Displays your heart rate as bpm and % of HRmax , average
heart rate and exercise duration
COMPLETE HR
Quick Guide
Allows you to set 5 exercise sets for interval training with HR
target zones and recovery calculation. Records a complete file
and five summary files of the exercises.
Signal/Light
Up
Predicts your maximal oxygen uptake
Reduces possible interference from other heart rate monitors
Sports watch features
•
•
move onward
increase the
selected value
Stop
Down
•
exit the
•
•
move backward
displayed mode
return to the
Time of Day display
reduce the
•
selected value
OK
•
•
start measuring the heart rate
lock in your selection
How to Start Measuring Your Heart Rate (BasicUse)
1. Place the transmitter around your chest and wet its electrodes. Wear the wrist
receiver on your wrist.
2. Press and hold the OK button to start the measurement. The stopwatch and
the exercise recording start. Your heart rate will appear in max.
15 seconds.
USA/GBR
™
™
USER’S MANUAL
How to Stop Measuring Your Heart Rate
S410 /S210
™
™
1. Press the stop button. The stopwatch and other calculations stop. Heart rate
measurement continues but exercise data is not recorded into a file anymore.
2. Press the stop button again. The receiver returns to Time of Day display.
S410 /S210
H E A R T R AT E M O N I T O R
H E A R T R AT E M O N I T O R
Download from Www.Somanuals.com. All Manuals Search And Download.
The Polar heart rate monitor offers you various possibilities on customising
exercise sessions to fit your personal needs.
For example, use the Interval Trainer™ function to guide you through a
complete interval training session. Or, you can choose the functions that suit you
best: OwnCal® calorie calculation, timers, recovery calculation, etc. After training,
you can review your exercise file. Monitor your fitness level, and any long-term
changes in it, by performing the quick and easy Polar Fitness Test™.
Please read this manual carefully to familiarize yourself with the Polar heart
rate monitor. Here is where you can find the information you need to use and
maintain your equipment. The function road map on the front cover is a quick
guide to the versatile features of the Polar heart rate monitor. Please tear it off
and save it for your reference.
Please refer to the glossary for special terms, display symbols and text
explanations. The alphabetical index will help you quickly find answers to
any questions that you might encounter while using your Polar heart rate monitor.
Thank you for choosing Polar!
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
This manual contains user information for both Polar S410 and Polar S210
heart rate monitor owners. The information specific only for the Polar S410
is marked with a grey background.
A. Getting going ....................... 5
Heart Rate Monitor Parts ........................ 5
Buttons and Their Functions ................... 6
Easy Start .................................................. 8
How to Prepare the Wrist Receiver ... 8
How to Put the Transmitter On ......... 9
How to Start Measuring
Setting Recovery Calculation ....... 26
Naming Exercise Sets ......................... 27
Turning Functions on/off ....................... 28
OwnCal Calorie Counter on/off ....... 28
Fitness Test on/off .............................. 29
Predicted Maximum Heart Rate
on/off .................................................. 29
Monitor Settings .................................... 30
Turning Activity/Button
Your Heart Rate ................................... 9
How to Stop
Measuring Your Heart Rate ............. 10
After Exercising.................................. 10
Modes and Their Functions ................... 11
Sound on/off ...................................... 30
Selecting Measuring Units ................ 30
Turning Help on/off ........................... 31
Watch Settings ..................................... 32
Setting Alarm ..................................... 32
Setting Time of Day........................... 32
Setting Date ....................................... 33
Setting Tips ............................................. 34
Swap Time 1 or Time 2 ...................... 34
Shortcut to Watch Settings .............. 34
Swap Measuring Units ...................... 34
Swap Date and User ID Number
B. How to Enter Settings ........ 16
User Information Settings ..................... 18
Exercise Settings ..................................... 21
Setting Exercise Sets .......................... 22
Setting Timers ................................ 24
Setting Heart Rate Limits ............. 24
Turning Heart Rate Limits on/off ... 24
Setting Interval Type..................... 25
Setting the Number of Intervals
with Polar S410 .................................. 34
and Recoveries ............................... 26
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Exercise ................................ 35
Heart Rate Measure Mode .................... 35
Exercise Recording Mode ...................... 37
Turning Heart Rate
Tips During Exercise ............................... 49
Checking the Heart Rate Limits ....... 49
Swapping the Exercise Type ............. 49
Restarting the Interval or
Zone Alarm on/off ............................. 37
Swapping the Heart Rate Limits ...... 38
Illuminating the Display.................... 38
Storing Lap and Split Time ............... 39
Pausing the Exercise .......................... 39
Swapping the Displayed
Recovery Calculation ......................... 49
Interrupting an Interval or
Recovery Calculation ......................... 49
Interrupting a Phase of an
Interval Training Exercise ................. 49
Exercise Information ......................... 40
Resetting the Stopwatch to Zero ..... 41
Starting an Exercise Set ......................... 42
Exercising with Interval Training Set ... 42
Warm-up Phase .................................. 43
Interval Phase ..................................... 44
Cool-down Phase ............................... 46
Interrupting an Interval
Training Exercise ................................ 47
Exercising with BasicSet ........................ 47
Starting the Timers ............................ 47
Starting the Recovery Calculation ... 48
Stopping the Exercise ............................ 48
D.How to Recall
Training Information .......... 50
Exercise Time .......................................... 53
Recovery Information of BasicSet ........ 53
Heart Rate Limits ................................... 53
Exercise Time Within, Above and Below
the Heart Rate Zones ............................. 54
Calorie Expenditure ............................... 54
Cumulative Calorie Count ..................... 54
Cumulative Exercise Time Count .......... 54
Interval Training Information ............... 55
Lap Information ..................................... 57
Resetting Cumulative Counts to Zero .. 58
Download from Www.Somanuals.com. All Manuals Search And Download.
E. Connection to Computer.... 59 G. Care and Maintenance ...... 71
Downloading Training Data
with Polar Precision Performance
H. Precautions ......................... 73
Software ................................................. 60
Transferring Settings from Computer
with Polar Precision Performance
I. Frequently Asked
Questions ............................ 77
Software ................................................. 61
J. Technical Specifications .... 81
F. Polar Fitness test ................. 63
OwnIndex ............................................... 63 K. Limited Polar International
Predicted Maximum Heart Rate ........... 65
Fitness Test Settings ............................... 66
Guarantee ........................... 84
Carrying Out the Test ............................ 66 L. Disclaimer ........................... 85
Update OwnIndex and HR max -p .......... 68
Fitness Classes ......................................... 69 M. Polar Glossary .................... 86
Display Symbols ...................................... 88
Display Texts ........................................... 89
Index ........................................................ 92
Download from Www.Somanuals.com. All Manuals Search And Download.
A. GETTING GOING
Heart Rate Monitor
Parts and Their
Functions
The elastic strap holds
the transmitter
comfortably, yet firmly,
in the correct position.
The transmitter detects
your heart rate and
transmits it to the wrist
receiver.
The wrist receiver displays
your heart rate and other
data during exercise.
Enter your personal
settings into the receiver
and analyze the exercise
files after you’re done.
A 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons and Their Functions
SIGNAL/
Signal/ Light
Reset
Turns the beep on or off.
Turns the backlight on.
LIGHT
RESET
STOP
Resets the heart rate monitor.
Stop Return - Stops measuring the heart rate.
Exits the displayed mode and returns to
the previous mode level.
Returns to the Time of Day display
from any mode by pressing and
holding the stop button.
OK
OK
Accept - Starts measuring the heart rate (start).
Enters the displayed mode shown on
the lower level (start). Locks in your
selection (ok). Records lap information
(lap). The Help text (start, ok or lap)
that appears on the display above the
button indicates its use.
A 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Up
Moves to the following
mode. Increases the
selected value.
Down Returns to the previous
mode. Decreases the
selected value.
Useful Tips
•
Briefly pressing a button (approximately 1 second) will do different
things than pressing and holding the button for a longer period of
time (approximately 2 to 5 seconds). If your press the button for a
longer period of time, you can use shortcuts.
•
•
•
The buttons are slightly stiffer than those of an ordinary watch to
prevent them from being pressed accidentally.
You can always return to the Time of Day display from the Options
setting or File recalling loops by pressing and holding the stop button.
See the glossary for display symbols and text interpretation.
A 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Start
How to Prepare the Wrist Receiver
1. Since the display is blank when the receiver leaves the
factory, you have to activate the wrist receiver by pressing
the OK button twice, after which the Time of Day display
appears. This is a one-off procedure; once you have turned
on your receiver you can not turn it off anymore.
2. You may start measuring your heart rate right away
using the default settings. However, the following
settings are ones that it would be useful to change as
soon as possible: Time of Day (see section Watch settings)
and personal user settings (see section User information
settings).
3. The receiver has various functions that you can use
according to your personal training needs. For more
information, see section Modes and their functions.
4. Wear the wrist receiver as you would wear an ordinary
watch. If you go biking, we recommend attaching the
wrist receiver to a Polar Bike Mount™.
A 8
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Put the Transmitter On
1. Attach the transmitter to the elastic strap.
2. Adjust the strap length to fit snugly and
comfortably. Secure the strap around your
chest, just below the chest muscles, and
buckle it.
3. Lift the transmitter off your chest and
moisten the grooved electrode areas
on the back.
4. Check that the wet electrode areas are firmly
against your skin and the Polar logo is in a
central, upright position.
How to Start Measuring Your Heart Rate
1. Begin with the display that shows
the time of day.
2. Keep the wrist receiver within
3 feet/ 1 meter of your transmitter.
3. Check that you are not near people that have
heart rate monitors, high voltage power lines,
televisions, mobile phones or other sources of
electromagnetic disturbance.
A 9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the OK button to start measuring your heart rate. A heart symbol
will start flashing and your heart rate (beats per minute) will appear in
a maximum of 15 seconds.
5. Press OK again. The stopwatch starts running and you can start
exercising. The exercise data will only be stored in a file if you have
turned the stopwatch on. Each time you exercise, your previous
complete file is compressed to summary file.
How to Stop Measuring Your Heart Rate
1. Press the stop button. The stopwatch and other calculations stop.
The heart rate measuring continues, although exercise data is no longer
recorded.
2. Press the stop button again. The heart rate measuring stops.
The receiver shows the Time of Day display again.
After Exercising
1. Carefully wash the transmitter with a mild soap and water solution.
2. Rinse it with pure water.
3. Dry the transmitter carefully with a soft towel.
4. Store the transmitter in a clean and dry place. Dirt impairs the
conductivity and functioning of the transmitter. Sweat and moisture can
keep the electrodes wet and the transmitter activated, which shortens
battery life.
A 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes and Their Functions
Polar S410/Polar S210 have the following main modes: Time of Day,
Exercise, File, Options and Fitness test.
Additionally Polar S410 has connection mode.
1. TIME OF DAY
You can use your Polar heart rate monitor as an ordinary watch with date,
weekday indicator and an alarm function. You can also change between
two different countries’ time zones.
2. EXERCISE
In the Exercise mode, you measure your heart rate and exercise
information is recorded in a complete File. You can preset up to five
exercise sets for your personal needs. When you start exercising, just
select one of the saved sets. Or, you can select BasicUse (heart rate
measurement without heart rate limits, timers or other exercise
guiding functions).
A 11
Download from Www.Somanuals.com. All Manuals Search And Download.
A. During BasicUse, you can save 99 split and lap times with current,
maximum and average heart rates for each lap. You can configure the
display to show information on the following:
•
your current heart rate, average heart rate or a reading of your
maximum heart rate in percentages
•
•
•
•
the current exercise time (stopwatch)
time of day
current lap and split time as well as the lap number
calorie count for your exercise session
B. Freely programmable BasicSet will automatically guide you
through your exercise session with the help of the following functions:
•
•
•
three adjustable target heart rate limits
three adjustable, alternating timers
time-based or heart-rate-based recovery calculation
C. Freely programmable Interval Trainer will automatically guide
you through your interval training session with the help of the
following, preset exercise phases:
•
•
warm-up with a target heart rate zone and a countdown timer
up to 30 intervals with a target heart rate zone. After each
interval you have a recovery calculation option.
•
cool-down with a target zone and a countdown timer
A 12
Download from Www.Somanuals.com. All Manuals Search And Download.
3. FILE
Your receiver stores the latest exercise information in one complete file:
•
•
•
•
•
•
•
•
•
•
•
the start date and time of the exercise
total exercise time
the average and maximum heart rate readings for the exercise session
the recovery value (only BasicSet)
your heart rate limits used during the exercise
your time spent in, above and below your target zones during exercise
OwnCal calorie expenditure
your cumulative calorie expenditure
your cumulative exercise time
your interval training information: warm-up, interval and cool-down phases
your lap information: best lap time; lap and split times; and current,
average and maximum heart rate for each lap
In addition to a complete file, your five previous exercise sessions will be
saved in five summary files. These record:
•
•
•
the start date and time of the exercise
total exercising time
the average and maximum heart rate readings for the exercise session
A 13
Download from Www.Somanuals.com. All Manuals Search And Download.
4. OPTIONS
In the Options mode, you can enter the following settings:
Exercise Settings: you can select BasicUse with no settings or 5 freely
programmable BasicSets or Interval Training Sets
Function settings: OwnCal calorie counter on/off, fitness test on/off,
predicted maximum heart rate on/off
User-specific Information: weight, height, date of birth, gender,
activity level, maximum heart rate and maximal oxygen uptake
Monitor Settings: activity/button sound on/off, measurement units,
Help on/off
Watch Settings: alarm, time of day and date
A 14
Download from Www.Somanuals.com. All Manuals Search And Download.
5. FITNESS TEST
In this mode you can:
•
•
•
perform the Polar Fitness Test
recall your latest test results; OwnIndex and HRmax-p values
update your user information to reflect your most recent OwnIndex and
HRmax-p values
6. CONNECTION
In Polar S410 you have the Connection mode that is used for communication
between wrist receiver and computer. In this mode you can:
•
transfer your receiver settings from your computer with Polar Precision
Performance software version 4 or later
•
download recorded exercise information, which is included in the
complete file, to your computer for detailed analysis with Polar
Precision Performance software version 4 or later
A 15
Download from Www.Somanuals.com. All Manuals Search And Download.
B. HOW TO ENTER SETTINGS
This section describes how to manually enter
settings by pressing the receiver buttons. See also
chapter "Connection to Computer".
B 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Of Day
Exercise Set
File
Options
Fit. Test
Connect
Function Set
User Set
Monitor Set
Watch Set
1. In the Time of Day display, scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Scroll up or down until the desired setting mode is displayed.
4. Press OK to start the settings.
•
•
•
•
•
•
Move forward and backward by using the up or down buttons.
Press OK to start adjusting the value.
Scroll up or down to adjust the value.
Press OK to lock in your selection.
Move backward to the previous setting level by pressing the stop button.
To return to the Time of Day display, wherever you are in the Options
settings: Press and hold the stop button.
•
•
The digits run faster if you press and hold the up or down button as you
adjust the value. Release the button when approaching the desired value.
On the display each function is presented by an abbreviated text.
A flashing block on the display indicates how far you are in the
setting mode.
B 17
Download from Www.Somanuals.com. All Manuals Search And Download.
User Information Settings
Options
User Set
lbs/ kg
feet inch/ cm
Birthday
Sex
Activity
HRmax
VO2max
In the User Set loop you can move forward only by pressing OK.
Measuring units depend on your choice in Options/ Monitor Set/ Unit 1 or Unit 2.
Units 1
Units 2
Weight
kg
lbs
Height
cm
ft/ inch
Date of Birth setting order
day - month - year
month - day - year
1. In the Time of Day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Scroll up or down until USER SET is displayed.
4. Press OK to start the user information settings.
Weight (lbs or kg)
5. Scroll up or down to adjust your weight.
Press and hold signal/
light button to change
Press OK.
the units for weight or
height.
Height (ft/ inch or cm)
6. Scroll up or down to adjust your height.
Press OK.
B 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Date of Birth (Birthday)
7. Scroll up or down to adjust your month or
day of birth. Press OK.
8. Day / Month appears. Scroll up or down to
adjust the value. Press OK.
Units 1: setting order
is day - month - year.
Units 2: setting order
is month - day - year.
9. Year appears. Scroll up or down to adjust the year of birth. Press OK.
Sex
10. Scroll up or down to select your gender. Press OK.
Activity Level (Activity)
11. Scroll up or down to select your activity level for Polar Fitness Test.
Press OK.
Assess your long-term physical activity level. Do not change your activity
level description if your regular exercise habits have changed during the
last six months.
Low
You do not participate regularly in programmed recreational sport or
heavy physical activity. Ex. you walk only for pleasure or occasionally
exercise sufficiently to cause heavy breathing or perspiration.
Middle You participate regularly in recreational sports. Ex. you run 3-6 miles /
5-10 km per week or spend 1/2–2 hours per week in comparable
physical activity or, your work requires modest physical activity.
High
You participate regularly, at least 3 times a week, in heavy physical
exercise. Ex. you run 6-12 miles / 10-20 km per week or spend 2-3
hours per week in comparable physical activity.
B 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Top
You participate regularly in heavy physical exercise at least 5 times a week.
Ex. you exercise to improve performance for competitive purposes.
Maximum Heart Rate Value (HRmax
)
12. Your age-predicted maximum heart rate value is displayed as a default
setting when you set this value for the first time. If you know your
exact clinically tested current maximum heart rate value, set the
value by scrolling up or down.
13. Press OK.
If you do not know this value, update it in the Fitness Test mode after
having carried out the Polar Fitness Test.
Maximal Oxygen Uptake Value (VO2max
)
14. The wrist receiver suggests value 35 for females and value 45 for males
as a default setting when you set this value for the first time. If you
know your exact clinically tested current maximal oxygen uptake
value, set the value by scrolling up or down.
15. Press OK. USER SET appears.
If you do not know this value, update it in the Fitness Test mode after
having carried out the Polar Fitness Test.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
B 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Exercise Settings
When you start setting your exercise preferences your first choice is to select
whether you want to set your personal exercise set or to exercise with
BasicUse option. If you select to start setting the exercise sets, your second
choice is whether you want to select BasicSet or an Interval Training Set.
Selecting Exercise Type
BasicUse (E0)
Exercise Set (E1-E5)
BasicUse is a simple mode for exercising. During exercising with this mode you
You do not have to do any settings
before exercising with this Exercise
mode. While exercising, you can see
can see the same optional values as
in the BasicUse mode. Additionally,
the exercise set will guide you
the following optional values on the through an exercise according to the
display:
settings you have made. You can also
name the exercise sets Ex. after an
exercise type.
• current heart rate or average
heart rate of the exercise
• stopwatch
• time of day
• split- and lap times
You can set following exercise
guiding functions:
• 3 heart rate limits
• 3 countdown timers
• interval function
Additionally, you can follow calories
of your exercise session and
percentage of your maximum heart
rate, if you have set all the user
information and turned the functions
on.
• recovery calculation
B 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Exercise Sets
Preset exercise sets ready for five exercise sets; when you start exercising,
just select one of the sets.
Interval Training Set
BasicSet
If you choose interval on, you can
set 3 different exercise phases for
If you choose interval off, you can
set the following functions to your
each exercise set in following order: exercise:
Warm-up phase
• timer 1
On/OFF • timer 2
On/OFF • timer 3
On/OFF
On/OFF
On/OFF
On/OFF
On/OFF
On/OFF
On/OFF
• countdown timer 1
• heart rate limits 1
Interval phase
• interval calculation type: manual,
time- or heart-rate-based interval
• heart rate limits 1
• heart rate limits 2
• heart rate limits 3
• number of repeated interval phases • recovery calculation
• heart rate limits 2
• time- or heart-rate-based
recovery calculation
Cool-down phase
On/OFF
On/OFF
You should select the timers on
sequentially. Ex. you cannot set
timer 2 on if timer 1 is off.
• countdown timer 3
• heart rate limits 3
On/OFF
On/OFF
If you set the countdown timers of
the phase off, you have to manually
stop the phase.
B 22
Download from Www.Somanuals.com. All Manuals Search And Download.
1. In the Time of Day display
scroll up or down until
OPTIONS is displayed.
2. Press OK to enter the
Options mode. EXERCISE
SET is displayed.
Options
Exercise Set
E0
E1
E2
E3
E4
E5
3. Press OK to start the exercise settings. BasicUse E0 or exercise set E1-E5
is displayed.
4. Scroll up or down until the desired exercise type is displayed. Press OK.
If you chose BasicUse (E0): to return to the Time of Day display, press
and hold the stop button and skip the rest of the exercise settings.
If you chose exercise set (E1-E5) Interval On/OFF is displayed.
5. Scroll up or down to turn the interval function on or off. Press OK.
Timer 1 is displayed.
Exercise Set 1 - 5
Interval On Interval OFF (BasicSet)
Timer 1 Timer 2 Timer 3
Recovery Hr
Limits 1
Limits 2
Limits 3
Recovery Timer
Timer 1
Limits 1
Interval
Timer
Repeat
Interval
Limits 2
Recovery
Timer
Timer 3
Limits 3
Manual Interval
Interval Hr
Recovery Hr
B 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Timers
If you start from the Time of Day display, repeat steps 1-5.
6. Scroll up or down until desired timer is displayed. Press OK to start
setting the timer.
7. Scroll up or down to turn the timer on or off. Press OK.
Timer OFF: Skip steps 8-9.
8. Scroll up or down to adjust minutes. Press OK.
9. Scroll up or down to adjust seconds. Press OK.
Setting Heart Rate Limits
If you start from the Time of Day display, repeat steps 1-5.
6. Scroll up or down until desired Limits is displayed.
7. Press OK to start setting the limits.
8. Lim High appears. Scroll up or down to adjust your upper limit. Press OK.
9. Lim Low appears. Scroll up or down to adjust your lower limit. Press OK.
Turning Heart Rate Limits on/off
If you start from the Time of Day display, repeat steps 1-5.
6. Scroll up or down until desired Limits is displayed.
7. Press and hold the signal/light button to turn limits on or off. Release.
B 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Interval Type
You can select 3 optional types of intervals:
A. Time-based interval
Ends your interval when you have
used the selected time.
B. Heart-rate-based interval
Ends your interval as you reach the
selected heart rate.
When selecting heart-rate-based
interval, recovery calculation must be
set on.
C. Manual interval
End the interval training session
by pressing and holding OK.
If you start from the Time of Day display, repeat steps 1-5.
6. Scroll up or down until Interval TIMER/ HR/ MANUAL is displayed. Press
OK to start setting the interval type. TIMER/ HR/ MANUAL is flashing.
7. Scroll up or down to select the interval type that will be used to end the
interval. Press OK. If you chose manual interval skip steps 8 - 9.
A. Time-based interval
8. Scroll up or down to adjust
minutes. Press OK.
9. Scroll up or down to adjust
seconds. Press OK.
Or
B. Heart-rate-based interval
8. Scroll up or down to adjust the
heart rate that will end your
interval. Press OK.
Interval Hr appears.
Interval TIMER appears.
B 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Number of Intervals and Recoveries (Repeat)
If you start from the Time of Day display, repeat steps 1-5.
You can set up to 30 intervals and recoveries (if set on) for an interval phase.
6. Scroll up or down until Repeat is displayed.
7. Press OK to start setting the number.
8. Scroll up or down to adjust the number. Press OK.
Or
If you do not know in advance the number of intervals and recoveries select
continuous interval. The intervals will succeed until you manually stop the
exercise or until 30 intervals have been made.
8. Scroll down until Cont
appears. Press OK.
Setting Recovery Calculation
A. Time-based recovery
Ends your recovery as you reach the
preset time.
B. Heart-rate-based recovery
Ends your recovery as you reach the
preset heart rate.
If you start from the Time of Day display, repeat steps 1-5.
6. Scroll up or down until Recovery TIMER/ Hr is displayed.
7. Press OK to start setting recovery calculation on or off. On/OFF is flashing.
8. Scroll up or down to turn the recovery calculation on or off. Press OK.
OFF: skip steps 9-11.
On: TIMER/ Hr is flashing.
9. Scroll up or down to select recovery timer or heart rate. Press OK.
B 26
Download from Www.Somanuals.com. All Manuals Search And Download.
A. RecoTime is displayed.
10. Scroll up or down to adjust minutes. Press OK.
11. Scroll up or down to adjust seconds. Press OK.
Recovery TIMER appears.
B. RecoHr is displayed.
10. Scroll up or down to adjust the value. Press OK.
Recovery Hr appears.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
Naming Exercise Sets
You can name the exercises, with seven letters, numbers or punctual marks.
The available digits are: 0-9, space, A-Z, a-z, - % / ( ) * + : ?.
1. In the Time of Day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Press OK. E0 - E5 is displayed.
4. Scroll up or down until desired exercise set (E1 - E5) is displayed.
5. Press and hold signal/light button. Adjustable letter is flashing.
6. Scroll up or down to select the desired mark. Press OK.
7. Repeat previous step until you have chosen all 7 letters.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
B 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning Functions on/off
1. In the Time of Day display
scroll up or down until
OPTIONS is displayed.
2. Press OK to enter the
Options mode. EXERCISE
SET is displayed.
Options
Function Set
OwnCal On/OFF
Fit. Test On/OFF
HRmax-p On/OFF
3. Scroll up or down until FUNCTION SET is displayed.
4. Press OK to start the function settings. OwnCal is displayed.
To set the following functions on you have to set your user information.
If kg/lbs are displayed as you start setting the function on, the wrist
receiver points out that you have not set your all user information.
OwnCal Calorie Counter on/off
If you start from the Time of Day display, repeat steps 1-4.
5. Press OK to start setting the OwnCal function. On/OFF starts to flash.
6. Scroll up or down to set the OwnCal on or off. Press OK.
To get the most accurate OwnCal results, update the VO2max setting and the
HRmax setting with clinically measured values (if available). If you do not
know your clinically measured values perform Polar Fitness Test and update
the OwnIndex and HRmax-p settings in Fitness Test mode.
B 28
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitness Test on/off
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until Fit. Test is displayed.
6. Press OK to start setting the fitness test. On/OFF starts to flash.
7. Scroll up or down to set the fitness test on or off. Press OK.
Predicted Maximum Heart Rate on/off (HRmax-p)
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until HRmax-p is displayed.
6. Press OK to start setting the HRmax-p. On/OFF starts to flash.
7. Scroll up or down to set the HRmax-p on or off. Press OK.
HRmax-p can be turned on only if Polar Fitness Test is on.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
B 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor Settings
1. In the Time of Day display scroll up
or down until OPTIONS is displayed.
2. Press OK to enter the Options mode.
EXERCISE SET is displayed.
Options
Monitor Set
Sound On/OFF
Units 1/2
Help On/OFF
3. Scroll up or down until MONITOR
SET is displayed.
4. Press OK to start the monitor settings. Sound is displayed.
Turning Activity/Button Sound on/off
If you start from the Time of Day display, repeat steps 1-4.
5. Press OK to start setting the sound. On/OFF starts to flash.
6. Scroll up or down to set sound on or off. Press OK.
Your receiver has two distinct sounds: activity/button sound and alarms for
heart rate zones, watch and fitness test. This setting includes only the
activity/button sound settings. Certain Measure and Exercise mode settings
will be audible: start, stop, interval phase start and end and recovery
calculation end.
Selecting Measuring Units
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until Units is displayed.
6. Press OK to start setting the units. 1 or 2 starts to flash.
7. Scroll up or down to select the unit which best suits you. Press OK.
B 30
Download from Www.Somanuals.com. All Manuals Search And Download.
The units settings affect the units in the user information settings and the
order of your date of birth settings.
Units 1: kg, cm, day-month-year
Units 2: lbs, feet, month-day-year
Turning Help on/off
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until Help is displayed.
6. Press OK to start setting the Help function. On/OFF starts to flash.
7. Scroll up or down to set the Help on or off. Press OK.
If you turn Help on, the flashing arrows guide you to use the correct
buttons in the Options and File modes. If you want to change the middle
row information during exercise, the function name will appear for a few
seconds.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
B 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Watch Settings
1. In the Time of Day display scroll up
or down until OPTIONS is displayed.
2. Press OK to enter the Options mode.
EXERCISE SET is displayed.
3. Scroll up or down until WATCH SET
is displayed.
Options
Watch Set
Alarm
Time 1/2
Date
4. Press OK to start the watch settings. ALARM is displayed.
Setting Alarm
If you start from the Time of Day display, repeat steps 1-4.
5. Press OK to start alarm settings. On/OFF starts to flash.
6. Scroll up or down to set alarm on or off.
OFF: skip steps 7 - 9.
Press OK. 24h: skip step 7.
7. 12h: AM/ PM starts to flash. Scroll up or down to select AM or PM. Press OK.
8. The hours start to flash. Scroll up or down to adjust the hours. Press OK.
9. The minutes start to flash. Scroll up or down to adjust the minutes. Press OK.
When the alarm comes on, it will sound for one minute or you can turn it
off by pressing any of the five buttons.
Setting Time of Day
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until TIME1/ TIME2 is displayed.
6. Press OK to start setting the Time of Day.
7. Time is flashing. Scroll up or down to select time 1 or time 2. Press OK.
B 32
Download from Www.Somanuals.com. All Manuals Search And Download.
8. 12h/ 24h starts to flash. Scroll up or down to select 12h or 24h time
mode. Press OK. 24h: skip step 9.
9. AM/ PM starts to flash. Scroll up or down to select AM or PM. Press OK.
10. The hours start to flash. Scroll up or down to adjust the hours. Press OK.
11. The minutes start to flash. Scroll up or down to adjust the minutes.
Press OK.
Setting Date
If you start from the Time of Day display, repeat steps 1-4.
5. Scroll up or down until DATE is displayed.
12h Time mode:
month - day - year.
24h Time mode:
6. Press OK to start adjusting the date.
7. Month / Day appears.
Scroll up or down to select the desired value.
Press OK.
day - month - year.
8. Day / Month appears.
Scroll up or down to select the desired value. Press OK.
9. Year digits start to flash.
Scroll up or down to select the year. Press OK.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
B 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Tips
Swap Time 1 or Time 2
In the Time of Day display press and hold the down button. Time 1 or
Time 2 is displayed in the uppermost row for a few of seconds. Displayed
time will now be used in all watch and alarm functions. If you chose time 2,
“2” is displayed in the Time of Day display.
Shortcut to Watch Setting Loop
Press and hold the signal/light button for a few of seconds to enter into the
watch setting loop. If you want to skip some parts and go directly to a
watch function, scroll up or down button until the desired watch function
is displayed. Set the function as in the “Watch settings” section.
Swap Measuring Units
As you set your user information on weight and height. Press and hold the
signal/light button until the units are swapped. Release the button.
Swap Date and User ID Number with Polar S410
You are able to set a user ID by Polar Precision Performance software.
When set, the user ID number is shown on the upper row of the Time of
Day display. You can swap the user ID and date by pressing and holding the
up button.
B 34
Download from Www.Somanuals.com. All Manuals Search And Download.
C. EXERCISE
You can use two modes in your
Time of Day
exercise: Measure or Exercise mode.
In the Measure mode you can see your
heart rate but your exercise is not
recorded. In the Exercise mode your
exercise is recorded and stopwatch
and other calculations are started.
Heart Rate Measure mode
Exercise recording mode
Heart Rate Measure Mode
1. Wear the transmitter and the wrist receiver as described in “Easy start” section.
2. To make sure that the code search will be successful:
•
•
Keep the wrist receiver within 3 feet/ 1 meter of your transmitter.
Check that you are not near: people with heart rate monitors, high
voltage power lines, televisions, mobile phones, cars, motor driven
exercise equipment or other electromagnetic disturbance.
C 35
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Start from the Time of Day display by pressing the OK to start measuring
your heart rate. A heart symbol will start flashing and your heart rate in
beats per minute will appear in max. 15 seconds. The frame around the
heart symbol indicates that the heart rate reception is coded.
The following display appears as you enter the Measure mode. You can
change this display to Stopwatch display by pressing the up or down button.
Exercise name
Time of Day
Current heart rate
BasicUse (E0) or
Exercise set in use (E1-E5)
The receiver returns automatically to the Time of Day display within
5 minutes if there is no heart rate reception.
C 36
Download from Www.Somanuals.com. All Manuals Search And Download.
Exercise Recording Mode
If you are continuing from the Measure mode, press OK.
Or, if you are starting from the Time of Day display, press and hold OK.
Exercise information will be stored in a complete exercise file only when
the stopwatch is running. The ongoing recording is indicated with a
graphic bar that runs continuously on the display.
If there is 00 / - - reading on the display, there is no heart rate reception.
Bring the wrist receiver up to your chest near the transmitter’s Polar logo.
The receiver starts looking for the heart rate signal again.
At the start of your workout, when it has lasted less than 60 minutes,
the exercise time is displayed in minutes and seconds. When you have
exercised more than 60 minutes, the exercise time is displayed in hours
and minutes.
Turning the Heart Rate Zone Alarm on/off
Press and hold the signal/light button.
When appears on the display the zone alarm is on. You will hear a
beeping sound with each heartbeat if your heartbeat is outside the heart
rate limit. If you do not want to use the zone alarm the flashing heart rate
reading indicates if your heartbeat is outside the heart rate limit. This
function can be used if you have set heart rate limits on in Interval Training
Set or BasicSet.
C 37
Download from Www.Somanuals.com. All Manuals Search And Download.
In addition to the alarm you can see:
if you are exercising above heart rate zone.
if you are exercising below heart rate zone.
Swapping the Heart Rate Limits
Press and hold the up button. Repeat until the desired limits are displayed.
In the Interval Training mode the limits are automatically swapped when
the phase changes to the preset limits.
You have three optional Exercise modes depending on the selected
exercise:
• BasicUse
• Interval Training Set (Int On)
• BasicSet (Int OFF)
The following functions can be used during all three optional Exercise modes.
Illuminating the Display
Press the signal/light button.
After you use backlight once in the Measure mode, the receiver automatically
illuminates the display if you: start or stop the exercise session, store lap
information and at the end of an interval and a recovery calculation.
C 38
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Lap and Split Time
Press OK to store lap and split time.
First
Then
Lap time
Split time
Average heart
rate of the lap
Number of
the lap
The receiver automatically stores a lap time when you stop recording
an exercise. You can store 99 laps if you have not used the interval
function. After storing 99 laps FULL appears for a few seconds every
time you take a lap. You can continue taking laps but they will not be
stored. The wrist receiver continues recording all other information of
the exercise, except lap and interval information.
Pausing the Exercise
Press the stop button.
The exercise recording, stopwatch and other calculations are paused. To
continue them, press OK. Or, to return to the Time of Day display, press and
hold the stop button.
The receiver automatically returns to the Time of Day display within
5 minutes if you forget to quit the heart rate measuring after having
stopped the stopwatch and taken the transmitter off your chest.
C 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Swapping the Displayed Exercise Information
There are three display options, which you can swap between by pressing
the down button. The receiver saves the upper and lower row settings for
the three display options. If the Help function is on, the name of the
selected function appears for a few seconds. When you start the exercise
next time the stopwatch appears on the middle row and the saved
functions appear on the upper and lower rows.
Time of Day
Stopwatch
Current
Time of Day
Lap time
Stopwatch
Time of Day
heart rate
Number of the lap
Phase Name
Countdown
timer
When you have set your Interval Training
Set on, you will have one extra display in
addition to the three primary displays.
You can only change the lower row for this
display. See the alternative phase displays
from “Exercising with Interval Training
Set” section.
You can configure the middle and upper rows either in the Measure
mode or during the exercise.
C 40
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the Middle Row Information
1. Press the down button to select the desired display alternative. When
you swap the middle row information, the upper and lower rows
change also. Continue selecting the upper and lower rows.
Select the Upper Row Information
2. Press the up button to select from the following: Time of Day (Time),
stopwatch (Sw), lap time (Lp) or calorie expenditure (Cal) if OwnCal is
set on.
You cannot select the same displayed function to the upper and middle row
i.e. the option on the middle row is no longer available for the upper row.
Select the Lower Heart Rate Information Row
3. Press and hold the down button to select from the following: Current
heart rate, average heart rate (AVG) or the reading in percentages of
your maximum heart rate (% MAX) if you have set your user information.
You can only change the displayed function of the lower row if the
stopwatch is on.
Resetting the Stopwatch to Zero
1. Pause your exercise.
2. Press and hold the down button until the stopwatch is reset. Release.
3. Press OK to restart the stopwatch and recording. Or, to return to the
Time of Day display, press and hold the stop button. As a result of
resetting your stopwatch the recorded file is deleted.
C 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting an Exercise Set
1. Start from the Time of Day display. Press OK to enter the Measure mode.
2. If you want to swap the preset exercise set, press and hold the up
button until the exercise set (E1-E5) is swapped. Release. Repeat until
desired exercise set is displayed.
3. To start exercising and recording the preset exercise type press OK.
Exercising with Interval Training Set (Int On, E1-E5)
In this mode you can also use the functions in “Exercise recording mode”
section.
The Interval Trainer automatically guides you through your exercise. In
order to hear the activity sounds when the phase starts and stops make
sure the activity/button sound is on. If you have turned the countdown
timer of the phase off, you have to stop the phase manually by pressing
and holding the OK button. When the stopwatch starts running
indicates that Interval Trainer is on. As the interval training exercise ends
the receiver automatically starts a BasicUse exercise, which is recorded to
the same complete file as your interval training exercise.
C 42
Download from Www.Somanuals.com. All Manuals Search And Download.
Structure of an interval training exercise:
Heart
Interval Phase
rate
Repeats 03
160
140
120
WarmUp phase
Countdown timer 1
Heart rate limits 1
CoolDown phase
Countdown timer 3
Heart rate limits 3
100
80
60
40
0
10
20
30
40
50 Time
Warm-up Phase
1. First
Heart rate limits 1 (if set on).
2. Then
Countdown timer 1.
Heart rate information.
Countdown timer starts running if you have set the timer
1 on. If you have set the timer off, press and hold OK and
continue from the interval phase.
3. At the end of warm-up phase
Warm-up phase duration.
Average heart rate of the warm-up phase.
C 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Interval Phase
The receiver records up to 30 repeated interval phases. Your interval phase
is divided into interval and recovery calculation (if set on) sections, which
alternate continuously through your interval phase.
Interval Session
1. First
Preset heart rate limits 2 (if set on).
2. Then
One of the following is displayed depending on your settings:
A. manual, B. time-based or C. heart-rate-based interval.
A. Manual interval.
Number of set intervals.
Current interval number.
If you selected manual interval your interval will end as you
press and hold OK.
Or
B. Time-based interval.
Countdown timer.
If you selected time-based interval your interval will end as
you reach the preset time.
Or
C. Heart-rate-based Interval.
The difference between the preset interval heart rate and
current heart rate.
If you selected heart-rate-based interval your interval will
end as you reach the preset heart rate reading.
C 44
Download from Www.Somanuals.com. All Manuals Search And Download.
3. At the end of Interval
Interval duration.
Average heart rate of the interval.
When your interval ends the wrist receiver automatically
continues with following preset function: recovery
calculation or cool-down phase.
Recovery Calculation
One of the following is displayed depending on your
settings: A. time-based recovery calculation or
B. heart-rate-based recovery calculation.
A. Time-based recovery.
Recovery countdown timer.
Current heart rate.
Or
B. Heart-rate-based recovery.
The difference between the preset recovery heart
rate and current heart rate.
Current heart rate.
You will hear two beeps when the recovery calculation is done.
At the end of recovery
Recovery heart rate or time.
Recovery duration.
Drop in your heart rate.
C 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cool-down Phase
1. First
Preset heart rate limits 3 (if set on).
2. Then
Countdown timer 3.
Heart rate information.
Countdown timer starts running if you have set the timer 3
on. If you have set the timer off press and hold OK to end
the cool-down phase.
3. At the end of cool-down phase
Cool-down phase duration.
Average heart rate of the cool-down phase.
After your cool-down phase has ended the receiver
automatically continues exercise recording with
BasicUse mode.
You can continue using the heart rate limits of the interval exercise in this
mode too. Or, if you want to do another interval training exercise, press
and hold the OK button.
C 46
Download from Www.Somanuals.com. All Manuals Search And Download.
Interrupting an Interval Training Exercise
1. Press the stop button to pause the exercise.
2. Press and hold the stop button to return to the Time of Day display.
Or
Press the stop button. BasicUse appears. You can continue measuring your
heart rate in this mode (Measure mode). To continue exercising with
BasicUse and recording your exercise information press OK. You can
continue using and swapping the same heart rate limits of the previous
exercise. Repeat steps 1 and 2 to return to the Time of Day display.
Exercising with BasicSet (Int OFF, E1-E5)
In this mode you can also use the functions in “Exercise recording mode”
section.
Starting the Timers
If timers are set on, they automatically start running once you start the
stopwatch. Timers alternate in the following order: timer 1, 2, 3, 1, 2, 3, etc.
At the end of timer 1 you will hear 1 beep, at the end of timer 2 you will
hear 2 beeps and at the end of timer 3 you will hear 3 beeps. Timers stop
running when you stop the stopwatch.
C 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting Recovery Calculation
To start the recovery calculation, press and hold the OK button.
Depending on your setting RecoHr or RecoTime appears in the upper row
of the display. See “Exercising with Interval Trainer”/ “Recovery calculation”
for the displayed information during the recovery calculation. After the
recovery calculation is done the exercise is paused. You can continue the
exercise by pressing the OK button after the recovery calculation. If you do
another recovery calculation, the recovery information will be deleted in
consequence.
Stopping the Exercise
1. Press the stop button to pause the exercise.
2. Press and hold the stop button until time of day is displayed.
Your lap and split time are automatically recorded, when you end the
exercise.
C 48
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips During the Exercise
Checking the Heart Rate Limits and Illuminating the Display
Bring the wrist receiver near the transmitter’s Polar logo. The backlight is
turned on for a few of seconds. The current heart rate limits of the exercise
are displayed.
Swapping the Exercise Type (E0 or E1 - E5)
In the Measure mode press and hold the up button. Release. Repeat until
desired exercise set or BasicUse is displayed.
Restarting the Interval or Recovery Calculation
In the Exercise mode press the stop button to pause the interval or recovery
calculation. Reset the calculation by pressing and holding the down button.
To restart the same calculation press the OK button. To reset the interval
training exercise, see “Resetting stopwatch to zero” section.
Interrupting an Interval or Recovery Calculation
Press and hold the OK button during your interval training exercise session
to interrupt the calculation. The following section automatically starts. Ex.
if you interrupt an interval your recovery calculation (if set on)
automatically starts.
Interrupting a Phase of an Interval Training Exercise
Press the stop button to pause your phase. Press and hold the OK button.
The following phase automatically starts.
C 49
Download from Www.Somanuals.com. All Manuals Search And Download.
D. HOW TO RECALL TRAINING
INFORMATION
The receiver starts saving your exercising
information as you start the stopwatch. You can
recall the information in the File mode. The receiver
stores one complete training file at a time. Your
latest exercise is stored in a complete file until the
next time you start the stopwatch. Then your
previous complete file is compressed to a summary
file. The summary file includes in addition to the
main exercise information the exercise time and
maximum and average heart rates of your exercise.
The receiver saves five summary files.
D 50
Download from Www.Somanuals.com. All Manuals Search And Download.
Time of Day
File
F6
Options
Fit. Test
F3
Connect
F1
F5
F4
F2
Your complete file is F1 the very first time, then F2 and so on, until you
have recorded 6 files. Then F6 always indicates the latest complete file and
F1 to F5 are the summary files. The bigger the file number the more recent
it is.
Some information alternates on the display automatically. You can
fasten alternation by pressing the OK button. Ex. the target zone
information or heart rate information.
1. In the Time of Day display scroll up or down until FILE is displayed.
2. Press OK to enter the File mode. The main information of your file is
displayed.
Starting date and time alternate on the display.
Exercise name
File number
Used exercise set (E5-E1)
or BasicUse (E0)
3. If you wish to recall a file, scroll up or down until the desired file is
displayed.
4. Press OK to start recalling the file. Exe. Time is displayed.
D 51
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
Move forward and backward within file loops with up or down buttons.
Press OK to enter a file or to enter a deeper level in the file loop.
Press the stop button to move backward to the previous file level.
Press and hold the stop button to return the Time of Day display,
wherever you are in the File recalling cycle.
Complete File
Exe. Time
Reco
Limits
InZone1
Reco 30
InZone2
Int 30
InZone3
KCal
Lap 99
Tot. KCal
Tot. Time
EXE. SET
LAPS
CoolDown
Interval
Reco 1
Int 1
Lap1
WarmUp
Best Lap
D 52
Download from Www.Somanuals.com. All Manuals Search And Download.
Exercise Time (Exe. Time)
The exercise time is the amount of time that you have
exercised with the stopwatch running. Average and
maximum heart rates of your exercise alternate on the
display. To continue recalling the complete file, scroll up
or down button.
This is the first opening display that you will see in both
summary and complete files. The summary file does not
include any more information. To exit the summary file
press the stop button.
Recovery Information of BasicSet Exercise (Reco)
Recovery time.
Recovery duration.
Drop in your heart rate.
Or
Recovery heart rate.
Time it took reach the preset heart rate reading.
Drop in your heart rate.
Heart Rate Limits 1, 2 and 3 (Limits 1/ Limits 2/ Limits 3)
Settings of the heart rate limits alternate on the display.
Limits 1 are used for heart rate zone 1, limits 2 for zone 2
and limits 3 for zone 3.
D 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Exercise Time Within, Above and Below the Heart Rate Zones
Indicates the exercise time, which you have spent within (InZone), above
and below each heart rate limits during the entire exercise.
Calorie Expenditure (KCal)
You will see how many kilocalories you have expended during the exercise.
Cumulative Calorie Count (Tot. KCal)
Calculates the cumulative calories expended during several exercise sessions
starting from the previous resetting. This function allows you to follow the
calorie count as a gauge of effective exercise Ex. during one week.
Cumulative Exercise Time Count (Tot. Time)
This function counts cumulative exercise time expended during several
exercise sessions starting from the previous resetting. It allows you to
follow the exercise time count as a gauge of amount of exercise Ex.
during one week.
Your cumulative total time is displayed in hours and minutes until 99
hours 59 minutes is reached. After this your cumulative exercise time is
displayed in hours until 9999 hours is reached.
D 54
Download from Www.Somanuals.com. All Manuals Search And Download.
Interval Training Information (EXE. SET)
Start with the display showing EXE. SET.
1. Press OK to start recalling the interval training information.
2. Scroll up or down to see the information on warm-up, interval and cool-
down phases.
Warm-up Phase
Warm-up duration.
The heart rate at the end of the warm-up,
average and
maximum heart rates of your warm-up phase.
Interval Phase
Interval phase duration.
Average heart rate of intervals and recoveries.
Cool-down Phase
Duration of the cool-down.
The heart rate at the end of the cool-down,
average and
maximum heart rates of the cool-down phase.
3. Press the stop button to return to the previous file level and skip steps
4 - 6. Or, continue recalling more detailed information of the interval
phase.
4. Start with the display showing Interval. Press OK to see details of each
interval and recovery.
5. Scroll up or down between intervals (Int) and recoveries (Reco).
D 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Interval information
Interval number
Split time of the interval
Interval duration.
The heart rate at the
end of the interval,
average and
maximum
heart rates of the
selected interval.
Recovery information
Time-based recovery.
Recovery duration.
Drop in your heart rate.
Or
Heart-rate-based recovery.
Time it took reach the preset heart rate reading.
Drop in your heart rate.
6. To continue recalling, Ex., lap information press the stop button twice.
Scroll up or down until LAPS is displayed.
D 56
Download from Www.Somanuals.com. All Manuals Search And Download.
Lap Information (LAPS)
Start with the display showing LAPS and number of the recorded laps.
1. Press OK to start recalling the lap information.
2. Scroll up or down to see the following information:
Best Lap
Shortest lap time.
The number of the best lap.
The best lap information is displayed if you have stored at least
3 laps. The best lap can not be the last lap.
Laps
Split time.
Lap time.
Lap number.
The heart rate at the end of the lap,
average and
maximum heart rates of the lap.
Press the stop button to exit the LAPS display.
Press and hold stop to return to the Time of Day display.
D 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting Your Cumulative Counts to Zero (Tot. KCal and Tot. Time)
Once your have reset the cumulative count you cannot retrieve it.
Start with the display showing Tot. KCal or Tot. Time.
1. Press OK to start resetting the desired total count. Reset appears and
the value starts to flash.
2. Press and hold the down button. Reset starts to flash. You can still
cancel the resetting by releasing the down button before the value is
reset. If you are sure that you want to reset the value keep holding the
down button until value is reset. Release.
3. Press the stop button to exit the reset display. Press and hold the stop
button to return to the Time of Day display.
D 58
Download from Www.Somanuals.com. All Manuals Search And Download.
E. CONNECTION TO
COMPUTER
Your Polar S410/S210 offers you the option of transferring
Additionally you can transfer settings with Polar S410 from the
software instead of entering them manually. To be able to use
the UpLink, you need a PC with a sound card (compatible with
Sound Blaster™) and dynamic loudspeakers or headphones.
The Polar S410 records essential data for your training log.
A training log makes it possible to plan future training and to
define the most suitable interval training for maximizing
performance capacity.
E 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Downloading Training Data to a Computer with
Polar Precision Performance Software
Sampling rate Exercising time
Polar S410 offers an easy way to
analyse training data by
15 s
- 30 min
30 s
30 min - 1 h
1 h - 2 h
2 h - 4 h
4 h - 8 h
8 h – 16 h
computer afterwards. It starts
recording at a sampling rate of 15
seconds up to 120 samples. When
the memory is full, it is compressed
and a longer averaging period is
used (30 s, 1 min, 2 min, 4 min or
1 min
2 min
4 min
8 min
8 min) depending on the recording time. Maximum recording time is 16
hours. The table shows the exercise times for each sampling rate.
To be able to transfer the recorded training information via SonicLink™
and to analyse it with Polar Precision Performance software version 4 or
later, you need a personal computer with a sound card and microphone.
To make sure that the training information transfer will be successful,
check that there are no interfering sounds near the computer.
You can transfer only your complete files to a computer
1. Start the software.
2. Activate the download function of the software and follow the
directions on screen.
3. If the receiver is in the Time of Day display scroll up or down until
CONNECT is displayed. Make sure that start is displayed.
E 60
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Bring and hold the back cover of the receiver next to the computer’s
microphone. Keep the back cover of the wrist receiver within 2" / 5 cm
of the microphone until the SonicLink sound has ceased.
5. Press the OK button to start the data transfer. SonicLink and COM
appear on the display.
You will hear a chirping sound (SonicLink) while the training
information is transferred to the computer. You can monitor
the transfer percentage from the receiver’s display. Press and hold the stop
button to return to the Time of Day display after data transfer.
You can interrupt the data transfer to the computer by pressing the stop
button during data transfer. CONNECT is displayed.
Transferring Settings from Computer with Polar Precision
Performance Software
Polar S410 offers you the option of transferring your settings with Polar
Precision Performance software version 4 or later to the wrist receiver. You
are also able to set a user ID number for easier recognition in multi-user
situations.
To be able to transfer the settings from Polar Precision Performance
software via Polar Uplink, you need a personal computer with a sound
card (compatible with Sound Blaster) and dynamic loudspeakers or
headphones.
E 61
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Start the software.
2. Activate the transfer function of the software and follow the directions
on screen.
3. If the receiver is in the Time of Day display scroll up or down until
CONNECT is displayed.
4. Place the receiver less than 4"/ 10 cm from the loudspeaker. Do not
move the receiver during the data transfer.
5. The receiver automatically starts to transfer the information.
UpLink and COM appear. You will hear a chirping sound while information
is transferred to the receiver. All settings are transferred completely to the
receiver when 100 % is displayed. Press and hold the stop button to return
to the Time of Day display after data transfer.
If the data transfer was unsuccessful bring the receiver closer to the
loudspeakers or turn the volume level of the loudspeakers up.
You may interrupt the data transfer from the computer by pressing the
stop button during data transfer. CONNECT is displayed.
E 62
Download from Www.Somanuals.com. All Manuals Search And Download.
F. POLAR FITNESS TEST
The Polar Fitness Test is an easy, safe and quick
way to estimate individual maximal aerobic power
and to get predicted maximum heart rate value.
The Polar Fitness Test is targeted to healthy adults.
OwnIndex
OwnIndex is a value which is comparable to maximal oxygen uptake
(VO2max), a commonly used descriptor of aerobic fitness. Cardiovascular
(aerobic) fitness relates to how well your cardiovascular system works to
transport and utilize oxygen in your body. The stronger and more efficient
your heart is, the better the cardiovascular fitness is. VO2max is a good
indicator of performance in endurance sports.
F 63
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to improve your cardiovascular fitness, it takes a minimum of
6 weeks on an average to see a noticeable change in OwnIndex. Less fit
individuals see progress even more rapidly and for more fit individuals
more time is needed. The better the cardiovascular fitness of an individual,
the smaller the improvements in OwnIndex.
Cardiovascular fitness is best improved by exercise types which employ
large muscle groups. Such activities include running, swimming, rowing,
skating, cross-country skiing, cycling and walking.
To monitor your fitness progress start with measuring your OwnIndex a few
times during the first two weeks, to get a baseline value. Thereafter, repeat
the test approximately once a month. OwnIndex is based on resting heart
rate, heart rate variability at rest, age, gender, height, body weight and
self-assessed physical activity.
F 64
Download from Www.Somanuals.com. All Manuals Search And Download.
Predicted Maximum Heart Rate (HRmax-p)
The HRmax-p definition is carried out simultaneously with the Polar Fitness Test.
The HRmax-p score predicts your individual maximum heart rate value more
accurately than the age-based formula (220-age). The age-based method
provides a rough estimation and may not be very accurate, especially for
people who have been fit for many years or for older people. The most
accurate way of determining your individual maximum heart rate is to have
it clinically measured (in maximal treadmill or bicycle stress test) by a
cardiologist or an exercise physiologist.
Your maximum heart rate changes to some extent in relation to your
fitness. Regular endurance exercise tends to decrease HRmax. There may also
be some variation according to the sport you participate in. For example,
running HRmax > cycling HRmax > swimming HRmax
.
HRmax-p gives the possibility of defining training intensities as percentages
of maximum heart rate and of following maximum heart rate changes due
to training, without an exhaustive maximal stress test. HRmax-p is based on
resting heart rate, heart rate variability at rest, age, gender, height, body
weight and maximal oxygen uptake, VO2max (measured or predicted). The
most accurate HRmax-p is obtained by entering your clinically measured
VO2max into the wrist receiver.
F 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitness Test Settings
To be able to carry out the Polar Fitness Test you need to do the following
settings in the Options mode:
•
•
•
Set your personal user information and long-term physical activity level.
Set the Polar Fitness Test on.
Set the HRmax-p on if you want to get a prediction of your maximum
heart rate.
Carrying Out the Test
To get reliable test results, the following basic requirements apply:
•
•
You should be relaxed and calm.
The test can take place anywhere – home, office, health club – as long
as the testing environment is peaceful. No disturbing noises
(Ex. television, radio or telephone), no other people talking to you.
Keep the testing place, time of day and environment the same every
time the test is repeated.
•
•
•
Avoid eating a heavy meal or smoking 2-3 hours prior to testing.
Avoid heavy physical effort, alcoholic beverages or pharmacological
stimulants on the test day and the day before.
F 66
Download from Www.Somanuals.com. All Manuals Search And Download.
Time of Day
File
Options
Fit. Test
Connect
1. In the Time of Day display scroll up or down until FIT. TEST is displayed.
If you cannot find Fitness Test mode check that you have turned the
function on in the Options mode.
2. Press OK to enter the Fitness Test mode. Your latest OwnIndex and the
testing date are displayed.
3. Scroll up or down to see your latest HRmax-p and the testing date.
4. Lie down and relax yourself for 1-3 minutes before the test.
Start the Test
It takes 3-5 minutes to carry out the test.
5. Press OK to start the test. The wrist receiver starts searching for your
heart rate. TEST On and your heart rate are displayed. The test begins.
6. Lie relaxed. Keep your hands beside your body and avoid body
movements. Don’t communicate with other people.
7. Your current OwnIndex and the testing date are displayed.
8. If HRmax-p is on: Scroll up or down to see the HRmax-p result and the
testing date.
Turn the Fitness Test Sound Signal on/off
The sound signal will alarm you at the end of the test. If the sound signal is
on appears on the display.
•
To turn the sound signal on or off either before or during the test, press
and hold the signal/light button.
F 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Interrupt the Test
•
You can stop the test any time during the test by pressing the stop button.
Failed TEST is displayed for a few seconds.
The latest OwnIndex and HRmax-p are not replaced.
If the wrist receiver does not succeed in receiving your heart rate at the
beginning or during the test, the test will fail. Check that the transmitter
electrodes are wet and the elastic strap is snug enough.
Update OwnIndex and HRmax-p
You can update your OwnIndex and HRmax-p values to the Options mode/
User information. When you update these values regularly, the reading in
percentages of your maximum heart rate and calorie calculation give more
accurate individual information.
1. In the Time of Day display scroll up or down until FIT. TEST is displayed.
2. Press OK to enter the Fitness Test mode.
3. Scroll up or down until Update USER SET is displayed. This display
appears if you have not updated your latest test results.
4. Press OK to update the OwnIndex and HRmax-p values.
5. To return to the Time of Day display, press and hold the stop button.
Your maximum heart rate value is updated if the HRmax-p is on.
F 68
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitness Classes
The Polar Fitness Test result, your OwnIndex, is most meaningful when
comparing your individual values and changes in them. OwnIndex can also
be interpreted according to your gender and age. Locate your OwnIndex
on the table to find your current cardiovascular fitness classification,
compared with those who are of the same age and gender.
Age
(years) (very
poor)
1
2
3
(fair)
4
5
6
7
(poor)
(average) (good)
(very
good)
57-62
54-59
52-56
49-54
47-51
44-48
42-46
40-43
37-40
(excellent)
20-24 < 32
25-29 < 31
30-34 < 29
35-39 < 28
40-44 < 26
45-49 < 25
50-54 < 24
55-59 < 22
60-65 < 21
32-37
31-35
29-34
28-32
26-31
25-29
24-27
22-26
21-24
38-43
36-42
35-40
33-38
32-35
30-34
28-32
27-30
25-28
44-50
43-48
41-45
39-43
36-41
35-39
33-36
31-34
29-32
51-56
49-53
46-51
44-48
42-46
40-43
37-41
35-39
33-36
>62
>59
>56
>54
>51
>48
>46
>43
>40
20-24 < 27
25-29 < 26
30-34 < 25
35-39 < 24
40-44 < 22
45-49 < 21
50-54 < 19
55-59 < 18
60-65 < 16
27-31
26-30
25-29
24-27
22-25
21-23
19-22
18-20
16-18
32-36
31-35
30-33
28-31
26-29
24-27
23-25
21-23
19-21
37-41
36-40
34-37
32-35
30-33
28-31
26-29
24-27
22-24
42-46
41-44
38-42
36-40
34-37
32-35
30-32
28-30
25-27
47-51
45-49
43-46
41-44
38-41
36-38
33-36
31-33
28-30
>51
>49
>46
>44
>41
>38
>36
>33
>30
The classification is based on literature review of 62 studies where VO2max was measured directly in healthy
adult subjects in the USA, Canada and 7 European countries. Reference: Shvartz E, Reibold RC: Aerobic
fitness norms for males and females aged 6 to 75 years: a review. Aviat Space Environ Med; 61:3-11, 1990.
F 69
Download from Www.Somanuals.com. All Manuals Search And Download.
For various fitness classes we recommend the following:
5-7 Maintain
current exercise
habits for good
health and
fitness.
4
To ensure good health,
maintain current exercise
habits. For fitness
improvement an increase in
exercise is recommended.
1-3 Increase exercise
for health
benefits and
fitness
improvement.
7
6
5
4
3
2
1
Top athletes typically score OwnIndex values above 70 (men) and 60
(women). Values as high as 95 can be reached by athletes of Olympic
caliber. OwnIndex is highest in sports that involve large muscle groups such
as cross-country skiing and cycling.
F 70
Download from Www.Somanuals.com. All Manuals Search And Download.
G. CARE AND
MAINTENANCE
Your Polar heart rate monitor is a high-tech instrument of
superior design and workmanship and should be treated with
care. The suggestions below will help you fulfill the warranty
obligations and enjoy this product for many years to come.
Taking Care of Your Polar Heart Rate Monitor
•
•
•
Wash the transmitter regularly after use with a mild soap and water
solution. Dry it carefully after washing with soft towel.
Never store the transmitter wet. Sweat and moisture can keep its electrodes
wet and the transmitter activated, which shortens the battery life.
Store your Polar heart rate monitor in a cool and dry place. Do not store
it in any kind of non-breathing material, such as a plastic bag or a sports
bag if it is wet.
•
•
Do not bend or stretch the transmitter. This may damage the electrodes.
Do not dry the transmitter in any other way than with a towel.
Mishandling may damage the electrodes.
•
•
Keep your Polar heart rate monitor out of extreme cold and heat. The
operating temperature is 14 ºF to 122 ºF/ -10 ºC to 50 ºC.
Do not expose the Polar heart rate monitor to direct sunlight for
extended periods, such as by leaving it in a car.
G 71
Download from Www.Somanuals.com. All Manuals Search And Download.
Batteries
Transmitter
The estimated average battery life of the transmitter is 2500 hours of
use. Contact authorized Polar service center for a replacement transmitter.
Polar recycles used transmitters. See your Customer Care Charter for
detailed instructions.
Wrist Receiver
The estimated average battery life of the wrist receiver is 2 years in
normal use (2h/ day, 7 days a week). Please note that excessive use of the
backlight and the alarm signals will drain the battery more rapidly.
Do not open the wrist receiver yourself. To ensure the water resistance
properties and the use of qualified components, the wrist receiver
battery should be replaced by an authorized Polar Service Center only.
At the same time a full periodic check of the Polar heart rate monitor
will be done.
Service
Should your Polar heart rate monitor need service, see the Customer Care
Charter to contact an authorized Polar Service Center.
Water resistance cannot be guaranteed after unauthorized service.
G 72
Download from Www.Somanuals.com. All Manuals Search And Download.
H. PRECAUTIONS
Using the Polar Heart Rate Monitor in a Water Environment
Your Polar heart rate monitor is water resistant to 160 feet/ 50 meters. To
maintain the water resistance, do not operate the buttons of the wrist
receiver under water.
Users measuring heart rate in a water environment may experience
interference for the following reasons:
•
•
•
Pool water with a high chlorine content and seawater are very
conductive. The electrodes of a Polar transmitter may become short
circuited which prevents EKG signals from detection by the transmitter
unit.
Jumping into the water or strenuous muscle movement during
competitive swimming may cause water resistance that shifts the
transmitter on the body to a location where it is not possible to pick up
EKG signal.
The EKG signal strength varies depending on the individual’s tissue
composition and the percentage of people who have problems in heart
rate measuring is considerably higher in a water environment than in
other use.
H 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Polar Heart Rate Monitor and Interference
Electromagnetic Interference
Disturbances may occur near high voltage power lines, traffic lights,
overhead lines of electric railways, electric bus lines or trams, televisions,
car motors, bike computers, some motor driven exercise equipment, cellular
phones or when you walk through electric security gates.
Crosstalk
The Polar wrist receiver in non-coded mode (mode is indicated by heart
symbol without frames) of operation picks up transmitter signals within 3
feet/ 1 meter. Non-coded signals from more than one transmitter picked up
simultaneously can cause an incorrect readout.
Exercise Equipment
Several pieces of exercise equipment with electronic or electrical
components such as LED displays, motors and electrical brakes may cause
interfering stray signals. To try to tackle these problems, relocate the Polar
wrist receiver as follows:
1. Remove the transmitter from your chest and use the exercise equipment
as you would normally.
2. Move the wrist receiver around until you find an area in which it
displays no stray reading or flashing of the heart symbol. Interference is
often worst right in front of the display panel of the equipment, while
the left or right side of the display is relatively free of disturbance.
3. Put the transmitter back on the chest and keep the wrist receiver in this
interference-free area as far as it is possible.
H 74
Download from Www.Somanuals.com. All Manuals Search And Download.
4. If the Polar heart rate monitor still does not work with the exercise
equipment, this piece of equipment may be electrically too noisy for
wireless heart rate measurement.
Minimizing Possible Risks in Exercising with a Heart Rate Monitor
Exercise may include some risk, especially for those who have been sedentary.
Before starting a regular exercise program an individual is recommended to
answer to the following questions for health status checking. If the answer
is yes to any of the questions, we recommend to consult a doctor before
starting an exercise program.
•
•
•
•
•
•
•
•
•
•
Have you not exercised for the past 5 years?
Do you have high blood pressure?
Do you have high blood cholesterol?
Do you have symptoms of any disease?
Are you taking any blood pressure or heart medication?
Do you have a history of breathing problems?
Are you recovering from a serious illness or medical treatment?
Do you use a pacemaker or another implanted electronic device?
Do you smoke?
Are you pregnant?
H 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Note that in addition to exercise intensity, medications for heart, blood
pressure, psyche, asthma, breathing etc. as well as some energy drinks,
alcohol and nicotine, can affect heart rate.
It is important to be sensitive to your body’s reactions during
the exercise. If you feel unexpected pain or tiredness regarding your
exercise intensity level, it is recommended to stop the exercise or
continue at a lighter intensity.
Notice to persons with pacemakers, defibrillator or other
implanted electronic device. Persons who have a pacemaker use the
Polar heart rate monitor at their own risk. Before starting use, we
always recommend an exercise test under doctor’s supervision. The test
is to ensure the safety and reliability of the simultaneous use of the
pacemaker and the heart rate monitor.
If you are allergic to any substance that comes into contact
with the skin or if you suspect an allergic reaction due to using
the product, check the listed materials in the "Technical
Specifications" chapter. To avoid any skin reaction risk with the
transmitter, wear it over a shirt. However, moisten the shirt well under
the electrodes to ensure flawless operation.
The combined impact of moisture and intense abrasion may cause a
black color, which might stain light-colored clothes especially, to come
off the transmitter's surface.
H 76
Download from Www.Somanuals.com. All Manuals Search And Download.
I. FREQUENTLY ASKED
QUESTIONS
What should I do if...
...I don’t know where I am in the Options or File cycle?
Press and hold the stop button until time of day is displayed.
...I cannot find the previous exercise’s file?
You may have used the Measure mode during your exercise, which means
that your exercise was not stored. To record the exercise you have to turn
the stopwatch on by pressing the OK button in the Measure mode.
...I cannot find the expended calories from my exercise file?
Check that you have set your personal user information and turned the
OwnCal function on. Check that your heart rate has reached over 90 bpm
or above 60 % of your maximum heart rate during your exercise.
...I cannot turn my HRmax-p on?
Check that you have set your personal user information and turned the
fitness test on before turning the HRmax-p on.
I 77
Download from Www.Somanuals.com. All Manuals Search And Download.
...there is no heart rate reading (- -)?
1. Check that the electrodes of the transmitter are moistened and that you
are wearing it as instructed.
2. Check that you have kept the transmitter clean.
3. Check that you are not near other people that have heart rate monitors,
high voltage power lines, televisions, mobile phones or other sources of
electromagnetic disturbance.
4. Have you had a cardiac event which may have altered your EKG
waveform? In this case consult your physician.
...the code search was not successful?
The frame around the heart symbol will disappear. Bring the receiver up to
your chest near the transmitter’s Polar logo. The receiver starts looking for a
heart rate signal again. If you still do not succeed in code searching, but
your heart rate is displayed and the heart symbol without a frame is
flashing, you can start exercising but your wrist receiver may become
disturbed by other heart rate monitors.
...heart symbol flashes irregularly?
1. Check that the wrist receiver is not further than 3 feet/ 1 meter from
the transmitter.
2. Check that the elastic strap has not become loose during exercise.
3. Make sure that the electrodes of the transmitter are moistened.
4. Make sure that there is no other heart rate transmitter within 3 feet/ 1 meter.
5. Cardiac arrhythmia may cause irregular readings. In this case consult
your physician.
I 78
Download from Www.Somanuals.com. All Manuals Search And Download.
...other person with heart rate monitor is causing interference?
Keep a distance from your training partner and continue your training
session normally.
Or
1. Take the transmitter off your chest for 30 seconds. Keep a distance from
your training partner.
2. Put the transmitter back and bring the receiver up to your chest near
the transmitter’s Polar logo. The receiver starts looking for a heart rate
signal again. Continue your training session normally.
...heart rate reading becomes erratic or extremely high?
You may have come within range of strong electromagnetic signals which
cause erratic readings. Check your surroundings and move further away
from the source of disturbance.
...the display is blank or fading?
If the display is blank, activate the wrist receiver by pressing the OK button
twice, after which the Time of Day display appears. The first sign of a
discharged battery is the battery symbol on the display. Also the digits fade
when the backlight is used. Have the batteries checked.
I 79
Download from Www.Somanuals.com. All Manuals Search And Download.
...there are no reactions to any buttons?
Reset the Polar heart rate monitor. Resetting clears watch settings which
will return to the default settings. User information and measuring units
settings will be saved.
1. Press the RESET button with a pen tip. Display becomes full of digits.
If you don’t press any button after reset within one minute the wrist
receiver goes to the Time of Day display.
2. Press any of the buttons once. The time of Day is displayed.
...the battery of the wrist receiver must be replaced?
We recommend having all service done by an authorized Polar Service
Center. This is especially necessary to ensure the warranty remains valid and
is not affected by incorrect repair procedures done by an unauthorized
agent. Polar Service will test your wrist receiver for water resistance after
battery replacement and make a full periodic check of the complete Polar
heart rate monitor.
I 80
Download from Www.Somanuals.com. All Manuals Search And Download.
J. TECHNICAL
SPECIFICATIONS
Polar heart rate monitor is designed to indicate the level of
physiological strain and intensity in sports and exercise. No
other use is intended or implied. Heart rate is displayed as
number of heartbeats per minute (bpm).
Transmitter
Battery type:
Battery life:
Operating temperature:
Material:
Built-in Lithium Cell
Average 2500 hours of use
14 °F to 122 °F/ -10 °C to +50 °C
Polyurethane
Waterproof
Elastic Strap
Buckle material:
Fabric material:
Polyurethane
Nylon, polyester and natural rubber
including a small amount of latex
J 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Wrist Receiver
Battery type:
CR 2430
Battery life:
Average 2 years (2h/ day, 7 days/ week)
14 °F to 122 °F/ -10 °C to +50 °C
to 160 feet/ 50 meters
Polyurethane
Operating temperature:
Water resistance:
Wrist strap material:
Backcover and wrist strap buckle material: Stainless steel complying with
EU Directive 94/27/EU and its amendment 1999/C 205/05 on the release of
nickel from products intended to come into direct and prolonged contact
with the skin.
Watch accuracy better than 0,5 seconds/ day at 77 °F/ 25 °C temperature.
Accuracy of heart rate measurement: 1% or 1 bpm, whichever larger,
definition applies to steady state conditions.
Default Settings
In USA and Canada
Time of Day
Activity
HRmax
Low
220-age
12 h
In other countries
Time of Day
Alarm
Date of Birth
(adjustable range
for year is 1921 - 2020)
Sex Male
VO2max
male
female
Activity sound
In USA and Canada
Units
In other countries
Units
24 h
OFF
0
45
35
On
2
Weight
Height
0
0
1
On
OFF
Help
OwnCal
J 82
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitness test
On
HRmax-p
OFF
Interval function
Interval heart rate
Number of intervals
Timer 1, 2, 3
OFF/ interval timer
160
3
OFF/ 2 min
80/ 160
Limits 1, 2, 3
Recovery function
Recovery heart rate
Recovery timer
OFF/ recovery timer
80
1 min
Limit Values
Exercise time
Heart rate limits
99 h 59 min 59 s
30 - 240
Heart rate zone time
Recovery time
Calories
Cumulative calories
Cumulative exercise time
Laps recorded to memory
Interval phases recorded to memory
99 h 59 min 59 s
99 min 59 s
99 999 kcal
999 999 kcal
9999 h
99
30
J 83
Download from Www.Somanuals.com. All Manuals Search And Download.
K. LIMITED POLAR
INTERNATIONAL GUARANTEE
•
•
This limited Polar international guarantee is issued by Polar Electro Inc. for the consumers who
have purchased this product in the USA or Canada. This limited Polar international guarantee is
issued by Polar Electro Oy for the consumers who have purchased this product in other countries.
Polar Electro Inc. / Polar Electro Oy guarantees to the original consumer/ purchaser of this
product that the product will be free from defects in material or workmanship for two years
from the date of purchase.
•
•
•
Please keep the receipt or International Guarantee Card, which is your proof of
purchase!
Guarantee does not cover battery, damage due to misuse, abuse, accidents or non-compliance
with the precautions; improper maintenance, commercial use, cracked or broken cases.
Guarantee does not cover any damage/s, losses, costs or expenses, direct, indirect or incidential,
consequential or special, arising out of, or related to the product. During the guarantee period
the product will be either repaired or replaced at an authorized service center free of charge.
This guarantee does not affect the consumer’s statutory rights under applicable national or state
laws in force, or the consumer’s rights against the dealer arising from their sales/ purchase
contract.
•
This CE marking shows compliance of
this product with Directive 93/42/EEC.
Copyright © 2000, 2001, 2002 Polar Electro Oy, FIN-90440 KEMPELE, Finland. All rights reserved. No part of this
manual may be used or reproduced in any form or by any means without prior written permission of Polar Electro
Oy. The names and logos marked with a ™ symbol in this user's manual or in the package of this product are
trademarks of Polar Electro Oy, except that Sound Blaster is a trademark of Creative Technology, Ltd. The names
and logos marked with a ® symbol in this user's manual or in the package of this product are registered
trademarks of Polar Electro Oy.
K 84
Download from Www.Somanuals.com. All Manuals Search And Download.
L. DISCLAIMER
•
•
The material in this manual is for informational purposes only. The
products it describes are subject to change without prior notice, due to
the manufacturer’s continuous development program.
Polar Electro Inc. / Polar Electro Oy makes no representations or
warranties with respect to this manual or with respect to the products
described herein. Polar Electro Inc. / Polar Electro Oy shall not be liable
for any damages, losses, costs or expenses, direct, indirect or incidental,
consequential or special, arising out of, or related to the use of this
material or the products described herein.
This product is protected by one or several of the following patents:
FI 88223, DE 4215549, FR 92.06120, GB 2257523, HK 113/1996, SG 9591671-4,
US 5491474, FI 88972, DE 9219139.8, FR 92.09150, GB 2258587, HK 306/1996,
SG 9592117-7, US 5486818, FI 96380, US 5611346, EP 665947, DE 69414362,
FI 68734, DE 3439238, GB 2149514, HK 812/1989, US 4625733, FI 100924,
FI 100452, US 5840039, FI 4150, DE 20008882.3, FR 0006504, FI 4069,
US 6272365, FR 9907823, GB 2339833, DE 29910633, FI 104463, US 6183422,
FI 4157, DE 20008883.1, FR 0006778, WO 97/33512, GB 2326240.
Other patents pending.
L 85
Download from Www.Somanuals.com. All Manuals Search And Download.
M. POLAR GLOSSARY
Activity level: A personal
assessment of your long term
physical activity level that is used in
the Polar Fitness Test.
Coding significantly reduces
crosstalk caused by other users of
heart rate monitors. However, it
does not necessarily reduce all
environmental interference.
BasicSet mode: Exercise set, which
interval is set off.
Configuring the display: During
the exercise you can modify display
options by selecting information to
the lower and upper rows.
Coded heart rate transmission:
Polar coded transmitter
automatically locks in a code to
transmit your heart rate to the wrist
receiver. In a coded transmission the
receiver accepts heart rate data only
from the Polar coded transmitter.
Electrodes: The grooved areas of
the transmitter that rest against the
skin and pick up the EKG signal.
M 86
Download from Www.Somanuals.com. All Manuals Search And Download.
Exercise mode: The stopwatch is on Maximum heart rate: (HRmax
)
and your exercise is recorded. You
can select between the BasicUse,
Interval Training Set and BasicSet.
Is the highest number of heart
beats per minute of a person.
Measure mode: Measuring your
heart rate without recording the
exercise.
Interval training: Seeks to
improve your race pace with
different periods of work and rest.
Summary file: Presents the main
Maximal oxygen uptake:
information of your exercise.
(maximal aerobic power, VO2max
)
Is the maximal rate at which oxygen
can be used by the body during
maximal work. VO2max is a good
index of aerobic fitness.
Target heart rate zone: The area
between the upper and lower target
heart rate limits. Target zone selection
is based on personal fitness goals.
M 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Symbols
Indicates an ongoing heart rate measurement and flashes to the beat
of your heart. A heart without frames indicates a non-coded heart rate
transmission.
Frame around the heart indicates a coded transmission of heart rate.
Indicates there has not been heart rate reception for at least 5 seconds.
- - Indicates there is no heart rate reception. Bring the wrist receiver up to
your chest near the transmitter’s Polar logo.
The receiver starts looking for the heart rate signal again.
In the Time of Day display the alarm is on.
Measure mode: beeps if you are exercising outside your target heart rate
zone. Fitness Test mode: sounds an alarm at the end of the fitness test.
Indicates the Interval Trainer.
Indicates continuous interval (Cont).
Exercise mode: indicates the heart rate above the target zone.
Exercise mode: indicates the heart rate below the target zone.
The graphic bar consists of five blocks. A flashing block indicates in
which level you are in the Options settings or File recalling loops.
Continuously running bars indicate that the exercise is recorded.
Indicates low battery.
M 88
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Texts
ALARM: Indicates the alarm in
watch settings.
AM or PM: Are used in 12h time
mode. Ex. in 24h time mode 13:00
means 1:00 PM.
AVG: Together with a reading
indicates average heart rate.
BasicUse: Exercising without
settings.
FIT. TEST: Indicates fitness test mode.
FULL: After having stored 99 laps
(the use of intervals reduces the
amount). FULL appears in the
display. You can continue taking lap
times or intervals but they won’t be
recorded into the file.
HRmax-p: Predicted maximum heart
rate value.
BestLap: Indicates the shortest lap
time information.
Interval, Int: Options mode:
indicates Interval Training Set.
Exercise mode: Indicates interval
exercise session including warm-up,
interval and cool-down phases.
InZone/ Above/ Below: Indicate
the time spent within, above and
below the target zone.
Cont: Up to 30 intervals succeed
one another unless the Interval
phase is manually stopped.
CoolDown: Cool-down phase at
the end of an interval training
exercise.
E0: BasicUse settings
KCal: Indicates the energy
E1-E5: Indicates which exercise set
you have used for the exercise.
ExeSet: Start setting your BasicSet
(Int OFF) or Interval Training Set (Int
On).
expenditure of your exercise.
LAPS: Indicates how many lap times
have been stored.
Lim High: The higher heart rate
limit of the target zone.
Exe. Time: Exercise duration
FILE: Indicates the file mode.
Lim Low: The lower heart rate limit
of the target zone.
M 89
Download from Www.Somanuals.com. All Manuals Search And Download.
OwnCal is individually calibrated by
your preset weight, maximal oxygen
uptake (VO2max) and maximum heart
rate (HRmax). The most accurate
OwnCal is received by entering your
clinically measured (in maximal
treadmill or bicycle stress test)
VO2max and HRmax into the wrist
receiver. Energy expenditure
measurement is most accurate in
continuous activities such as cycling
and running.
Limits1, 2, 3: Heart rate limits for
target zones 1, 2 and 3.
MAX: Together with a heart rate
reading indicates the highest heart
rate.
MAX %: Together with a heart rate
reading indicates what percentage
your current heart rate is of your
maximum heart rate.
OPTIONS: Indicates the Options
mode.
OwnCal: Calculates energy
expenditure during exercise in
kilocalories. 1 kilocalorie (kcal) =
1000 calories (cal). You can follow
how much energy you lose by
exercising in one exercise session or
in a day, week or even a year. The
OwnCal can be used as a dose
measure of exercise Ex. in nutrition
planning. OwnCal calorie
calculation starts when your heart
rate reaches 90 bpm or is above
60% of your maximum heart rate,
whichever is smaller. These limits
are set to count only exercise
calories. The higher the heart rate,
the faster the energy expenditure.
OwnINDEX: Result of Polar Fitness
Test and comparable score with
maximal oxygen uptake (VO2max in
ml/kg/min).
RecoHr, heart-rate-based
recovery: You set the heart rate,
which will end your recovery
calculation. In the File mode you
will see the drop in your heart rate
and the recovery duration.
RecoTime, time-based recovery:
You set the recovery time in the
Options mode. In the File mode you
will see the drop in your heart rate
and the recovery duration.
M 90
Download from Www.Somanuals.com. All Manuals Search And Download.
Split Time: The elapsed time from
the beginning of the exercise until
storing the split time.
Sw: Indicates stopwatch.
Timer1, 2, 3: Interval Training
mode: Countdown timers for the
Interval Training set.
WarmUp: Warm-up phase in the
beginning of an Interval Training
exercise.
M 91
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
12/ 24h time mode ................................. 32
Activity/button sound on/off ................ 30
Alarm settings ........................................ 32
BasicSet exercise .............................. 22, 47
Buttons ...................................................... 6
Care and maintenance .......................... 71
Code search ............................................ 35
Connection to Computer ...................... 59
Date settings .......................................... 33
Display configuration ............................ 40
Downloading Training Data to a
Computer ................................................ 60
Easy start ................................................... 8
Exercise set ............................................. 21
File ........................................................... 50
Fitness test .............................................. 63
Fitness test on/off .................................. 29
Frequently asked questions .................. 77
Functions during the exercise ............... 37
Heart rate limits settings ....................... 24
Heart rate limits checking .............. 49, 53
Heart rate limits on/off ......................... 24
Heart rate zone alarm on/off ............... 37
Help on/off ............................................. 31
How to enter settings ............................ 16
HRmax-p on/off ......................................... 29
Illuminate the display ..................... 38, 49
Interval Training Set .............................. 22
Interrupt an interval
Limited Polar international
guarantee ............................................... 84
Measuring units settings ....................... 30
Modes and their functions .................... 11
Naming exercise sets.............................. 27
OwnCal on/off ........................................ 28
OwnCal calorie expenditure .... 41, 54, 90
OwnIndex ............................................... 63
Pause an exercise ................................... 39
Predicted maximum heart rate............. 65
Precautions ............................................. 73
Recall training information .................. 50
Recovery during BasicSet ............... 48, 53
Recovery during Interval training .. 45, 56
Recovery settings ................................... 26
Reset cumulative counts to zero .......... 58
Reset the stopwatch .............................. 41
Return to the Time of Day display ......... 7
Selecting exercise type .......................... 21
Setting tips ............................................. 34
Start an exercise set ............................... 42
Start measuring your heart rate...... 9, 37
Stop measuring your heart rate ........... 10
Swap the exercise type .......................... 49
Swap the heart rate limits .................... 38
Swap the time zones 1/ 2 ...................... 34
Technical specifications ......................... 81
Time of day settings .............................. 32
Timer settings ......................................... 24
Transferring Settings from Computer .. 61
Transmitter ...........................................5, 9
Update HRmax-p and OwnIndex
exercise phase .................................... 49
Interrupt an interval or
recovery calculation .......................... 49
Lap and split time storing .............. 39, 57
to user information ........................... 68
User information settings ..................... 18
M 92
Download from Www.Somanuals.com. All Manuals Search And Download.
|