PS15
PB15
PB15PRO
RACK-MOUNT POWER DISTRIBUTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
PowerBrite Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PS15 Guided Tour - Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PS15 Guided Tour - Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PB15 Guided Tour - Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
PB15 Guided Tour - Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PB15PRO Guided Tour - Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
PB15PRO Guided Tour - Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Setting Up and Using Your PowerStrip or PowerBrite . . . . . . . . . . . . . . . . . . 10
Appendix A: LED Or Incandescent? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Copyright 2007, Samson Technologies Corp.
Printed March, 2007 v1.1
Samson Technologies Corp.
45 Gilpin Avenue
Hauppauge, New York 11788-8816
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 631-784-2201
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations on purchasing your Samson PowerStrip, PowerBrite, or PowerBrite
Pro! This manual covers three products: the PowerStrip PS15; the PowerBrite PB15;
and the PowerBrite PB15Pro. All three of these single-space rack units provide
multiple outlets for reliable power distribution with 3-point surge and spike
protection, plus RF (Radio Frequency) filtering. The three products differ in that the
PowerBrite and PowerBrite Pro also provide dual front-panel LED lamps (in retractable
cylinders), with dimmer control, which can be used to fully illuminate your entire
rack of gear. In addition, the PB15 and PB15Pro also provide a rear-panel USB socket
to use with the included LED gooseneck lamp so you can see the back of your
gear. For advance control, the PowerBrite PB15Pro's feature front-panel voltmeter
and ammeter, each with their own large LED display so you can easily monitor
the condition of your power source. The steel chassis and solid build construction
makes the PowerStrip and PowerBrite series reliable tools on the road or in fixed
installations.
In this manual, you’ll find a more detailed description of the features of your
PowerStrip PS15, PowerBrite PB15, or PowerBrite PB15Pro, as well as instructions for
its use and complete specifications. You’ll also find a warranty card enclosed—don’t
forget to fill it out and mail it in! This will enable you to receive online technical
support and will allow us to send you updated information about other Samson
products in the future. Also, be sure to check out our website (www.samsontech.com)
for complete information about our full product line.
With proper care and adequate air circulation, your PowerStrip PS15, PowerBrite PB15,
or PowerBrite PB15Pro will operate trouble free for many years. We recommend you
record your serial number in the space provided below for future reference.
Serial number: __________________________________
Date of purchase: ________________________________
SPECIAL NOTE: Should your PowerStrip PS15, PowerBrite PB15, or PowerBrite PB15Pro
ever require servicing, a Return Authorization number (RA) is necessary. Without this
number, the unit will not be accepted. If purchased in the United States, please call
Samson at (516) 364-2244 for a Return Authorization number prior to shipping the
unit. If you purchased your Samson product outside the United States, please contact
your local distributor for warranty information and service. Please retain the original
packing material and, if possible, return the unit in its original carton and packing
materials.
WARNING: Though the PowerStrip PS15, PowerBrite PB15, and PowerBrite PB15Pro
all provide both surge and spike protection, they are not designed to protect
against major overload situations such as lightning strikes or connection to incorrect
voltage supplies. In the event of either occurrence, unplug all connected equipment
immediately and have your PowerStrip PS15, PowerBrite PB15, or PowerBrite PB15Pro
evaluated by Samson Technical Support or by an authorized Samson service center
before using it again.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PowerStrip & PowerBrite Features
The Samson PowerStrip PS15, PowerBrite PB15, and PowerBrite PB15Pro all utilize
state-of-the-art technology in power distribution and are engineered to the finest
detail. Here are some of their main features:
•
Eight switched, rear panel, AC outlets that allow you to power an entire rack’s worth
of gear from one source. In addition, an unswitched front panel convenience outlet
is provided for temporary power needs (such as plugging in a guitar amplifier,
soldering iron, etc.).
•
•
Rear panel switched outlets are mounted both vertically and horizontally to
accommodate standard 3-pin plugs as well as external transformer AC power
adapters.
3-point surge protection, spike clamping protection and RF filtering enables all
connected equipment to operate with maximum efficiency and minimal noise.
•
•
Front panel, re-settable, 15 amp circuit breaker protects all connected gear.
An independent dedicated switch with status light for powering the rear panel
switched outlets.
•
In the PowerBrite PB15 and PowerBrite PB15Pro, dual slide out cylinders containing
LED light clusters that illuminate all gear underneath with cool, clear light. In
addition, there is automatic switching for turning on the lamps.
•
•
•
•
In the PowerBrite PB15 and PB15Pro, a rear panel USB socket to use with the
included LED gooseneck lamp providing rear rack lighting.
In the PowerBrite PB15Pro, a front panel voltmeter and ammeter that allow you to
monitor changes in the current drawn from both switched and unswitched outlets.
All units are designed to be mounted in the top slot of any standard 19”rack, taking
only a single rack space.
Rugged construction that makes the Samson PowerStrip PS15, PowerBrite
PB15, and PowerBrite PB15Pro eminently roadworthy and extremely reliably in
permanent installation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PS15 Guided Tour - Front Panel
PowerStrip PS15 Front Panel
1: Circuit breaker- This circuit breaker will trip whenever the total load on the PS15
(all rear panel switched outlets plus the front panel unswitched convenience
outlet) exceeds 15 amps. To reset it, unplug one or more devices so as to reduce
the load and gently press the circuit breaker in until you hear it click.
Note: It may take a minute to cool before you can reset it.
2. Vent - Convection cooling is accomplished by the front panel vent holes.
3: Unswitched convenience outlet- This 3-pin AC outlet is active whenever the
PS15 is plugged in, regardless of the setting of the Outlets switch (see #4 below).
4: Outlets switch- Use this to turn the rear panel outlets on or off. When on, the
status light inside this switch is lit red.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PS15 Guided Tour - Rear Panel
PowerStrip PS15 Rear Panel
1. Power cord - Heavy Duty, 14 gauge mains power cord.
2: Switched AC outlets (horizontal mount)- Connect external equipment to these
standard 3-pin AC outlets, which are turned on and off from the front panel
Outlets switch (see #2 on the previous page).
3: Switched AC outlets (vertical mount)- Similar to the AC outlets described in #2
above, these are mounted vertically so as to accommodate external transformer
AC power adapters.
4: Ground Lug - Convenient thumb screw for connecting home run grounds.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PB15 Guided Tour - Front Panel
PowerBrite PB15 Front Panel
1: Circuit breaker- This circuit breaker will trip whenever the total load on the PB15
(all rear panel switched outlets plus the front panel unswitched convenience
outlet) exceeds 15 amps. To reset it, unplug one or more devices so as to reduce
the load and gently press the circuit breaker in until you hear it click.
Note: It may take a minute to cool before you can reset it.
2: Dimmer - Use this to adjust the level of the LED light in the slide-out Lamps.
3: Lamps- Contains the PB15’s 5-LED light. Use the Dimmer control (see #2 above)
to adjust the brightness of the lamps. To turn off the lamp, gently slide the lamp
back in.
4: Vents- Convection cooling is accomplished by the front panel vent holes.
5: Unswitched convenience outlet- This 3-pin AC outlet is active whenever the
PB15 is plugged in, regardless of the setting of the Outlets switch (see #6 below).
6: Outlets switch- Use this to turn the rear panel outlets on or off. When on, the
lamp inside this switch lights red.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
PB15 Guided Tour - Rear Panel
1
2
3
4
5
PowerBrite PB15 Rear Panel
1: Power Cord - Heavy Duty, 14 gauge mains power cord.
2: USB Socket - USB type socket for connecting the included USB gooseneck LED
lamp.
3: Switched AC outlets (horizontal mount)- Connect external equipment to these
standard 3-pin AC outlets, which are turned on and off from the front panel
Outlets switch (see #6 on the previous page).
4: Switched AC outlets (vertical mount)- Similar to the AC outlets described in #3
above, these are mounted vertically so as to accommodate external transformer
AC power adapters.
5: Ground Lug - Convenient thumb screw for connecting home run grounds.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PB15PRO Guided Tour - Front Panel
PowerBrite PB15Pro Front Panel
1: Circuit breaker- This circuit breaker will trip whenever the total load on the
PB15Pro (all rear panel switched outlets plus the front-panel unswitched
convenience outlet) exceeds 15 amps. To reset it, unplug one or more devices so
as to reduce the load and gently press the circuit breaker in until you hear it click.
Note: It may take a minute to cool before you can reset it.
2: Dimmer - Use this to adjust the level of the LED light in the slide out Lamps.
3: Lamps- Contains the PB15Pro’s 5-LED light. Use the Dimmer control (see #2
above) to turn the light on or off. To turn off the lamp, gently slide the lamp back
in.
4: Voltmeter- This three digit LED meter shows the amount of voltage in the
electrical signal being received by the PowerBrite PB15Pro.
WARNING: Severe voltage swings can cause damage to connected
equipment. If you see the voltmeter changing drastically or rapidly,
disconnect the PB15Pro until the source of the problem is identified.
5: Vents- Convection cooling is accomplished by the front panel vent holes.
6: Ammeter- This three digit LED meter shows the amount of current being drawn
by equipment connected to the PB PB15Pro.
WARNING: Severe current swings can cause damage to connected
equipment. If you see the ammeter changing drastically or rapidly,
disconnect the PB15Pro until the source of the problem is identified and
repaired.
7: Unswitched convenience outlet- This 3-pin AC outlet is active whenever the
PB15Pro is plugged in, regardless of the setting of the Outlets switch (see #8
below).
8: Outlets switch- Use this to turn the rear-panel outlets on or off. When on, the
status light inside this switch is lit red.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PB15PRO Guided Tour - Rear Panel
PowerBrite PB15Pro Rear Panel
1: Power Cord - Heavy Duty, 14 gauge mains power cord.
2: USB Socket - USB type socket for connecting the included USB gooseneck LED
lamp.
3: Switched AC outlets (horizontal mount)- Connect external equipment to these
standard 3-pin AC outlets, which are turned on and off from the front panel
Outlets switch (see #8 on the previous page).
4: Switched AC outlets (vertical mount)- Similar to the AC outlets described in #3
above, these are mounted vertically so as to accommodate external transformer
AC power adapters.
5: Ground Lug - Convenient thumb screw for connecting home run grounds.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up and Using Your PowerStrip or PowerBrite
Setting up your PS15, PB15, or PB15Pro is a simple procedure which takes only a few
minutes:
1. Remove all packing materials (save them in case of need for future service) and
install the unit in a standard 19”rack. We recommend that the PB15 and PB15Pro
be placed in the top slot so that its slide-out LED lamps can be used to illuminate
the entire rack of equipment below.
2. Connect the PS15, PB15, or PB15Pro to any standard grounded AC outlet. If you
are using a PB15Pro, the front-panel voltmeter and ammeter will show you the
incoming electrical voltage and current draw of connected equipment.
3. Connect the AC cables of your rack equipment to the rear-panel switched AC
outlets, using the vertically mounted receptacles for external AC transformer
power adapters.
4. Make sure all connected equipment is switched off, then press the front panel
Outlets switch so that its status light is lit red. This activates all rear panel
switched outlets.
5. Turn on all connected equipment, one at a time. If the total load exceeds 15
amps, the front-panel circuit breaker will trip. To reset it, unplug one or more
devices, then press in the front panel circuit breaker.
6. You can also use the unswitched front panel convenience outlet for additional
temporary power needs (such as connecting a guitar amplifier, soldering iron,
etc.). This outlet is fully operational whenever the PS15, PB15, or PB15Pro is
plugged into an AC source, regardless of the position of the front panel Outlets
switch. The front panel circuit breaker affects this outlet as well as all rear-panel
switched outlets.
7. (PB15 and PB15Pro only) - To illuminate the equipment in your rack, gently pull
the front-panel slide-out cylinders out towards you. The lamps will switch on
automatically . You can also illuminate the back of your rack by connecting the
included USB gooseneck LED light.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: LED Or Incandescent?
There are numerous advantages to using the kind of LED (light emitting diode)
lighting provided by the PowerBrite PB15 and PowerBrite PB15Pro over the
incandescent lighting provided by competing rack light products. Here are the main
points to consider when making your purchase:
•
LED lights generate almost no heat at all; incandescent bulbs can generate large
amounts of heat.
•
LED lights last approximately 50% times longer than incandescent ones, with a
typical life of 100,000 hours (as opposed to incandescent lights, which rarely last
more than about 2,000 hours).
•
•
•
LED lights are brighter than incandescent ones and when properly arranged, they
deliver much greater light level.
The quality of our LED light is similar to daylight, while incandescent lights impart
a yellowish, artificial glow.
Taking your rack on the road? LED lights travel better than incandescent ones
because the LED has no delicate filament or glass that can break from mechanical
shock or vibration.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Electrical:
Number of Outlets
PS15, PB15, PB15Pro
8 switched, 1 unswitched
Max. Current
15 Amp (circuit breaker protected)
0 to 130 Vac continuous
Hot to Neutral, Hot to Ground, and Neutral to Ground
340 Vac
Input Voltage (RMS)
Spike Protection Mode
Max. Clamping Voltage (@ 50 A)
Response Time
1 nanosecond
Max. Surge Current
Max. Spike Energy
Noise Attenuation
Power Cord
6,000 Amps (8 x 20 _s pulse)
70 Joules per leg
>20 dB, 1.5 MHz to 200 MHz
Attached, 14 gauge
LED Light Life (Typical)
General:
100,000 Hours
Dimensions
19 in. (w) x 7.5 (d)x 3.5 (h)
482 mm (w)x 190 (d) x 88 (h)
Weight
PS15
5.0 lbs. • 2. 27 kg
6.5 lbs. • 2. 95 kg
7.0 lbs. • 3.18 kg
PB15
PB15PRO
Specifications are subject to change without notice.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Samson Technologies Corp.
45 Gilpin Avenue
Hauppauge, New York 11788-8816
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 631-784-2201
Download from Www.Somanuals.com. All Manuals Search And Download.
|