2 / HSP 4:
Spare parts for HSP 2
Parts
Cat. No.
511711
511712
Boom microphone, omni-directional, beige
Boom microphone, omni-directional, anthracite
HSP-M boom microphone, omni-directional, anthracite 515280
HSP-M boom microphone, omni-directional, beige
MZC 2-1 cap, short, anthracite
MZC 2-2 cap, long, anthracite
MZC 2-1 cap, short, beige
515281
085842
085839
085843
085840
004743
047185
047186
076615
528165
528166
MZC 2-2 cap, long, beige
MZ 2 make-up protector
MZW 2 windshield, black
MZW 2 windshield, beige
MZW 02 foam windshield, anthracite
Set of clips for HSP 2, beige
Set of clips for HSP 2, black
Spare parts for HSP 4
Parts
Cat. No.
511713
511714
Boom microphone, cardioid, beige
Boom microphone, cardioid, anthracite
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HSP-M boom microphone, cardioid, anthracite
HSP-M boom microphone, cardioid, beige
Windshield cap, cardioid, anthracite
Windshield cap, cardioid, beige
MZW 4 foam windshield, black
MZW 4 foam windshield, beige
Set of clips for HSP 4, beige
515282
515283
511715
511716
510862
510863
528167
528168
Set of clips for HSP 4, black
Spare parts for HSP 2 and HSP 4
Parts
Cat. No.
511709
511710
515278
515279
511717
511718
511719
511720
511721
511722
511723
500226
Neckband, anthracite
Neckband, beige
HSP-M neckband, anthracite
HSP-M neckband, beige
Cable with 3-pin lockable special connector, black
Cable with 3-pin lockable special connector, beige
Steel wire cable with 3.5 mm mini-jack, black
Steel wire cable with 3.5 mm mini-jack, beige
Steel wire cable with open ends, black
Steel wire cable with open ends, beige
Plastic transport case
MZA 900 P phantom power adapter
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications HSP 2/HSP 2-M
Frequency response
Pick-up pattern
20−20,000 Hz ±3 dB
omni-directional
Nominal impedance
(at 1 kHz)
1 kΩ
Min. terminating impedance 4.7 kΩ
Sensitivity
2 mV/Pa ± 3 dB
4.8 mm
Diameter of mic capsule
Max. sound pressure level 150 dB
Equivalent noise level
Supply current
28 dB (A)
approx. 250 μA
4.5 − 15 V
–10 °C to +50 °C
1.6 m
Power supply
Operating temperature
Cable length
Diameter of boom arm
Weight HSP 2/HSP 2-M
Connector
1.1 mm
2.1 g/2.0 g
see “HSP 2 cable variants” on
page 11
Neckband
Width HSP 2/HSP 2-M
Weight HSP 2/HSP 2-M
110 mm/80 mm
4.4 g/4.0 g
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Polar diagram HSP 2
0°
0
30°
30°
5
10
15
20
25
dB
60°
60°
90°
90°
120°
120°
150°
150°
180°
2000 Hz
4000 Hz
8000 Hz
16000 Hz
125 Hz
250 Hz
500 Hz
1000 Hz
Frequency response curve HSP 2
dBv
- 35
- 40
- 45
- 50
- 55
- 60
- 65
- 70
20
50
100 200
500 1000 2000
5000 10000 20000 Hz
without cap
with MZC 2-1 cap, short
with MZC 2-2 cap, long
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications HSP 4/HSP 4-M
Frequency response
Pick-up pattern
40−20,000 Hz ±3 dB
cardioid
Nominal impedance
(at 1 kHz)
1 kΩ
Min. terminating impedance 4.7 kΩ
Sensitivity
4 mV/Pa ±3 dB
8.4 mm
Diameter of mic capsule
Max. sound pressure level 150 dB
Equivalent noise level
Supply current
37 dB (A)
approx. 250 μA
4.5 15 V
Power supply
−
Operating temperature
Cable length
–10 °C to +50 °C
1.6 m
Diameter of boom arm
Weight HSP 4/HSP 4-M
Connector
2.0 mm
4.8 g/4.0 g
see “HSP 4 cable variants” on
page 17
Neckband
Width HSP 4/HSP 4-M
Weight HSP 4/HSP 4-M
110 mm/80 mm
4.4 g/4.0 g
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Polar diagram HSP 4
0°
0
30°
30°
5
10
15
20
25
dB
60°
60°
90°
90°
120°
120°
150°
150°
180°
2000 Hz
4000 Hz
8000 Hz
16000 Hz
125 Hz
250 Hz
500 Hz
1000 Hz
Frequency response curve HSP 4
dBv
- 35
- 40
- 45
- 50
- 55
- 60
- 65
- 70
20
50
100 200
500 1000 2000
5000 10000 20000 Hz
0°, 1 cm
0°, 1 m
90°, 1 m
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer Declarations
Warranty
2 years
CE Declaration of Conformity
This equipment is in compliance with the essential requirements
and other relevant provisions of Directive 2004/108/EC. The
WEEE Declaration
Please dispose of this product at the end of its
operational lifetime by taking it to your local collection
point or recycling center for such equipment.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
Phone +49 (5130) 600 0
Printed in Germany
Publ.01/08
Fax +49 (5130) 600 300
527045/A01
Download from Www.Somanuals.com. All Manuals Search And Download.
|