OWNER’S
INSTRUCTIONS
AZ09F1KE
WINDOW-TYPE
ROOM AIR CONDITIONER
(Cool and Heat)
E
R
DB68-02037A(1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
◆ PREPARING YOUR AIR CONDITIONER
◆
◆
◆
Safety Precautions .........................................................................................
Air Conditioning Unit - Main Parts and Control Panel ....................................
Getting Started ...............................................................................................
2
4
5
◆ OPERATING YOUR AIR CONDITIONER
◆
◆
◆
◆
◆
◆
Cooling Your Room .........................................................................................
Heating Your Room .........................................................................................
Airing Your Room ............................................................................................
Switching the Air Conditioner Off ...................................................................
Adjusting the Air Flow Direction Horizontally .................................................
Adjusting the Air Flow Direction Vertically ......................................................
6
7
8
8
9
9
◆ RECOMMENDATIONS FOR USE
◆
◆
◆
◆
◆
Operating Recommendations ......................................................................... 10
Temperature and Humidity Ranges ................................................................ 10
Cleaning Your Air Conditioner ......................................................................... 11
Solving Common Problems ............................................................................ 12
Technical Specifications ................................................................................. 13
◆ METHOD OF INSTALLATION ................................................................................. 14
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Air Conditioning Unit - Main Parts and Control Panel
◆ The design and shape are subject to
change according to the model.
Inner air flow blades
(right/left orientation)
Air Outlet
Outer air flow blades
(up/down orientation)
Air inlet (Outside)
Ventilation lever
Air inlet (Inside)
Air filter
(The air filter is located in inside )
Power plug
(The type of power plug may
differ, depending on the local
power supply.)
Temperature
control dial
Operating mode
selection dial
Air flow blade swing switch
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
You have just purchased a w indow -type room air conditioner and it has been installed
by your installation specialist.
Your Ow ner’s Instructions contain much valuable information on using your air conditioner.
Please take the time to read them as they w ill help you take full advantage of the unit’s features.
The booklet is organised as follow s.
◆ The illustration on page 4 show s the air conditioning unit;
it indicates the location and purpose of the m ain parts and controls on the unit.
◆◆In the m ain part of the docum ent, you w ill find a series of step-by-step
procedures for each function available.
The illustrations in the step-by-step procedures use four different symbols:
◆
◆
PRESS
PUSH
IMPORTANT
NOTE
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooling Your Room
You must select the Cool mode if you w ish to low er the temperature
in your room. You can also set the fan speed.
Select the operating mode and fan speed.
1
To cool your room with a...
Set the operating mode
selection dial to...
High fan speed
Low fan speed
HI COOL
LOW COOL
Result: ◆◆The air conditioner starts up in Cool mode.
◆◆The fan starts up at the speed selected.
You can change modes at any time.
◆
2
To adjust the temperature, turn the temperature control dial towards
the right and the blue position.
27˚C ~ 23˚C
Possible temperatures: Between 18°C and 25°C inclusive.
Result: The air conditioner starts cooling if the room temperature
is higher than the selected temperature.
23˚C
~ 18˚C
29˚C
~ 27˚C
To control the direction of the air flow, refer to page 9.
3
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Heating Your Room
You must select the Heat mode if you w ish to heat your room
to a specific temperature. You can also select the fan speed.
Select the operating mode and fan speed.
1
To heat your room with a...
Set the operating mode
selection dial to...
High fan speed
Low fan speed
HI HEAT
LOW HEAT
Result: ◆◆The air conditioner starts up in Heat mode.
◆◆The fan starts up at the speed selected.
You can change modes at any time.
◆
To adjust the temperature, turn the temperature control dial towards
the left and the red position.
2
27˚C ~ 23˚C
Possible temperatures: Between 25°C and 29°C inclusive.
Result: The air conditioner starts heating if the room temperature
is lower than the selected temperature.
23˚C
~ 18˚C
29˚C
~ 27˚C
To control the direction of the air flow, refer to page 9.
3
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Airing Your Room
If the atmosphere in your room is stale, you can air it using
the Fan feature and if necessary, evacuate the stale air outside.
1
If you wish to evacuate stale air outside, pull the ventilation lever on the front
of the unit and the open position ( ).
Result: The air inside the room circulates and stale air is evacuated outside.
Otherwise, push the ventilation lever and the closed position (
Result: The air simply circulates inside the room.
).
Open
Position
Closed
Position
Set the operating mode selection dial to the FAN position.
2
Both fan settings (left and right) have the same function.
◆
Result: The air conditioner starts up in Fan mode.
To control the direction of the air flow, refer to page 9.
3
Switching the Air Conditioner Off
You can sw itch the air conditioner off w henever you w ant.
To switch the unit off, simply set the operating mode selection dial
to the OFF position.
Result:
The air conditioner stops operating.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Air Flow Direction Horizontally
Depending on the position of the unit in your room, you can adjust the
orientation of the inner air flow blades on the right-hand side of the
unit, thus increasing the efficiency of the air conditioner.
1
Set the air flow blade swing switch to the
position .
Result: The inner blades swing automatically left and right.
The blades may stop swinging momentarily when the Deice function
is activated (see page 10 for further details on this function).
They will start swinging again automatically as soon as the Deice
function stops.
◆
2
To stop the blades moving left and right, set the air flow blade swing switch
to the
position.
To stop the blades in a specific position and orient the air flow in the
◆
corresponding direction, simply set the switch to the
when the blades are in the required position.
position
Adjusting the Air Flow Direction Vertically
Again depending on the position of the unit in your room , you can
adjust the orientation of the outer air flow blades on the right-hand
side of the unit.
RECOMMENDATION When...
Adjust the blades to face...
Cooling
Heating
Upwards.
Downwards.
Adjust the air flow blades to the required position, by pushing them
upwards or downwards.
If you orient the air flow blades downwards and the unit operates
in Cool mode for a long period of time, dew may:
◆
◆◆◆Form on the surface of the blades
◆◆◆Drip from the blades
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Recommendations
Here are a few recommendations that you should follow w hen using
your air conditioner.
Topic
Recommendation
Heating
performances
The heat pump inside the air conditioner absorbs heat from
outside air and brings it indoors. If the temperature of the outside
air drops, the air conditioner will heat less. If you find that the room
is not warm enough, use an additional heating appliance.
Warm air
circulation
The air conditioner circulates warm air to heat your room;
as a result, some time will be required after starting
the air conditioner to warm the entire room. If necessary,
set the air conditioner going a short time before you wish
to use the room.
Frost
When outside temperatures are low and humidity is high,
frost may form in the unit’s condenser when heating with your
air conditioner.
If this happens:
◆◆◆The unit stops heating
◆◆◆The air flow blades stop swinging
◆◆◆The Deice mode is triggered automatically for about
five minutes.
No intervention is required from you; after about five minutes,
the air conditioner starts operating again normally.
High indoor
and outdoor
If both the indoor and outdoor temperatures are high and you
select the Heat mode, the fan and compressor in the unit may
temperatures stop at times. This is normal; simply wait until the air conditioner
switches on again.
Power failure If a power failure occurs when the air conditioner is operating,
the unit is switched off. When the power returns,
the air conditioner starts up again automatically.
Temperature and Humidity Ranges
The follow ing table indicates the temperature and humidity ranges,
w ithin w hich the air conditioner can be used.
Mode
Indoor
Outdoor
Indoor Humidity
Temperatures
Temperature
Heating
Cooling
28°C or less
0°C to 21°C approx.
-
21°C to 32°C approx.
21°C to 43°C approx.
80% or less
If the air conditioner is used at...
Then...
Higher temperature
The automatic protection feature may be triggered
and the air conditioner stopped.
Lower temperature
A water leakage or some other malfunction may happen
if the heat exchanger freezes.
Higher humidity levels
Water may condense on and drip from the surface of the unit
if it is used for long periods.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning Your Air Conditioner
Be sure to clean the air filter periodically to m aintain the air conditioner
in the best condition for a long period of tim e.
When cleaning the air conditioner, turn it off and pull out
the pow er plug.
IMPORTANT
1
Hold the air filter handle, slightly pull it to the left side and open the front grille.
The removal of the front grille makes it easier to clean the air
conditioner. Open the grille as much as possible.
◆
CAUTION
Removal and Reassembly of the Front Grille
For user's safety, a safety clip has been installed in the front grille.
1
Grasp the lower part of the
front grille and the air filter
handle, then open the grille.
Safety clip
2
3
Remove the safety clip and
the front grille.
When reassembling the front
grille, you should install the
safety clip again.
2
3
4
Pull the air filter to the right side.
Remove all dust on the air filter with a vacuum cleaner or brush.
When you have finished, insert the air filter back into its original position.
5
Wipe the surface of the unit with a neutral detergent and then wipe it again
with dry cloth.
(Be sure not to use benzene, solvent or other chemical products.)
The air conditioner has two or three
grille grooves depending on the model.
If you...
Then...
◆
◆◆Set the fan going for a few hours to
dry the inside of the air conditioner
thoroughly.
Will not be using the
air conditioner for a
long period of time
◆◆Switch the air conditioner off and
unplug it from the wall socket.
◆◆Clean the filter and outer surfaces.
Have not used the air Set the fan going for a few hours to dry
conditioner for a long
period of time
the inside of the air conditioner
thoroughly.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Common Problems
Before contacting the after-sales service, perform the follow ing simple checks.
They may save you the time and expense of an unnecessary call.
PROBLEM
EXPLANATION / SOLUTION
◆◆ Check that the circuit breaker used for the air conditioner
The air conditioner does not
operate at all
has not been triggered.
◆
◆
Check that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
Check that the correct operating mode has been selected
(cooling, heating or airing).
◆◆◆Check that the correct operating mode has been selected, COOL or HEAT.
◆◆◆The room temperature may be too low or too high.
◆◆◆Dust may be blocking the air filter;
The air conditioner does not
cool or heat
refer to page 11 for cleaning instructions.
◆◆◆Check that there is no obstacle blocking the air flow into or out of the unit.
◆◆◆Check that the required temperature has been set correctly.
◆◆◆Increase the fan speed.
When heating, the required room
temperature is never reached
and the air conditioner
◆◆◆If the air flow is directed downwards, direct it upwards.
frequently stops
◆◆◆Check that the air conditioner has been switched on;
if necessary, turn the operating mode selection dial.
The air flow direction does not
change when you set the air flow
blade swing switch to the
position
◆◆◆Air the room.
Odours are permeated in the
room during air conditioning
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Design and specifications are subject to change w ithout
notice.
Model
Power Supply
220-240V~, 50Hz
AZ09F1KE
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Method of Installation
Before installation, be sure to check the installation area
for the air conditioner, and installation method of the drain hose.
Checkpoints prior to installation
Check the cabinet and front grille of the unit for any harmful defects
such as scratches.
1
Be sure to check the power supply.
2
- Refer to the specifications on the label attached to the unit.
Installation Conditions
As the unit is heavy, the wall or window of the installation area should
have sufficient strength and durability for operation of the air conditioner,
and for prevention of any vibration or noise.
1
If it is weak, reinforcement work should be performed separately.
It is advisable to install the air conditioner in the north or west side to
prevent the effect of direct sunlight.
2
When installing it in the south or east side due to unavoidable
circumstances, it is advisable to install the sunshade to prevent the
direct sunlight.
In this case, take care not to cause any hindrance to the flow of outside air.
When installing the air conditioner, be sure to obtain sufficient space on
the rear side of the unit for smooth flow of air.
3
When operating the air conditioner in closed areas such as inner building
with cooling operation, and result in trouble with the unit.
See the illustration below.
Awning
85mm
min.
300mm
200mm
500mm
Fence, wall
or other
obstacle
500mm
500mm
Approx.3
˚
750mm
150mm min.
◆◆If the wall is greater than 150mm thick,
cut the wall back on a 45˚ angle if possible.
◆
45˚
45˚
100mm or more
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation of the Drain Tube
Rear
Fix the drain tube as shown in the figure.
Rubber cap
Gasket
Drain Tube
Screws(2EA)
Installation of the Drain Pan
The procedure for installing the drain pan should be determined by the
condition of the installing area.
◆◆In the case of an area where the drain pan can not be directly
installed on the rear side of the unit after installing the air conditioner.
Example: High storage
Open the front grille ; refer to page 11.
1
2
Screw
Front grille
Remove the screw located at the lower section of the front grille.
It is secured in the
section depending on the model.
Remove the front panel.
3
3-1 Press both sides of the cabinet in the direction of the arrow
as shown in the figure.
3-2 Pull the lower part of the front panel slightly forward.
(below three inches/7cm)
3-3 Lift the front panel upward.
Applying excessive force to remove the front panel
Front panel
◆
may cause damage to the tab ; be sure not to use
excessive force.
Remove two screws on the lower, right and left sides of the unit.
4
5
Remove the chassis from the cabinet.
Remove the rubber cap inserted into the basepan.
6
7
Fix the drain pan as shown in the figure, and then connect the drain hose.
(You can use any commercially-available drain hose.)
Install the cabinet at the specified area after installing the drain pan,
and then re-assemble it in the original condition.
8
Screw
Secure the front panel to the case by replacing the screw removed in
step 2. If a screw not removed in step 2, secure the panel with a
supplied screw.
◆
Rear
Rubber cap
Drain Hose
◆◆In the case of an area where the drain pan can be directly installed
on the rear side of the unit after installing the air conditioner.
Drain Pan
Follow steps 6 and 7 only
1
Bottom-Side View with
Drain Pan and Hose in Place
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
THIS AIR CONDITIONER IS MANUFACTURED BY:
ELECTRONICS
Printed in Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
|