BD-D7500
™
Blu-ray Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF ELECTRIC The explanation point within the triangle
triangle is a warning sign alerting you of
dangerous voltage inside the product.
SHOCK, DO NOT REMOVE COVER (OR BACK)
is a warning sign alerting you of important
NO USER SERVICEABLE PARTS INSIDE. REFER instructions accompanying the product.
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
CLASS 1 LASER PRODUCT
•
To reduce the risk of fire or electric shock, do
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
not expose this appliance to rain or moisture.
FCC NOTE (for U.S.A)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.
DANGER :
•
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
•
•
CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM (IEC 60825-1)
The user is encouraged to try to correct the
interference by one or more of the following measures.
•
•
Reorient or relocate the receiving antenna.
THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND DO
NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
Increase the separation between the equipment
and receiver.
•
Connect this equipment into an outlet on a
circuit different from that to which the receiver is
connected.
•
•
Consult the dealer or an experienced radio/TV
technician for help.
This class B digital product meets all
requirements of the Canadian Interference -
Causing Equipment Regulations.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
Note to CATV system installer
LASER APPARAT
PRODUCTO LÁSER CLASE 1
This reminder is provided to call CATV system
installer’s attention to Article 820-40 of the
National Electrical Code (Section 54 of Canadian
Electrical Code, Part I) that provides guidelines
for proper grounding and, in particular, specifies
that the cable ground shall be connected to the
grounding system of the building as close to the
point of cable entry as practical.
NOTE
✎
If the Region number of a Blu-ray Disc/DVDs does
not correspond to the Region number of this player,
the player cannot play the disc.
▪
English
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Precautions
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Keep these operating instructions handy for future
reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
Viewing using 3D function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
•
Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
•
•
Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
•
•
Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.)
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
ꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Storage & Management
Handling Cautions
•
•
Do not write on the printed side with a ball-point
pen or pencil.
Disc Handling
Do not use record cleaning sprays or antistatic
sprays to clean discs. Also, do not use volatile
chemicals, such as benzene or thinner.
Disc Shape
•
Use discs with regular
•
Do not apply labels or stickers to discs. (Do not
use discs fixed with exposed tape adhesive or
leftover peeled-off stickers.)
shapes. If you use an irregular
disc (a disc with a special
shape), you can damage the player.
•
•
Do not use scratch-proof protectors or covers.
Holding discs
Do not use discs printed with label printers
available on the market.
•
Avoid touching the surface of
a disc where data has been
recorded.
•
•
Do not load warped or cracked discs.
Before connecting other components to this
player, be sure to turn them off.
Blu-ray Discs
•
Do not move the player while it is playing a disc.
The disc can be scratched or damaged and the
player’s internal parts can be damaged.
•
Do not leave a Blu-ray Disc in the player for long
periods of time. Remove the Blu-ray Disc from
the player and store it in its case.
•
•
•
•
Do not put a flower vase filled with water or any
small metal objects on the player.
•
Be careful not to scratch or leave fingerprints on
the surface of the Blu-ray Disc.
Be careful not to put your hand into the disc
slot.
DVD-VIDEO, Audio CD (CD-DA)
Do not place anything other than the disc in the
disc slot.
•
Wipe off dirt or contamination on the disc with a
soft cloth.
Interference from exterior sources such as
lightening and static electricity can affect
the normal operation of this player. If this
occurs, turn the player off and on again with
the POWER button, or disconnect and then
reconnect the AC power cord to the AC power
outlet. The player will operate normally.
Disc Storage
Be careful not to damage the disc because the
data on these discs is highly vulnerable to the
environment.
•
•
•
•
•
Do not keep under direct sunlight.
Keep in a cool ventilated area.
Store vertically.
•
•
Be sure to remove the disc and turn off the
player after use.
Disconnect the AC power cord from the AC
outlet when you don’t intend to use the player
for long periods of time.
Keep in a clean protection jacket.
If you move your player suddenly from a cold
place to a warm place, condensation may occur
on the operating parts and lens and cause
abnormal disc playback. If this occurs, unplug
the player, wait for two hours, and then connect
the plug to the power outlet. Then, insert the
disc, and try to play back again.
•
To clean a disc, wipe it in a straight
line from the inside to the outside of
the disc.
•
•
Do not expose the player to any
liquid.
When the AC plug is connected to a wall outlet,
the player will still draw power (standby mode)
when it is turned off.
English
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
•
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
Restrictions on Playback
•
This player may not respond to all operating
commands because some Blu-ray Disc, DVD,
and CD discs allow specific or limited operation
and provide only certain features during
playback.
•
•
•
The main plug is used as a disconnect device
and shall stay readily operable at any time.
Do not touch the power plug with a wet hand.
Otherwise, it can cause an electric shock.
Please note that this is not a defect in the
player.
Do not share one power socket with multiple
electric devices. Otherwise, it may cause an
overheat, resulting in a fire.
•
Samsung cannot guarantee that this player
will play every disc bearing the Blu-ray Disc,
DVD or CD logo because disc formats evolve,
and problems and errors may occur during the
creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
•
If you encounter an abnormal noise, burning
smell or smoke, turn off the power switch
immediately and disconnect the power plug
from the wall outlet. Then, contact the nearest
customer center for technical assistance. If you
still use the product as it is, this may cause an
electric shock or fire.
Please contact the SAMSUNG customer care
center if you have questions or encounter
difficulty in playing Blu-ray Disc, DVD, or CD
discs in this player. Also, refer to rest of this user
manual for additional information on playback
restrictions.
Maintenance of Cabinet
Before you clean the Blu-ray Disc’s cabinet, be
sure to disconnect the AC power cord from the
AC outlet.
•
•
Do not use benzene, thinner, or other solvents
for cleaning.
Wipe the cabinet with a soft cloth.
ꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
2
2
Blu-ray Disc Features
KEy FEATURES
Blu-ray Disc Player Features
3
4
4
4
5
5
Warning
SAFETy INFORMATION
Precautions
Important Safety Instructions
Viewing using 3D function
Disc Storage & Management
Disc Handling
11 Before using the User Manual
GETTING STARTED
11
11
12
12
13
13
14
16
Disc Types and Contents your player can play
Disc types your player cannot play
Blu-ray Disc Compatibility
Disc Types
Region Code
Copyright
Supported File Formats
Logos of Discs the player can play
16 Accessories
17 Top Panel
19 Bottom Panel
20 Remote Control
20
21
Tour of the Remote Control
Setting the Remote Control to Operate Your TV
22 Connecting to a TV
CONNECTIONS
22
23
Case 1 : Connecting to a TV with an HDMI Cable
- Best Quality (Recommended)
Case 2 : Connecting to a TV with an Audio/Video
cable - Good Quality
English
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
24 Connecting to an Audio System
CONNECTIONS
24
25
25
Case 1 : Connecting to an Audio System
(HDMI supported AV receiver) - Best Quality
(Recommended)
Case 2 : Connecting to an Audio System
(AV receiver with Dolby Digital or DTS decoder)
- Better Quality
Case 3 : Connecting to an Audio System
(Stereo Amplifier) - Good Quality
26 Connecting to the Network
26
27
Cable Network
Wireless Network
28 Installing the Blu-ray Disc Player
28
29
Case 1 : Installing on the stand
Case 2 : Installing on a wall
30 Initial Settings
SETUP
31 Accessing the Settings Menu
32 Display
32
33
33
33
33
35
35
36
36
36
3D Settings
TV Aspect
Smart Hub Screen Size
BD Wise (Samsung Players only)
Resolution
HDMI Color Format
Movie Frame (24Fs)
HDMI Deep Color
Still Mode
Progressive Mode
36 Audio
36
38
38
38
38
39
Digital Output
PCM Downsampling
Dynamic Range Control
Downmixing Mode
DTS Neo:6 Mode
Audio Sync
39 Network
39
42
43
Network Settings
Network Status
BD-LIVE Internet Connection
ꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
43 System
SETUP
43
43
43
44
44
44
Initial Settings
Anynet+(HDMI-CEC)
BD Data Management
Time Zone
DivX® Video On Demand
Reset
44 Language
44 Security
44
44
44
BD Parental Rating
DVD Parental Rating
Change Password
45 General
45
45
45
Front Display
Light Effect
Network Remote Control
45 Support
45
47
Software Upgrade
Contact Samsung
48 Playing a Video
BASIC FUNCTIONS
48
48
49
Playback
3D Converter
Disc Structure
49 Using the Disc Menu/Title Menu/Popup Menu
49
49
49
49
Using the Disc Menu
Using the Title Menu
Playing the Title List
Using the Popup Menu
50 Using the Search and Skip Functions
50
50
Searching for a Desired Scene
Skipping Chapters
50 Slow Motion Play/Step Motion Play
50
50
Slow Motion Play
Step Motion Play
English
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
50 Using the TOOLS button
BASIC FUNCTIONS
51
51
51
51
52
52
52
53
53
Moving to a Desired Scene Directly
Repeating the Title or Chapter
Repeating a Section
Changing to Full Screen
Selecting the Picture Settings
Selecting the Audio Language
Selecting the Subtitle Language
Changing the Camera Angle
Setting BONUSVIEW
53 Listening to Music
53
54
54
Playing an Audio CD (CD-DA)/MP3
Repeat an Audio CD (CD-DA)/MP3
Playlist
55 Playing back Pictures
55
55
Playing a JPEG files
Using the TOOLS button
56 Playing back a USB Storage Device
57 Using Smart Hub
NETWORK SERVICES
APPENDIx
57
60
62
64
Starting Smart Hub for the First Time
The Settings Menu - BLUE (D)
The Edit Mode Menu - YELLOW (C)
The Sort Menu - GREEN (B)
64 Samsung Apps
64
For Pay Apps
66 BD-LIVE™
66 Using the AllShare Function
67 Troubleshooting
69
Repairs
70 Index
71 Specifications
10
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Before using the User Manual
Disc Types and Contents your player can play
Term
Logo
Icon
Definition
h
z
Indicates a function available on a BD-ROM or BD-RE/-R disc recorded in the BD-RE
format.
VIDEO
Z
�
Indicates a function available on a DVD-VIDEO or recorded DVD+RW/DVD-RW(V)/
DVD-R/+R discs that have been recorded and finalized.
Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB
storage media containing DivX, MKV, MP4 contents.
-
�
o
�
G
Indicates a function available on an audio CD-RW/-R (CD-DA format).
MUSIC
PHOTO
Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB
storage media containing MP3 or WMA contents.
-
-
Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB
storage media containing JPEG contents.
NOTE
✎
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30 Mbps.
▪
▪
▪
▪
Disc types your player cannot play
•
•
HD DVD
•
•
DVD-RAM
•
•
DVD-RW(VR mode)
•
3.9 GB DVD-R Disc for
Authoring.
DVD-ROM/PD/MV-
Disc, etc
Super Audio CD
(except CD layer)
CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
NOTE
✎
Disc Types
Some commercial discs and DVDs purchased
▪
outside your region may not play on this player.
BD-ROM
Playback may not work for some types of discs, or
when you use specific operations, such as angle
change and aspect ratio adjustment. Information
about the discs is written in detail on the disc box.
Please refer to this if necessary.
▪
Blu-ray ROM discs can only be played back.
This player can play back pre-recorded
commercial BD-ROM discs.
BD-RE/-R
Do not allow the disc to become dirty or scratched.
Fingerprints, dirt, dust, scratches or deposits of
cigarette smoke on the recording surface may make
it impossible to use the disc for playback.
▪
Blu-ray RE/-R discs can be recorded on and
played back.
This player can play back a BD-RE/-R disc
recorded by other compatible Blu-ray Disc
recorders.
Discs with PAL programs recorded on them cannot
▪
▪
▪
be played using this player.
This player is compatible with the NTSC color system
only.
DVD-VIDEO
•
This player can play back pre-recorded
commercial DVDs (DVD-VIDEO discs) with
movies.
When you play a BD-J title, loading may take longer
than a normal title or some functions may perform
slowly.
•
When switching from the first layer to the
second layer of a dual-layered DVD-VIDEO disc,
there may be momentary distortion in the image
and sound. This is not a malfunction of the
player.
This player may not respond to all operating
commands because some Blu-ray Disc, DVD, and
CD discs allow specific or limited operation and
provide only certain features during playback.
Please note that this is not a defect in the player.
▪
Samsung cannot guarantee that this player will play
every disc bearing the Blu-ray Disc, DVD or CD logo
because disc formats evolve, and problems and
errors may occur during the creation of Blu-ray Disc,
DVD, and CD software and/or the manufacture of
discs.
▪
DVD-RW/-R/+R
This player can play back a DVD-RW/-R/+R disc
recorded and finalized with a DVD video recorder.
The ability to play back may depend on recording
conditions.
Please contact the SAMSUNG customer care center
if you have questions or encounter difficulty when
playing Blu-ray Disc, DVD, or CD discs in this player.
Also, refer to rest of this user manual for additional
information on playback restrictions.
DVD+RW
•
This player can play back a DVD+RW disc
recorded with a DVD Video recorder. The
ability to play back may depend on recording
conditions.
Blu-ray Disc Compatibility
Audio CD (CD-DA)
Blu-ray Disc is a new and evolving format.
Accordingly, disc compatibility issues are possible.
Not all discs are compatible and not every disc will
play back. For additional information, refer to the
Compliance and Compatibility Notice section of
this user manual.
•
•
This player can play back CD-DA format audio
CD-RW/-R discs.
The player may not be able to play some
CD-RW/-R discs due to the condition of the
recording.
1ꢀ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-RW/-R
Region Code
•
Use a 700MB (80 minute) CD-RW/-R disc.
If possible, do not use an 800MB (90 minute) or
larger disc, as the disc may not play back.
Both players and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
•
If the CD-RW/-R disc was not recorded as a
closed session, you may experience delays
when playing back the beginning of the disc or
all recorded files may not play.
The Region Number for this player is displayed on
the top panel of the player.
Region
•
Some CD-RW/-R discs may not play on this
player, depending on the device which was
used to burn them. For contents recorded on
CD-RW/-R media from CDs for your personal
use, playability may vary depending on the
contents and discs.
Disc Type
Area
Code
North America, Central America,
South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
A
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
AVCHD (Advanced Video Codec High
Definition)
Blu-ray Disc
B
•
This player can play back AVCHD format discs.
These discs are normally recorded and used in
camcorders.
India, China, Russia, Central
and South Asia.
C
1
2
3
•
•
The AVCHD format is a high definition digital
video camera format.
The U.S., U.S. territories and
Canada
The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
•
Some AVCHD discs use the “x.v.Color” format.
This player can play back AVCHD discs that use
“x.v.Color” format.
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
•
•
“x.v.Color” is a trademark of Sony Corporation.
“AVCHD” and the AVCHD logo are trademarks
of Matsushita Electronic Industrial Co., Ltd. and
Sony Corporation.
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
DVD-VIDEO
4
NOTE
✎
Some AVCHD format discs may not play, depending
on the recording condition.
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
▪
5
6
AVCHD format discs need to be finalized.
“x.v.Color” offers a wider color range than normal
▪
▪
DVD camcorder discs.
China
Some DivX, MKV and MP4 format discs may not
play, depending on the video resolution and frame
rate condition.
Copyright
© 2011 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.
English
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Supported File Formats
Notes on the USB connection
•
•
•
•
•
Your player supports USB storage media, MP3 players, digital cameras, and USB card readers.
The player does not support folder or file names longer than 128 characters.
Some USB/digital camera devices may not be compatible with the player.
Your player supports the FAT16, FAT32, and NTFS files systems.
Connect USB devices directly to the player’s USB port. Connecting through a USB cable may cause
compatibility problems.
•
Inserting more than one memory device into a multi-card reader may cause the reader to operate
improperly.
•
•
•
•
The player does not support the PTP protocol.
Do not disconnect a USB device during a “loading” process.
The bigger the image resolution, the longer the image takes to display.
This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial
sites.
•
•
External HDD device is not supported.
Your player only supports the video that is under 30fps (frame rate).
Video File Support
Frame rate
(fps)
File Extension
Container
Video Codec
Resolution
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
Bit rate (Mbps) Audio Codec
Divx 3.11/4.x/
6 ~ 30
8
MP3
AC3
5.1/6.0
XviD
6 ~ 30
6 ~ 30
6 ~ 30
6 ~ 30
8
25
8
*.avi
LPCM
AVI
MKV
ASF
H.264 BP/MP/HP
MPEG4 SP/ASP
Motion JPEG
ADPCM
DTS Core
8
DivX 3.11/4.x/
5.1/6.0
6 ~ 30
8
1920x1080
MP3
AC3
6 ~ 30
6 ~ 30
6 ~ 30
6 ~ 30
8
25
8
XviD
1920x1080
1920x1080
1920x1080
1920x1080
*.mkv
*.asf
LPCM
H.264 BP/MP/HP
MPEG4 SP/ASP
Motion JPEG
ADPCM
DTS Core
8
DivX 3.11/4.x
/5.1/6.0
6 ~ 30
8
1920x1080
MP3
AC3
6 ~ 30
6 ~ 30
6 ~ 30
6 ~ 30
6 ~ 30
6 ~ 30
6 ~ 30
6 ~ 30
8
25
8
XviD
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
LPCM
ADPCM
WMA
H.264 BP/MP/HP
MPEG4 SP/ASP
Motion JPEG
8
Window Media
Video v9
*.wmv
*.mp4
25
WMA
ASF
25
H.264 BP/MP/HP
MPEG4 SP/ASP
XVID
MP3
ADPCM
AAC
8
MP4
8
1ꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
ADPCM
AAC
6 ~ 30
6 ~ 30
24/25/30
24/25/30
25
8
30
30
H.264 BP/MP/HP
MPEG4 SP/ASP
MPEG2
1920x1080
1920x1080
1920x1080
352 X 288
*.3gp
*.vro
3GPP
HE-AAC
AC3
VRO
VOB
MPEG
MPEG1
LPCM
24/25/30
24/25/30
6 ~ 30
24/25/30
6 ~ 30
30
30
25
30
25
25
MPEG1
MPEG2
H.264
MPEG2
H.264
VC1
352 X 288
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
AC3
MPEG
LPCM
AAC
*.mpg
PS
TS
*.mpeg
AC3
*.ts
*.tp
AAC
MP3
*.trp
DD+
6 ~ 30
HE-AAC
Limitations
.
-
Even when the file is encoded by a supported codec mentioned above, a file might not be played if its
content has a problem.
-
-
-
-
Normal playback is not guaranteed if the file's container information is wrong or the file itself is corrupted.
Files having higher Bit rate/frame rate than standard may stutter with sound/video playback.
Seek (skip) function is not available if the file's index table is damaged.
When you playback a file remotely through network connection, video playback may stutter depending
on established network speed.
Video decoder
.
-
-
-
Supports up to H.264 Level 4.1
Does not support H.264 FMO/ASO/RS, VC1 SP/MP/AP L4 and AVCHD
XVID, MPEG4 SP, ASP :
Below 1280 x 720: 60 frame max
Above 1280 x 720: 30 frame max
-
.
Does not support GMC 2 or higher
Audio decoder
-
-
-
-
-
Supports WMA 7, 8, 9 and STD
Does not support WMA 9 PRO multi-channel if number of channels is more than 2.
Does not support WMA 9 Lossless, voice.
Does not support WMA sampling rate of 220/50Hz mono
Does not support APDCM MULAW, ALAW
Music File Support
File Extension
*.mp3
Container
Audio Codec
Support Range
MP3
-
MP3
Compliant with WMA version 10
*.wma
WMA
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bit rates - All bit-rates in the range 5kbps to 384kbps
WMA
English
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Logos of Discs the player can play
Blu-ray Disc
3D Blu-ray Disc
DTS-HD Master Audio
DivX
Java
NTSC broadcast system in
BD-LIVE
Dolby TrueHD
U.S.A, Canada, Korea, Japan
Accessories
Check for the supplied accessories below.
Audio/Video cable
(AK39-00148A)
Bracket-Wall / Bracket-Set / Bracket-Screw
(AH61-03156A / AH61-03157A / AH61-03164A)
TV
POWER
POWER
2D
�
3D
SOURCE
1
4
2
5
8
0
3
6
7
9
SUBTITLE
AUDIO
DISC MENU
TOOLS
MENU
TITLE MENU
POPUP
INFO
RETURN
EXIT
I@
SMART
HUB
SEARCH
79
MUTE
VOL
CH
Adapter
Assy Holder-Stand
(AK96-01585A)
Remote Control
(AK59-00122A)
(AK44-00012A)
Batteries for Remote Control
(AAA Size)
User Manual
Quick Guide
(AK68-02031A)
(AK68-01996F)
(AC43-12002H)
1ꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
✎
Use only the provided audio/video cable that comes with this player.
▪
The signal from an external source may not be output properly if using other audio/video cable for the connection.
If you lost this cable, visit the nearest Samsung service center for purchasing the cable.
Make sure that the player is installed standing on the ground or hanging on the wall.
Laying down the product on the ground may cause the product malfunction.
▪
Top Panel
a
i
b
d
f
c
h
g
e
POWER BUTTON
Turns the player on and off.
Inserts a disc.
1
2
DISC SLOT
English
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
REMOTE CONTROL SENSOR Detects signals from the remote control.
3
4
5
6
7
8
PLAY/PAUSE BUTTON
ENTER BUTTON
EJECT BUTTON
STOP BUTTON
DISPLAY
Plays a disc or pauses playback.
Selects menu items or starts a disc.
Ejects a disc.
Stops disc playback.
Displays the playing status.
You can connect a USB memory flash stick here and use it as storage when
the player is connected to BD-LIVE. You can also use the USB Host for software
upgrades and MP3/JPEG/DivX/MKV/MP4 playback.
USB HOST
9
NOTE
✎
You can perform software upgrades using the USB Host jack with a USB memory flash stick only.
▪
▪
When the player displays the Blu-ray Disc menu, you may not start the movie by pressing the Play button on the player
or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the ENTER
button.
1ꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Bottom Panel
a
b
c
d
e
DC 12V
Connects to power supply.
1
2
Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal
on your TV for the best quality picture or to your AV receiver for the best quality
sound.
HDMI OUT
A/V OUT
Connects the input of external equipment using a audio/video cable.
Connects to an AV receiver.
3
DIGITAL AUDIO OUT
4
Can be used for network based services (See pages 57~66), BD-LIVE and software
upgrades using a network connection.
LAN
5
English
1ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Remote Control
Tour of the Remote Control
TV
POWER
POWER
Turn the player on and off.
Press to eject a disc.
Turn the TV on and off.
(To operate your TV, please refer to page 21)
�
2D 3D
SOURCE
After setup, allows you to set the input
source on your TV.
Press this when you want to use 3D
function.
1
4
2
5
8
0
3
6
Press numeric buttons to operate options.
7
9
SUBTITLE
AUDIO
Use to access various audio functions on a
disc (Blu-ray Disc/DVD).
Press to switch the Blu-ray Disc/DVD’s
subtitle language.
Press to skip backwards or forwards.
Press to search a disc backwards or
forwards.
Press to stop a disc.
Use to enter the disc menu.
Press to pause a disc.
Press to play a disc.
DISC MENU
TOOLS
MENU
TITLE MENU
POPUP
Use to enter the popup menu/title menu.
Press to move to the home menu.
Press to use Tools menu.
INFO
Use to display the playback information
during playing a Blu-ray Disc/DVDs.
Use to select menu items and change
menu value.
RETURN
EXIT
Return to the previous menu.
Press to exit the menu.
These buttons are used both for menus
on the player and also several Blu-ray Disc
functions.
Press to use Netflix.
SMART
HUB
SEARCH
Press to use Smart Hub.
79
Press to search contents.
MUTE
VOL
CH
TV volume adjustment.
Use to select a TV channel.
Mutes the speakers of your TV.
NOTE
✎
Installing batteries
If the remote does not operate properly:
▪
•
•
•
Check the polarity +/– of the batteries.
Check if the batteries are drained.
Check if the remote sensor is blocked by
obstacles.
•
Check if there is any fluorescent lighting nearby.
CAUTION
!
Dispose of batteries according to local environmental
▪
regulations. Do not put them in the household trash.
English
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ0
TV Control Codes
Setting the Remote Control to
Operate Your TV
Brand
SAMSUNG
AIWA
Code
Brand
NOBLEX
NOKIA
Code
TV POWER+66
TV POWER+74
You can control certain functions of your TV with
this remote control.
TV POWER+01, +02,
+03, +04, +05,
+06, +07, +08, +09
Button
Function
TV POWER+72, +73,
NORDMENDE
PANASONIC
PHILIPS
+75
TV POWER+82
TV POWER
Used to switch the television on and off.
TV POWER+53, +54,
+74, +75
TV POWER+10, +11,
Used to select an external source
ANAM
+12, +13, +14,
TV SOURCE
+15, +16, +17, +18
TV POWER+06, +55,
connected to the TV.
+56, +57
BANG & OLUFSEN TV POWER+57
TV VOL (+/–) Used to adjust the volume of the television.
TV POWER+06, +56,
+57
PHONOLA
PIONEER
BLAUPUNKT
BRANDT
BRIONVEGA
CGE
TV POWER+71
TV POWER+73
TV POWER+57
TV POWER+52
TV CH (
/
)
Used to select the desired channel.
Used to toggle the sound on and off.
, .
TV POWER+58, +59,
+73, +74
TV MUTE
RADIOLA
TV POWER+06, +56
NOTE
✎
CONTINENTAL
RADIOMARELLI TV POWER+57
TV POWER+75
EDISON
The functions listed above will not necessarily work
on all televisions. If you encounter problems, use the
TV remote control.
▪
RCA
REX
TV POWER+45, +46
TV POWER+74
TV POWER+19, +20,
+23, +24, +25,
+26, +27, +28,
+29, +30, +31,
+32, +33, +34
DAEWOO
TV POWER+57, +72,
SABA
SALORA
SANYO
+73, +74, +75
To determine whether your television is
EMERSON
FERGUSON
TV POWER+64
TV POWER+73
TV POWER+74
compatible, follow the instructions below.
TV POWER+41, +42,
1. Switch your television on.
TV POWER+06, +49,
FINLUX
+43, +44, +48
+57
2. Point the remote control towards the
FORMENTI
FUJITSU
GRADIENTE
TV POWER+57
TV POWER+84
TV POWER+70
SCHNEIDER
SELECO
TV POWER+06
TV POWER+74
television.
3. Press and hold the TV POWER button, and
then enter the two-figure code in the table
to the right that corresponds to the brand of
your television by pressing the appropriate
number buttons.
TV POWER+36, +37,
SHARP
+38, +39, +48
TV POWER+49, +52,
GRUNDIG
+71
SIEMENS
SINGER
SINUDYNE
SONY
TELEAVA
TV POWER+71
TV POWER+57
TV POWER+57
TV POWER+35, +48
TV POWER+73
TV POWER+60, +72,
+73, +75
HITACHI
If your television is compatible with the remote
control, it will switch off.
IMPERIAL
JVC
TV POWER+52
TV POWER+61, +79
The remote is now programmed to operate
TV POWER+06, +19,
LG
the TV.
+20, +21, +22, +78
TV POWER+67, +73,
TELEFUNKEN
+75, +76
LOEWE
TV POWER+06, +69
NOTE
✎
TV POWER+72, +73,
+75
LOEWE OPTA TV POWER+06, +57
THOMSON
If several codes are listed for your television brand,
▪
MAGNAVOX
METZ
TV POWER+40
TV POWER+57
try each one in turn until you find one that works.
THOMSON ASIA TV POWER+80, +81
If you replace the remote control’s batteries, you
▪
TV POWER+47, +48,
TOSHIBA
TV POWER+06, +48,
MITSUBISHI
+49, +50, +51, +52
must set the brand code again.
+62, +65
MIVAR
NEC
NEWSAN
TV POWER+52, +77
TV POWER+83
TV POWER+68
WEGA
YOKO
ZENITH
TV POWER+57
TV POWER+06
TV POWER+63
English
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a TV
Case 1 : Connecting to a TV with an HDMI Cable - Best Quality
(Recommended)
1. Using an HDMI cable, connect the HDMI OUT terminal on the player to the HDMI IN terminal of your
TV.
2. Turn on the player and TV.
3. Press the input selector on your TV remote control until the HDMI signal from the player appears on
your TV screen.
•
If you have set the remote control to operate your TV (See page 21), press the TV SOURCE
button on the remote control and select HDMI as the external source of the TV.
HDMI cable
(not included)
NOTE
✎
An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable.
▪
▪
If the player is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed
(category 2) HDMI cable.
HDMI outputs only a pure digital signal to the TV.
▪
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
▪
▪
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest supported by the TV.
You must have an HDMI connection to enjoy videos with 3D technology.
▪
▪
▪
A long HDMI cable may cause a screen noise. If this occurs, set Deep Color to Off in the menu.
If you use HDMI-to-DVI cable to connect to your display device, you must also connect the AV Out or Digital Audio Out to
your display device or an audio sytem to hear audio.
ꢀꢀ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Case 2 : Connecting to a TV with an Audio/Video cable - Good Quality
1. Using an Audio/Video cable, connect the A/V OUT (yellow) terminal on the player to the VIDEO IN
(yellow) / AUDIO IN (red and white) terminals of your TV.
2. Turn on the player and TV.
3. Press the input selector on your TV remote control until the “VIDEO” signal from the player appears
on the TV screen.
•
If you have set the remote control to operate your TV (See page 21), press the TV SOURCE
button on the remote control and select VIDEO as the external source of the TV.
Audio/Video cable
Red
White Yellow
NOTE
✎
Noise may be generated if the audio cable is placed too close to the power cable.
▪
▪
▪
If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 24~25)
The number and position of input terminals may vary depending on your TV set. Please refer to the user manual of your
TV.
CAUTION
!
Do not connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright
▪
protection systems and the picture will be distorted on the television.
English
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to an Audio System
•
Please turn the volume down when you turn on the AV receiver. A sudden loud sound may cause
damage to the speakers and your ears.
•
•
Set the audio output format according to the capabilities of your AV receiver. (See pages 36~39)
The position of HDMI input terminals may vary depending on your AV receiver. Please refer to the
user manual of your AV receiver.
Case 1 : Connecting to an Audio System (HDMI supported AV receiver)
- Best Quality (Recommended)
1. Using an HDMI cable, connect the HDMI OUT terminal on the player to the HDMI IN terminal of your
AV receiver.
2. Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN terminal of
your TV.
3. Turn on the player, TV, and AV receiver.
4. Press the input select button of the AV receiver to select the external input to hear sound from the
player. Refer to your AV receiver’s user manual to set the AV receiver’s audio input.
5. Press the input selector on your TV remote control until the HDMI signal from the player appears on
your TV screen.
HDMI cable
(not included)
HDMI cable
(not included)
ꢀꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Case 2 : Connecting to an Audio
System (AV receiver with Dolby Digital
or DTS decoder) - Better Quality
Case 3 : Connecting to an Audio System
(Stereo Amplifier) - Good Quality
1. Using the Audio/Video cable, connect the A/V
OUT (yellow) terminal on the player to the
AUDIO IN (red and white) terminals of your
stereo using the red and white wires.
1. Using an optical cable, connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the
player to the DIGITAL AUDIO IN (OPTICAL)
terminal of your AV receiver.
2. Using the video signal cable(s), connect the
HDMI terminal on the player to the HDMI
terminal on your TV or connect the yellow
wire from the Audio/Video cable to the AV In
terminal of your TV. (See pages 22~23)
2. Using the video signal cable(s), connect the
HDMI or A/V OUT terminal on the player to
the HDMI or VIDEO IN terminal of your TV.
(See pages 22~23)
3. Turn on the player, TV and Stereo Amplifier.
3. Turn on the player, TV, and AV receiver.
4. Press the input select button of the Stereo
Amplifier to select the external input in order
to hear sound from the player. Refer to your
Stereo Amplifier’s user manual to set the Stereo
Amplifier’s audio input.
4. Press the input select button of the AV receiver
to select the external input and hear sound from
the player. Refer to your AV receiver’s user
manual to set the AV receiver’s audio input.
5. Press the input selector on your TV remote control
5. Press the input selector on your TV remote control
to select the video source (HDMI or Video.)
to select the video source (HDMI or Video.)
Case 3 : Audio/
Video cable
Case 2 : Optical cable
(not included)
Red
White
NOTE
✎
If you use the Digital Audio connection described in Case 2, you will hear only front two speakers with Digital Output
setting as PCM.
▪
▪
To connect to your TV using the Audio/Video cable, you may need to connect an extension cable to the yellow video wire.
If you use an extension cable, the cable must have an RCA male plug on one end and an RCA female jack on the other.
English
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to the Network
This player lets you use network based services (See pages 57~66) such as Smart Hub and BD-LIVE,
and download software upgrades when it is connected to a network. We recommend using an AP (Access
Point) or IP router for the connection. For more information on router connections, refer to the user
manual of the router or contact the router manufacturer for technical assistance.
Cable Network
1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the player to the LAN terminal
of your modem or router.
2. To set the network options, see pages 39~43.
Router
Broadband modem
(with integrated router)
Broadband modem
Or
Broadband
service
Broadband
service
Networking with PC for
AllShare function
NOTE
✎
Internet access to Samsung’s software update server may not be allowed, depending on the router you use or your ISP’s
policy. For more information, contact your ISP (Internet Service Provider).
▪
For DSL users, please use a router to make a network connection.
▪
▪
To use the AllShare function, you must connect your PC to your network as shown in the figure.
The connection can be wired or wireless.
ꢀꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Network
Your player has built in Wi-Fi capability. You can connect to a network through a Wireless IP sharer
(a router or modem).
To set the network options, see pages 39~43.
Broadband
service
Wireless IP sharer
Networking with PC for
AllShare function
NOTE
✎
To use a wireless network, your player must be connected to a wireless IP sharer (router). If the wireless IP sharer
supports DHCP, your player can use a DHCP or static IP address to connect to the wireless network.
▪
▪
▪
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP-
AES (WPS2Mixed) for your AP, this player will not support a connection in compliance with new Wi-Fi certification
specifications.
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration)
or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
▪
▪
You can setup a wireless network three ways:
-
-
-
Wireless (General)
Using WPS(PBC)
One Foot Connection
Wireless (General) includes both Automatic and Manual setup procedures.
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance,
▪
obstacles, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
The player supports only the following wireless security key protocols :
▪
▪
-
WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
To use the AllShare function, you must connect your PC to your network as shown in the figure.
▪
The connection can be wired or wireless.
English
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Installing the Blu-ray Disc Player
You can install your player on a stand or hang it on the wall.
When installing the player, please make sure that enough space is left to insert a disc.
If you do not, player will not operate normally.
Installation Precautions
•
•
If you install your player on a wall, the wall must be flat and vertical.
Avoid installing the player in areas with high temperature or humidity, or on a wall that cannot sustain
the weight of the set.
•
•
Check the strength of the wall. If the strength of the wall is insufficient to support the player, make sure
to reinforce the wall before installing.
Check the compostion of the wall. If the wall is made of plaster board, marble, or iron board, purchase
and use the appropriate mollies and fixing screws.
•
•
Connect all cables from external devices (TV, etc.) to the player before you install it.
If you are installing the player onto plasterboard (dry wall), we recommend locating a stud behind the
wall and screwing the support screws into the stud.
•
•
•
To prevent electric shock, be sure to turn off the player before you install it.
Do not hang on the installed player and avoid hitting it.
Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in injury or in
damage to the product.
•
If you install the player on a wall, please make sure that a child does not pull any of connecting cables,
as it may cause the player to fall.
Case 1 : Installing on the stand
To install on the Stand, insert the Stand Holder into the bottom slot of the Blu-ray Disc player.
ꢀꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Case 2 : Installing on a wall
1. Insert the Bracket-Set into the bottom slot of the Blu-ray Disc player. Insert the two screws as shown
below, and then turn them clockwise to secure it.
2. Place the Wall Bracket on the wall so that the arrow side faces upward and use four screws (not
included) to fix it on the wall. Drive the screws into a stud or into mollies for secure support.
After the Bracket-Set is installed, slide and insert the Blu-ray Disc player into the appropriate
slots of the Wall Bracket.
NOTE
✎
Screws for the wall bracket are not included. Purchase screws (and mollies) appropriate for your type of wall.
▪
English
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
•
Home Menu
Initial Settings
1. Turn on your TV after connecting the player.
When you connect the player to a TV for the
first time, player turns on automatically and
the Initial Settings screen appears.
My Contents
Videos
Photos
Music
My Devices
Internet
Settings
Initial Settings | On-Screen Language
Select a language for the on-screen displays.
Български
Dansk
Hrvatski
Nederlands
Suomi
Čeština
English
Français
Magyar
한국어
d
WPS(PBC)
Eesti keel
Deutsch
Indonesia
Ελληνικά
Italiano
NOTE
✎
m
Move
"
Enter
When the player is connected to the TV for the first
time, the player turns on automatically. This is not a
malfunction.
▪
The Home menu will not appear if you do not
▪
▪
2. Press the ▲▼◄► buttons to select the
desired language, and then press the ENTER
button.
configure the initial settings except as noted below.
If you press the BLUE (D) button during the network
setup, you can access the Home menu even if the
network setup is not completed yet.
3. Press the ENTER button to select Start.
4. Press the ▲▼ buttons to select the desired
TV Aspect Ratio, and then press the ENTER
button. (See page 33)
If you want to display the Initial Setting screen again
to make changes, select the Reset option. (See page
44)
▪
▪
5. Press the ▲▼ buttons to select the desired
If you use an HDMI cable to connect the player to an
Anynet+(HDMI-CEC)-compliant Samsung TV and
1.) You have set the Anynet+(HDMI-CEC) feature
to On in both the TV and the player and 2.) You have
set the TV to a language supported by the player,
the player will select that language as the preferred
language automatically.
Network Settings : Wired, Wireless
(General), WPS(PBC) or One Foot
Connection, and then press the ENTER
button. If you do not know the details of your
Network Settings, press the BLUE (D) button
on your remote instead to skip Network
Settings here, finish the Initial Settings, and go
to the Home menu.
If you leave the player in the stop mode for more
than 5 minutes without using it, a screen saver will
appear on your TV. If the player is left in the screen
saver mode for more than 20 minutes, the power
will automatically turn off.
▪
If you selected a Network Setting, go to
pages 39~43 for more information about the
Network settings. When done, go to Step 6.
6. The Home menu appears. (For more
information about the Home menu, please
see page 31.)
ꢁ0
English
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the ◄► buttons to select Settings,
Accessing the Settings Menu
and then press the ENTER button.
DISC MENU
MENU
TITLE MENU
3. Press the ▲▼ buttons to select the desired
POPUP
1
submenu, and then press the ENTER button.
TOOLS
INFO
4. Press the ▲▼ buttons to select the desired
item, and then press the ENTER button.
3
4
5. Press the EXIT button to exit the menu.
RETURN
EXIT
NOTE
2
✎
When the player is connected to a network, select
Smart Hub from the Home menu.
▪
MENU Button : Press to move to the Home menu.
1
Download the desired content from Samsung Apps.
(See pages 64~66)
RETURN Button : Return to the previous menu.
2
3
4
The access steps may differ depending on the menu
you selected.
▪
▪
ENTER / DIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
The OSD (On Screen Display) may change in this
player after you upgrade the software version.
•
Settings menu
EXIT Button : Press to exit the current menu.
Settings
To access the Settings menu and sub-menus,
Display
Audio
3D Settings
follow these steps:
3D Settings
1. Press the POWER button.
Network
3D Blu-ray Playback Mode : Auto
System
The Home Menu appears.
Screen Size
:
55 inch
Languag
Security
General
Support
•
Home Menu
>
Move
"
Enter
'
Return
My Contents
Videos
Photos
Music
2
3
Above : The Settings menu showing the 3D
Settings sub-menu.
My Devices
Internet
Settings
The following menu items are on the Settings
Menu :
1
4
5
•
•
•
•
•
•
•
•
Display
Audio
d
WPS(PBC)
Network
System
Language
Security
General
Support
Selects My Devices.
Selects My Contents.
Selects Internet.
Selects Settings.
Displays the buttons available.
1
2
3
4
5
The menu items are addressed in the order
listed above on the following pages, starting with
Display.
English
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Display
Screen Size
Lets you enter the actual screen size of your TV so
that the player can adjust the image according to
the screen size and display an optimal 3D image.
(For 3D displays bigger than 116 inches, simply
setting it as 116 is also a safe choice.)
You can configure various display options such as
the TV Aspect Ratio, Resolution, etc.
3D Settings
CAUTION
Select whether to play a Blu-ray Disc with 3D
contents in 3D Mode.
!
If you want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the player’s
HDMI OUT port using a high-speed HDMI cable. Put
on 3D glasses before playing the 3D content.
▪
Settings
Display
Audio
3D Settings
The player outputs 3D signals only through HDMI
cable connected to the HDMI OUT port.
3D Settings
▪
▪
Network
System
Languag
Security
General
Support
3D Blu-ray Playback Mode : Auto
Screen Size
:
55 inch
As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D
video, you can not change the resolution to your
preference.
>
Move
"
Enter
'
Return
Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
▪
3D Blu-ray Playback Mode
You must use a high-speed HDMI cable for proper
output of the 3D signal.
▪
▪
3D Blu-ray Discs are available in two formats: Blu-
ray 3D and 3D only. You can choose to watch a
Blu-ray 3D disc in 3D or 2D mode before playing
the disc.
Stay at least three times the width of the screen from
the TV when watching 3D images. For example, if
you have a 46 inch screen, stay 138 inches (11.5
feet) from the screen.
•
Auto : Automatically detect if a connected TV
has 3D capability and play a Blu-ray 3D disc in
3D or 2D accordingly or a 3D only disc in 3D if
the TV supports 3D.
-
Place the 3D video screen at eye level for the
best 3D picture.
When the player is connected to some 3D devices,
the 3D effect may not function properly.
▪
▪
3D only discs will not be played if your TV does
not support 3D.
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks
of the Blu-ray Disc Association.
•
•
3D 3D : Play 3D only and Blu-ray 3D discs in
3D mode at all times.
3D 2D : Play Blu-ray 3D discs in 2D mode at
all times. 3D only discs will not be played.
NOTE
✎
For some 3D discs, to stop a movie during 3D
▪
playback, press the STOP (
) button once. The
movie stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the STOP (
) button
once. The Blu-ray menu appears. Press the STOP
(
) button again, then select 3D Settings in the
Blu-ray menu.
Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
▪
ꢁꢀ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Aspect
BD Wise (Samsung Players only)
Depending on the type of television you have, you
may want to adjust the screen size setting.
BD Wise is Samsung’s latest inter-connectivity
feature.
When you connect a Samsung player and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the player and
TV, the player outputs video at the video resolution
and frame rate of the Blu-ray Disc/DVDs.
•
16:9 Original : Select when you connect the
player to a 16:9 TV screen. The player will
display all content in its original aspect ratio.
Content formatted in 4:3 will be displayed with
black bars on the left and right.
•
Off : The output resolution stays fixed at the
resolution you set previously in the Resolution
menu, regardless of the resolution of the disc.
See Resolution below.
•
•
16:9 Full : Select when you connect the player
to a 16:9 TV screen. All content will fill the
full screen. Content formatted in 4:3 will be
stretched.
•
On : The player outputs video at the original
resolution and frame rate of the Blu-ray Disc/
DVDs.
4:3 Letter Box : Select when you connect the
player to a 4:3 TV screen. The player will display
all content in its original aspect ratio. Content
formatted in 16:9 will be displayed with black
bars on the top and bottom.
NOTE
✎
When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
▪
▪
▪
•
4:3 Pan-Scan : Select when you connect the
player to a 4:3 TV screen. 16:9 content will have
the extreme left and right portions cut off.
If the player is connected to a device that does not
support BD Wise, you can not use the BD Wise
function.
NOTE
✎
Depending on the disc type, some aspect ratios may
not be available.
▪
▪
For proper operation of BD Wise, set the BD Wise
If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.
menu of both the player and the TV to On.
Resolution
If you select the 16:9 Original, your TV may display
▪
Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p, 480p,
or 480i. The number indicates the number of lines
of video per frame. The i and p indicate interlaced
and progressive scan, respectively. The more
lines, the higher the quality.
4:3 Pillarbox (black bars on sides of picture).
Smart Hub Screen Size
Set the Smart Hub Screen to the optimal size.
•
•
•
Size 1 : Smart Hub screen size will be smaller
than default. You may see some black on sides
of screen.
•
•
Auto : Automatically sets the output resolution
to the connected TV’s maximum resolution.
BD Wise : Automatically sets the resolution to
the resolution of the Blu-ray Disc/DVDs if you
have connected the player via HDMI to a TV
with the BD Wise feature. (The BD Wise menu
item appears only if BD Wise is set to On. See
BD Wise above.)
Size 2 : This is the default setting for Smart
Hub. The player displays the normal Smart Hub
screen size.
Size 3 : This will display a larger Smart Hub
screen size. The image may be too large for
your TV screen.
•
1080p : Outputs 1080 lines of progressive
video.
•
•
•
•
1080i : Outputs 1080 lines of interlaced video.
720p : Outputs 720 lines of progressive video.
480p : Outputs 480 lines of progressive video.
480i : Outputs 480 lines of interlaced video.
English
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Resolution according to the output mode
•
Blu-ray Disc/E-contents/Digital Contents playback
HDMI / connected
HDMI / not connected
VIDEO Mode
HDMI Mode
Output
Setup
VIDEO Mode
E-contents/Digital
Blu-ray Disc
contents
Resolution of Blu-ray
BD Wise
1080p@60F
480i
480i
-
-
Disc
Max. Resolution of TV Max. Resolution of TV
Auto
input
1080p@60F
1080p@24F
1080i
input
1080p@60F
1080p@24F
1080i
1080p@60F
Movie Frame : Auto (24Fs)
480i
480i
480i
480i
480i
-
-
-
1080i
720p
480p
480i
480i
480i
480i
480i
720p
720p
480p
480p
-
-
•
DVD playback
HDMI / connected
HDMI / not connected
Output
Setup
HDMI Mode
VIDEO Mode
VIDEO Mode
BD Wise
Auto
480i
480i
480i
480i
480i
480i
480i
-
-
Max. Resolution of TV input
-
1080p@60F
1080i
1080p@60F
1080i
720p
-
480i
480i
480i
480i
720p
480p
480p
-
480i
ꢁꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
✎
HDMI Color Format
If the TV you connected to the player does not
▪
Lets you set the color space format for HDMI
output to match the capabilities of the connected
device (TV, monitor, etc).
support Movie Frame or the resolution you selected,
the message “If no pictures are shown after
selecting ‘Yes’, please wait for 15 seconds to return
to the previous resolution. Do you want to change
the resolution?” appears.
•
•
Auto : Automatically sets the player to the
optimum format supported by your device.
YCbCr (4:4:4) : If your TV supports the YCbCr
color space via HDMI, select this to output the
normal YCbCr color gamut.
If you select Yes, the TV’s screen will go blank for
15 seconds, and then the resolution will revert to the
previous resolution automatically.
•
•
RGB (Standard) : Select this to output the
If the screen stays blank after you have changed the
▪
normal RGB color gamut.
resolution, remove all discs, and then press and hold
RGB (Enhanced) : If you have connected the
player to a DVI display device such as a monitor,
select this to output the enhanced RGB color
gamut.
the STOP (
) button on the top of the player for
more than 5 seconds. All settings are restored to the
factory default. Follow the steps on the previous page
to access each mode and select the Display Setup
that your TV will support.
When the factory default settings are restored, all
▪
▪
Movie Frame (24Fs)
stored user BD data is deleted.
Setting the Movie Frame (24Fs) feature to Auto
allows you to adjust the player’s HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only
on a TV supporting this frame rate. You can select
Movie Frame only when the player is in the HDMI
1080i or 1080p output resolution modes.
The Blu-ray Disc must have the 24 frame feature for
the player to use the Movie Frame (24Fs) mode.
•
•
Auto : Movie Frame (24Fs) functions work.
Off : Movie Frame (24Fs) functions are off.
English
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Audio
HDMI Deep Color
Lets you output video from the HDMI OUT jack
with Deep Color. Deep Color provides more
accurate color reproduction with greater color
depth.
Digital Output
You set the Digital Output to match the capabilities
of the AV receiver you’ve connected to the player :
•
Auto : The player outputs video with Deep Color
to a connected TV which supports HDMI Deep
Color.
•
•
PCM : Choose if you have connected an HDMI
supported AV receiver.
Bitstream (Unprocessed) : Select if you have
connected an HDMI supported AV receiver
with Dolby TrueHD and DTS-HD Master Audio
decoding capabilities.
•
Off : The picture is output without Deep Color.
Still Mode
•
•
Bitstream (Re-encoded DTS) : Choose if you
have connected an AV receiver using a Digital
Optical input that can decode DTS.
Lets you set the type of picture the player displays
when you pause DVD playback.
•
•
•
Auto : Automatically shows the best still picture
Bitstream (Re-encoded Dolby D) : Select if
you don’t have an HDMI supported AV receiver,
but have an AV receiver with Dolby Digital
decoding capabilities.
depending on the content.
Frame : Select when pausing a scene with a
little action.
Field : Select when pausing a scene with a lot
For more details, please refer to the digital output
selection table. (See page 37)
of action.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
•
Auto : Select to have the player automatically
select the best picture quality for the DVD you’re
watching.
•
Video : Select for the best picture quality from
concert or TV show DVDs.
ꢁꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Output Selection
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Bitstream
Setup
PCM
(Unprocessed)
HDMI
HDMI
HDMI supported HDMI supported
Connection
supported
Optical
supported
Optical
AV receiver or
AV receiver or
AV receiver
AV receiver
Optical
Optical
Up to PCM
Re-encoded
PCM
Dolby Digital
PCM 2ch
PCM
PCM 2ch DTS re-encoded
7.1ch
Dolby Digital *
Up to PCM
7.1ch
Re-encoded
PCM 2ch Dolby Digital Dolby Digital DTS re-encoded
Dolby Digital
Dolby Digital *
Dolby Digital Up to PCM
Re-encoded
PCM 2ch
Dolby Digital DTS re-encoded
Plus
Dolby TrueHD
7.1ch
Plus
Dolby Digital *
Audio Stream
on Blu-ray
Disc
Up to PCM
7.1ch
Re-encoded
PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded
Dolby Digital *
Up to PCM
Re-encoded
DTS
PCM 2ch
DTS
DTS
DTS
DTS re-encoded
DTS re-encoded
6.1ch
Dolby Digital *
DTS-HD High
Resolution
Audio
DTS-HD High
Up to PCM
7.1ch
Up to PCM
Re-encoded
PCM 2ch Resolution
Audio
Dolby Digital *
DTS-HD
DTS-HD
Re-encoded
PCM 2ch
PCM 2ch
DTS
DTS re-encoded
PCM 2ch
PCM 2ch Dolby Digital Dolby Digital Dolby Digital
Master Audio
7.1ch
Master Audio
Dolby Digital *
PCM
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Up to PCM
5.1ch
Audio Stream Dolby Digital
Dolby Digital
on DVD
Up to PCM
6.1ch
DTS
PCM 2ch
DTS
DTS
DTS
DTS
Decodes the main
Decodes main
feature audio and
feature audio and
Outputs only the main
BONUSVIEW audio BONUSVIEW audio
Decodes the main feature feature audio stream so that
audio and BONUSVIEW your AV receiver can decode
stream together
stream together
Definition for
Any
into PCM audio and
into PCM audio
audio stream together
into PCM audio and adds
Navigation Sound Effects.
the audio bitstream.
You will not hear
adds Navigation and add Navigation
Blu-ray Disc
Sound Effects, then Sound Effects, then
BONUSVIEW audio or
Navigation Sound Effects.
re-encodes the
reencodes the PCM
digital bitstream.
PCM audio into DTS audio into Dolby
bitstream.
* If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be
PCM 2ch.
Blu-ray Discs may include three audio streams :
-
-
-
Main Feature Audio : The audio soundtrack of the main feature.
BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may
sound. Navigation Sound Effects are different on each Blu-ray Disc.
English
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
NOTE
✎
Dynamic Range Control
Be sure to select the correct Digital Output or you
▪
You can listen at low volumes, but still hear dialog
will hear no sound or just loud noise.
clearly.
If the HDMI device (AV receiver, TV) is not compatible
with compressed formats (Dolby digital, DTS), the
audio signal outputs as PCM.
▪
This is only active if your player detects a Dolby
Digital signal.
•
Auto : The Dynamic Range Control will be set
automatically based on the information provided
by the Dolby TrueHD Soundtrack.
Regular DVDs do not have BONUSVIEW audio and
▪
▪
▪
Navigation Sound Effects.
Some Blu-ray Discs do not have BONUSVIEW audio
and Navigation Sound Effects.
•
•
Off : You can enjoy the movie with the standard
Dynamic Range.
On : When Movie soundtracks are played at low
volume or through smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
This Digital Output setup does not effect the analog
(L/R) audio or HDMI audio output to your TV.
It effects the optical and HDMI audio output when
your player is connected to an AV receiver.
If you play MPEG audio soundtracks, the audio signal
outputs as PCM regardless of your Digital Output
selections (PCM or Bitstream).
▪
Downmixing Mode
Lets you select how the player will downmix multi-
channel audio into fewer channels.
PCM Downsampling
•
Normal Stereo : Downmixes the multi-channel
audio into two channel stereo. Choose when
connected to equipment that does not support
virtual surround functions such as Dolby Pro
Logic.
Lets you set 48kHz and 96kHz PCM down-
sampling on or off.
•
•
Off : Select when the AV receiver connected to
the player is 96kHz compatible.
On : Select when the AV receiver connected
to the player is not 96kHz compatible. 96kHz
signals will be down converted to 48kHz.
•
Surround Compatible : Downmixes multi-
channel audio into surround compatible stereo.
Choose when connected to equipment that
supports virtual surround functions such as
Dolby Pro Logic.
NOTE
✎
Even when PCM Downsampling is set to Off, some
discs will only output downsampled audio through
the optical digital outputs.
▪
DTS Neo:6 Mode
You can enjoy multi-channel sound from an Audio
CD (CD-DA).
HDMI
•
If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you selected Bitstream (either Re-
encoded or Unprocessed) in the setup menu.
•
•
•
Off : Outputs a 2-channel audio signal through
the front speakers only.
Cinema : Select to play 2-channel movie sound
over multi-channels.
Music : Select to play 2-channel music over
•
If your TV is not compatible with PCM sampling
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling to Off.
multi-channels.
NOTE
✎
If you are using an HDMI supported AV receiver, this
option is available when you set Digital Output setup
as PCM.
▪
ꢁꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Wired Network
Audio Sync
In some cases when the player is connected to a
digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
Setting Up a Wired Connection - Auto
1. Press the ▲▼ buttons to select Wired.
•
You can set the audio delay time between 0
msec and 200 msec.
Settings
Network Settings
Display
Audio
Adjust it to the optimal setting.
Select a network connection type.
Wired
Network
System
Languag
Security
General
Support
NOTE
✎
Wireless
(General)
The audio delay time you specify may not be exact
depending on the played content.
▪
Connect to the network using LAN cable. Please make
WPS(PBC)
sure that the LAN cable is connected.
One Foot
Connection
>
Move
"
Enter
'
Return
Network
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you are using a wired or wireless
connection, we recommend using the Auto
procedures. If you are using a wireless connection
and your router has the capability, you can use
WPS(PBC) or One Foot Connection.
2. Press the ENTER button.
The Network Status screen appears. The
player connects to the network after the
network connection is verified.
Setting Up a Wired Connection - Manual
If your IP address is static, you must use the
manual set up procedure for both wired and
wireless connections.
If you have a static IP address or the Auto Setting
does not work, you’ll need to set the Network
Settings values manually.
To view your Network Settings values on most
Windows computers, follow these steps:
Network Settings
Windows XP
.
To begin setting up the network connection for
your player, follow these steps:
1. Right click the Network icon on the bottom
right of the Windows desktop.
1. In the Home menu, press the ◄► buttons to
select Settings, and then press the ENTER
button.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the Support
2. Press the ▲▼ buttons to select Network, and
tab.
then press the ENTER button.
4. On the Support tab, click the Details button.
3. Press the ▲▼ buttons to select Network
The Network settings are displayed.
Settings, and then press the ENTER button.
Windows 7
.
4. Press the ▲▼ buttons to select Wired,
Wireless (General), WPS(PBC) or One Foot
Connection, and then press the ENTER
button.
1. Click the Network icon on the bottom right of
the Windows desktop.
2. In the pop-up menu, click Network and
Sharing Center.
5. If you have a wired network, go to Wired
Network below. If you have a wireless
network, go to Wireless Network on pages
40~42.
English
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
3. On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
10. Press the ▼ button to go to DNS Mode.
11. Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
12. Press the ENTER button to select OK.
The Network Status screen appears. The
player connects to the network after the
network connection is verified.
4. On the Support tab, click the Details button.
The Network settings are displayed.
NOTE
✎
Depending on your Windows version, the information
may differ.
▪
Wireless Network
You can setup a wireless network three ways:
To enter the Network settings into your player,
follow these steps:
•
•
•
Wireless (General)
Using WPS(PBC)
One Foot Connection
1. Press the ▲▼ buttons to select Wired, and
then press the ENTER button.
Wireless (General) includes both Automatic and
Manual setup procedures.
2. Press the ◄► buttons to select IP Settings,
and then press the ENTER button.
3. On the Network Status screen, select Cancel,
Setting Up the Wireless Network Connection
and then press Enter.
- Auto
Most wireless networks have an optional security
system that requires devices that access the
network to transmit an encrypted security code
called an Access or Security Key. The Security
Key is based on a Pass Phrase, typically a word
or a series of letters and numbers of a specified
length you were asked to enter when you set up
security for your wireless network. If you use this
method of setting up the network connection, and
have a Security Key for your wireless network, you
will have to enter the Pass Phrase during the Auto
setup process.
Settings
IP Settings
0
Display
Audio
IP Mode
Manual
IP Address
0
0
0
0
0
0
0
0
0
Network
System
Languag
Security
General
Support
.
.
.
.
.
.
.
Subnet Mask
Gateway
0
0
.
.
DNS Mode
DNS Server
Manual
0
0
0
0
.
.
.
OK
>
Move
"
Enter
'
Return
4. Press the ENTER button to select IP Mode.
1. Press the ▲▼ buttons to select Wireless
5. Press the ▲▼ buttons to select Manual, and
(General).
then press the ENTER button.
6. Press the ▼ button to go to the first entry field
Settings
(IP Address).
Network Settings
Di
Select a network connection type.
7. Use the number buttons on your remote to
Au
enter numbers.
Ne
Wired
Sy
8. When done with each field, press the ►
button to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
Wireless
(General)
La
Se
Ge
Set up wireless network by selecting your Wireless
Router. You may need to enter security key depending
on the setting of the Wireless Router.
WPS(PBC)
One Foot
Connection
Su
>
Move
"
Enter
'
Return
9. Enter the IP Address, Subnet Mask, and
Gateway values.
2. Press the ENTER button.
When done, it displays a list of the available
networks.
ꢂ0
English
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the ▲▼ buttons to select the desired
network, and then press the ENTER button.
The Security screen appears.
Windows 7
.
1. Click the Network icon on the bottom right of
the Windows desktop.
4. On the Security screen, enter your network’s
Pass Phrase. Enter numbers directly using your
remote control.
2. In the pop-up menu, click Network and
Sharing Center.
3. On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
To select a letter, press the ▲▼◄► buttons to
move the cursor, then press the ENTER button.
Settings
4. On the Support tab, click the Details button.
Display
Audio
Network Settings
The Network settings are displayed.
Enter security key.
0 entered
Network
System
Languag
Security
General
Support
NOTE
a
g
b
h
n
t
c
i
d
j
e
k
f
l
1
4
7
y
2
3
6
9
0
✎
5
8
z
Depending on your Windows version, the information
may differ.
▪
m
s
o
u
p
v
q
r
x
w
a/A
Delete
Space
Done
*
a
Previous
m
Move
"
Enter
'
Return
To enter the Network settings into your player,
follow these steps:
1. Follow Steps 1 through 4 in the ‘Setting Up
the Wireless Network Connection - Auto’
procedure.
NOTE
✎
You should be able to find the Pass Phrase on one of
the set up screens you used to set up your router or
modem.
▪
2. When done, press the GREEN (B) button on
your remote, or press the ▲▼◄► buttons to
move the cursor to Done, and then press the
ENTER button. The Network Status screen
appears.
5. When done, press the GREEN (B) button on
your remote, or press the ▲▼◄► buttons to
move the cursor to Done, and then press the
ENTER button.
Settings
The Network Status screen appears. The
player connects to the network after the
network connection is verified.
IP Settings
0
Display
Audio
IP Mode
Manual
IP Address
0
0
0
0
0
0
0
0
0
Network
System
Languag
Security
General
Support
.
.
.
.
.
.
.
Subnet Mask
Gateway
0
0
.
.
Setting Up the Wireless Network Connection
DNS Mode
DNS Server
Manual
- Manual
0
0
0
0
.
.
.
OK
If the Auto Setting does not work, you need to
enter the Network setting values manually.
>
Move
"
Enter
'
Return
To view the Network Settings values on most
Windows computers, follow these steps:
3. On the Network Status screen, select Cancel,
Windows XP
.
and then press Enter.
1. Right click the Network icon on the bottom
4. Press the ◄► buttons to select IP Settings,
right of the Windows desktop.
and then press the ENTER button.
2. In the pop-up menu, click Status.
5. Press the ENTER button to select IP Mode.
3. On the dialog that appears, click the Support
6. Press the ▲▼ buttons to select Manual, and
tab.
then press the ENTER button.
4. On the Support tab, click the Details button.
7. Press the ▼ button to go to the first entry field
The Network settings are displayed.
(IP Address).
English
ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
8. Use the number buttons to enter numbers.
One Foot Connection
9. When done with each field, press the ►
button to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
You can set up the wireless connection
automatically if you have a Samsung Wireless
Router which supports One Foot Connection. To
connect using the One Foot Connection function,
follow these steps:
10. Enter the IP Address, Subnet Mask, and
Gateway values.
1. Press the ▲▼ buttons to select One Foot
11. Press the ▼ to go to DNS Mode.
Connection.
12. Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
Settings
Network Settings
13. Press the OK button.
Di
Select a network connection type.
Au
14. The Network Status screen appears. The
player connects to the network after the
network connection is verified.
Ne
Wired
Sy
Wireless
(General)
La
Se
Ge
Connect to wireless network automatically if your
Wireless Router supports One Foot Connection. Select
this connection type after placing the Wireless Router
within 10 inches(25cm) of product.
WPS(PBC)
One Foot
WPS(PBC)
Connection
Su
>
Move
"
Enter
'
Return
The easiest way to set up the wireless network
connection is using the WPS(PBC) function or the
One Foot Connection function.
2. Press the ENTER button.
If your wireless router has a WPS(PBC) button,
follow these steps:
3. Place the Samsung Wireless Router within 25
cm (10 inches) of your player to connect.
1. Press the ▲▼ buttons to select WPS(PBC).
4. Wait until the connection is automatically
established.
Settings
Network Settings
Di
Select a network connection type.
Au
Ne
Network Status
Wired
Sy
Wireless
(General)
La
Se
Ge
Connect to the Wireless Router easily by pressing the
WPS(PBC) button. Choose this if your Wireless Router
supports Push Button Configuration(PBC).
Check whether a connection to the network and
the Internet have been established.
WPS(PBC)
One Foot
Connection
Su
>
Move
"
Enter
'
Return
S
Network Status
Di
Au
MAC Address
IP Address
Subnet Mask
Gateway
XX:XX:XX:XX:XX:XX
0.0.0.0
0.0.0.0
2. Press the ENTER button.
Ne
Sy
KT_WLAN
0.0.0.0
DNS Server
0.0.0.0
3. Press the WPS(PBC) button on your router
within two minutes. Your player automatically
acquires all the network settings values it
needs and connects to your network.
LaIn
te
rnet is connected successfully.
If you have a problem using any Internet services, contact your Internet service
Se
provider.
Ge
Su
Network Settings
IP Settings
Retry
OK
<
Move
"
Enter
'
Return
4. The Network Status screen appears. The
player connects to the network after the
network connection is verified.
ꢂꢀ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
✎
BD-LIVE Internet Connection
This function is not available if the HDMI cable does
▪
▪
▪
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
not support CEC.
If your Samsung TV has an Anynet+ logo, then it
•
•
Allow (All) : The Internet connection is allowed
supports the Anynet+ function.
for all BD-LIVE contents.
Depending on your TV, certain HDMI output
resolutions may not work.
Allow (Valid Only) : The Internet connection is
allowed only for BD-LIVE contents containing a
valid certificate.
Please refer to the user manual of your TV.
•
Prohibit : No Internet connection is allowed for
any BD-LIVE content.
BD Data Management
NOTE
✎
Lets you manage the downloaded contents you
accessed through a Blu-ray Disc that supports the
BD-LIVE service and stored on an attached Flash
memory device.
What is a valid certificate?
▪
When the player uses BD-LIVE to send the disc data
and a request to the server to certify the disc, the
server uses the transmitted data to check if the disc is
valid and sends the certificate back to the player.
You can check the device’s information including
the storage size, delete the BD data, or change
the Flash memory device.
The Internet connection may be restricted while you
are using BD-LIVE contents.
▪
Change Device allows you to select either the
player’s Internal Memory or External Memory
(connected USB Device).
System
If the data to be stored from BD-LIVE is greater
than the size of the remaining memory or the
Internal Memory is full, connect an External USB
device, then select External Device in the menu.
Initial Settings
By using the Initial Settings function, you can set
the language, Network Settings, etc.
BD Data Management Screen Information :
For more information about the Initial Settings
function, refer to the Initial Settings section of this
user manual. (See pages 30~47)
•
•
✎
Total Size : Total memory size of the device.
Available Size : Available memory in the device.
NOTE
Anynet+(HDMI-CEC)
In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
▪
Anynet+ is a convenient function that offers linked
operations with other Samsung players that have
the Anynet+ feature.
Only those USB devices formatted in FAT file
system (DOS 8.3 volume label) are supported. We
recommend you use USB devices that support USB
2.0 protocol with 4 MB/sec or faster read/write
speed.
▪
To operate this function, connect this player to a
Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY (
button on the TV’s remote control.
For more information, please see the TV user
manual.
)
The Resume Play function may not work after you
▪
▪
format the storage device.
The total memory available to BD Data Management
may differ, depending on the conditions.
•
•
Off : Anynet+ functions will not work.
On : Anynet+ functions will work.
English
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Security
Time Zone
You can specify the time zone that is applicable to
This function works in conjunction with Blu-ray
Disc/DVDs that have been assigned an age rating
or numeric rating that indicates the maturity level
of the content. These numbers help you control
the types of Blu-ray Disc/DVDs that your family
can watch.
your area.
Settings
Time Zone
Display
Audio
Network
System
Languag
Security
Select an age rating you want to set for the BD
Parental Rating and a rating level you want to set
for the DVD Parental Rating. The player will only
play Blu-ray Discs rated at or below the age rating
and DVDs rated below the numeric rating unless
the password is entered.
GMT + 00:00
General
London, Lisbon, Casablanca
Support
<
Change
"
Save
'
Return
Larger numbers indicate more mature content.
DivX® Video On Demand
BD Parental Rating
View DivX® VOD Registration Codes to purchase
and play DivX® VOD contents.
Prevent playback of Blu-ray Discs with specific
age ratings unless a password is entered.
Reset
DVD Parental Rating
All settings will revert to the default except for the
network and Smart Hub settings.
Prevent playback of DVDs with specific numerical
ratings unless a password is entered.
NOTE
✎
Change Password
The default password is 0000.
▪
Change the 4-digit password used to access
security functions.
Language
You can select the language you prefer for the
If you forgot your password
Home menu, disc menu, etc.
•
•
On-Screen Menu : Select the language for the
1. Remove the disc.
on-screen displays.
2. Press and hold the STOP (
) button on the
Disc Menu : Select the language for the disc
top panel for 5 seconds or more.
menu displays.
All settings will revert to the factory settings.
•
Audio : Select the language for disc audio.
NOTE
✎
•
Subtitle : Select the language for disc subtitles.
When the factory default settings are restored, all
the user stored BD data will be deleted.
▪
NOTE
✎
The selected language will only appear if it is
supported on the disc.
▪
ꢂꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Support
Front Display
Software Upgrade
Change the brightness of the top panel.
The Software Upgrade menu allows you to
upgrade the player’s software for performance
improvements or additional services.
•
•
•
Auto : Dim during playback.
Dim : Dim the display window.
Bright : Brighten the display window.
By Internet
To upgrade by Internet, follow these steps:
Light Effect
1. Select By Internet, and then press the
ENTER button. The Connecting to Server
message appears.
You can adjust the light effect on the player.
•
•
•
Always On : Activate Light Effect at all times.
It is recommended for continuous display for
commercial or demonstration use.
2. If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
Auto : Activate Light Effect when you turn the
player on or off and when you insert or eject a
disc. This is recommended for home use.
3. When the download is complete, the Upgrade
Query window appears with three choices:
Upgrade Now, Upgrade Later, or Don’t
Upgrade.
Off : Turn Light off.
4. If you select Upgrade Now, the player
upgrades the software, turns off, and then
turns on automatically.
Network Remote Control
The Network Remote Control function lets you
control your Blu-ray Disc player from a remote
device such as a smart phone through a wireless
connection to your local area network.
5. If you do not make a selection in one minute
or select Upgrade Later, the player stores
the new upgrade software. You can upgrade
the software later using the By Downloaded
function.
To use the Network Remote Control function,
follow these steps:
1. Select On in the Network Remote Control
6. If you select Don’t Upgrade, the player
menu.
cancels the upgrade.
2. Install the Samsung network remote control
application to control your player on your
compatible portable device.
NOTE
✎
Your player must be connected to the Internet to use
the By Internet function.
▪
▪
▪
3. Make sure your portable device and your
player are connected to the same wireless
router.
The upgrade is complete when the player turns off,
and then turns on again by itself.
Never turn the player off or back on manually during
the update process.
4. Start the application on your portable device.
The application should find your player and
display it on a list.
5. Select the player.
6. If this is the first time you are using the
function, it will ask you to allow or deny
remote control of the player. Select Allow.
7. Follow the instructions that came with the
application to control the player.
English
ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Samsung Electronics shall take no legal responsibility
5. Finalize the disc before you remove it from
▪
for player malfunction caused by an unstable
Internet connection or consumer negligence during a
software upgrade.
your computer.
6. Insert the disc into player.
7. In the player’s menu, go to Settings > Support
If you want to cancel the upgrade while the upgrade
▪
> Software upgrade.
software is downloading, press the ENTER button.
8. Select By Disc.
NOTE
By USB
✎
When the system upgrade is done, check the
To upgrade by USB, follow these steps:
▪
▪
software details in the software Upgrade menu.
Do not turn off the player during the Software
2. Download the latest USB software upgrade
Upgrade. It may cause the player malfunction.
zip archive to your computer.
3. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
By Downloaded
The By Downloaded option lets you upgrade
using a file the player downloaded earlier but
you decided not to install immediately or a file
downloaded by the player in Standby Mode (See
Download in Standby Mode below).
4. Copy the folder to a USB flash drive.
5. No disc should be inserted in the product,
and then insert the USB flash drive into the
USB port of the player.
To upgrade By Downloaded, follow these steps:
6. In the player’s menu, go to Settings > Support
1. If upgrade software has been downloaded,
you will see the software version number to
the right of By Downloaded.
> Software Upgrade.
7. Select By USB.
2. Select By Downloaded, and then press the
NOTE
✎
ENTER button.
No disc should be inserted in the product when you
upgrade the software using the USB Host jack.
▪
▪
▪
▪
3. The player displays a message asking if you
want to upgrade. Select Yes. The player
begins the upgrade.
When the software upgrade is done, check the
software details in the software Upgrade menu.
4. When the update is complete, the player turns
Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
off automatically, and then turns on.
NOTE
✎
Software upgrades using the USB Host jack must be
When the system upgrade is done, check the
software details in the software Upgrade menu.
performed with a USB memory flash stick only.
▪
▪
By Disc
Do not turn off the player during the software
Upgrade. It may cause the player to malfunction.
To upgrade by Disc, follow these steps:
Download in Standby Mode
2. Download the latest disc software upgrade
You can set the Download in Standby Mode
function so that the player downloads new
upgrade software when it is in Standby mode. In
Standby mode, the player is off, but its Internet
connection is active. This allows the player to
download upgrade software automatically, when
you are not using it.
zip archive to your computer.
3. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
4. Write the folder onto a disc. We recommend
a CD-R or DVD-R.
ꢂꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
To set Download in Standby Mode, follow these
steps:
1. Press the ▲▼ buttons to select Download in
Standby Mode, and then press the ENTER
button.
2. Select On or Off.
•
•
Off : If you select Off, the player will notify
you with a pop up message when new
upgrade software is available.
On : If you select On, the player will
automatically download new upgrade
software when it is in Standby mode with
the power off. If it downloads new upgrade
software, the player will ask you if you want
to install it when you turn the player on.
NOTE
✎
To use the Download in Standby Mode function, your
▪
player must be connected to the Internet.
Contact Samsung
Provides contact information for assistance with
your player.
English
ꢂꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Playing a Video
3. You can toggle between 2D and 3D by
pressing the 2D3D button repeatedly.
If you are playing 3D contents in the 3D
mode, you cannot use this function.
Playback
NOTE
✎
1. Push a disc into the Blu-ray Disc player with
You can’t convert 2D contents into 3D or use the 2D
▪
the disc’s label facing up.
3D button In the following cases:
-
When the player is not connected with an HDMI
cable
-
-
When the connected TV does not support 3D
When you are playing 3D contents (disc, file).
2D content is converted into the following 3D
▪
▪
formats:
-
-
-
1080p 24fps : Output to 1080p 24 fps 3D.
Others : Output to 720p 3D.
2. Press the PLAY (
) button.
Photo files : Output to 720p 3D.
Playback related buttons
2D content that the player can convert to 3D:
-
-
2D content that supports 3D conversion
PLAY (
STOP (
PAUSE (
)
Starts playback.
Stops playback.
Smart Hub content, DVD Video, BD-ROM, VCD,
Video files, and photo files.
•
•
If you press the button once : The
stop position is memorized.
When you use the 3D converter, the Bonusview
function is not available.
▪
▪
)
If you press the button twice : The
(Depending on the disc, a black outline appears.)
stop position is not memorized.
Some viewers may experience discomfort while
viewing 3D contents such as dizziness, nausea, and
headaches.
)
Pauses playback.
NOTE
✎
For some discs, pressing the STOP (
) button
Adjusting the 3D Depth
▪
▪
once may not memorize the stop position.
The 3D Depth function lets you adjust the 3D
depth of 2D to 3D conversions. Values range from
1 to 10. The higher the number, the deeper the
3D depth.
Video files with high bit rates of 20Mbps or more
strain the player’s capabilities and may stop playing
during playback.
1. When you are viewing converted 3D contents,
3D Converter
press the TOOLS button.
2. Press the ▲▼ buttons to select 3D Depth
This function can convert the 2D output of 2D
contents into 3D.
and then press the ENTER button.
3. Adjust the 3D Depth using the ◄► buttons.
1. Connect this player to a TV that supports 3D
using an HDMI cable.
2. When you play 2D contents, press the 2D
3D button on the remote control to convert
2D into 3D contents.
ꢂꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Structure
Using the Title Menu
The content of discs are usually divided as shown
below.
Z
1. During playback, press the TITLE
•
Blu-ray Disc, DVD-VIDEO
MENU button on the remote control.
title 1
title 2
2. Press the ▲▼◄► buttons to make
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
the desired selection, then press the ENTER
button.
NOTE
✎
Depending on the disc, the menu items may differ
and this menu may not be available.
▪
•
•
Audio CD (CD-DA)
Playing the Title List
track 1
track 2
track 3
track 4
track 5
file 3
z
1. During playback, press the DISC
MENU or TITLE MENU button.
MP3, WMA, DivX, MKV and MP4
2. Press the ▲▼ buttons to select an
entry you want to play from the Title
List, and then press the ENTER
button.
folder (group) 1
folder (group) 2
file 1 file 2
file 1
file 2
NOTE
✎
If your disc has a playlist, press the GREEN (B) button
▪
to go to the playlist.
Using the Disc Menu/Title Menu/
Popup Menu
Using the Popup Menu
h
Using the Disc Menu
1. During playback, press the POPUP
MENU button on the remote control.
hZ
2. Press the ▲▼◄► buttons or ENTER
1. During playback, press the DISC
button to select the desired menu.
MENU button on the remote control.
NOTE
✎
2. Press the ▲▼◄► buttons to make a
selection, and then press the ENTER
button.
Depending on the disc, the menu items may differ
and this menu may not be available.
▪
NOTE
✎
Depending on the disc, the menu items may differ
and this menu may not be available.
▪
English
ꢂꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
Using the Search and Skip Functions
Slow Motion Play/Step Motion Play
During play, you can search quickly through a
chapter or track, and use the skip function to
jump to the next selection.
Slow Motion Play
hzZ��
)
Searching for a Desired Scene
hzZ��
•
In pause mode, press the SEARCH (
button.
Each time you press the SEARCH (
) button,
•
During playback, press the SEARCH (
)
the playback speed will change as follows:
*
button.
1/8
*
1/4
*
1/2
Each time you press the SEARCH (
)
•
To return to normal speed playback, press the
button, the playback speed will change as follows
:
PLAY (
) button.
NOTE
✎
BD-ROM,
)
)
1
)
)
2
)
)
3
BD-RE/-R,
The player does not play sound in Slow mode.
▪
4
5
6
)
(
7
7
DVD-RW/-R,
DVD+RW/+R,
DVD-VIDEO
(
(
1
(
(
2
(
(
3
4
5
6
Step Motion Play
)
(
1
)
(
2
)
(
3
3
hzZ��
) button.
DivX, MKV, MP4
1
2
•
In pause mode, press the PAUSE (
Each time you press the PAUSE (
) button, a
•
To return to normal speed playback, press the
new frame appears.
PLAY (
) button.
•
To return to normal speed playback, press the
NOTE
✎
PLAY (
) button.
The player does not play sound in search mode.
▪
NOTE
✎
The player does not play sound in Step mode.
▪
Skipping Chapters
Using the TOOLS button
hzZ��
)
•
During playback, press the SKIP (
During playback, you can operate the disc
button.
menu by pressing the TOOLS button.
If you press the SKIP (
If you press the SKIP (
) button, the disc
moves to the next chapter.
•
Tools Menu Screen
) button, the disc
moves to the beginning of the chapter. One
more press makes the disc move to the
beginning of the previous chapter.
Tools
:
Title Search
Chapter Search
Time Search
Repeat Mode
Full Screen
Picture Settings
Audio
1/2
1/20
: 00:00:13/01:34:37
:
:
:
:
:
:
:
:
0ff
Original
Normal
1/1 JPN 2CH
0/2 Off
1/1
Subtitle
Angle
BONUSVIEW Video
BONUSVIEW Audio
Off
0/1 Off
<
Change
"
Enter
'
Return
ꢃ0
English
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
✎
Repeating a Section
Depending on the disc, the Tools menu may differ.
▪
hzZ�
1. During playback, press the TOOLS
Moving to a Desired Scene Directly
hzZ�
button.
1. During playback, press the TOOLS button.
2. Press the ▲▼ buttons to select Repeat Mode.
2. Press the ▲▼ buttons to select Title Search,
3. Press the ◄► buttons to select Repeat A-B,
Chapter Search, or Time Search.
then press the ENTER button.
3. Press the ◄► or number button to select
desired Title, Chapter or Time, then press the
ENTER button.
4. Press the ENTER button at the point where
you want repeat play to start (A).
5. Press the ENTER button at the point where
you want repeat play to stop (B).
Repeating the Title or Chapter
hzZ�
6. To return to normal play, press the TOOLS
button again.
7. Press the ▲▼ buttons to select Repeat Mode.
8. Press the ◄► buttons to select Off, and then
To repeat the disc title or chapter.
press the ENTER button.
Depending on the disc, the Repeat function may
not be available.
NOTE
✎
If you set point (B) before 5 seconds has lapsed, a
1. During playback, press the TOOLS
▪
prohibition message appears.
button.
Depending on the disc, the menu items may differ
▪
and this menu may not be available.
2. Press the ▲▼ buttons to select Repeat Mode.
3. Press the ◄► buttons to select Chapter or
Changing to Full Screen
Title, then press the ENTER button.
4. To return to normal play, press the TOOLS
1. During playback, press the TOOLS button.
button again.
2. Press the ▲▼ buttons to select Full Screen.
5. Press the ▲▼ buttons to select Repeat Mode.
3. Press the ◄► buttons to select the desired
6. Press the ◄► buttons to select Off, then
mode.
press the ENTER button.
NOTE
✎
This function is available when the TV aspect ratio is
16:9 full. (See page 33)
▪
English
ꢃ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
The languages available through the Audio Language
function depend on the languages that are encoded
on the disc. This function or certain languages may
not be available.
▪
Selecting the Picture Settings
hzZ�
This function enables you to adjust video quality
A Blu-ray Disc can contain up to 32 audio languages
▪
▪
▪
when the player is connected to a TV.
and a DVD up to 8.
1. During playback, press the TOOLS button.
Some Blu-ray Discs may allow you to select either
the PCM or Dolby digital audio soundtrack in English.
2. Press the ▲▼ buttons to select Picture
Settings, and then press the ENTER button.
If you press the AUDIO button on the remote control,
Audio bar appears.
3. Press the ◄► buttons to select the desired
Picture Settings, and then press the ENTER
button.
Press the RETURN button to remove the Audio bar.
•
•
•
•
Dynamic : Choose this setting to increase
Selecting the Subtitle Language
hZ�
You can also operate this function by
pressing the SUBTITLE button on the
remote control.
Sharpness.
Normal : Choose this setting for most
viewing applications.
Movie : This is the best setting for watching
movies.
User : Lets you adjust the sharpness and
noise reduction function respectively.
1. During playback, press the TOOLS button.
NOTE
✎
2. Press the ▲▼ buttons to select Subtitle.
When you use BD wise function, this menu will not
▪
appear.
3. Press the ◄► buttons to select the desired
subtitle language.
NOTE
✎
Selecting the Audio Language
hzZ�
You can also operate this function by
pressing the AUDIO button on the
remote control.
Depending on the Blu-ray Disc / DVD, you may be
able to change the desired subtitle in the Disc Menu.
Press the DISC MENU button.
▪
▪
This function depends on the selection of subtitles
that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
A Blu-ray Disc can contain up to 255 subtitle
▪
▪
languages and a DVD up to 32.
1. During playback, press the TOOLS button.
Information about the main feature/BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
2. Press the ▲▼ buttons to select Audio.
3. Press the ◄► buttons to select the desired
audio language.
This function changes both the primary and
▪
▪
▪
NOTE
✎
secondary subtitles at the same time.
The ◄► indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
▪
▪
The total numbers of primary and secondary
subtitles are displayed respectively.
If you press the SUBTITLE button on the remote
Information about the main feature/BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
control, the subtitle bar appears.
Press the RETURN button to remove the subtitle bar.
Press the ◄► button to switch between main
feature and BONUSVIEW audio modes.
ꢃꢀ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to Music
Changing the Camera Angle
o�
Playing an Audio CD (CD-DA)/MP3
hZ
When a Blu-ray Disc/DVD contains multiple angles
of a particular scene, you can use the ANGLE
function.
1. Insert an Audio CD (CD-DA) or an MP3 Disc.
1. During playback, press the TOOLS button.
•
For an Audio CD (CD-DA), the first track
plays automatically.
2. Press the ▲▼ buttons to select Angle.
•
For an MP3 disc, press the ▲▼ buttons to
select Music, then press the ENTER button
on the connected device popup.
3. Press the ◄► buttons to select the desired
Angle.
Press the ENTER button.
Setting BONUSVIEW
Audio CD (CD-DA)/MP3 Screen Elements
h
1
2
3
The BONUSVIEW feature allows you to view
additional content (such as commentaries) in a
small screen window while the movie is playing.
This function is only available if the disc has the
Bonusview feature.
Music
1/13
TRACK 001
TRACK 001
00:43
TRACK 002
1. During playback, press the TOOLS button.
03:56
TRACK 003
04:41
2. Press the ▲▼ buttons to select BONUSVIEW
7
6
TRACK 004
Video or BONUSVIEW Audio.
04:02
+
00:13 / 00:43
3. Press the ◄► buttons to select the desired
Bonusview.
Audio CD
"
Enter
<
Page
/
Tools
'
Return
NOTE
✎
If you switch from BONUSVIEW Video, BONUSVIEW
Audio will change automatically in accordance with
BONUSVIEW Video.
▪
▪
5
4
Displays the music information.
Displays the playlist.
Display the current track/total tracks.
Displays buttons available.
Shows the current play time/total play time.
Displays the current playback status.
Displays the repeated playback status.
1
2D contents are playing convert into 3D, bonusview
2
3
4
5
6
7
function is not available.
(Depending on discs, black outline may be shown)
2. Press the ▲▼ buttons to select the track
you want to play, and then press the ENTER
button.
English
ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
4. Press the ▲▼◄► buttons to move to a
desired track, and then press the ENTER
button. A check appears on the track.
Repeat this procedure to select additional
tracks.
Repeat an Audio CD (CD-DA)/MP3
1. During the Playlist playback, press the
TOOLS button.
2. Press the ▲▼ buttons to select
Repeat Mode, and then press the ◄►
buttons to select the desired repeat mode.
1/2 Page
Audio CD
| Music
Selected Items : 3
3. Press the ▲▼ buttons to select Shuffle Mode,
and then press the ◄► buttons to select On
or Off.
TRACK 001
TRACK 002
00:43
03:56
TRACK 003
04:41
TRACK 004
04:02
TRACK 005
TRACK 006
4. Press the ENTER button.
03:43
03:40
TRACK 007
04:06
TRACK 008
03:52
Songs are played in the order in which
Off
they were recorded.
c
Close Edit Mode
(
)
Page
/
Tools
"
Select
'
Return
(
(
) One Song The current song is repeated.
5. To remove a track from the list, move to the
track, and then press the ENTER button
again.
) All
All songs are repeated.
The random option plays songs in
(
)
Shuffle Mode random order. To operate this function,
The check on the track is cancelled.
please set the shuffle mode to On.
6. When done, press the TOOLS button.
7. Press the ▲▼ buttons to select Play
Selected, and then press the ENTER button.
The tracks you selected play automatically.
Playlist
1. Insert an Audio CD (CD-DA) or an MP3 Disc.
•
For an Audio CD (CD-DA), the first track
Music
1/3
plays automatically.
TRACK 001
TRACK 001
00:43
•
For an MP3 disc, press the ▲▼ buttons
to select Music, then press the ENTER
button.
TRACK 002
03:56
TRACK 003
04:41
2. To move to the Music List, press the STOP
+
00:13 / 00:43
(
) or RETURN button.
The Music List screen appears.
Audio CD
"
Enter
/
Tools
'
Return
3. Press the YELLOW (C) button.
8. To go to the Music List, press the RETURN
button.
NOTE
✎
You can create a playlist with up to 99 tracks on
Audio CDs (CD-DA).
▪
ꢃꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Zoom : Select to enlarge the current picture.
Playing back Pictures
(Enlarged up to 4 times)
Rotate : Select to rotate the picture. (This will
rotate the picture either clockwise or counter
clockwise.)
G
Playing a JPEG files
•
•
Picture Settings : Select this if you want to
adjust the picture quality.
1. Insert a JPEG disc.
Information : Shows the picture information
2. Press the ▲▼ buttons to select Photos, and
including the name and size, etc.
then press the ENTER button.
NOTE
✎
3. Press the ▲▼◄► buttons to select the folder
you want to play, and then press the ENTER
button.
To enable the background music function, the photo
file must be in the same storage media as the music
file. However, the sound quality can be affected by
the bit rate of the MP3 file, the size of the photo, and
the encoding method.
▪
4. Press the ▲▼◄► buttons to select the photo
you want to play, and then press the ENTER
button.
Using the Slide Show function
NOTE
✎
You can’t enlarge the subtitle and PG graphic in the
full screen mode.
▪
1. Press the TOOLS button.
2. Press the ▲▼ buttons to select Start Slide
Show, and then press the ENTER button.
The Slide Show starts.
Using the TOOLS button
3. To pause the slide show, press the TOOLS
button again.
You can use various function by pressing
the TOOLS button.
Tools
Pause Slide Show
Slide Show Speed
Slide Show Effect
Background Music
:
:
:
Normal
Blind
Off
Tools
Start Slide Show
Background Music
:
Off
Background Music Setting
Zoom
Background Music Setting
Zoom
Rotate
Rotate
Picture Settings
Information
Picture Settings
Information
"
Enter
'
Return
"
Enter
'
Return
4. Press the ▲▼ buttons to select Pause Slide
Show, and then press the ENTER button.
•
•
•
Start Slide Show : Select to start the slide
5. You can also set the slide show speed and
show.
effect using the same method.
Background Music : Select to listen to music
while viewing a picture.
Background Music Setting : Select to set the
background music setting.
English
ꢃꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Functions
NOTE
Playing back a USB Storage Device
✎
You must remove the USB storage device safely
▪
You can use the USB connection to play
multimedia files (MP3, JPEG, DivX, etc) located
from a USB storage device.
1. Move to the Home menu.
(by performing the “Safely Remove USB” function)
in order to prevent a possible damage to the USB
memory. Press the MENU button to move to the
Home menu, select the YELLOW (C) button, and
then press the ENTER button.
If you insert a disc when playing a USB storage
device, the device mode changes to “DVD or CD”
automatically.
▪
My Contents
Videos
Photos
Music
My Devices
Internet
Settings
d
WPS(PBC)
2. In Stop mode, connect the USB storage
device to the USB port on the top panel of
the player.
My Contents
Videos
Connected Device
123
My Devices
Settings
"
Enter
'
Return
c
Safely Remove USB
d
WPS(PBC)
3. Press the ENTER button.
4. Press the ▲▼◄► buttons to select the
desired Videos, Music, or Photos, and then
press the ENTER button.
5. For playing back Video, Music or Photo files,
see pages 48~55.
ꢃꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
You can enjoy various network services such as
Smart Hub or BD-LIVE by connecting the player
to your network.
3. The Smart Hub screen appears.
In a few cases, the Country screen appears
immediately after.
4. If the Country screen has appeared, press
the ▲▼ buttons to select your country, then
press the ENTER button.
Read the following instructions before using any
network service.
1. Connect the player to the network.
NOTE
✎
(See pages 26~27)
Certain applications are available only in certain
countries.
▪
2. Configure the network settings.
(See pages 39~43)
5. The Terms of Service Agreement screen
appears.
If you want to agree, press the ◄► buttons
to select Agree, then press the ENTER
button.
Using Smart Hub
Using Smart Hub, you can stream movies, videos,
and music from the Internet, access various for
pay or free-of-charge applications and view them
on your TV. Application content includes news,
sports, weather forecasts, stock market quotes,
maps, photos, and games.
NOTE
✎
Screens can take a few seconds to appear.
▪
6. The Service Update screen appears and
installs a number of services and applications.
When done, it closes. The applications and
services downloaded are displayed on the
Smart Hub screen. This may take some time.
You can also start this function by
pressing the SMART HUB button on
the remote control.
NOTE
✎
Smart Hub may close momentarily during the
installation process.
▪
▪
Starting Smart Hub for the First
Time
A number of screens may appear after installation.
You can press the ENTER button to close them or let
them close on their own.
To start Smart Hub for the first time, follow these
steps :
7. To start an application, press the ▲▼◄►
buttons to highlight a widget, then press the
ENTER button.
1. Go to the Home menu.
My Contents
Videos
Photos
Music
My Devices
Internet
Settings
d
WPS(PBC)
2. Press the ◄► buttons to select Internet, and
then press the ENTER button.
English
ꢃꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Smart Hub at a Glance
Navigation Help : Displays the remote control
buttons you can use to navigate in Smart Hub.
1
2
3
4
5
•
•
•
•
RED (A) : To log in to Smart Hub.
6
GREEN (B) : To sort the applications.
YELLOW (C) : To edit the applications.
BLUE (D) : To change the settings of Smart Hub.
Search
Your Video
Samsung Apps
Contents
1
Contents
2
Contents
3
Contents
4
Recommended
Contents
1
Contents
2
Contents
3
Contents
4
Contents
5
My Applications : Displays your personal gallery
of applications which you can add to, modify, and
delete.
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
7
Contents
1
Contents
2
Contents
3
Contents
4
Contents
5
Contents
6
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
Contents
7
Contents
8
Contents
9
Contents 10
Contents 11
Contents 12
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
NOTE
✎
a
Login
b
Sort by
c
Edit Mode
d
Settings
Samsung Electronics takes no legal responsibility for
any interruption of the Smart Hub service caused by
the service provider for any reason.
▪
7
6
The Smart Hub service downloads and processes
data via the Internet so that you can enjoy the
Internet contents on your TV screen.
If the Internet connection is unstable, the service
may be delayed or interrupted.
▪
Commercial : Displays the Smart Hub Guide, an
introduction to the player, and new application
introductions.
1
2
Your Video : Provides recommendations for videos
Furthermore, the player may turn off automatically in
response to conditions on the Internet.
If this occurs, check the Internet connection and try
again.
based on your tastes.
•
•
Lets you see movie recommendations based on
your previous preferences.
Lets you select a movie, displays a list of VOD
(Video on Demand) providers that have the movie,
and then lets you choose a provider for streaming.
(Streaming is unavailable in some areas.)
Application services may be provided in English only
and the contents available may vary, depending on
your area.
▪
•
For instructions to use Your Video, please visit
For more information about a Smart Hub service,
▪
▪
▪
visit the web site of the applicable service provider.
The services provided are subject to change by the
Smart Hub service provider without notice.
Search : Provides an integrated search of your video
providers and connected AllShare devices.
The Smart Hub service contents may differ
•
•
•
Usable while using Smart Hub (except when you
are watching a Blu-ray Disc).
depending on the player’s firmware version.
3
For easy access, use the SEARCH button on the
remote control.
For instructions to use search function, please
Samsung Apps : You can download various for pay
4
5
or free-of-charge application services.
Recommended : Displays recommended contents
managed by Samsung.
ꢃꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
To move within the text, use the Arrow buttons.
To delete text, move the cursor to the right of the
character you want to delete, and then press the
AUDIO button. To change case or enter numbers
or punctuation, press the SUBTITLE button.
Using the Keypad
Through your remote, you can use the On-Screen
Keypad to enter letters, numbers, and symbols.
Creating an Account
1
2
3
. , –
abc
def
To establish your own, exclusive, configuration of
Smart Hub, create your own Smart TV Account.
4
5
6
1
ghi
jkl
mno
7
8
9
To create an account, follow these steps:
pqrs
tuv
wxyz
0
1. Press the RED (A) button on your remote
2
3
6
Shift
Delete
control. The Create Account screen appears.
T9
ab Ab AB
1
b
Input Method
/
Language: English
Login
Smart TV ID
Password
Press [Enter]
%
4
5
Press [Enter]
Remember my Smart TV ID and password
Login
Cancel
Create Account
Forgot Password
The current keypad.
1
2
Use to enter letters, numbers, and symbols.
Press the SUBTITLE button on the remote control to
shift the input mode.
2. Press the ▲▼◄► buttons to select Create
: ab, Ab, AB, numbers or icons.
Account, and then press the ENTER button.
Displays the current input mode.
3
4
3. On the next screen, select Smart TV ID, and
then press the ENTER button.
Press the GREEN (B) button on the remote control
An entry screen and keypad appear.
to change the input method. (T9 or ABC)
4. Use the keypad to enter your e-mail address.
Press the TOOLS button on the remote control to
This will serve as your ID.
5
6
change the language.
NOTE
✎
Press the AUDIO button on the remote control to
The keypad works like the keypad on a cell phone.
▪
delete a character.
5. When done, press the ENTER button to
select OK, and then press the ENTER
button again. The Create Account screen re-
appears.
Entering Text, Numbers and Symbols
To enter text, press the number button on the
remote that corresponds to the letter you want
to enter. Press the button rapidly to enter a letter
that is not the first letter listed on the On-Screen
keypad button. For example, if you want to enter
the letter b, press the 2 button on your remote
rapidly twice. To enter the first letter listed on a
button, press, release, and then wait.
6. Select Password, and then press the ENTER
button. An entry screen and a keypad appear.
7. Use the keypad to enter a password.
The password can be any combination of
letters, numbers, and symbols.
NOTE
✎
Press the RED (A) button on your remote to show or
▪
hide the password as you enter it.
English
ꢃꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
8. When done, press the ENTER button to
select OK, and then press the ENTER
button again. The Create Account screen re-
appears.
3. Select your ID from the list that appears, and
then press the ENTER button. The Create
Account screen re-appears.
4. Select Password, and then press the ENTER
button. An entry screen and a keypad
appears.
9. Select Confirm password, and then press
the ENTER button.
10. Repeat Steps 7 and 8.
5. Using the keypad and your remote, enter your
password. When done, press the ENTER
button, select OK, and then press the ENTER
button again.
11. When the Create Account screen re-appears,
select Create Account, and then press the
ENTER button. The Confirmation window
appears.
NOTE
✎
12. Select OK, and then press the ENTER
button. The Continue to Register Service
window appears.
If you want Smart Hub to enter your password
▪
automatically, select Remember my Smart TV ID and
password after you have entered your password,
and then press the ENTER button. A check
13. Select Go Register, and then press the
appears. Smart Hub will now enter your password
automatically when you select or enter your ID.
ENTER button.
14. The Register Service Account Window
appears.
•
If you have existing accounts with any of
the listed providers, you can associate the
provider account and the provider account
password with your Smart TV Account.
Registration makes it easier to access
the providers web site. For registration
instructions, go to Step 2 in Account
Management under the Settings Menu.
The Settings Menu - BLUE (D)
The Settings Menu Screen gives you access
to account management, reset, and properties
functions.
To access the Settings Menu, and then select a
menu item, follow these steps:
1. Press the BLUE (D) button on your remote.
•
If you don’t have existing provider accounts
or do not want to register existing accounts
at this time, select OK, and then press
the ENTER button. You can also let the
window close on its own in about a minute.
2. Press the ▲▼ to select a menu item, and
then press the ENTER button.
The functions on the Settings Menu screen are
described below.
NOTE
✎
NOTE
✎
The Service Manager item listed in the Settings
Menu is not available for Blu-ray Disc players.
▪
You must use an e-mail address as an ID.
▪
▪
▪
You can register up to 10 User Accounts.
You do not need an account to use Smart Hub.
Account Management
The Account Management Menu contains
Account Log In
functions that let you register your service provider
accounts, change your Smart Hub password, and
delete or deactivate your Smart TV Account.
To log in to your Smart TV Account, follow these
steps:
1. With the Smart Hub main screen displayed
on your TV, press the RED (A) button on your
remote. The Create Account screen appears.
2. Select the Down Arrow next to the Smart TV
ID field, and then press the ENTER button.
ꢄ0
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Register Service Account
Change Password
If you have existing accounts with any of the
providers listed by the Register Service Account
function, you can associate the provider account
and the provider account password with your
Smart TV Account. If you associate the account,
you will be able to log onto the account through
Smart Hub easily, without entering your account
name or password.
The Change Password function lets you change
your Smart Hub password. To change the
password, follow these steps:
1. Select Change Password, and then press
the ENTER button.
2. Enter your current password. The next screen
appears.
3. On the next screen, enter a new password on
the first line. Enter it again on the second line
to confirm.
To use the Register Service Account function,
follow these steps:
1. In the Account Management menu, select
Register Service Account, and then press the
ENTER button. The Register Service Account
Window appears.
4. The Changing Password Complete message
screen appears. Press the ENTER button
or wait for the screen to close - about 5
seconds.
2. Press the ▲▼ buttons to select a Service
Provider you want to associate with your
Smart TV Account, and then press the
ENTER button.
Remove from TV Account list
The Remove Service Accounts function cancels
all your current registered Service Accounts that
you registered on the Register Service Account
screen.
NOTE
✎
If you have a Samsung apps account and you want
▪
to use the Samsung Apps function in Smart Hub,
you must register your Samsung Apps account here.
See pages 64~66 for more information.
Deactivate Account
The Deactivate Account function deactivates
your Smart TV Account and deletes it and all your
account settings entirely from Smart Hub.
3. Press the ▲▼ buttons to select Register, and
then using your remote and the on-screen
Keypad, enter your site ID and password.
When done, press the ENTER button.
Reset
NOTE
✎
The Reset function initializes all downloaded
widgets, erases all user accounts and settings
from the player, and resets all Smart Hub settings
to the factory default settings. It then restarts
Smart Hub as if it were starting for the first time.
Your account, however, remains on the Smart
Hub server. To log into your account, enter your
ID and password on the Create Account screen.
This is the ID and password you normally use to
access your account on this site.
▪
4. If you have entered the ID and password
correctly, the Registered Successfully
message appears.
5. If you pressed OK, repeat Steps 2 through 4
to associate another Service Provider.
To use the Reset function, follow these steps:
6. When you are done, press the RETURN
1. In the Settings menu, select Reset, and then
button.
press the ENTER button.
The Reset screen appears.
2. Enter the your Security password. This is the
password you entered if you set up a BD or
DVD Parental rating (See page 44). If you did
not, enter 0000.
English
ꢄ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
3. After a few moments, Smart Hub automatically
resets. The screen may go black, then Smart
Hub re-appears. In a few moments, it starts
the re-initialization procedure.
The functions in the Edit Mode Menu bar are
described below.
NOTE
✎
Some menu items may not appear on the screen.
To see these items, press the ◄► to move to the
screen edge, and then press one more time to reveal
the items.
▪
4. To complete the re-initialization, go to Step 4
in Starting Smart Hub for the First Time. (See
page 57)
NOTE
✎
You can close the bar by highlighting the X on the
bottom right side, and then pressing the ENTER
button.
▪
If you forgot your password, press the STOP (
)
▪
button on the top panel of the player for more than 5
seconds with no disc inserted.
Move
Properties
The Move function lets you change the screen
position of a widget. To use the Move function,
follow these steps:
The Properties menu item lists three functions that
display information about Smart Hub :
1. Press the YELLOW (C) button on your
Detail
remote.
Lists information about Smart Hub including
version number, the number of services installed,
memory usage, and the unique product ID.
2. Select a widget, and then press the ENTER
button. A check appears above the widget.
3. Press the ▲▼◄► to select Move, and then
press the ENTER button. A position change
icon appears above the widget.
Terms of Service Agreement
Displays the Terms of Service Agreement.
4. Press the ▲▼◄► to move the icon. Press
the ENTER button when the icon is in the
position of your choice. The widget moves to
its new location.
The Edit Mode Menu - YELLOW (C)
The functions in the Edit Mode menu let you
manipulate the widgets in the My Applications
section of the Smart Hub screen. Using these
functions, you can lock and unlock access to
some widgets, New Folder and move widgets to
them, rename folders, delete widgets, and change
the position of widgets on the screen.
Move to Folder
The Move to Folder function lets you move a
widget to a folder. To use the Move to Folder
function, follow these steps:
1. Press the YELLOW (C) button on your
To access the Edit Mode Menu, and then select a
remote.
menu item, follow these steps:
2. Select a widget, and then press the ENTER
button. If you already create a folder, the
widget can be moved.
1. Press the YELLOW (C) button on your
remote. The Edit Mode menu bar appears on
the bottom of the screen.
3. Press the ▲▼◄► to select Move to Folder,
and then press the ENTER button. The Move
to Folder window opens.
2. Press the ▲▼◄► to select a menu item, and
then press the ENTER button.
4. Press the ▲▼◄► to select a folder, and
then press the ENTER button. The Moved to
Folder message appears, and then closes.
The widget has been moved to the folder.
ꢄꢀ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
To Access Widgets in a Folder
Rename Folder
1. Close the Edit Mode menu.
The Rename Folder function lets you rename
folders. To use the Rename Folder function, follow
these steps:
2. In My Applications, press the ▲▼◄► to
select a folder, and then press the ENTER
button. The folder opens.
1. Press the YELLOW (C) button on your
remote.
3. Select a widget, and then press the ENTER
button. The widget’s application or service
starts.
2. Press the ▲▼◄► to select a folder, and then
press the ENTER button.
3. Press the ▲▼◄► to select Rename Folder,
and then press the ENTER button. The Folder
Rename window and a keypad appears.
To Edit Items in a Folder
Select a folder, and then press the ENTER button.
The folder opens.
4. Use the keypad to enter a new name, and
then press the ENTER button. The Rename
window closes and the new name appears
below the folder.
Press the YELLOW (C) button on your remote.
The Edit buttons appear at the bottom of the
screen.
These buttons work the same as the Edit Mode
menu buttons on the main screen. For example,
to move a widget back to the My Applications
main screen:
Lock
The Lock function lets you lock some widgets
in My Applications so they can not be opened
without entering the Parental Security Code.
1. Select the widget.
2. Select Move to Folder, and then press the
ENTER button. The Move to Folder window
appears.
To use the Lock function, follow these steps:
1. Press the YELLOW (C) button on your
remote.
3. Select My Applications, and then press the
ENTER button. The Move to Folder window
closes and the widget returns to the main My
Applications screen.
2. Press the ▲▼◄► to select a widget, and
then press the ENTER button. If the widget
can be locked, the Lock menu item darkens.
3. Press the ▲▼◄► to select Lock, and then
press the ENTER button. The Lock Service
window appears.
New Folder
The New Folder function lets you create and name
new folders. Once you have created a folder, you
can move widgets into it. To use the New Folder
function, follow these steps:
4. Enter your Parental Security Code (See
page 44). If you have not created a Parental
Security Code, enter 0000.
5. Press the ENTER button. The Lock Service
window appears confirming the lock, and
then closes. A lock symbol appears next to
the widget.
1. Press the YELLOW (C) button on your
remote.
2. Press the ▲▼◄► to move the cursor to New
Folder, and then press the ENTER button.
The New Folder window and a keypad
appear.
3. Use the keypad to enter the name of the
folder, and then press the ENTER button.
The New Folder screen closes and the New
Folder appears on the Smart Hub screen.
English
ꢄꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Unlock
Samsung Apps
1. Press the YELLOW (C) button on your
Samsung Apps lets you download for pay or free-
of-charge applications and services to your Blu-ray
Disc player and view or use them on your TV.
remote.
2. Press the ▲▼◄► to select a locked widget,
These applications and services include videos,
music, photos, games, news, sports, etc. Widgets
for the new apps appear in My Applications.
and then press the ENTER button.
3. Press the ▲▼◄► to select Unlock, and then
press the ENTER button. The Lock Service
window appears.
Additional applications and services are added
regularly.
4. Enter the Parental Security Code (See page
44). If you have not created a Parental
Security Code, enter 0000.
For Pay Apps
5. Press the ENTER button. The Lock Service
Released window appears confirming the lock
has been release, and then closes.
To download for pay apps, you need to create a
Samsung Apps account and add a credit card to the
account.
To create a Samsung Apps account, please visit
Delete
The Delete function lets you delete widgets from
My Applications. To use the Delete function, follow
these steps:
NOTE
✎
This service may not provided in some countries.
▪
1. Press the YELLOW (C) button on your
Accessing the Samsung Apps Screen
remote.
To access Samsung Apps, press the ▲▼◄►
buttons to navigate to the Samsung Apps area
on the Smart Hub main screen, and then press
the ENTER button. The Samsung Apps screen
appears.
2. Press the ▲▼◄► to select a widget, and
then press the ENTER button.
3. Press the ▲▼◄► to select Delete, and then
press the ENTER button. The message, “Do
you want to delete selected item(s)?” appears.
NOTE
✎
4. Select Yes, and then press the ENTER
If this is the first time you are accessing this screen,
the terms of service window appears. If you want
to agree, select Agree, and then press the ENTER
button.
button. The widget is deleted.
▪
The Sort Menu - GREEN (B)
The functions in the Sort Menu let you sort the
widgets in My Applications by Name, Date,
Frequency (of use), and Category. If you manually
change the position of a widget, the Sort Menu
automatically highlights User Defined when you
start it.
To sort the widgets in My Applications, follow
these steps:
1. Press the GREEN (B) button on your remote.
2. Press the ◄► to select a sorting method,
and then press the ENTER button. Smart
Hub sorts the widgets by the method you
have chosen.
ꢄꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Samsung Apps Screen
Samsung Apps by category
To use the Samsung Apps screen, follow these
steps:
The following categories are available:
•
•
•
•
What’s New? : Displays newly registered
applications.
1. Press the ◄► buttons to move to the
Video : Displays various video media such as
category list on the left.
movies, TV shows, and short length videos.
2. Press the ▲▼ to highlight a category. In a few
seconds, the Samsung Apps screen displays
the applications in that category. The Sort
tabs appear across the top.
Game : Displays various games such as sudoku
and chess.
Sports : Displays various sports media services
such as match information, images, and short
length videos.
3. Press the ► button to move to the displayed
applications or services.
•
Lifestyle : Includes various lifestyle media
services such as music, personal photo
management tools, and social networking such
as Facebook and Twitter.
4. Press the ▲▼◄► buttons to select an
application or service, and then press the
ENTER button. The Application Details screen
appears describing the service or application.
•
•
Information : Includes various information
5. Select Download Now, and then press the
ENTER button. If the application or service is
free, it downloads and runs. If not, and there
is a fee, follow the directions on the screen to
complete the download.
services such as news, stocks, and weather.
Other : Includes other miscellaneous services.
My Account
My Account gives you access to your Samsung
Apps order and download history, and to the My
Apps Cash screen. You must have a Samsung
Apps account to access this information.
NOTE
✎
Some apps are free to download, but require
registration with the provider or a paid account with
the provider to use.
▪
▪
Widgets for applications and services you have
downloaded from Samsung Apps appear in My
Applications.
Help
If you have questions about Samsung Apps,
check Help first. If none of the tips apply, please
Sort By Tabs
To use the Help function, follow these steps:
You can access the Sort By tabs on the top of
the screen using the ▲▼◄► buttons. Each
tab displays the services or applications in the
category you chose, sorted by the criteria on the
tab (Recommended, Most Downloaded, Most
Recent, Name).
1. Press the ▲▼◄► buttons to select Help,
and then press the ENTER button.
2. Press the ▲▼ to scroll the Help text.
3. Press the ◄ to exit Help.
You can also use the BLUE (D) button on your
remote to access the Sort By tabs. Each time
you press the BLUE (D) button, you change the
display from one sort tab to the next.
English
ꢄꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Using the colored buttons on your remote
with Samsung Apps
Using the AllShare Function
AllShare lets you play music, video, and photo
files located in your PC or your DLNA compatible
mobile phone or NAS on the player.
•
•
RED (A) (Login) : To log into your Smart TV
Account.
GREEN (B) (Thumbnail View/List View) : To
toggle applications between Thumbnail and List
view.
To use AllShare with your player, you must
connect the player to your network (See pages
26~27).
•
•
BLUE (D) (Sort By) : To sort the applications
in a category by Recommended, Most
Downloaded, Most Recent, or Name.
To use AllShare with your PC, you must install
AllShare software on your PC.
If you have a DLNA compatible mobile phone or
NAS, you can use AllShare without any additional
software.
Return : To return to the previous menu.
NOTE
✎
You can download the PC software and get
detailed instructions for using AllShare from the
Samsung.com web site.
The Internet contents services may be added or
deleted by providers without notice.
▪
For instructions to use Your Video or Search
BD-LIVE™
Once the player is connected to the network, you
can enjoy various movie-related service contents
using a BD-LIVE compliant disc.
1. Attach a USB memory stick to the USB jack
on the side of the player, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
2. Insert a Blu-ray Disc that supports BD-LIVE.
3. Select an item from various BD-LIVE service
contents provided by the disc manufacturer.
NOTE
✎
The way you use BD-LIVE and the provided contents
may differ, depending on the disc manufacturer.
▪
ꢄꢄ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Before requesting service, please check the following.
PROBLEM
SOLUTION
No operation can be performed with the
•
•
•
Check the batteries in the remote control. They may need replacing.
Operate the remote control at a distance of no more than 20 feet.
remote control.
Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
•
•
Ensure that the disc is installed with the label side facing up.
Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear.
•
Ensure that the disc has disc menus.
The prohibition message appears on the
screen.
•
•
•
This message appears when an invalid button is pressed.
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
You’ve requested a title or chapter number or search time that is out of
range.
Play mode differs from the Setup Menu
selection.
•
Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
The screen ratio cannot be changed.
•
•
The Screen Ratio is fixed on your Blu-ray Disc/DVD.
This is not a problem with the player.
No audio.
•
Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blocked
•
•
•
If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
Press the STOP (
) button (on top panel) for more than 5 seconds with
no disc inside. All settings will revert to the factory settings.
When the factory default settings are restored, all stored user BD data is
deleted.
English
ꢄꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
PROBLEM
SOLUTION
Forgot password
•
Press the STOP (
) button (on top panel) for more than 5 seconds with
no disc inside. All settings including the password will revert to the factory
settings.
Don’t use this unless absolutely necessary.
•
•
When the factory default settings are restored, all stored user BD data is
deleted.
If you experience other problems.
Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
•
If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
The picture is noisy or distorted
No HDMI output.
•
•
Make sure that the disc is not dirty or scratched.
Clean the disc.
•
•
Check the connection between the TV and the HDMI jack of the player.
Check if your TV supports 480p, 720p, 1080i, 1080p HDMI input resolution.
Abnormal HDMI output screen.
•
If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
AllShare function
I can see folders shared through AllShare,
•
AllShare shows only files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories may not be
displayed.
but I cannot see the files.
Video is played intermittently.
•
•
Check if the network is stable.
Check if the network cable is properly connected and if the network is not
overloaded.
•
The wireless connection between the DLNA compatible device and the
player is unstable.
Check the connection.
AllShare connection between player and PC
is unstable.
•
•
The IP address under the same subnetwork should be unique. If they are
not, IP interference can cause this phenomenon.
Check if you have a firewall enabled.
If so, disable the firewall function.
ꢄꢆ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM
BD-LIVE
SOLUTION
I cannot connect to the BD-LIVE server.
•
Check whether the network connection is successful or not by using the
Network Status menu. (See page 42)
•
•
Check whether the USB memory device is connected to the player.
The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 43)
•
•
Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
If all above fails, contact the contents provider or update the player to the
latest firmware.
When using the BD-LIVE service, an error
occurs.
•
The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See page 43)
NOTE
✎
When the factory default settings are restored, all stored user BD data is deleted.
▪
Repairs
If you contact us to repair your player, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the product.
2. You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or begin any
work on your player.
or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your
player.
English
ꢄꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Index
K
U
A
Keypad
59
USB Storage Device
56
Accessories
16
66
43
52
AllShare
M
W
Anynet+ (HDMI-CEC)
Audio Language
Movie Frame (24Fs)
MP3
35
Wired Network
39~40
40~42
53~54
Wireless Network
B
N
Z
Background Music
BD Data Management
BD-LIVE
55
43
Network Settings
39~43
Zoom
55
43, 66
33
BD Wise
P
BONUSVIEW
53
PCM Downsampling
Popup Menu
38
49
36
C
Progressive Mode
Camera Angle
53
47
Contact Samsung
R
Region Code
13
20
D
Remote Control
Remote Control Sensor
Resolution
Digital Output
36~38
49
18
Disc Menu
33~35
Disc Structure
Disc Types
49
11~13
38
S
Downmixing Mode
Dynamic Range Control
Samsung Apps
Slide Show
64~66
55
38
Smart Hub
57~66
45~47
52
H
Software Upgrade
Subtitle Language
HDMI Deep Color
36
43
55
I
T
Initial Settings
3D Settings
Title Menu
TV Aspect
32
49
33
J
JPEG
ꢅ0
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Requirements
Power Consumption
Weight
DC12V, 2.0A
17W
2.2 Ibs
General
Disc
Dimensions
15.0 (W) X 6.2 (D) X 0.9 (H) inches
Operating Temperature Range
Operating Humidity Range
BD (Blu-ray Disc)
+41°F to +95°F
10 % to 75 %
Reading Speed : 9.834 m/sec.
Reading Speed : 6.98 ~ 7.68 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
1 Channel : 1.0 Vp-p (75Ω load)
Blu-ray/DVDs : 480i
DVD (Digital Versatile Disc)
CD : 5 inches (COMPACT DISC)
CD : 3 1/2 inches (COMPACT DISC)
Composite Video
Video Output
Video/Audio
Audio Output
2D : 1080p, 1080i, 720p, 480p
3D : 1080p, 720p
HDMI
PCM audio, Bitstream audio
L(1/L), R(2/R)
2 Channel
Digital Audio Output
Ethernet
Optical
10/100BASE-TX Terminal
Built-in
Wireless LAN
WEP (OPEN/SHARED)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
Network
Security
WPS(PBC)
Supported
-
-
-
Design and specifications are subject to change without prior notice.
Weight and dimensions are approximate.
Dispose unwanted electronics through an approved recycler.
(877) 278 - 0799
English
ꢅ1
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Compliance and Compatibility Notice
NOT ALL discs are compatible
•
Subject to the restrictions described below and those noted throughout this Manual, including the Disc
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded
commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and
CD-RW/-R discs.
•
•
Discs other than the above cannot and/or is not intended to be played by this player. And some of the
above discs may not play due to one or more reasons provided below.
Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to
all operating commands or operate all features of every disc. These and other disc compatibility and
player operation issues with new and existing format discs are possible because:
-
Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs
because some features may be optional, additional features may have been added to the Blu-ray
Disc format after the production of this player, and certain available features may be subject to
delayed availability;
-
-
-
not all new and existing disc format versions are supported by this player;
new and existing disc formats may be revised, changed, updated, improved and/or supplemented;
some discs are produced in a manner that allows specific or limited operation and feature during
playback;
-
-
some features may be optional, additional features may have been added after the production of this
player or certain available features may be subject to delayed availability;
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
CD-RW/-R logos may still be non-standardized discs;
-
-
some discs may not be played depending on their physical state or recording conditions;
problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the
manufacture of discs;
-
-
this player operates differently than a standard DVD player or other AV equipment; and/or
for reasons noted throughout this user manual and for other reason(s) discovered and posted by
SAMSUNG customer care center.
•
•
If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer
care center.
You may also contact SAMSUNG customer care center for possible updates on this player.
For additional information on playback restrictions and disc compatibility, refer to the Precautions,
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this
user manual.
Copy Protection
•
Because AACS (Advanced Access Content System) is approved as content protection system for
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain
restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your time of
purchase as those restrictions may be adopted and/or changed by AACS after the production of this
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for
Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,
or this product, please contact SAMSUNG customer care center.
ꢅꢀ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect
your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected Blu-ray Disc/DVDs.
•
•
This item incorporates copy protection technology that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use,
display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other
materials may subject you to civil and/or criminal liability.
•
For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property laws. Such content and services are
provided solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without limiting the
foregoing, unless expressly authorized by the applicable content owner or service provider, you may
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or
distribute in any manner or medium any content or services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” SAMSUNG DOES NOT WARRANT
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY
CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no representation
or warranty that any content or service will remain available for any period of time. Content and services
are transmitted by third parties by means of networks and transmission facilities over which Samsung
has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any
responsibility or liability for any interruption or suspension of any content or service made available
through this device.
Samsung is neither responsible nor liable for customer service related to the content and services.
Any question or request for service relating to the content or services should be made directly to the
respective content and service providers.
English
ꢅꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
License
•
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
•
Manufactured under license under U.S. Patent #’s : 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567
& other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are
trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
•
DivX
®
-
-
ABOUT DIVX VIDEO : DivX is a digital video format created by DivX, Inc.
®
This is an official DivX Certified device that plays DivX video.
®
ABOUT DIVX VIDEO-ON-DEMAND : This DivX Certified device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
®
®
-
-
-
DivX Certified to play DivX video up to HD 1080p, including premium content.
®
®
DivX , DivX Certified and associated logos are trademarks of DivX, Inc. and are used under license.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274.
•
•
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names
may be trademarks of their respective owners
•
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this
product unit and the license does not extend to any unlicensed product unit or process conforming to
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.
The license only covers the use of this product unit to encode and/or decode audio files conforming to
the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features
or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
•
Open Source License Notice
-
In the case of using open source software, Open Source Licenses are available on the product
menu.
•
•
Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
This item incorporates copy protection technology that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
ꢅꢂ
English
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original
consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the
product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts
or products if found to be defective during the limited warranty period specified above. All replaced parts and products become
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original
warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set
forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS
IS” basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the
extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following,
including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this
product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire,
water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories,
applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this
product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure
to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the
instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF
THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE
PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING
THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY
TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Area
Contact Center
Web Site
Area
Contact Center
Web Site
0700 Samsung (0700 726
7864)
` North America
Canada
Serbia
1-800-SAMSUNG (726-7864)
Slovakia
0800-SAMSUNG (726-7864)
Mexico
Spain
U.S.A
1-800-SAMSUNG (726-7864)
Sweden
0771 726 7864 (SAMSUNG)
` Latin America
Argentine
Brazil
ch_fr/(French)
0800-333-3733
0800-124-421 / 4004-0000
800-SAMSUNG (726-7864)
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
0848-SAMSUNG (7267864,
Switzerland
CHF 0.08/min)
Chile
U.K
0330 SAMSUNG (7267864)
0818 717100
Colombia
Costa Rica
Dominica
Ecuador
Eire
Lithuania
Latvia
8-800-77777
8000-7267
Estonia
` CIS
800-7267
El Salvador
Guatemala
Honduras
Jamaica
1-800-299-0013
800-7919267
Russia
Georgia
Armenia
Azerbaijan
8-800-555-55-55
8-800-555-555
0-800-05-555
-
-
-
1-800-234-7267
00-1800-5077267
800-7267
Nicaragua
Panama
088-55-55-555
8-10-800-500-55-500
(GSM: 7799)
Kazakhstan
Uzbekistan
Kyrgyzstan
Tadjikistan
Peru
0-800-777-08
Puerto Rico
1-800-682-3180
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
Trinidad &
Tobago
1-800-SAMSUNG (726-7864)
0-800-100-5303
Venezuela
` Europe
Albania
ua_ru
Ukraine
0-800-502-000
42 27 5755
-
Belarus
810-800-500-55-500
00-800-500-55-500
-
-
0810 - SAMSUNG (7267864,
€ 0.07/min)
Austria
Moldova
` Asia Pacific
be (Dutch)
Australia
1300 362 603
Belgium
02-201-24-18
be_fr (French)
New Zealand
China
Bosnia
Bulgaria
Croatia
05 133 1999
07001 33 11
-
Hong Kong
(852) 3698 4698
hk_en/
800-SAMSUNG (800-726786)
3030 8282 / 1800 110011 /
India
Samsung Zrt., česká organizační
1800 3000 8282 / 1800 266 8282
Czech
složka, Oasis Florenc, Soko-
0800-112-8888 /
021-5699-7777
Indonesia
lovská394/17, 180 00, Praha 8
Denmark
Finland
France
Germany
70 70 19 70
Japan
0120-327-527
1800-88-9999
030 - 6227 515
01 48 63 00 00
Malaysia
1-800-10-SAMSUNG(726-7864) /
1-800-3-SAMSUNG(726-7864) /
1-800-8-SAMSUNG(726-7864) /
02-5805777
01805 - SAMSUNG (726-7864
€ 0,14/Min)
Philippines
Hungary
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
+381 0113216899
261 03 710
Singapore
Thailand
Taiwan
1800-SAMSUNG (726-7864)
Italia
Kosovo
-
0800-329-999
1 800 588 889
Luxemburg
Macedonia
Montenegro
Vietnam
` Middle East
Bahrain
023 207 777
-
-
020 405 888
8000-4726
0900-SAMSUNG
Netherlands
Norway
Poland
(0900-7267864) (€ 0,10/Min)
Egypt
08000-726786
800-22273
815-56 480
Jordan
0 801 1SAMSUNG (172678)
/ 022-607-93-33
Morocco
Oman
080 100 2255
800-SAMSUNG (726-7864)
9200-21230
Portugal
80820-SAMSUNG (726-7864)
Saudi Arabia
Turkey
1. 08010 SAMSUNG (72678) -
doar din reţeaua Romtelecom,
tarif local
444 77 11
U.A.E
800-SAMSUNG (726-7864)
Rumania
` Africa
2. 021.206.01.10 - din orice
reţea, tarif normal
Nigeria
0800-SAMSUNG (726-7864)
0860-SAMSUNG (726-7864 )
South Africa
Download from Www.Somanuals.com. All Manuals Search And Download.
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park,
NJ 07660-2112
1-800-SAMSUNG
IN THE US
(726-7864)
AK68-02031A-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|