®
Model DC-1880
Please Read Prior to Use
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Should the ALCI safety device trip (i.e., reset
button pops out) during use, press the reset
button. Should the air styler fail to reset, call
Remington Customer Service at 800-736-4648.
Never operate this appliance if it has been
dropped in water; contact Remington Customer
Service at 800-736-4648.
ALCI SAFETY DEVICE
This hair dryer is provided with an
appliance leakage circuit interrupter
(ALCI) safety device built into the plug.
This device is designed to make the unit
inoperable under some abnormal
This message about
Ground Fault Circuit
Interrupters
conditions, such as accidental immersion
in water. The ALCI safety device is
equipped with a test button so that its
operation can be checked. This unit
should be tested before each use to con-
firm that the safety device is operational.
2. The dryer is designed to work on ordinary
household current only, 125 volts A.C.,
60 Hz. It is not intended for commercial use.
can save a life!
If you must use your hair dryer in
the bathroom, install a GFCI* now!
Your local electrician can help you decide which
type is best for you–a portable unit that plugs into
the electrical outlet or a permanent unit installed
by your electrician. The National Electrical Code
now requires GFCI’s in bathrooms, garages, and
outdoor outlets of all new homes.
To test:
After plugging in your hair dryer:
3. This appliance is equipped with an automatic
thermal limiter, which will cycle off when over-
heated and come back on when cooled down.
If the unit cycles off, unplug the cord for several
minutes before restarting.
1. Press the reset button on the
ALCI device.
2. Press the test button. The reset button
will pop out. This verifies that the
safety device is operating properly.
Why do you need a GFCI?
3. Press the reset button to reactivate
your ALCI safety device.
4. This appliance has a polarized plug (one
blade is wider than the other). As a safety fea-
ture, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the out-
let, reverse the plug. If it still does not fit, con-
tact a qualified electrician. Do not attempt to
defeat this safety feature.
Electricity and water don’t mix. If your hair dryer
falls in water while it’s plugged in, the electric
shock can kill you– even if the switch is “off.”
A regular fuse or circuit breaker won’t protect
you under these circumstances. A GFCI
offers you greater protection.
4. Your hair dryer is now ready for use.
Note: This unit may automatically trip
when unplugged. If so, the unit must be
reset after it is plugged in. After
following the above testing procedure,
should the indicator device not function
properly, call Remington Customer
Service at 800-736-4648.
A GFCI can save your life!
Compared to that, the price is small!
Don’t wait…
install one now!
*GFCI is a sensitive device that reacts immedi-
ately to a small electric current leak by stopping
the electricity flow.
Download from Www.Somanuals.com. All Manuals Search And Download.
ProAir® Ionic Features
Hair Type
Recommended Settings
BASIC DRYING TECHNIQUES
Low Heat
1. Gently towel dry hair to remove excess water.
Avoid rubbing hair with towel –this creates split
ends and frizziness. Detangle hair with a wide-
toothed comb.
Low Heat
Medium Heat
Medium Heat
High Heat
High Heat
High Heat
1875 Watts
2. Set dryer to a high heat and speed.Remove some
of the additional moisture from your hair by briskly
blow drying it all over, using your fingers to "comb"
through hair.
COOL SHOT
Once you fully dry your hair and fashion the style, press
the cool shot button to “set”the style.
3. When hair is almost dry, lower the heat and speed
settings and begin to style.
4. Divide hair into manageable sections.Begin at the
nape of your neck and brush hair, following the
movement of the brush with the dryer. Continue
working your way up your scalp,then to the sides
and the front,drying small sections at a time.
Air intake
grille
Cool shot
HAIR CARE TIPS
■ Keep the dryer about 8 inches away from your head
to avoid burning scalp or damaging hair.
Heat settings
■ Always keep the dryer pointed down the hair shaft
5. Once your desired style is achieved,push the Cool
Shot button to set the style with a cool flow of air.
Speed settings
to smooth the cuticle and create a silky, shiny style.
■ To help prevent heat damage and add shine,spritz
damp hair with a heat protection spray before blow
drying.
■ To create a style with lots of body, apply volumizing
mousse to towel-dried hair. Distribute it evenly from
roots to ends,then blow dry as usual.Hair will be
soft,shiny and full of volume.
■ For a super smooth,salon-like blow dry, finish by
running a straightening iron over dried hair.
■ For a quick touch-up between shampoos,mist hair
6-foot cord
with
hang loop
FOR STRAIGHT, SMOOTH HAIR
Use a large, round brush or paddle brush to brush hair
from underneath. Pull hair down until the hair is fully
extended and taut. With the dryer on a high heat and
speed, aim the dryer nozzle down the length of the hair.
Repeat with all sections of hair until it is completely
dried. Lock in the style with the Cool Shot button.
• Ionic conditioning
• Ergonomic handle for
comfortable grip
• Separate heat and speed
switches for maximum
styling flexibility
• Safety plug with test
and retest features
for immersion shock
protection
FOR CURLY HAIR
-3 heat settings
-2 speed settings
to dampen it,then style with dryer.
Use dryer on a low heat and speed setting and move
it quickly about your head. As you dry your hair,
scrunch it with your favorite styling product or twirl
strands of hair around your fingers to add definition.
When finished drying,lock in the style with the Cool
Shot button.
• Cool Shot
• 1875 watts
• Aerodynamic design with
high quality finish
• 6-foot cord with
hang loop
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE INSTRUCTIONS
1.Do not attempt to repair the appliance yourself.
2.Keep air intake grille clear of dust accumulation.
See “Cleaning Instructions”below. No other
Full Two-Year Warranty
Remington Products Company, L.L.C. warrants this product
against any defects that are due to faulty material or work-
manship for a two-year period from the original date of con-
sumer purchase. This warranty does not include damage to
the product resulting from accident or misuse.
maintenance or lubrication is required.
3.If the cord becomes twisted due to use,periodically
straighten.Store appliance and cord where they will
not be damaged.Do not wrap cord around dryer.
If the product should become defective within the warranty
period, we will repair it or elect to replace it free of charge.
Please call 800-736-4648.
REMINGTON® SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES.
CLEANING INSTRUCTIONS
This warranty gives you specific legal rights, and you may
also have other rights that vary from state to state. Some
states do not allow the exclusion or limitation of incidental,
special or consequential damages.
1.The ProAir® dryer needs minimum maintenance
to ensure best performance and long life.
2.The air intake grille should be cleaned regularly
since a dirty or clogged grille will impair the
efficiency of the dryer.
®
REMINGTON MONEY-BACK OFFER
If within 30 days after you have purchased your Remington®
dryer, you are not satisfied and would like a refund, take the
dryer and sales slip indicating purchase price and date of
purchase to the retailer from whom the dryer was purchased.
Remington® will reimburse all retailers who accept this item
within 30 days from date of purchase. If you have any
questions concerning the money-back guarantee, please
call 800-736-4648.
3. To clean air intake grille,make sure dryer is turned
off and plug is pulled out of socket.If unit is dirty
wipe clean with a damp cloth.
STORAGE
When not in use,unplug the unit.Allow it to cool,and
store out of reach of children in a safe,dry location.
125 VAC, 60Hz, 1875W
Questions or comments:
Call 800-736-4648 or visit
Never wrap the cord around the appliance,as this will
cause the cord to wear prematurely and break.Handle
cord carefully, and avoid jerking,twisting, or straining
it,especially at plug connections.
Remington and ProAir are trademarks of Remington Products Company, L.L.C.
©2004 R.P.C.,L.L.C.Rev.1.04 Job# WPC03-146 Part# 15155
This product is listed by Underwriters
Laboratories,Inc. and bears the mark.
Remington Products Company, L.L.C.
800-736-4648
MADE IN CHINA
Download from Www.Somanuals.com. All Manuals Search And Download.
|