BFPR100
O W N E R ’ S M A N U A L
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
• SAFETY INSTRUCTIONS ............................ PAGE 4
• PREPARATION ........................................... PAGE 5
• HARDWARE LIST ........................................ PAGE 6
• HARDWARE ILLUSTRATION............................ PAGE 7
• PART LIST/ILLUSTRATION ............................ PAGE 8
• ASSEMBLY INSTRUCTIONS ............................ PAGE 10
• EXPLODED VIEW ........................................ PAGE 18
• CONTACT PAGE ........................................ PAGE 20
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using exercise equipment, you
should always take basic precautions,
including the following:
Obtaining Service
Personal Safety During Assembly
Retain this Owner’s Manual for future
reference. If you need to order replacement
parts please be prepared to provide the
following information when contacting us so
that we can assist you better.
1. Model Number
2. Place of Purchase
3. Serial Number (S/N)
4. Part # and Description
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
Required Tools
Assembly Tips
Installation Requirements
Any Questions?
Call (800) 556-3113
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PFPR100 - HARDWARE LIST
PART#
SIZE
DESCRIPTION
QUANTITY
1
2
3
4
M10X70mm
M10X75mm
ø11Xø30X2.5mm
M10
HEX HEAD BOLT
HEX HEAD BOLT
FLAT WASHER
12 PCS.
8 PCS.
40 PCS.
20 PCS.
NYLON LOCK NUT
Part numbers are required when ordering parts.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE ILLUSTRATION
Part #1
Part #2
Part #3
HEX HEAD BOLT M10X70mm
QTY. 12
QTY. 8
HEX HEAD BOLT M10X75mm
FLAT WASHER ø11Xø30X2.5mm
QTY. 40
Part #4
NYLON LOCK NUT M10
QTY. 20
ꢀꢁꢂꢃꢄꢅ
ꢀꢁꢂꢂꢃꢄ
ꢀꢁꢂꢃꢄꢅ
h†
7
ꢀꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST/ILLUSTRATION
PART G -- LIFT OFF, 2 PCS
PART A -- FRAME A, 1 PCS
PART B -- FRAME B, 1 PCS
PART C -- FRAME C, 2 PCS
PART D -- FRAME D, 4 PCS
PART E -- FRAME E, 2 PCS
PART F -- CHIN UP BAR, 1 PCS
PART H -- SAFETY CATCH, 2 PCS
PART #5 -- FOOT CAP, 4 PCS
PART #6 -- CLIP-ON SPACER, 2 PCS
PART #7 -- END CAP, 4 PCS
PART #8 -- SAFETY PIN, 4 PCS
8
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
9
Download from Www.Somanuals.com. All Manuals Search And Download.
S TE P
Be careful to assemble all components
in the sequence they are presented.
1
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto
bolts, they must be wrench tighten to fully go on.
1A. Install four Foot Caps (#5) in Frame A (A) and Frame B (B).
1B. Install two Clip-On Spacers (#6) on Frame A (A) and Frame B (B).
1C. Attach Frame A (A) and Frame B (B) to Frame C (C) using:
4 - (#1) M10X70mm Hex Head Bolt
8 - (#3) ø11Xø30X2.5mm Flat Washer
4 - (#4) M10 Nylon Lock Nut
10
Download from Www.Somanuals.com. All Manuals Search And Download.
S TE P
1
Above shows STEP 1 assembled and completed.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
S TE P
Be careful to assemble all components
in the sequence they are presented.
2
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto
bolts, they must be wrench tighten to fully go on.
2A. Attach two Frame D (D) to Frame A (A) using:
4 - (#1) M10X70mm Hex Head Bolt
8 - (#3) ø11Xø30X2.5mm Flat Washer
4 - (#4) M10 Nylon Lock Nut
2B. Attach two Frame D (D) to Frame B (B) using:
4 - (#1) M10X70mm Hex Head Bolt
8 - (#3) ø11Xø30X2.5mm Flat Washer
4 - (#4) M10 Nylon Lock Nut
12
Download from Www.Somanuals.com. All Manuals Search And Download.
S TE P
2
Above shows STEP 2 assembled and completed.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
S TE P
Be careful to assemble all components
in the sequence they are presented.
3
NOTE:
Finger tighten all hardware first in this step. Wrench tighten ALL hardware at the
end of STEP 3C. Some components may be pre-assembled. Nylon lock nuts will not
fully screw onto bolts, they must be wrench tighten to fully go on.
3A. Install four End Caps (#7) in two Frame E (E).
3B. Attach one ends of two Frame E (E) and Frame C (C) to Frame D (D) using:
4 - (#2) M10X75mm Hex Head Bolt
8 - (#3) ø11Xø30X2.5mm Flat Washer
4 - (#4) M10 Nylon Lock Nut
3C. Attach another ends of Frame E (E) and Chin Up Bar (F) to Frame D (D)
using:
4 - (#2) M10X75mm Hex Head Bolt
8 - (#3) ø11Xø30X2.5mm Flat Washer
4 - (#4) M10 Nylon Lock Nut
14
Download from Www.Somanuals.com. All Manuals Search And Download.
S TE P
3
Above shows STEP 3 assembled and completed.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
S TE P
Be careful to assemble all components
in the sequence they are presented.
4
4A. Insert Safety Catches (H) and Lift Offs (G) into desired positions.
4B. Insert the Safety Pins (#8) at the ends of the Safety Catches (H) and Lift
Offs (G).
NOTE:
Please make sure the Safety Pins (#8) are fully engaged after Safety
Catches (H) and Lift Offs (G) are inserted into the Frames.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
S TE P
4
Above shows STEP 4 assembled and completed.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED VIEW DIAGRAM
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
BFPR100
PLEASE WRITE YOUR SERIAL NUMBER IN THE BOXES BELOW
S/N # 008274
Download from Www.Somanuals.com. All Manuals Search And Download.
|