5.37
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
When using the EFX, always take basic precautions,
including the following:
•
Never leave the EFX unattended when it is plugged in.
Unplug the EFX from the power source when it is not in
use, before cleaning it, and before providing authorized
service.
•
•
Read all instructions before using the EFX. These
instructions are written for your safety and to protect the
unit.
•
•
•
Assemble and operate the EFX on a solid, level surface.
Locate the EFX a few feet from walls or furniture. Keep
the area around the EFX clear.
Before beginning any fitness program, see your
physician for a complete physical examination.
Maintain the EFX in good working condition. Refer to
the Maintenance section. Routinely check and make
sure that all fasteners are secure.
Il est conseillé de subir un examen médical complet
avant d’entreprendre tout programme d’exercise. Si
vous avez des étourdissements ou des faiblesses,
arrêtez les exercices immédiatement.
Use the EFX only for its intended purpose as described
in this manual. Do not use accessory attachments that
are not recommended by the manufacturer, as such
attachments may cause injuries.
To reduce the risk of electrical shock
DANGER
always unplug the EFX from the
electrical outlet immediately after
using and before cleaning.
•
Never operate the unit if it is damaged, not working
properly, when it has been dropped, or has been
immersed in water. Return the EFX to a service center
for examination and repair.
To reduce the risk of burns, fire,
electric shock, or injury, take the
following precautions:
WARNING
•
•
Keep the power cord and plug away from heated
surfaces.
Do not operate the EFX where aerosol (spray) products
are being used or where oxygen is being administered.
•
Do not allow children or those unfamiliar with its
operation on or near the EFX. Do not leave children
unsupervised around the unit.
Owner’s Manual: Important Safety Instructions
1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Do not use outdoors.
•
•
Keep your body and head facing forward. Never attempt
to turn around on the EFX.
Do not attempt to service the EFX yourself except to
follow the maintenance instructions found in this manual.
Never place your hands or feet in the path of the roller
arm because injury may occur to you or damage may
occur to the equipment.
•
•
Never drop or insert objects into any opening. Keep
hands away from moving parts.
•
•
•
Always use the locking pin to secure the foot pedals
when the EFX is not in use.
Keep all electrical components, such as the power
cord and power switch, away from liquids to prevent
shock.
Do not rock the unit. Do not stand on the handrail(s),
display console, or covers.
•
Do not hang anything on the handrails, moving
handlebars, or covers. Place liquids, magazines, and
books in the appropriate receptacles.
Do not overexert yourself or work to exhaustion. If you
feel any pain or abnormal symptoms, stop your workout
immediately and consult your physician.
The EFX must be connected to a
properly grounded outlet. See
Grounding Instructions.
•
When the EFX is not in use, disconnect the unit by
turning the power switch to the Off position, and then
remove the power plug from the wall outlet.
DANGER
•
Wear proper exercise clothing and shoes for your
workout and avoid loose clothing. Do not wear shoes
with heels or leather soles. Check the soles of your
shoes and remove any dirt and embedded stones. Tie
long hair back.
Safety Approval
When identified with the ETL-c logo, the unit has
been tested and conforms to the requirements of
CAN/CSA-E-335-1/3-04, EN 60335-1: 2002 Safety of
Household and Similar Electrical Appliances.
•
•
Use care when getting on or off the EFX. Use the
stationary handrail for stability.
For safety, hold onto a stationary handrail while using
the EFX.
Owner’s Manual: Important Safety Instructions
2
Download from Www.Somanuals.com. All Manuals Search And Download.
120 V Units Designated for U.S. Markets
Grounding Instructions
The grounding plug on the EFX looks like the plug shown in
Diagram 1. The power outlet must have the same
configuration as the plug. No adapter should be used with
this product.
The EFX must be grounded. If the unit malfunctions or
breaks down, grounding provides a path of least resistance
for electric current, which reduces the risk of electrical
shock. The unit is equipped with a power cord having an
equipment-grounding conductor and a grounding plug.
The plug must be inserted into an outlet that is properly
installed and grounded in accordance with all local codes
and ordinances. Failure to properly ground the EFX could
void the Precor Limited Warranty.
Improper connection of the
DANGER
equipment-grounding conductor can
Diagram 1: 120-volt power plug
result in a risk of electric shock. Check
with a qualified electrician or service
person if you are in doubt as to
whether the unit is properly
grounded. Do not modify the plug
provided with the EFX. If it does not
fit the outlet, get a proper outlet
installed by a qualified electrician.
Owner’s Manual: Important Safety Instructions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Canadian Department of Communications
Radio Frequency Interference (RFI)
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian
Department of Communications.
Federal Communications Commission, Part 15
The EFX has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. The EFX generates, uses, and can
radiate radio frequency energy and, if not installed and used
in accordance with the owner’s manual instructions, may
cause harmful interference to radio communications.
Le présent appareil numérique n’émet pas de bruits
radioéélectriques dépassant les limites applicables aux
appareils numériques de la class B prescrites dans le
Règlement sur le brouillage radioélectrique édicté par le
ministére des Communications du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
Per FCC rules, changes or
WARNING
modifications not expressly
approved by Precor could void the
user’s authority to operate the
equipment.
Owner’s Manual: Important Safety Instructions
4
Download from Www.Somanuals.com. All Manuals Search And Download.
European Applications
Obtaining Service
This product conforms to the requirements of the European
Council Directive 2004/108/EC, Electromagnetic
Compatibility and has been tested to the following
standards:
You should not attempt to service the EFX except for
maintenance tasks as described in this manual. The EFX
does not contain any user-serviceable parts that require
lubrication. For information about product operation or
•
EN55022, Limits & Methods of Measurement of Radio
Interference, Information Technology Equipment.
Should you need more information regarding customer
support numbers or a list of Precor authorized service centers,
•
EN50024, Immunity of Information Technology
Equipment
This product is compliant to 2002/95/EC, Restriction of
Hazardous Substances Directive.
For future reference, write the model, serial number, and
date of purchase for your unit in the space provided. The
serial number is printed on a label located beneath the
power receptacle (Diagram 2).
This product also conforms to the requirements of the
European Council Directive 2006/95/EC, Low Voltage
Directive and has been tested to the following standard:
Model #: _______
Serial #: _______________________
•
IEC 335-1, Safety of Household and similar Electrical
Appliances.
Date purchased: _________________________
Serial number
label
Diagram 2: Location of serial number
Owner’s Manual: Important Safety Instructions
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Display Console ..............................................................19
More Information about the Upper Display .................. 20
More Information about the Center Display ................. 21
More Information about the Lower Display .................. 21
................................................................................................ 21
Keypads ............................................................................... 24
Important Safety Instructions .............................1
Safety Approval .....................................................................2
Grounding Instructions ........................................................3
Radio Frequency Interference (RFI) .................................4
European Applications ........................................................5
Obtaining Service .................................................................5
The Locking Pin .....................................................................9
Converting Handlebar Positions .................................... 10
Using the Stationary Handrail ......................................... 11
Moving Handlebars Support the
Adding a User ..................................................................... 31
Updating User Information ............................................... 32
Changing the User Name and
Clearing Workout Statistics ............................................ 33
Total Body Workout .......................................................... 11
Turning the Unit On and Off ............................................ 11
Weight Limit ........................................................................ 11
Location ............................................................................... 12
Workout Options ............................................................34
Choosing QUICKSTART ................................................. 35
Selecting a Program .......................................................... 36
Selecting a USER Key ...................................................... 37
Setting Display Preferences Before Exercising .......... 38
Cooling Down After a Workout ...................................... 38
Pausing During a Workout or the
Heart Rate Features ...................................................... 13
Important Use and Safety Information .......................... 13
Using the Heart Rate
Touch-Sensitive Handrail Grips ..................................... 16
Using SmartRate ................................................................ 16
Exercise to Your Target Heart Rate ............................... 18
Heart Rate Analysis ........................................................... 18
Cool-Down Period ............................................................. 39
Ending a Workout .............................................................. 40
Owner’s Manual: Table of Contents
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Programs .......................................................................... 41
Choosing a Program ......................................................... 41
Program Tips ...................................................................... 42
Manual Program ................................................................. 43
Interval Programs ............................................................... 43
Aerobic Endurance Program ........................................... 44
Hill Climb Program ............................................................ 45
Custom Programs .............................................................. 45
Heart Rate Programs ........................................................ 47
Weight Loss Programs ..................................................... 51
Gluteal Program ................................................................. 52
CrossTrainer Program ...................................................... 52
Advanced Programming and Troubleshooting ......58
Advanced Programming Tips .......................................... 58
Changing EFX Settings .................................................... 59
Informational Displays ....................................................... 61
Troubleshooting Error Codes .......................................... 64
Troubleshooting Heart Rate ............................................ 65
Maintenance ....................................................................66
Inspection ............................................................................ 66
Cleaning the Equipment ................................................... 66
Storing the Chest Strap ................................................... 67
Long-Term Storage ............................................................ 67
Precor Residential Equipment
Limited Warranty.................................................. 68
Exercise Session ............................................................ 53
Exercise Session Tips ....................................................... 53
Changing Programs in Mid-session .............................. 53
Changing the Workout Time ........................................... 54
Adjusting Program Goals ................................................. 55
Changing Your Workout Display Options ................... 55
Changing the Units of Measure Display ....................... 57
Adjusting Your Target Heart Rate .................................. 57
Owner’s Manual: Table of Contents
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Owner’s Manual: Table of Contents
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EFX Features
The EFX is equipped with certain items that, when used
properly, help sustain a safe and enjoyable workout. These
items include:
After exercising, use the locking pin to secure the foot
pedals.
•
•
•
•
•
Locking pin location
Convertible handlebars
Stationary handrails with heart rate feature
Moving handlebars
Roller arm
Power switch location
Locking
pin
Important: Before exercising, review the Important Safety
Instructions found at the beginning of this manual.
Diagram 3: Remove locking pin before exercising
The Locking Pin
Storage location
Lanyard
Ramp
CAUTION: Always use the locking pin to secure the foot
pedals when the EFX is not in use.
The locking pin secures the foot pedals to keep them from
traveling up or down the ramp. Before beginning your
workout, pull firmly on the pin to slide it out of the roller arm.
Refer to Diagram 3. A lanyard attaches the locking pin to the
ramp.
Store the locking pin underneath the ramp once it is removed
from the roller arm. Refer to Diagram 4.
Diagram 4: Store the locking pin under the ramp
Owner’s Manual: EFX Features
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The following steps explain how to convert the handlebars
from a Lower Body to a Total Body position or vice versa.
Converting Handlebar Positions
The EFX5.37 handlebars can be locked in either a stationary
(Lower Body) or moving arm (Total Body) position
1. Hold the link arm securely with one hand as you press the
button on the quick release pin with your thumb. Pull the
quick release pin out of its receiver.
depending on your exercise preference. Refer to Diagram 5.
CAUTION: Never attempt to change the handlebar
connection when the EFX is in use.
2. Rotate the link arm 90° so the quick release pin is aligned
with the other receiver. For example, the locking receiver
for the Total Body handlebars is beneath the foot pedal. If
you wish to lock the handlebars in the Lower Body
position the locking receiver is on the base frame just in
front of the rear cover.
Receiver for Total Body is
located on the foot pedal.
CAUTION: Be aware of handlebar movement. If you
move the link arm, it also causes the handlebar to
move. Do not drop the link arm. Dropping the link arm
may chip the paint on the EFX. To avoid injury to you or
your assistants, be aware of the location of the
handlebars during the conversion process.
Receiver label
Rear covers
3. Press the button on the quick release pin and slide the
pin into the appropriate receiver.
Receiver for
Lower Body is
located on the
base
4. Let go of the button and make sure the link arm is
securely locked into position by pushing and pulling it
firmly.
frame.
5. Perform the same steps for the opposite handlebar.
Receiver label
CAUTION: Make sure the quick release pin is fully
engaged in the receiver and locked in position before
using the EFX.
Diagram 5: Converting the handlebars
Owner’s Manual: EFX Features
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Stationary Handrail
To maintain your balance, always grasp a stationary handrail
when you step on or off the foot pedals, and when you use
the keypad.
Turning the Unit On and Off
To turn the unit On and Off, use the power switch located at
the rear of the unit, near the power cord receptacle. Refer to
Diagram 6.
To learn more about the touch-sensitive handrail grips, refer
Important: When it is not being used, turn the unit Off.
to Heart Rate Features.
Moving Handlebars Support the Total
Body Workout
The handlebars on the EFX5.37 provide an upper-body
workout which helps increase cardiovascular fitness. By
adding the total body movement to your cross training
workout, you are actually increasing your work effort and
enhancing your overall fitness level.
Power switch
Diagram 6: Power switch
Weight Limit
The equipment has been durability tested to 350 lb.
(160 kg).
Owner’s Manual: EFX Features
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Location
It is important to keep a minimum of one foot (30 cm) around
the EFX open and free from encumbrances such as other
equipment.
CAUTION: If you plan to move the EFX, obtain help and
use proper lifting techniques.
To move the EFX, the two of you need to stand on opposite
sides and face the rear of the EFX. Follow the appropriate
steps for the EFX you own.
1. Lock the handlebars in the Lower Body position. Refer to
the labels on the base of the EFX and to the instructions
found in Converting Handlebar Positions.
2. Determine a comfortable height for lifting and have your
assistant grasp one handlebar while you grasp the
opposite one.
3. Lift the EFX and roll it on the rear rollers to the desired
location.
Owner’s Manual: EFX Features
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Features
Important Use and Safety Information
CALORIES
HEART RATE
Read the following before using the heart rate or SmartRate
features.
5.37
109
SmartRate
•
•
Consult your physician before engaging in any vigorous
exercise. Do not use the heart rate programs until
authorized by your physician.
WARMUP
FATBURN
CARDIO
PEAK HIGH
Heart rate and SmartRate® features are available when
you wear the chest strap or grasp both touch-sensitive
handrail grips. When a heartbeat is detected, the HEART
RATE display shows your heart rate and, if your age has
been entered, the SmartRate LED pulses and indicates your
target zone.
Know your heart rate and your physician-recommended
heart rate target zone. Individual heart rates vary
according to several physiological factors and may not
correspond directly with Diagram 7.
Owner’s Manual: Heart Rate Features
13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The calculation used for the heart rate target zone is:
(220 minus your age) multiplied by a percent.
•
•
After you put on the chest strap, face the display console
for a few seconds. This allows the receiver in the console
to recognize the signal from the chest strap.
For example:
Low range: (220 minus your age) multiplied by 55%
If Hr appears in the display, the EFX is detecting a signal,
but has not yet determined your heart rate. Make sure the
chest strap is positioned properly around your chest and
against your skin.
High range: (220 minus your age) multiplied by 85%
Refer to Table 1 in Using SmartRate.
•
•
If you prefer to use the touch-sensitive handrail grips,
grasp both grips and wait five to ten seconds. Make sure
both hands are moist.
Heart Rate Target Zones
200
190
180
Note: When a signal is detected, the heart rate icon
flashes and a number appears in the HEART RATE
display and indicates your heart rate.
High
170
160
150
140
130
Always face forward on the EFX and use the stationary
handrail for balance. Keep upper body movement to a
minimum.
Peak
120
Cardio
110
100
90
Fat Burn
80
Warmup
70
20 25 30 35 40 45 50 55 60 65 70 75
Your Age
Diagram 7: Heart rate target zones
Owner’s Manual: Heart Rate Features
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Adjust the strap and fasten it around your chest. The strap
should feel snug, not restrictive. Refer to Diagram 9.
Wearing a Chest Strap
During a workout, the heart rate features appear on the
display when you wear a chest strap. To receive an accurate
reading, the chest strap needs to be in direct contact with
your skin.
1. Carefully dampen the back of the strap with tap water
Refer to Diagram 8.
Diagram 9: Adjust chest strap
Note: Do not use deionized water. It does not have the
proper minerals and salts to conduct electrical impulses.
3. Make sure that the chest strap is right side up, lies
horizontally across your chest, and is centered in the
middle of your chest. Refer to Diagram 10.
Diagram 8: Moisten chest strap
Diagram 10: Fasten chest strap
After you put on the chest strap, face the display console for
a few seconds. This allows the receiver in the console to
recognize the signal from the chest strap.
Owner’s Manual: Heart Rate Features
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Usually, the concentration of salts in a person’s perspiration
provides enough conductivity to transmit a signal to the
receiver inside the display console. However, some people,
because of body chemistry or erratic heart beats cannot use
the touch-sensitive heart rate feature on the EFX. A chest
strap may provide better results.
Using the Heart Rate
Touch-Sensitive Handrail Grips
While exercising, you must grasp both touch-sensitive
handrail grips for a minimum of five to ten seconds to
transmit your heart rate to the display. Refer to Diagram 11.
Important: While exercising, do not grasp the touch-
sensitive handrail grips and wear the chest strap at the
same time. The touch-sensitive handrail grips override the
signals from the chest strap transmitter. If used together,
inconsistent readings may occur.
Using SmartRate
The SmartRate feature helps you monitor and maintain your
heart rate in the target zone best suited to your specific
needs. All 10 LEDs may light during a workout. When the
EFX detects a heart rate, a single LED blinks and indicates
the zone that your heart rate is in.
Touch-sensitive
handrail grips
Important: To use the SmartRate feature, you must enter
your age during the setup phase of your exercise session.
The 10 LEDs in the SmartRate display are color-coded. A
pulsating orange LED indicates you are outside the
recommended heart rate target zone. Green LEDs indicate
when you are exercising within the recommended fat burn or
cardio fitness zones.
Diagram 11: Touch-sensitive handrail grips
Owner’s Manual: Heart Rate Features
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 1. Heart rate target zones and SmartRate LEDs
Table 1 shows the percents used in calculating the heart rate
target zones. While your heart rate remains within these
zones, the corresponding lights blink and provide a visual cue.
Heart Rate Zone
Percent
Below 50
50 to 54
55 to 59
60 to 64
65 to 69
70 to 74
75 to 79
80 to 84
85 to 87
Above 87
LED Lit
First
LED Blinking Label
The calculation used to determine your maximum aerobic heart
rate is (220 minus your age). When you multiply it by the
percent indicated in Table 1, you can understand the relation-
ship between the pulsating LED and your target heart rate.
Orange
Orange
Green
Green
Green
Green
Green
Green
Orange
Orange
WARMUP
Second
Third
WARMUP
FATBURN
FATBURN
FATBURN
CARDIO
CARDIO
CARDIO
PEAK
Fourth
Fifth
CAUTION: Your heart rate should never exceed 85% of
your maximum aerobic heart rate or go above PEAK. If it
does, immediately reduce your strides per minute, adjust
the CrossRamp, or resistance to return your heart rate to
your physician-recommended target zone.
Sixth
Seventh
Eighth
Ninth
Tenth
HIGH
The SmartRate indicator lights do not appear when:
•
•
•
•
You press QUICKSTART at the banner.
You do not enter your age before starting a program.
You do not wear or improperly position the chest strap.
You fail to grasp both touch-sensitive handrail grips for
five to ten seconds.
Owner’s Manual: Heart Rate Features
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Exercise to Your Target Heart Rate
Heart Rate Analysis
Every time you complete a program using the chest strap or
touch-sensitive handrail grips, the EFX provides a heart rate
analysis after the workout summary.
A dedicated window displays your heart rate while
exercising. To view your heart rate (beats per minute) on the
display, either wear a chest strap or grasp both touch-
sensitive handrail grips.
Your average heart rate appears followed by the maximum
heart rate achieved during your workout. A third display
appears, if you entered your age, and indicates the amount of
time your heart rate remained between the target zones
shown.
suggestions for workouts with varying levels of intensity. It
provides many workout details that include the appropriate
target heart rate.
The EFX includes a program that lets you exercise based on
a specified target heart rate. As you exercise, the Basic HRC
Program monitors your heart rate and automatically
maintains it within a few beats per minute (bpm) of your
selected target.
The heart rate analysis is based on how often your heart rate
signal is received while exercising. If you use the chest strap,
the average heart rate will be more accurate than if you
occasionally grasp the touch-sensitive handrail grips.
To use this program, press the PROGRAMS - HEART RATE
key. For more information, refer to Programs.
Owner’s Manual: Heart Rate Features
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Console
Upper display: Initially shows the Precor banner. It changes
to the program profile when you select a program or press
QUICKSTART. A blinking column in the profile indicates your
position. The smaller CALORIES and HEART RATE displays
show your calorie expenditure and pulse.
SmartRate display: LEDs light in this column when the
SmartRate feature is activated. Follow the LEDs to monitor your
heart rate and maintain it in your target zone.
DATA
Number keys: During an exercise
HEART
RATE
session, use the number keys to answer
prompts and update information.
PROGRAMS keypad: To begin an
exercise session, press a PROGRAMS
key to view a menu of programs within
each category. For program
MANUAL
5.37
INTERVAL
VARIETY
WEIGHT LOSS
WARMUP
FATBURN
CARDIO
PEAK HIGH
PERFORMANCE
descriptions, refer to Programs.
Before beginning any fitness
program, see your physician for thorough physical
examination. Seek advice from your physician to learn the
target heart rate appropriate for your fitness level. Do not allow
children or those unfamiliar with its operation on or near this
a
equipment. Read the product owner's manual or consult
a
qualified instructor before operating this equipment. Improper
use of this equipment can result in serious injury. If you feel
pain, faintness, or dizziness, stop exercising immediately.
Center display
USER 1—4: Press a USER key at the
Precor banner to personalize your
exercise experience. The information is
stored for future exercise sessions.
OK and Navigational arrow keys: Use
the OK key to confirm responses to
specific prompts. The up and down arrow
keys present the available selections and
affect what appears on the display. Refer
to the Navigational Keypad.
RESET
Copyright 2007 Precor Incorporated en
TIME ELAPSED
TIME REMAINING
TOTAL STRIDES
STRIDES/min
Selection key: Press the key to move
through the information in the column, so
you can choose what you want to display
during your session. Indicator lights
appear next to the item that is displayed.
You can perform the same function with
the right selection key.
VERTICAL GAIN
Lower display: While you exercise, six
sets of numbers show information
about your session. Refer to More
Information about the Lower Display
QUICK
START
CROSSRAMP arrow keys: Use the
arrow keys to adjust the ramp incline.
RESISTANCE arrow keys: Use the arrow keys
to adjust the resistance.
Owner’s Manual: Display Console
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HEART RATE—displays your heart rate when you wear a
Heart Rate Features.
More Information about the Upper
Display
PROGRAM PROFILE—In most programs, the CrossRamp
setting affects the column height in the program profile as
shown in Diagram 12. The profile raises or lowers according
to which arrow key is pressed.
5.37
WARMUP
FATBURN
CARDIO
PEAK HIGH
Column height
CrossRamp settings
19 — 20
17 — 18
15 — 16
13 — 14
11 — 12
9 — 10
7 — 8
CALORIES—displays the estimated cumulative number of
calories burned. The calorie calculation is derived from the
pedaling speed, resistance, and your weight. An accurate
weight entry results in a more accurate calorie count. When
using QUICKSTART and a weight has not been specified,
the default weight is 150 pounds (68 kilograms).
5 — 6
3 — 4
1 — 2
SmartRate—displays your heart rate as a blinking bar which
indicates the zone you are in when you wear a chest strap or
grasp both touch-sensitive grips. Refer to Using SmartRate.
Diagram 12: Column height in the program profile
Owner’s Manual: Display Console
20
Download from Www.Somanuals.com. All Manuals Search And Download.
More Information about the
Center Display
More Information about the
Lower Display
5.37
WARMUP
FATBURN
CARDIO
PEAK HIGH
TIME ELAPSED
TOTAL STRIDES
STRIDES/min
TIME REMAINING
VERTICAL GAIN
QUICK
START
session. The two center windows automatically provide
information about your CrossRamp and resistance settings.
To choose the type of information displayed in the left and
right windows, press the adjacent Selection key. The
numbers that appear relate to your workout statistics and are
described below.
The center display presents the program name when you
select a program. During an exercise session, the center
display becomes a message bar showing additional
information depending on user selections and program
interludes. For more information about the selections that
can appear in the center display, refer to Changing Your
Workout Display Options.
Note: If you choose to rest a book or magazine on the
display, you can still view these workout statistics.
Owner’s Manual: Display Console
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME ELAPSED and TIME REMAINING
CROSSRAMP
TIME ELAPSED—displays workout time in minutes and
seconds and indicates the amount of time you have been
exercising. When you exceed 60 minutes during a single
workout, the TIME ELAPSED display converts to hours and
minutes.
CROSSRAMP—displays the incremental motion affected by
the ramp position. The CROSSRAMP arrow keys affect the
lift and let you set a ramp incline between 1 and 20. The
value displayed can change in whole number increments.
RESISTANCE
TIME REMAINING—shows the amount of time remaining in
a workout. If the selected workout time is less than 60
minutes, the display shows time in minutes and seconds. If
you select a workout time greater than 60 minutes, the
display reflects hours and minutes until the countdown
reaches 60 minutes, at which time the display reverts to
minutes and seconds.
RESISTANCE—displays the resistance you feel against your
stride. The RESISTANCE arrow keys let you set a resistance
level between 1 and 20.
Owner’s Manual: Display Console
22
Download from Www.Somanuals.com. All Manuals Search And Download.
VERTICAL GAIN—displays an estimate of your cumulative
vertical gain in feet or meters based on your CrossRamp
level, resistance level, weight, and caloric expenditure. You
can use the VERTICAL GAIN display as a unique
motivational unit of measurement and realize your fitness
goals by varying the elliptical motion of the EFX. Higher
CrossRamp and resistance levels will result in greater
vertical gain.
TOTAL STRIDES, STRIDES/min and VERTICAL
GAIN
TOTAL STRIDES—shows the total number of strides
completed, which is always an even number since two
strides create one complete revolution of the flywheel. A
stride is an exaggerated walking movement. On the EFX, if
you start in a position with one foot pedal forward, a stride is
completed when you move the rear foot pedal all the way
forward while the other foot pedal moves to the rear.
STRIDES/min—displays the number of strides you
complete in a minute up to a maximum value of 510 strides
per minute. A stride is an exaggerated walking movement. If
you start in a position with one foot plate forward, a stride is
completed when you move the rear foot pedal all the way
forward while the other foot plate moves to the rear. Two
strides create one complete revolution of the flywheel. So,
the value that appears on the display is always an even
number between 20 and 510. The average, effective pace is
between 100 to 150 strides per minute.
Owner’s Manual: Display Console
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Lower Display Keypad and the Selection Keys
Keypads
Use the keypads to enter your workout session selections, to
affect what appears on the display, and to establish your
CrossRamp and resistance preferences.
TIME ELAPSED
TOTAL STRIDES
STRIDES/min
TIME REMAINING
VERTICAL GAIN
Five distinct keypads exist on the display and are discussed
in this section:
•
•
•
•
•
Lower Display keypad and the Selection keys
User identification keys
QUICK
START
Navigational keypad in the center of the display
PROGRAMS keypad
Number keypad with the ENTER and CLEAR keys
Diagram 13: Lower Display keypad and the Selection keys
Left Selection Key: Every time you press this key the
the display toggles between the amount of time
elapsed since you began your exercise session, or it
shows the time remaining. An LED lights and indicates
which information is being displayed. The TIME
REMAINING display is lit when you begin a program.
Owner’s Manual: Display Console
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CROSSRAMP: Press and hold the CROSSRAMP
arrow keys to increase or decrease the ramp incline
from 1 to 20.
The CrossRamp has an auto-leveling feature and
returns to the number 1 setting each time you return to
the Precor banner or turn the EFX off, and then on. To
adjust the level so the CrossRamp automatically returns
to a higher CrossRamp setting, refer to Changing EFX
Settings.
Changes to the ramp incline are not immediate. It takes
time for the lift to reach the target incline shown on the
display.
workout immediately using the Manual Program. Refer
to Choosing QUICKSTART.
Ramp changes occur only when the foot pedals are in
motion. The number that appears on the display
indicates the selected CrossRamp setting, not the
degree of incline. There is not a one-to-one relationship
between the degree of incline and the CrossRamp
setting. Refer to Table 2. It provides an approximation of
the relationship between the CrossRamp setting and
the degree of incline.
RESISTANCE: Press and hold the RESISTANCE
arrow keys to increase or decrease the resistance in
from 1 to 20.
Right Selection Key: Every time you press this key the
display reflects your cumulative strides, your strides per
minute, or your vertical gain. An LED lights and
indicates which information is being displayed.
Table 2. Relationship between CrossRamp setting and
degree of incline
CrossRamp Setting
Degree of Incline
1
13°
20°
27°
34°
40°
6
11
16
20
The CrossRamp setting affects the column height in the
program profile. Refer to Diagram 12.
Owner’s Manual: Display Console
25
Download from Www.Somanuals.com. All Manuals Search And Download.
USER Keys
Navigational Keypad
RESET
Diagram 15: Navigational keypad
Diagram 14: USER keys
The navigational keypad provides several ways to change
your exercise session and to display various workout
selections, is also part of the navigational keypad.
USER Keys: To personalize your exercise session, press a
USER key (1 through 4) at the Precor banner. Selecting a
USER key lets you track your workout statistics from session
to session. When you choose a USER key, personal
information such as age, weight, and gender are reinstated
after you select your preferred program. If you haven’t
already done so, you’ll need to select a user number and
enter a user name. For more information, refer to Adding a
User or Selecting a USER Key.
TIME +/-: You can change the workout time while you
are exercising, by pressing the TIME +/– key. A blinking
number appears in the center display. You can change
the number using the navigational arrow keys or enter a
Changing the Workout Time.
Owner’s Manual: Display Console
26
Download from Www.Somanuals.com. All Manuals Search And Download.
GOAL: Press the GOAL key to set exercise session
goals: time, horizontal distance (miles/kilometers), or
calories. You can set your preferences once you are
already engaged in an exercise program. Refer to
Adjusting Program Goals.
OPTIONS: The OPTIONS key is a multi-functional key.
You can set your preferences for units of measure and
target heart rate prior to selecting a program or when
you are using a program. Refer to Setting Display
Heart Rate.
Up and Down Arrows: These up and down arrows
present the available selections and affect what
appears on the display.
RESET: During an exercise session, press RESET
once to end your session and display a workout
summary. Press it again to return to the Precor banner.
Refer to Pausing During a Workout or the Cool-Down
Period.
OK: Use the OK key to confirm responses to specific
prompts.
METRICS: The METRICS key is a multi-functional key.
It lets you customize the center display while exercising.
item from the list or choose SHOW ALL, which causes
a variety of scrolling statistics such as, SEGMENT
TIME REMAINING to appear in the center display. To
review the list, refer to Changing Your Workout Display
Options.
Owner’s Manual: Display Console
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3. Available programs
PROGRAMS Keypad
PROGRAMS key
MANUAL
Menu Selections
Manual
INTERVAL
1—1 Interval
1—2 Interval
1—3 Interval
Aerobic Endurance
Hill Climb
HEART
RATE
MANUAL
VARIETY
INTERVAL
VARIETY
WEIGHT LOSS
1 Custom†
2 Custom†
PERFORMANCE
HEART RATE
Basic HRC*
Fitness Test*
Fat Burner
Diagram 16: PROGRAMS keypad
WEIGHT LOSS
The PROGRAMS keypad provides access to all the exercise
programs. Choose one of the six keys by pressing in the
center of the key and the top level program in the menu
appears on the display. Pressing the key again displays the
next program in the menu, if one is available. Refer to 3. For a
description of each program, refer to Programs.
Calorie Goal
Weight Loss Interval
Gluteal
PERFORMANCE
CrossTrainer
* Use of chest strap or the touch-sensitive handrail grips is required.
Appears when you select a USER key.
†
Note: Use the OK key to confirm your selection. For more
information, refer to Workout Options.
Owner’s Manual: Display Console
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Number Keypad
DATA
Diagram 17: Number keypad
The CLEAR and ENTER keys provide the following
functions:
CLEAR: Use the CLEAR key to remove the last number
being displayed.
ENTER: Use the ENTER key to accept the number being
displayed.
Note: The OK and ENTER keys are interchangeable and
provide the same function when no peripheral devices are
attached to the EFX.
Owner’s Manual: Display Console
29
Download from Www.Somanuals.com. All Manuals Search And Download.
User Identification
Choosing a user identification (USER) key enables the EFX
to identify you and track your cumulative workout statistics.
Once you configure your USER key, you can personalize
your workout session and store information about your
preferred program, workout time, weight, age, and gender.
This section explains how to:
•
•
•
Update your personal information.
Change the user name and clear your workout statistics.
The USER keys allow four people to customize, store, and
retrieve workout selections. Two custom programs are also
available when you choose a USER key. The custom
programs record your CrossRamp settings as you exercise.
Initially, you must “add a user” so the EFX can store exercise
session information associated with the specific USER key.
Once you enter the requested information, it is stored until
you opt to change it. You can select the same USER key
time and time again, and your user preferences will
automatically be re-instated. Refer to Adding a User.
Owner’s Manual: User Identification
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4. When you are satisfied with your name or user
identification, press OK.
Adding a User
5. The display then prompts you to enter your weight, age,
and gender.
Use the navigational arrow keys or number keys to
answer each prompt, and then press OK. With each
successful entry, you move onto the next prompt. After
you enter the gender type, the display indicates that the
user setup is complete and resets to the Precor banner.
To begin an exercise session using your USER key, refer
to Selecting a USER Key.
To add a user, select a user number by taking the following
steps:
1. At the Precor banner, press a USER key. A blinking line
prompts you to enter the first letter in your name.
2. Use the alphabet, on the number keypad, to enter your
name. To enter a letter, press the appropriate number key
repeatedly until the desired letter appears. To erase a
letter, press the CLEAR key.
3. Wait until the next cell blinks and continue the process
until your name or identification is complete.
Note: Blank spaces between letters are not allowed.
Owner’s Manual: User Identification
31
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Answer the prompts for weight, age, and gender.
Updating User Information
Use the navigational arrow keys or number keys to
answer each prompt, and then press OK. With each
successful entry, you move onto the next prompt.
4. At the CLEAR [user name] STATISTICS? prompt,
choose one of the following options:
1 = No
Pressing number 1 updates user
information only. The program
preferences and cumulative workout
statistics remain intact.
To update user information such as weight and age without
clearing the workout statistics associated with a USER, take
the following steps:
2 = Yes
Pressing number 2 updates user
information, but deletes program
preferences and cumulative workout
Name and Clearing Workout Statistics.
1. At the Precor banner, press and hold the USER key. A
welcome greeting scrolls across the display.
Continue holding the USER key until CHANGE USER
[user number]? USER [x] SETUP scrolls across the
display. Release the USER key, and then press OK.
2. When your user name appears, do not change it. Accept
it as is by pressing OK.
Important: If you change your user name, you also
delete all cumulative workout statistics associated with
the user name. Refer to Changing the User Name and
Clearing Workout Statistics.
Owner’s Manual: User Identification
32
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Use the alphabet, on the number keypad, to enter a new
name. To enter a letter, press the appropriate number key
repeatedly until the desired letter appears. To erase a
letter, press the CLEAR key.
Changing the User Name and Clearing
Workout Statistics
4. A blinking space or letter indicates it is ready to receive a
new letter. Wait until the next cell blinks and continue the
process until your name or user identification is complete.
Note: Blank spaces between letters are not allowed.
5. When you are satisfied with your name or user
identification, press OK.
You can clear the stored workout statistics for any USER key
by changing the name associated with a USER key.
Changing the user name resets workout goal, weight, age,
and gender preferences to the original factory defaults. The
cumulative goal statistics are reset to zero. The metrics
displayed are reset to factory defaults.
6. The display then prompts you to enter your weight, age,
and gender.
Use the navigational arrow keys or number keys to
answer each prompt, and then press OK. With each
successful entry, you move onto the next prompt. After
you enter the gender type, the display indicates that the
user setup is complete and resets to the Precor banner.
1. At the Precor banner, press and hold the USER key while
the welcome greeting scrolls across the display.
Note: Preferences and workout statistics are cleared and
all programs are restored to original default settings.
Continue holding the USER key until CHANGE USER
[user number]? scrolls across the display. Release the
USER key, and then press OK.
2. When your user name appears, a blinking line prompts
you to change the first letter.
Owner’s Manual: User Identification
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Workout Options
CAUTION: Before beginning any fitness program, see your
physician for a complete physical examination. Know your
physician-recommended heart rate target zone.
5. Select one of the following options:
Option...
Steps...
1. Determine whether you want Total Body or Lower Body
handlebars and lock the link arms to the appropriate
position. Refer to Converting Handlebar Positions.
To start exercising
immediately
Use the QUICKSTART key.
Refer to Choosing
QUICKSTART.
CAUTION: Make sure the link arm is securely locked in
place before using the EFX.
To view a list of
programs
Press a PROGRAMS key.
Refer to Selecting a Program.
2. Turn the unit On. The Precor banner scrolls across the
display.
To begin exercising Press your USER key.
using personal
preferences
Refer to Selecting a USER
Key.
3. Hold on to a stationary handrail while stepping on the
foot pedals.
4. Face the display. When you are comfortably situated,
begin pedaling.
Owner’s Manual: Workout Options
34
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use the CROSSRAMP and RESISTANCE arrow keys to
change the ramp incline and resistance.
Choosing QUICKSTART
3. Find a comfortable stride rate between 100 and 150
strides per minute.
To use the SmartRate feature, you need to specify your
age. In this case, review the steps found in Adding a User
or Selecting a Program.
QUICK
STA
Note: When you use the QUICKSTART key, you enter
the MANUAL program as a guest user. Workout statistics
and your preferences for weight, age, and gender are not
stored in memory. To save this type of information, refer to
Selecting a USER Key.
1. While the Precor banner scrolls, start pedaling and press
QUICKSTART to begin the Manual Program.
QUICKSTART applies the following defaults:
Prompts
Program
Time
Default Value
Manual
30 minutes
Weight
150 lb (68 kg)
Age
0
1
1
CrossRamp
Resistance
Owner’s Manual: Workout Options
35
Download from Www.Somanuals.com. All Manuals Search And Download.
If you choose a calorie-goal program, you will prompted
for a calorie goal, not a workout time. You can adjust the
calories using the number keypad.
Selecting a Program
3. Enter your weight (1—350) and then your age (1—99).
HEART
MANUAL
Note: To change a value (program, weight, or age) that
you have already entered press RESET to return to the
Precor banner. Select a program and reenter the
appropriate values.
INTERVAL
VARIETY
WEIGHT LOSS
PERFORMANCE
4. Hold onto a handrail. The ramp automatically changes to
1. While the Precor banner scrolls, repeatedly press one of
the PROGRAMS menu keys to review its list of
5. To change a value (program, time, weight, or age) that
you have already entered, press RESET and reenter the
information. To change the workout time, press the
TIME +/- key.
programs. Choose the program you want, and then press
OK. For a description of each program, refer to Programs
or review Table 3 with the PROGRAMS Keypad.
Note: When you select a program without an identifying
USER key, you enter the program as a guest user.
Cumulative workout statistics and your preferences for
weight, age, and gender are not stored in memory. To
save this type of information, refer to Selecting a USER
Key.
Note: After pressing a program menu key, you can also
scroll through the list of programs within that menu by
pressing the navigational arrow keys.
2. A workout time blinks in the center display if you choose
a time-based program. Enter a number between 1—240
minutes or zero (NO LIMIT) by using the navigational
arrow keys or the number keys, and then press OK.
6. Use the CROSSRAMP and RESISTANCE arrow keys to
change the ramp incline and resistance.
Note: To review the NO LIMIT option or to adjust your
workout time using the TIME+/- key while exercising,
refer to Changing the Workout Time.
7. Find a comfortable stride rate between 100 and 150
strides per minute.
Owner’s Manual: Workout Options
36
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press OK to select the program being displayed or
choose another program using the PROGRAMS keypad.
Refer to Selecting a Program for information about how
to choose a program.
Selecting a USER Key
Important: If you make an entry error, press RESET to
return to the Precor banner.
3. The display prompts you for a workout time. To adjust the
time, use the number keypad or the navigational arrow
keys. To accept the number appearing on the display,
press OK.
To start your exercise session using personal identification
and preferences set up in Adding a User, take the following
steps:
4. Begin pedaling.
5. Use the CROSSRAMP and RESISTANCE arrow keys to
change the ramp incline and resistance.
1. At the Precor banner, press the same USER key you
designated in step 1, Adding a User.
6. Find a comfortable stride rate between 100 and 150
strides per minute.
Note: Refer to User Identification if you have not
previously chosen a USER key.
A welcome greeting scrolls across the display and the
last program associated with the USER key appears.
User preferences such as weight, age, gender and goal
type are reinstated.
The time, distance, or calories goal associated with the
displayed program also applies.
Owner’s Manual: Workout Options
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Display Preferences Before
Exercising
While the Precor banner scrolls, you have the opportunity to
change what units of measure appear.
Cooling Down After a Workout
Incorporate a cool-down period into your workout to help
lower your heart rate and minimize muscle stiffness or
soreness.
Note: You cannot switch to a different program or goal type,
or change display options during the cool-down period. To
alter the cool-down period time limit, refer to Setting a Cool-
Down Time Limit.
1. As the Precor banner scrolls, press OPTIONS.
2. UNITS appear on the display. Press OK to select it.
3. Press the up or down arrow keys to toggle between U.S.
or METRIC.
When you complete a program with a time limit or specified
goal, you automatically enter a cool-down period. The
CrossRamp remains at the program setting while the
resistance is reduced by 20%. To readjust the CrossRamp or
resistance, press the arrow keys. To lower your heart rate,
reduce your strides per minute. View your target heart rate
using the METRICS key. Refer to Exercise to Your Target
4. When you are ready, press OK to accept the displayed
selection and return to the Precor banner. To return to the
Precor banner without saving changes, press RESET.
Heart Rate
.
Note: Your target heart rate requires an age entry during the
setup prompts.
A workout summary appears at the end of the cool-down
period. Refer to Ending a Workout.
Important: If you exit a program before completing it, the
cool-down period is bypassed.
Owner’s Manual: Workout Options
38
Download from Www.Somanuals.com. All Manuals Search And Download.
To prematurely end the cool-down period, do the following:
1. Grasp a stationary handrail with one hand.
Pausing During a Workout or the
Cool-Down Period
Stop pedaling to pause anytime during a workout or during a
cool-down period. The pause mode has a default time limit of
10 minutes. If you do not resume exercising during that time,
the display returns to the banner.
2. Press RESET to view the workout summary.
3. Press RESET again to return to the Precor banner.
Important: Hold on to a stationary handrail. Step off the
EFX when the lift has stopped moving.
Note: You can change the pause time limit by following the
instructions found in Changing EFX Settings.
1. To pause, stop pedaling.
The center display indicates the amount of time remaining
in pause mode.
2. To resume exercising from pause mode, begin pedaling.
When you pause a program, you can change your program
selection or display options. Refer to Changing Programs in
Mid-session and Changing Your Workout Display Options.
Note: While paused during the cool-down period, you
cannot change to another program.
Owner’s Manual: Workout Options
39
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Turn Off the EFX and lock the foot pedals in place with
the locking pin.
Ending a Workout
CAUTION: Hold on to a stationary handrail when you near
the end of your exercise session.
Important: Never leave children unsupervised around the
EFX. Always turn Off and unplug the EFX when it is not in
use. Lock the foot pedals in place with the locking pin.
1. Slow your pedaling when you complete the cool-down
period.
The workout summary shows your cumulative workout
statistics including warm-up and cool-down periods. Use the
right selection key to display workout statistics, such as
TOTAL STRIDES or VERTICAL GAIN. You can review your
workout statistics for ten minutes before the display
automatically resets to the Precor banner.
Cumulative statistics in time, calories, total strides, vertical
gain, and horizontal distance appear if you have been
accessing programs through a USER key.
A fitness score, associated with your fitness category,
appears when you take the Fitness Test.
A heart rate analysis also appears, if you held onto the touch-
sensitive handrail grips or wore a chest strap while
exercising. Refer to Heart Rate Analysis.
2. To return to the Precor banner before the 10 minutes
elapse, press the RESET key.
Owner’s Manual: Workout Options
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Programs
This section describes the programs available on the EFX.
Use this section as a reference tool to better understand
each program’s purpose. For more information, refer to
Selecting a Program.
Choosing a Program
Choosing a program depends on your goals. If you are a
beginner or returning to regular exercise, you can start a
cardio-conditioning program to slowly return your body to a
comfortable level of exercise. If you have been exercising and
feel that you have an intermediate or advanced fitness level,
you probably have established goals. The Precor web site
workouts and advice from the experts.
The program descriptions are presented in menu selection
order. To see a list of programs, refer to PROGRAMS
Keypad and Table 3.
Several exercise choices on the EFX are pre-programmed
with recommendations for CrossRamp, resistance and
alternating interval levels. You always have the option to
override the suggested levels with the exception of the Basic
HRC and Fitness Test.
Owner’s Manual: Programs
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Tips
• Begin at the Precor banner. Refer to Workout Options.
through a program.
Pausing During a Workout or the Cool-Down Period.
• When you complete a program that contains a time or
calorie goal, the automatic cool-down period begins.
Refer to Cooling Down After a Workout.
• Prior to choosing a program, you may press the
OPTIONS key to access units of measure and target
heart rate settings. Refer to Setting Display Preferences
Before Exercising.
• To use the SmartRate feature, you need to specify your
age and wear a chest strap or hold on to the touch-
sensitive handrail grips. Refer to Using SmartRate.
• Default time limits exist for the cool-down period and
pause mode. Refer to Changing EFX Settings if you wish
to adjust the settings.
• Cumulative workout statistics appear when you end your
exercise session. Refer to Ending a Workout.
• To exercise indefinitely in any program (except preset
programs, such as the Fitness Test, Fat Burner, Weight
Loss, and Aerobic Endurance), an unlimited exercise time
setting may be an available option. Refer to Selecting a
Program.
• If your level of exertion becomes too great, reduce your
strides per minute and change the CrossRamp or
resistance settings using the arrow keys to override each
upcoming column in the program profile.
Owner’s Manual: Programs
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Program
Interval Programs
MANUAL
INTERVAL
The Manual Program profile, available by pressing the
MANUAL key, begins as a flat line. You control CrossRamp
and resistance settings using the CROSSRAMP or
RESISTANCE arrow keys. The program profile reflects
changes in all subsequent columns. The blinking column
indicates your position in the program. A cool-down period
occurs automatically when you complete the time, distance
or calorie goal. Refer to Exercise Session.
key, are among the best for conditioning your cardiovascular
system. Each program raises and lowers your level of
exertion repeatedly for the specified period of time.
Three programs let you choose the rest and work intervals
according to your training regimen.
Interval Program
1-1 Interval
Rest Duration
2 minutes
Work Duration
2 minutes
Note: An exception to the cool-down period exists. Refer to
Advanced Programming and Troubleshooting for more
information.
1-2 Interval
2 minutes
4 minutes
1-3 Interval
2 minutes
6 minutes
To use the SmartRate feature, you need to specify your age
during the setup prompts. To change the workout time, press
the TIME +/– key. Refer to Changing the Workout Time.
Initially, the rest interval is set to a CrossRamp of 4 and a
resistance of 1. The work interval is set at a CrossRamp of
10 and a resistance of 8. The display lets you know when the
preset levels are about to change and it indicates the levels
of the next interval.
Owner’s Manual: Programs
43
Download from Www.Somanuals.com. All Manuals Search And Download.
While exercising, you can vary your strides per minute and
change the preset ramp incline and resistance settings using
the CROSSRAMP or RESISTANCE arrow keys. The
settings are repeated throughout the remainder of the
program. When you complete the program the CrossRamp
and resistance settings return to their standard defaults. No
settings, established during your exercise session, are
saved.
Aerobic Endurance Program
VARIETY
The Aerobic Endurance Program can be accessed by
pressing the VARIETY key. The 30 to 60 minute program
has been designed by Dr. Emily Cooper of Seattle
muscular and aerobic endurance. It has a warmup period
followed by gradually increasing CrossRamp inclines and
resistance.
During the warmup period, the display prompts you to
maintain a specific stride rate which increases muscle
flexibility and raises your heart rate. When the program
begins, maintain the recommended stride rate of 140 strides
per minute to improve cardiopulmonary conditioning and
muscular endurance. The ramp incline varies throughout the
program every three minutes. When you complete the
program, a 3-minute, cool-down period begins.
The CrossRamp and resistance are preset based on your
body weight and the recommended strides per minute, but
you have the option to adjust either one during the program
using the arrow keys. If you make adjustments, you may
change the effectiveness of the program.
Owner’s Manual: Programs
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Hill Climb Program
Custom Programs
VARIETY
VARIETY
The Hill Climb Program, available by pressing the VARIETY
key, has preprogrammed CrossRamp settings in a fixed
pattern. You determine whether the program uses a time,
distance, or calorie goal. During your exercise session, you
can change your strides per minute and override the
CrossRamp or resistance settings using the arrow keys.
The two Custom Programs, are available if you select a
USER key, and then press the VARIETY key. As you
exercise, you customize the program by determining the
Crossramp or resistance settings for each 1-minute column
along the length of the profile. As each column elapses, the
CrossRamp and resistance settings for that column are
stored in memory.
The Hill Climb Program is designed to increase muscle tone,
cardio-conditioning, and endurance over several weeks.
The subsequent columns remain at the previous CrossRamp
and resistance settings. As you move through the program,
changes are reflected in the program profile. Adjust the
CrossRamp and resistance using the CROSSRAMP and
RESISTANCE arrow keys. The settings are automatically
recalled using the same USER key and program number.
When you initially configure the program, view the TIME
ELAPSED display to determine duration. The next time you
use the same program, TIME REMAINING is highlighted
and indicates your program time. When you reach the end of
the customized record, the display switches to TIME
ELAPSED and gives you a visual cue about the duration of
your program. You can continue customizing your program
by adjusting the CrossRamp and resistance for each column.
Owner’s Manual: Programs
45
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no automatic cool-down period when you end the
program. However, you can incorporate a cool down into the
Custom Program or switch to the Manual Program and make
the appropriate adjustments to lower your heart rate.
Custom Program Tips
• The custom programs are time-based, you cannot select a
distance or calorie goal.
• The duration of the custom program and the number of
CrossRamp and resistance settings is limited to available
memory in the EFX. The program does not end if the
available memory is exhausted, but the display notifies you
and further changes to CrossRamp or resistance are not
saved. Approximately, 2 hours of recording time are
available.
To end your exercise session, press RESET. A workout
summary appears and shows your grand totals for time,
distance, and calories. When you are ready, press RESET
again to return to the Precor banner. Refer to Ending a
Workout.
• You need to incorporate a cooling down period into your
exercise session. The cool-down period is not
automatically appended to the end of the custom
programs.
• The program profile reflects changes to the CrossRamp.
Owner’s Manual: Programs
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing the Settings in a Custom Program
Perform the following steps to clear (delete) any CrossRamp
or resistance settings stored in a custom program.
Heart Rate Programs
HEART
RATE
1. At the Precor banner, select the appropriate USER key,
and then press OK.
The Basic HRC Program, available by pressing the HEART
RATE key, adjusts the CrossRamp to maintain your heart rate
within two beats per minute of the target heart rate while you
exercise. To use this program, you must enter your age and
wear a chest strap or grasp the touch-sensitive handrail
grips so your heart rate can be monitored throughout the
session.
2. Display the custom program that you wish to clear.
Important: Clearing the CrossRamp and resistance
settings from a custom program permanently deletes
them from memory.
3. While the custom program name appears on the display,
press and hold the RESET key for a few seconds.
Important: Consult your physician to determine the
appropriate target heart rate for your age and fitness level.
If your physician recommends a different target heart rate
than the one that appears on the display adjust it
accordingly. You can also use the OPTIONS key to change
your target heart rate while exercising. Do not exercise over
the recommended range of 85% of your maximum aerobic
heart rate.
The following message scrolls across the display:
HOLD TO CLEAR CUSTOM PROGRAM
4. Continue pressing the RESET key while the following
messages scroll across the display.
CLEARING
CLEARED
5. Release the key when CLEARED scrolls off the display.
CrossRamp and resistance information resets to zero.
Note: You can release the RESET key anytime before
CLEARED scrolls off the display and no change will
occur to the custom program settings.
Owner’s Manual: Programs
47
Download from Www.Somanuals.com. All Manuals Search And Download.
• The program sets the target heart rate as a percentage of
220 minus your age. Changing the target heart rate your
stride rate or CrossRamp affects the unit’s ability to
maintain your target heart rate in the preferred zone. It
takes time for the EFX to readjust the resistance so that
your heart rate remains on target. Check the SmartRate
and the HEART RATE displays to see if you are
Heart Rate Program Tips
The Basic HRC Program enhances your overall
cardiovascular fitness level to help you achieve your weight
loss and fitness goals. Read through the following tips
before selecting a program. These tips provide general
information regarding how the program functions. For more
information and exercise suggestions, refer to the Precor
maintaining your preferred zone and to determine your
actual heart rate. For information about understanding
your target heart rate, refer to Heart Rate Features.
• Each program provides a 3-minute warm-up period.
During this time, you may change the CrossRamp or
resistance, but you cannot adjust the time or change to a
distance or calorie goal. At the end of the warm-up period,
the program automatically controls the resistance.
Pressing the RESISTANCE arrow keys has no affect.
• Changes to the CrossRamp are reflected in the program’s
profile. Automatic resistance changes appear in the
RESISTANCE display.
• To change your target heart rate, refer to Adjusting Your
Target Heart Rate.
• To view a variety of workout statistics, press the METRICS
Note: When your target heart rate is achieved or the
3-minute period elapses, the warm-up period ends and
the program begins.
key. Refer to Changing Your Workout Display Options.
• To adjust the time, press TIME +/– and use the navigational
arrow keys or number keypad followed by OK to change
the workout time after the warm-up period elapses.
• To change to a distance- or calorie-based goal, press the
GOAL key after the warm-up period elapses. Refer to
Adjusting Program Goals.
• To change the program, select a different PROGRAMS
key and press OK.
• A cool-down period is incorporated into the program.
Owner’s Manual: Programs
48
Download from Www.Somanuals.com. All Manuals Search And Download.
During the test, the EFX maintains the CrossRamp setting
at 4 and gradually increases the resistance in specific
stages. The display may request that you change your stride
rate.
Fitness Test Program
HEART
RATE
The keypads are disabled. The test ends if,
The Fitness Test, available by pressing the HEART RATE key,
is a test that consists of three 5-minute sessions. A warm-up
and cool-down period is incorporated into the program. The
actual duration of the test ranges between 5 and 23 minutes
depending on your fitness level. You cannot adjust the
CrossRamp or resistance settings.
• You press RESET.
• Two minutes has elapsed since the last heart rate signal
was received.
• After warm up, if you surpass your target heart rate (74%
of your maximum aerobic heart rate).
The Fitness Test measures the maximum amount of oxygen
(V02 max) the body can use for energy production during
exercise. The higher the amount of oxygen that your body
can use enhances your ability to exercise for prolonged
periods of time. The test results can help you gauge the
effectiveness of your current exercise routine and tailor it to
meet your fitness goals.
• You stop pedaling and the pause time limit elapses.
You must complete the test for it to determine your aerobic
capacity and establish your V02 max. Once you complete the
test, a fitness score and fitness level appear as part of the
workout summary. Use it to compare to Table 4 or Table 5.
Important: You must wear the chest strap or grasp both
touch-sensitive handrail grips throughout the Fitness Test.
If the heart rate reception is erratic, incorrect readings can
occur and terminate the test.
Owner’s Manual: Programs
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 4. Cardio respiratory Fitness Score Category—Females*
Fitness Test Tips
Read through the following tips before selecting the Fitness
Test.
Fitness Category
Low
Fitness
Medium
Fitness
High
Fitness
• Sit and rest for at least five minutes prior to taking the test.
• You must enter your weight, age, and gender.
Age in Years
20–39
28 (or below) 28–33
26 (or below) 26–31
24 (or below) 24–28
22 (or below) 22–26
33 (or above)
31 (or above)
28 (or above)
26 (or above)
• You can change to another program while in the midst of
taking the Fitness Test, but you will not receive a fitness
score.
40–49
50–59
60 and over
• If you press the RESET key during the test, the test ends
and the display indicates whether the test was completed.
* The test and analysis algorithm were developed by Dr. Emily Cooper of
Seattle Performance Medicine (www.spmedicine.com).
Important: If you need to stop the pedaling to regain
control or reduce your heart rate, please do so. You can
retake the fitness test later.
Table 5. Cardio respiratory Fitness Score Category—Males*
Fitness Category
Low
Fitness
Medium
Fitness
High
Fitness
Fitness Test Scores
Age in Years
20–39
The display prompts you to begin a cool down period when
you finish the Fitness Test. A fitness score and a fitness level
appear on the display as part of the workout summary and
relate to the tables shown below.
35 (or below) 35–42
32 (or below) 32–39
29 (or below) 29–36
24 (or below) 24–31
42 (or above)
39 (or above)
36 (or above)
31 (or above)
40–49
50–59
Note: A fitness score appears only if you complete at least
two stages of the test.
60 and over
* The test and analysis algorithm were developed by Dr. Emily Cooper of
Seattle Performance Medicine (www.spmedicine.com).
Owner’s Manual: Programs
50
Download from Www.Somanuals.com. All Manuals Search And Download.
The following chart briefly explains the purpose of each program.
Weight Loss Programs
Program Description
WEIGHT LOSS
Fat Burner This program has been designed by Dr. Emily Cooper
of Seattle Performance Medicine
The Weight Loss Programs, available by pressing the
WEIGHT LOSS key, provide a variety of programs targeted
at lowering body fat while improving muscle tone and
conditioning.
and increase endurance every time you exercise. The
program incorporates warm-up and cool-down
periods and allows you to select a program time
between 30 and 90 minutes. Work and rest intervals
appear along with recommended stride rates. The
faster pace stride rates, combined with fairly low
resistance levels provides optimal oxygenation to the
working muscles. The display prompts you when you
need to make changes in your stride rate. To monitor
your heart rate during the program, use the touch-
sensitive handrail grips or wear a chest strap. Refer to
Heart Rate Features.
Anytime during your exercise session you can use the
CROSSRAMP or RESISTANCE arrow keys to override
upcoming segments.
Calorie
Goal
Attain your designated calorie expenditure as you
promote aerobic activity and improve your
cardiovascular conditioning. When you select this
program, specify your calorie goal at the blinking
calorie prompt. Acceptable entries range from 1 to
5000 calories. Use the navigational arrow keys or
number keys to change the value, and then press OK
to begin.
Weight
Loss
Interval
Use this program if you are beginning or returning to a
regular fitness routine. The workout time is fixed at 28
minutes and consists of seven, 4-minute intervals. You
are not prompted for a workout time.
Owner’s Manual: Programs
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Gluteal Program
CrossTrainer Program
PERFORMANCE
PERFORMANCE
The Gluteal Program, available by pressing the
PERFORMANCE key, is designed to exercise your gluteal
muscles. The CrossRamp is preprogrammed and display
prompts appear indicating when to reverse pedal direction at
select intervals: 25%, 50%, and 75% of program
completion.
The CrossTrainer Program, available by pressing the
PERFORMANCE key, has preprogrammed CrossRamp and
resistance settings.
The program consists of alternating forward and backward
pedaling movements that focus on working the thigh and calf
muscle groups. Display prompts appear indicating when to
reverse pedal direction at select intervals: 25%, 50%, and
75% of program completion.
During your workout, set a comfortable stride rate. If needed,
use the CROSSRAMP or RESISTANCE arrow keys to
override upcoming segments. Any adjustments to the
CrossRamp or resistance are applied to upcoming
segments. CrossRamp changes are reflected in the program
profile.
During your workout, set a comfortable stride rate. If needed,
use the CROSSRAMP or RESISTANCE arrow keys to
override upcoming segments. Any adjustments to the
CrossRamp or resistance are applied to upcoming
segments. CrossRamp changes are reflected in the program
profile.
To adjust the time, change the goal, view additional workout
statistics or adjust your target heart rate, use the appropriate
navigational key: TIME +/-, GOAL, METRICS or OPTIONS.
Refer to Exercise Session.
To adjust the time, change the goal, view additional workout
statistics or adjust your target heart rate, use the appropriate
navigational key: TIME +/-, GOAL, METRICS or OPTIONS.
Refer to Exercise Session.
To change the program, select a different PROGRAMS key
and press OK.
To change the program, select a different PROGRAMS key
and press OK.
Owner’s Manual: Programs
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Exercise Session
This section describes how to use the navigational keys to
affect changes to your exercise session. While exercising,
you can:
Exercise Session Tips
•
When you press one of the navigational keys (TIME +/-,
GOAL, METRICS, or OPTIONS) you have 30 seconds
to make a selection. Prompts scroll across the display
and indicate what to do. If no key press occurs within 30
seconds, the center display reverts to its previous state.
•
•
•
•
•
•
Change the program you are using
Change the workout time
Choose between time-, distance-, or calorie-type goals
Change the display to U.S. Standard or Metric
Reset your target heart rate
•
When you press a navigational key, you enter its menu.
As you continue to press the key, you cycle through all
the menu selections. When a blank display appears, it
signifies you are no longer in the menu selection process.
Display more workout statistics
Note: Prior to selecting a program, you can select
preferences for units of measure and target heart rate. Refer
to Setting Display Preferences Before Exercising.
Changing Programs in Mid-session
You can change programs in the middle of a session by
selecting a new program from the PROGRAMS key menu.
All accumulated workout statistics are transferred to the new
program as you continue exercising.
Certain programs, such as the Fitness Test and the heart
rate program, are not available for mid-session transfers due
to set goals and program preferences. If this occurs, a
message scrolls across the center display.
Owner’s Manual: Exercise Session
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Some programs allow you to exercise indefinitely.
1. Once you begin a program, press the TIME +/– key.
A workout time blinks in the center display.
Changing the Workout Time
2. Press the number 0 (NO LIMIT) and then press OK to
accept this value.
To change the duration of your exercise session, take the
following steps:
Important: If you choose this option, the automatic cool-
down period is eliminated. You will need to incorporate a
cool-down period at the end of your exercise session by
accessing the Manual Program.
1. Press TIME +/–.
2. A workout time blinks in the center display. Use the
navigational arrow keys or the number keys to adjust the
time.
3. Press OK.
A message scrolls across the display indicating that the
new workout time has been accepted. If your attempt to
change the workout time is not accepted, display
messages scroll and indicate the reasons.
Owner’s Manual: Exercise Session
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Program Goals
Changing Your Workout
Display Options
During an exercise session, the center display becomes a
message bar. It can show additional workout statistics
depending on user selections accessed through the
METRICS menu.
To designate a distance, calories, or time goal while
exercising take the following steps:
1. Press the GOAL key until the goal you wish to use
appears on the display: TIME, DISTANCE, or
CALORIES.
To display more workout statistics or choose one among
them, take the following steps:
2. When you are ready, press OK to select the displayed
goal.
1. Press METRICS.
2. % COMPLETE appears.
3. A blinking number appears indicating that the system is
ready for adjustments to the goal. Use the number keys
or navigational arrow keys to change the setting.
3. Continue to press the METRICS key or use the
navigational arrow keys to scroll through all the available
displays. Refer to Table 6.
4. When you are ready, press OK. If the program you are
using allows changes to goal settings, a message scrolls
across the display indicating that your selection has been
accepted.
4. When you are ready, press OK to select a displayed
metric or display the entire menu consecutively by
selecting SHOW ALL.
Note: Several programs on the EFX are preset with a
time goal and cannot be changed. If a program has a
preset goal such as 30 to 90 minutes in the Fat Burner
Program, you cannot change it outside the set limits. A
message scrolls across the display indicating that
changing the goal is not an available option.
Note: To remove a scrolling statistic from the message
bar, you need to reenter the METRICS menu and select a
different metric display or select OFF.
Owner’s Manual: Exercise Session
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 6. Workout statistics available in the METRICS menu
METRICS Menu
Description
METRICS Menu
Description
AVG HEART RATE Displays your average heart rate. The number
(HR)
is based on systematic sampling taken while
you are exercising. A chest strap will give you
a more accurate heart rate average than if you
occasionally use the touch-sensitive handrail
grips. If no heart rate reading occurred during
your exercise session, three dashes appear
when you change to this display.
% COMPLETE
Shows how much of the program goal you
have completed.
TIME IN ZONE
Displays the total time that your heart rate is
within the range of 55% to 84% of your target
heart rate.
SEGMENT TIME
REMAINING
Indicates the amount of time, in minutes and
seconds, that remains in the highlighted
column of the profile before the next column
begins blinking.
DISTANCE
Indicates the linear distance in either miles or
kilometers. The distance is calculated based
on your pedaling speed.
AVERAGE SPEED Displays the average strides per minute
(SPM).
SHOW ALL
OFF
Presents all the workout statistics in this
menu in consecutive order.
CALS/MIN
Displays the approximate number of calories
burned per minute.
Stops scrolling the workout statistics, found
in this table, across the message bar.
CALS/HR
Displays the approximate number of calories
burned per hour.
WATTS
METS
Shows your current energy expenditure level.
Shows the metabolic units associated with
your current energy expenditure level, derived
from the calories per minute value and
adjusted for your weight.
TARGET HEART
RATE
Shows the current target heart rate setting.
Owner’s Manual: Exercise Session
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Units of Measure
Display
Adjusting Your Target Heart Rate
Display measurements can appear in either Metric or U.S.
Standard. To change this setting while exercising, perform
the following steps:
Your target heart rate can be adjusted anytime during your
exercise session by taking the following steps:
1. Press the OPTIONS key until TARGET HR appears.
2. Press OK.
1. Press the OPTIONS key until UNITS appears.
2. Press OK.
3. A blinking number appears indicating the suggested
target heart rate based on your age. Use the number keys
or navigational arrow keys to change the setting.
3. The current setting appears in the display. Use the
navigational arrow keys to toggle between the two
options: U.S. or METRIC.
4. When you are ready, press OK. A message scrolls across
the display indicating your target heart rate zone as you
continue your exercise session.
4. When you are ready, press OK to select the displayed
unit of measure. A message scrolls across the display
indicating that the unit of measure has changed as you
continue your exercise session.
Anytime during a program, you can grasp the touch-sensitive
handrail grips to view your heart rate. Use the METRICS key
to designate that your target heart rate appear in the center
display. Refer to Changing Your Workout Display Options.
Note: You can change the units of measure prior to
exercising. For more information, refer to Setting Display
Preferences Before Exercising.
Important: Consult your physician to determine the
appropriate target heart rate for your age and fitness level. If
your physician recommends a different target heart rate than
the one that appears on the display, change the target heart
rate to match your physician’s recommendation. Do not
exercise over the recommended range.
Owner’s Manual: Exercise Session
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Programming and Troubleshooting
Certain features remain hidden and can only be accessed
using special key presses. Read this section if you want to:
Advanced Programming Tips
•
Always start at the Precor banner.
•
•
Set the pause or cool-down times
•
The advanced programming and diagnostic mode is
accessed by pressing the RESET key at the Precor
banner. Any remaining key presses must occur quickly
and without pause.
Determine the setting for the CrossRamp auto-leveling
feature
•
•
•
•
•
View the odometer
•
•
The QUICKSTART key is disabled while in advanced
programming mode.
Display the number of hours you have used your EFX
View the software versions and part numbers
Check the usage log
The number keypad is disabled once you enter advanced
programming mode. You need to use the navigational
arrow keys to change the blinking prompts.
Check the error log
•
•
Some keys provide the same functionality and can be
used interchangeably while in advanced programming
mode. These keys are:
OK and ENTER
The advanced programming prompts appear sequentially
and in a menu format. Pressing the arrow keys in the
navigational keypad moves you through the programs.
Press OK to choose or accept the displayed selection. To
return to the Precor banner without saving any changes,
press RESET.
Owner’s Manual: Advanced Programming and Troubleshooting
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting a Pause Time Limit
Changing EFX Settings
You can limit how long a user can pause while exercising on
the unit by entering a time between 1 and 10 minutes. For
example, if you set the pause time limit to 60 seconds, the
display automatically resets to the Precor banner if no key
press occurs within one minute.
Through a specific set of number key presses, you can
customize the pause or cool down times.
To access the menu and change the settings, perform the
following steps:
1. At the Precor banner, press the following keys in
sequence without pausing between selections:
2. At the SET MAX PAUSE TIME prompt, press OK. Use
the navigational arrow keys to change the time limit.
Choose between 1 and 10 minutes. The default time is
10 minutes.
RESET, 5, 6, 7, 1
Numbers appear on the display as you press the
associated key.
3. When you are ready, press OK to accept the displayed
setting and move to the next program. Or, press RESET
to cancel any changes and return to the Precor banner.
DIAGS - SET PARAMETERS appears briefly.
Owner’s Manual: Advanced Programming and Troubleshooting
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting a Cool-Down Time Limit
Setting the CrossRamp Auto-Reset Feature
You can limit how long a user cools down after exercising on
the unit by entering a time between 0 and 5 minutes.
The EFX has an auto-reset feature. The ramp resets to a
specific incline level when you begin your exercise session
and choose a program that has a different initial CrossRamp
setting then the previously used program.
Important: It is highly recommended that you set the cool-
down period at or above three minutes. It takes time for a
user’s heart rate to return to a resting state after vigorous
exercise. An effective cool-down period also reduces the
amount of lactic acid in muscle tissue.
6. At the SET CROSSRAMP prompt, press OK. Use the
navigational arrow keys to select the desired ramp incline
level between 1 and 20.
7. When you are ready, press OK to accept the displayed
setting and return to the SET MAX PAUSE TIME prompt.
Or, press RESET to cancel changes and return to the
Precor banner.
4. At the SET COOL DOWN TIME prompt, press OK. Use
the navigational arrow keys to display the available time
limits. The default setting is 5 minutes.
5. When you are ready, press OK to accept the displayed
setting and move to the next program. Or, press RESET
to cancel changes and return to the Precor banner.
Owner’s Manual: Advanced Programming and Troubleshooting
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Odometer
Informational Displays
1. At the Precor banner, press the following keys in
sequence and without pause:
RESET, 6, 5
The EFX provides information about its use (odometer and
hour meter), as well as software version, usage log, and error
codes. In general, you would only access this information if
directed to do so by Precor Customer Support.
The numbers 6, 5 appear on the display as you press the
associated key.
These instructions guide you through all eight informational
displays. Pressing the OK key moves you through the
displays. Pressing the navigational arrow keys cycles you
through the menu selection. To exit, press RESET at any
time.
Then DIAGS - INFORMATION DISPLAY scrolls across
the display followed by ODOMETER.
2. Press OK to view the odometer value (cumulative strides
traveled) or press the ▼ arrow key to move to the next
informational display.
3. When you are ready, press OK to move to the next
display (hour meter).
Owner’s Manual: Advanced Programming and Troubleshooting
61
Download from Www.Somanuals.com. All Manuals Search And Download.
9. When you are ready, press OK to move to the next
display (lower board’s software version number).
Viewing the Hour Meter
HOUR METER scrolls across on the display.
LOWER SW scrolls across the display.
4. Press OK to view the number of hours that the unit has
been in use or press the ▼ arrow key to move to the next
informational display.
10.Press OK to view the lower board software version and
part number.
The EFX tracks the elapsed minutes, but the value that
appears is truncated to the nearest full hour.
11.When you are ready, press OK to move to the next
display (metrics board’s software part number).
5. When you are ready, press OK to move to the next
display (software version).
METRICS BOARD SW PART NUMBER scrolls across
the display.
12.Write the numbers below. You will need these numbers
if you call Customer Support with questions. This
information will help rule out any software-related
problems:
Viewing the Software Part Numbers
U-BOOT SW scrolls across the display.
6. Press OK to view the upper board boot software part
number (for example, 48996-100) or press the ▼ arrow
key to move to the next informational display.
UPPER BOOT SW: ___________________
UPPER BASE SW: ___________________
LOWER SW: ___________________
7. When you are ready, press OK to move to the next
display (upper base application software part number).
U-BASE SW scrolls across the display.
METRICS BOARD SW: ___________________
8. Press OK to view the upper base application software
part number or press the ▼ arrow key to move to the next
informational display.
13.When you are ready, press OK to move to the next
display (usage log).
Owner’s Manual: Advanced Programming and Troubleshooting
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Usage Log
Viewing the Error Log
USAGE LOG scrolls across the display.
ERROR LOG scrolls across the display.
14.When you are ready, press OK to view each program, the
number of times it has been used, and the associated
cumulative minutes. The usage log is helpful in
17. When you are ready, press OK to determine how many
errors exist in the error log or press the ▼ arrow key to
cycle back to the ODOMETER display.
determining user preferences in program selection.
Note: If there are no errors in the log, you will see NO
ERRORS displayed. When you press OK, you return to
the ODOMETER display.
15.Use the navigational arrow keys to select and view usage
information about each specific program.
Note: For a list of programs, refer to PROGRAMS
18.Press OK again to view the first entry in the error log.
Keypad and Table 3.
19.To move through the error log, continue to press the ▼
arrow key. Each error code specifies when it occurred,
listing the error code, odometer, hour meter and current
(amps) values.
16.When you are ready, press OK to move to the next
display (error log).
Note: Use the ▲ arrow key to review prior error log
entries. To exit the error log, press OK while the code
scrolls across the display.
20.Copy the error code information to paper so you can
provide it to Customer Support if needed. Be sure to
copy it exactly as shown.
Owner’s Manual: Advanced Programming and Troubleshooting
63
Download from Www.Somanuals.com. All Manuals Search And Download.
21.When you no longer need the information in the error log,
press QUICKSTART for at least four seconds to erase it.
The message, NO ERRORS, appears on the display and
remains static to let you know when the error log has
been cleared.
Troubleshooting Error Codes
If any error codes appear in the center display, turn the unit
Off and On. If the error continues to occur, call an authorized
service person for assistance. Refer to Obtaining Service.
If ERROR 30 appears on the display, you have an incorrect
RJ45 cable connection. Remove the cable and re-insert it
into the appropriate receptacle on the back of the display
console. The correct receptacle has the tab opening at its
base.
Important: You cannot retrieve the error log once you
have cleared it. You may want to resolve any issues you
are experiencing with the EFX before clearing the error
log.
22.When you are ready, press OK to cycle back to the
ODOMETER, or press RESET to return to the Precor
banner.
For example:
Tab location
Owner’s Manual: Advanced Programming and Troubleshooting
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 7. Erratic heart rate readings
Troubleshooting Heart Rate
Table 7 may help you understand and troubleshoot erratic
heart rate readings.
What appears on
the display
Cause
What to Do
Nothing
The heart rate
receiver is not
installed or it has
been disconnected.
To receive Customer
Support, refer to
Obtaining Service.
Important: A heart rate can only be detected when the EFX
is turned On and you wear the chest strap or hold on to
both touch-sensitive handrail grips.
To conduct electrical impulses from a user’s heart, both
touch-sensitive handrail grips must be grasped firmly for five
to ten seconds. Usually, the concentration of salts in a
person’s perspiration provides enough conductivity to
transmit a signal to the receiver in the display console.
However, because of body chemistry or erratic heartbeats,
some people cannot use the heart rate feature. A chest strap
may provide better results. Refer to the QuickStart Card for
proper placement of the chest strap.
— — —
A signal is being
detected, but the
transmission requires your skin.
more time to establish
a heart rate.
Be sure the chest strap
is in direct contact with
Hr
A signal is being
detected, but the
transmission requires use both hands and
more time to establish make sure your hands
If using the touch-
sensitive handrail grips,
a heart rate.
are moist, not dry.
Pulsing HEART
The LED heart blinks If the LED is pulsating,
when a heart beat is it indicates that the
detected.
heart rate equipment is
working properly.
Owner’s Manual: Advanced Programming and Troubleshooting
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
It is important to perform the minor maintenance tasks
described in this section. Failure to maintain the EFX as
described here could void the Precor Limited Warranty.
Cleaning the Equipment
Most of the working mechanisms are protected inside the
covers. However, for efficient operation, the EFX relies on
foot pedals, handlebars, and covers must be as clean as
possible.
To reduce the risk of electrical shock,
DANGER
always unplug the unit from its power
source before cleaning it or
performing any maintenance tasks.
Precor recommends the EFX be cleaned before and after
each workout. Use mild soap and water; dampen a soft cloth
and wipe all exposed surfaces. This helps remove any dust
or dirt.
Inspection
Inspect the EFX before use.
CAUTION: Do not use any acidic cleaners. Doing so will
weaken the paint or powder coatings and void the Precor
Limited Warranty. Never pour water or spray liquids on any
part of the EFX. Allow the EFX to dry completely before
using.
Look and listen for slipping belts, loose fasteners, unusual
noises, worn or frayed power cords, and any other
indications that the equipment may be in need of service. If
you notice any of these, obtain service.
Frequently vacuum the floor around the unit to prevent the
accumulation of dust and dirt, which can affect the smooth
operation of the unit. Use a soft nylon scrub brush to clean
the foot pedals.
Important: If you determine that the EFX needs service,
make sure that the EFX cannot be used inadvertently. Turn
the unit Off, insert the locking pin and then unplug the
power cord from its power source. Make sure other users
know that the EFX needs service.
To order parts or to contact a Precor authorized service
provider in your area, refer to Obtaining Service.
Owner’s Manual: Maintenance
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing the Chest Strap
Store the chest strap in a place where it remains free of dust
and dirt such as, in a closet or drawer. Be sure to protect
the chest strap from extremes in temperature. Do not store it
in a place that may be exposed to temperatures below 32° F
(0° C).
To clean the chest strap, use a sponge or soft cloth
dampened in mild soap and water. Dry the surface
thoroughly with a clean towel.
Long-Term Storage
When the EFX is not in use for any length of time, turn it Off.
Make sure that the power cord is unplugged from its power
source and is positioned so that it will not become damaged
or interfere with people or other equipment.
Owner’s Manual: Maintenance
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Precor Residential Equipment Limited Warranty
PLEASE READ THESE WARRANTY TERMS AND CONDITIONS
CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED
PRODUCT. BY USING THE EQUIPMENT, YOU ARE
CONSENTING TO BE BOUND BY THE FOLLOWING
WARRANTY TERMS AND CONDITIONS.
Options / Accessories
Many options or accessories have components that are connected
internally or mounted inside the electronic console. The following
guidelines determine the warranty for these components. If the
internal components are installed by the factory or by an authorized
dealer as part of the original sale and delivery, they have a warranty
that is identical to the warranty of the equipment in which they are
connected or mounted. If the internal components are not installed
by the factory or by an authorized dealer as part of the original sale
and delivery, they have a 90-day parts and labor limited warranty. All
components that are not internally connected have 90-day parts
only limited warranty. Satisfactory proof of purchase is required in
all cases.
Limited Warranty
Precor Incorporated warrants all new Precor products to be free
from defects in materials and manufacture for the warranty period
set forth below. The warranty period commences on the invoice
date of original purchase. This warranty applies only against defects
discovered within the warranty period and extends only to the
original purchaser of the product. Parts repaired or replaced under
the terms of this warranty will be warranted for the remainder of the
original warranty period only. To make claim under warranty, the
buyer must notify Precor or their authorized Precor dealer within 30
days after the date of discovery of any nonconformity and make the
affected product available for inspection by Precor or its service
representative. Precor’s obligations under this warranty are limited
and set forth below.
Conditions and Restrictions
This warranty is valid only in accordance with the conditions set
forth below:
1. The warranty applies to the Precor product only while:
a. It remains in the possession of the original purchaser and
proof of purchase is demonstrated
b. It has not been subjected to accident, misuse, abuse,
improper service, or non-Precor modifications
c. Claims are made within the warranty period
Warranty Periods and Coverage
All residential products and commercial products used in the home
are warranted for the following periods:
2. This warranty does not cover damage or equipment failure
caused by electrical wiring not in compliance with electrical
codes or Precor owner’s manual specifications, or failure to
provide reasonable and necessary maintenance as outlined in
the owner’s manual.
•
•
•
•
Lifetime frame and welds
10 years parts and wear items
1 year labor
Coverage for options and accessories defined below.
Owner’s Manual: Precor Residential Equipment Limited Warranty
68
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECOR ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER
OBLIGATIONS OR LIABILITIES, EXPRESS OR IMPLIED, ARISING BY
LAW OR OTHERWISE, WITH RESPECT TO ANY NONCONFORMANCE
OR DEFECT IN ANY PRODUCT, INCLUDING BUT NOT LIMITED TO: (A)
ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN TORT,
WHETHER OR NOT ARISING FROM THE NEGLIGENCE OF PRECOR
OR ITS SUPPLIERS (WHETHER ACTIVE, PASSIVE OR IMPUTED); AND
(B) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM, OR REMEDY FOR
LOSS OF OR DAMAGE TO ANY EQUIPMENT. This disclaimer and
release shall apply even if the express warranty set forth above fails
of its essential purpose.
3. Warranty of all Precor products applies to residential use only
and is void when products are used in a nonresidential
environment or installed in a country other than where sold.
4. Except in Canada, Precor does not pay labor outside the United
States.
5. Warranties outside the United States and Canada may vary.
Please contact your local Dealer for details.
This limited warranty shall not apply to:
1. Software version upgrades
2. Cosmetic items, including, but not limited to the following: grips,
seats, and labels.
3. Repairs performed on Precor equipment missing a serial number
or with a serial tag that has been altered or defaced.
4. Service calls to correct installation of the equipment or instruct
owners on how to use the equipment.
5. Pickup, delivery, or freight charges involved with repairs.
6. Any labor costs incurred beyond the applicable labor warranty
period.
Exclusive Remedies
For any product described above that fails to conform to its
warranty, Precor will provide, at their option, one of the following:
(1) repair; (2) replacement; or (3) refund of the purchase price.
Precor Limited Warranty service may be obtained by contacting the
authorized dealer from whom you purchased the item. Precor
compensates Servicers for warranty trips within their normal service
area to repair equipment at the owner’s location. You may be
charged a trip charge outside the service area. THESE SHALL BE
THE SOLE AND EXCLUSIVE REMEDIES OF THE BUYER FOR ANY
BREACH OF WARRANTY.
Disclaimer and Release
The warranties provided herein are the exclusive warranties given
by Precor and supersede any prior, contrary or additional
representations, whether oral or written. ANY IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE THAT APPLY TO ANY PARTS
DESCRIBED ABOVE ARE LIMITED IN DURATION TO THE PERIODS OF
EXPRESS WARRANTIES GIVEN ABOVE FOR THOSE SAME PARTS.
PRECOR HEREBY DISCLAIMS AND EXCLUDES THOSE WARRANTIES
THEREAFTER. Some states do not allow limitation on how long an
implied warranty lasts, so the above limitation may not apply to you.
Owner’s Manual: Precor Residential Equipment Limited Warranty
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Exclusion of Consequential and Incidental
Damages
PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR
LIABILITY, WHETHER ARISING IN CONTRACT (INCLUDING
WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE, OR IMPUTED
NEGLIGENCE AND STRICT LIABILITY), OR OTHERWISE, FOR
DAMAGE TO THE EQUIPMENT, PROPERTY DAMAGE, LOSS OF USE,
REVENUE OR PROFIT, COST OF CAPITAL, COST OF SUBSTITUTE
EQUIPMENT, ADDITIONAL COST INCURRED BY BUYER (BY WAY OF
CORRECTION OR OTHERWISE) OR ANY OTHER INCIDENTAL,
SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER
RESULTING FROM NONDELIVERY OR FROM THE USE, MISUSE OR
INABILITY TO USE THE PRODUCT. This exclusion applies even if the
above warranty fails of its essential purpose and regardless of
whether such damages are sought for breach of warranty, breach of
contract, negligence, or strict liability in tort or under any other legal
theory. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation might
not apply.
This warranty gives you specific legal rights, and you may also have
other rights, which vary state to state.
Effective 01 January, 2003
P/N 36287-110
Owner’s Manual: Precor Residential Equipment Limited Warranty
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You and Welcome to Precor
To allow us to serve you better, please take a few moments to
complete and return your warranty registration.
YOU MAY ALSO REGISTER ONLINE AT
If you have questions or need additional information, contact your
local dealer or call Precor Customer Support at 800-347-4404.
Fold along dotted line and tape closed before mailing.
.
R E T
9 A 8 W 0 , 7 2 - 4 v 0 i l l 0 e 2 o o W d i n
x 7 2 0 2 P O B o
u e e N v n E
2 0 0 3 1 1 4 2 n d A
P r e c o r I n c o r
p o r a t e d
H E R E
A M S P T
C E P L A
Download from Www.Somanuals.com. All Manuals Search And Download.
TELL US ABOUT YOUR NEW PRECOR PRODUCT
Product
Serial
Number:
Date of
Purchase:
Month
Day
Year
The serial number is located on the shipping box and on the product.
Purchased
from:
Dealer Name
Please indicate the type of product purchased:
Elliptical Fitness CrossTrainerTM (EFX®)
Treadmill
❑
❑
❑
StretchTrainerTM
Cycle
Stair Climber
❑
❑
❑
Strength Training System
TELL US ABOUT YOU
❑ Mr.
❑ Mrs.
❑ Ms.
First Name
Street Address
City
Middle Initial
Last Name
Apt./Suite:
State
Zip Code
Area Code
Telephone
Your Email Address
Gender:
❑ Male
❑ Female ❑ Divorced
Marital status:
❑ Married
Age:
Annual household income:
❑ Under $50,000
❑ $51,000-75,000
❑ $76,000-100,000
❑ $101,000-150,000
❑ $151,000+
What are your fitness goals?
❑ Weight loss/management
❑ Muscle tone enhancement
❑ Cardiovascular improvement
❑ Overall health
❑ Increase energy and flexibility
❑ Stress reduction
❑ Rehabilitation
❑ Under 18
❑ 18-24
❑ 25-34
❑ 35-44
❑ 45-54
❑ 55-64
❑ 65+
❑ Widowed
❑ Never been married
❑ Other
TELL US ABOUT YOUR PURCHASE
Purchase (check all that apply):
❑ First Precor product
❑ Replaces a Precor product of the same type
❑ Replaces same type of product – different brand
❑ Addition to equipment currently owned
How did you FIRST become aware of Precor
products (choose only one):
❑ A gift
❑ Friend/relative
❑ Physician
❑ Fitness club
What factors MOST influenced your decision to
purchase your Precor product (choose up to three):
❑ Internet
❑ News report or product review
❑ Precor reputation
❑ Prior use of Precor product(s)
❑ Design/appearance
❑ Special product features
❑ Physician recommendation
❑ Rebate or sale price
❑ Quality/durability
❑ Warranty
❑ Magazine advertisement or article
❑ Print advertisement
❑ In-store display or demonstration
❑ Other
❑ Value for the price
Effective 28 June 2004
P/N 45623-102
Download from Www.Somanuals.com. All Manuals Search And Download.
Programs
EFX5.37 Elliptical Fitness
CrossTrainerTM
Product Specifications
Electronic Readouts
Manual
Interval
1-1 Interval
1-2 Interval
1-3 Interval
Variety
Aerobic Endurance
Hill Climb
1 Custom ✝
2 Custom ✝
Heart Rate
% Complete
Average Heart Rate*
Calories
CrossRamp
Goal
Heart Rate*
Maximum Heart Rate*
Metrics
Strides per Minute
Target Heart Rate
Time
Time Elapsed
Time in Heart Rate Zone*
Time Remaining
Total Strides
Units
Basic HRC*
Fitness Test*
Weight Loss
Fat Burner
Calorie Goal*
Weight Loss Interval
Performance
Gluteal
Length:
Width:
Height:
Weight:
Shipping weight:
Power:
CrossRamp®:
Incline Settings:
Resistance Levels
Frame:
85 in (216 cm)
31 in (79 cm)
63 in (160 cm)
240 lb (109 kg)
290 lb (123 kg)
120 VAC, 50/60Hz
13° – 40°
1–20
1–20
Powder-coated steel
Profile
Resistance
SmartRate*
Watts
Vertical Gain
CrossTrainer
✝ Appears when you select a USER key.
* Use of chest strap or touch-sensitive handrail grips is required.
Regulatory Approvals: FCC, ETL, CE
Product Features
CSAFE Compatible
QUICKSTART™
SmartRate®
Heart Rate Telemetry
(chest strap included)
Touch Heart Rate
User Keys (4)
Download from Www.Somanuals.com. All Manuals Search And Download.
Precor, C, CrossRamp, EFX, M, Move Beyond, and SmartRate are registered trademarks of Precor
Incorporated. Crosstrainer, QuickStart, and StretchTrainer are trademarks of Precor Incorporated.
Copyright 2007 Precor Incorporated.
Specifications subject to change without notice.
NOTICE:
Precor is widely recognized for its innovative, award winning designs of exercise equipment.
Precor aggressively seeks U.S. and foreign patents for both the mechanical construction and the
visual aspects of its product design. Any party contemplating the use of Precor’s product designs
is hereby forewarned that Precor considers the unauthorized appropriation of its proprietary rights
to be a very serious matter. Precor will vigorously pursue all unauthorized appropriation of its
proprietary rights.
Precor Incorporated
20031 142nd Ave NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
1-800-347-4404
5.37 OM 34231-101, en
Warranty # 36287-110, en
Registration Card# 45623-102, en
31 July 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
|