Revolabs Quick Start Guide
Using a Solo TableTop Wireless Microphone
Remove the microphone from the Charger Base. The microphones
#
turn on and mute themselves automatically when removed from
Step 1
Charger Base (flashing RED LED) to prevent handling noise while
placing the microphone on the table.
The TableTop microphone should be centered on the table in front of
#
users, between 2 to 5 feet (.75 to 1.75m) away. It is always better to
Step 2
put the microphone as close as possible to the person speaking, but
avoid placing the microphone where it might be blocked by laptops
2 to 5 feet (.75 to 1.75m)
or paperwork.
Flashing red = muted
With the microphone in position, un-mute the microphone by
Flashing green = un-muted
#
pressing and releasing the MUTE button (confirm by viewing
Step 3
flashing GREEN LED).
Mute/un-mute toggle button
To turn microphones off, first mute the microphone, and then plug
#
it into the Charger Base. Make sure the RED LED turns on.
Step 4
Optionally, the microphone can be turned off manually. Simply press
and hold the MUTE button for ~10 seconds until the LED turns solid
RED and release button.
You are now ready to experience wireless, rechargeable and
secure (encrypted) collaborative freedom.
Revolabs Inc • 63 Great Road, Maynard, MA 01754 • 1-800-326-1088 • www.revolabs.com • [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|