Planet Technology Telephone VIP 150T User Manual

SIP IP Phone  
-- with PSTN Connectivity  
Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.12 [sysconf] command ............................................................................................ 35  
4.13 [sip] command.................................................................................................... 36  
4.14 [security] command ............................................................................................ 37  
4.15 [voice] command ................................................................................................ 37  
4.16 [tos] command.................................................................................................... 39  
4.17 [ddns] command................................................................................................. 40  
4.18 [bureau] command ............................................................................................. 41  
4.19 [rom] command .................................................................................................. 41  
4.20 [passwd] command ............................................................................................ 42  
Chapter 5 Upgrading Software on the VIP-150T............................................................................44  
5.1 From LCD Phone Menu ....................................................................................... 44  
5.2 Web Management................................................................................................ 45  
5.3 Remote Control: Telnet......................................................................................... 45  
2
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Overview of the VIP-150T  
VIP-150T is a full-featured IP-based telephone set via Ethernet base communication. Over  
the office LAN connection, it provides IP-PBX solution such as station-to-station call, IP call  
and local PSTN/PBX Extension call via PSTN Gateway.  
VIP-150T provides two 10/100BaseT switch/hub RJ-45 ports allow connecting to office LAN  
and PC simultaneously. It is compatible with ADSL or Cable Modem provided by ITSP, ISP  
or Carrier Company to provide VoIP services to residential and SOHO application.  
VIP-150T is also an integrated Analog Phone provides IP call or PSTN call selection. When  
external power is down, it can be a Plain Old Telephone set (POTs).  
It provides internal high-quality speakerphone, programmable keys and feature buttons.  
VIP-150T also embedded with a dot matrix of two lines 24 characters LCD, which can  
display date and time, calling party name, calling party number, and digits dialed and etc.  
?
(**): May be not available right now, please contact with your distributor.  
Note:  
1.1 Hardware Overview  
1.1.1 Front View and Keypad function  
LCD  
Speed  
Function  
Keypad  
Speaker  
1
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
¨
¨
LCD: 2 lines, 24 character Dot Matrix display.  
C: Jump out current LCD menu.  
¨ ç: Move to previous selection or clear previous data.  
¨ è: Move to right or next selection.  
¨
¨
OK: Press OK to confirm the modification.  
Direct Line (DL) Button 1 10: User press DL button after off-hook to do speed dial  
according to phone book data from 1-10 (please refer to LCD configuration-3.Phone  
Book; Advanced Configurations via Telnet- 5.[pbook] command, or Web  
Configuration-Phone Book chapter.  
¨
Number 1 10, * and #: The function is as the same as the general phone set.  
Corresponding list of keypad and symbol:  
1
2
3
4
5
6
7
8
9
*
1”  
A; B; C; 2”  
D; E; F; 3”  
G; H; I; 4”  
J; K; L; 5”  
M; N; O; 6”  
P; Q; R; S; 7”  
T; U; V; 8”  
W; X; Y; Z; 9”  
.; @; _; -; ,; !; ?; *”  
0; Space”  
0
#
#”  
¨
¨
MUTE: Mute the voice of MIC and let others cant hear from user in communication.  
PSTN: Press PSTN to switch VIP-150T as PSTN or IP Phone Mode. In PSTN mode,  
PSTNcharacters will be displayed on LCD left bottom side, then users can dial out as  
if standard telephone set in PSTN; in IP Phone mode, PROXY characters will be  
displayed on LCD left bottom side. (**)  
1. When VIP-150T is in PSTN mode, only PSTN and SPEAKER function  
key can work.  
2. On LCD will display ”…Incoming Call... to inform user when VIP-150T  
has both IP and PSTN side incoming calls.  
?
3. If in communication with IP side, user can press HOLD to hold IP side,  
Note:  
then press PSTN to pick up PSTN side, after that can press HOLD again  
to retrieve IP side.  
4. If in communication with PSTN side, user must hang up PSTN side before  
pick up IP side.  
2
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
¨
¨
HOLD: To hold a call, after press HOLD button, both sides will hear hold tone.  
SPEED: Press SPEED and number (Phone book index) after off-hook can do speed  
dial according to phone book data (please refer to 3.LCD configuration-6. Phone Book  
or Advanced Configurations via 4.Telnet- 5.[pbook] command).  
¨
¨
FORWARD: Forward an incoming call to another IP device. (Please refer to LCD  
configuration-Forward Type) (**)  
MESSAGE and its indicated LED light: When having missed incoming calls, the  
MESSAGE LED will be flashing. User can check the information of missed calls by  
pressing the MESSAGE button. (**)  
¨
TRANSFER:  
1. Transfer a call to the third site. When A and B are in communication, A wants to  
transfer this call to C, A can press TRANSFER button, now B will hear hold tone,  
and A will hear dial tone, then A can press phone number of C, after C picks up, A  
can talk with C, after A hangs up, B and C can be connected.  
1. A cannot press phone number of C before hearing dial tone.  
?
2. A cannot hangs up before C picks up.  
Note:  
2. Change characters to be capital or lowercase: when pressing TRANSFER before  
press letters can switch input type of letters.  
¨
¨
¨
REDIAL: Redial the last outgoing call.  
+ And -: Adjust the voice volume heard of communication.  
SPEAKER: Hand free mode. User can talk without picking up handset.  
All function keys mentioned above (except dialing keypad) are effective only  
?
in IP Phone mode. (**)  
Note:  
3
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.1.2 Back View  
¨
¨
DC 9V: DC 9V power input outlet  
LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5  
cable.  
¨
¨
PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable  
Line: RJ-11 connector, connected directly to the PSTN analog line.  
There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and  
PC port. When network status is regular, LED of LINK/ACT will light on; when  
?
VIP-150T is transmitting or receiving data, LED will be flashing; when transmit  
rate is in 10 mbps or 100mbps, LED of 10/100 will light off or light on.  
Note:  
1.1.3 Specification of connector  
1Ethernet Port:  
Ethernet port is for connecting VIP-150T to network, transmit rate supports 10/100  
Base-T.  
Ethernet connectorLAN)  
2RJ11connector:  
RJ11 connector is for connecting VIP-150T with PSTN.  
RJ11connector  
4
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2 Software Features and Specification  
Application:  
l
l
l
l
ISP/ITSP (Internet Telephony Service Provider)  
IP-PBX with office telephony services  
Multi-nation enterprise communication  
SOHO Telephony  
Calling Features  
l
l
l
l
l
Call Hold  
Call Transfer  
Call Forward (**)  
10 sets last number Redial  
Ten configurable speed dials  
Network Supported  
l
l
l
l
l
Fixed IP  
Dynamic Host Configuration Protocol (DHCP)  
PPPoE connection (When PPPoE disconnect, VIP-150T can automatically re-connect)  
Behind NAT IP Sharing Device  
Support QOS by setting DSCP (Differentiated Service Code Point) parameters of VoIP  
packet  
l
Support 802.1p1q (VLAN) (**)  
Audio Features  
l
l
l
l
l
l
G.711 a/μ-Law, G.723.1, G.729, G.729a  
VAD, CNG  
G.165/G.168 compliant echo cancellation  
Programmable Dynamic Jitter Buffer  
Bad Frame Interpolation  
Gain/Attenuation Settings  
5
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Provisioning and Configuration  
l
l
l
l
l
l
SIP (RFC3261) compliance  
LCD configuration password protection  
Provide Proxy Mode or Peer-to-Peer Mode (Non Proxy Server needed) selection  
Ring tone, Speaker and Handset volume adjustable  
Dial path selection (PSTN or IP mode)  
Support DNS server inquiry  
Management Features:  
l
l
Software Upgrade: TFTP/FTP download  
Three easy ways for system configuration  
-
-
-
LCD Front Panel  
Web Browser  
TELNET  
Environmental  
l
l
Humidity: 10 to 90 % (Non-condensing)  
Operational Temperature: 0 to +40 °C  
6
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Configuring the VIP-150T through  
LCD Phone menus  
1. After any configuration is made for the VIP-150T, user has to do Reboot in  
the selection 7 Reboot.  
?
2. We suggest user to set IP address via LCD menu 52.3.4.5 first, then  
Note:  
go to chapter 3 to do other detail configurations via web browser.  
2.1 Initialize VIP-150T  
1. When power on the VIP-150T, the LCD screen shows as below. Now VIP-150T is  
running Boot sector program.  
VIP-150T  
Board Start Booting  
2. When VIP-150T finishes boot program initialization. User can see flashing greeting  
as below:  
System Initializing…………..  
3. Then VIP-150T get into standby mode:  
VIP-150T  
Proxy  
10:10:10 AM  
The main LCD screen would be shown as similar as above. Proxymeans the  
VIP-150T is in Proxy Mode, and when VIP-150T is connected to SNTP server, on  
LCD will show current time captured from SNTP server.  
4. When VIP-150T is under peer-to-peer mode, on LCD will show P2Pinstead of  
Proxy.  
VIP-150T  
P2P  
10:10:10 AM  
5. After pressing the PSTN button, the Proxyor P2Pwill be replaced by PSTN.  
Please notice that user must plug PSTN line in RJ-11 port when VIP-150T is in PSTN  
7
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
mode. (**)  
VIP-150T  
10:10:10 AM  
PSTN  
6. Press çor èto enter configuration mode then press OK button to enter sub menus;  
press C can jump out current menu to previous level.  
1. Call List (**)  
2. Forward Type  
3. Phone Book  
4. Ringer Settings  
5. Network  
6. Advanced Settings (protected by password)  
7. Reboot  
2.2 LCD Menu Configuration  
User can set the following configurations by LCD keypad.  
1. Press TRANSFER before input data can switch characters to be capital  
or lowercase.  
2. Press SPEED before input data can switch input mode as character  
?
mode or IP mode; for example, user wants to enter IP address, after  
Note:  
pressing SPEED can enter digits directly.  
3. When user is inputting data, press C will jump out to menu list, press ç  
will clear previous input data.  
1. Call List (**)  
If there is an unanswered IP call, it will be kept in message box. MESSAGE LED will  
be flashing until user press MESSAGE to check miss call and re-press MESSAGE  
to return to main screen.  
(1) Missed Callsto see all missed calls in message box.  
(2) Received Callsto see all received calls in message box.  
(3) Dialed calls: to see all dialed calls in message box.  
8
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Forward Type (**)  
There are 3 selections in Forward type, user must select under which condition to  
forward calls.  
(1) Busy  
When VIP-150T is in busy status, the incoming call will be forwarded  
to the assigned phone number.  
A. Activate  
Enter a forwarded phone number to activate busy forward function.  
B. Deactivate  
Deactivate Busy Forward function.  
(2) No Response  
When VIP-150T hasnt been picked up for around 10 seconds, the  
incoming call will be forwarded to the assigned phone number.  
A. Activate  
Enter a forwarded phone number to activate no response forward  
function.  
B. Deactivate  
Deactivate No Response Forward function.  
(3) Unconditional  
It is included the above two types. Whether the VIP-150T is in which  
status, calls will be automatically forwarded to the assigned phone  
number.  
A. Activate  
Enter a forwarded phone number to activate Unconditional Forward  
function.  
B. Deactivate  
Deactivate Unconditional Forward function.  
3. Phone Book  
1. List  
List all records of name, telephone number, and IP address in the phone  
address book.  
2. Edit/Delete  
Edit or delete a record of name, telephone number, and IP address of the  
phone address book.  
3. New  
9
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Add a new record of name, telephone number, and IP address of the phone  
address book.  
4. Ringer Settings  
1. Volume  
User can adjust ring volume by press çor èon the keypad to decrease or  
increase ringer volume.  
2. Style  
There are three tone styles for VIP-150T. Move the >symbol by press ç or  
è on the keypad to select the tone style preferred, then press OK to confirm  
it.  
5. Network  
1. Information  
User can press çor èto check current network status:  
(1) Mode: Display current network connection mode of VIP-150T to be  
Static (Fixed IP), DHCP, or PPPoE.  
(2) IP, Mask, Gateway: display current IP information.  
2. Network Mode  
Set network mode of VIP-150T to be Static (Fixed IP), DHCP, or PPPoE.  
3. IP address  
Set IP address of VIP-150T.  
4. Subnet Mask:  
Set subnet mask address of VIP-150T.  
5. Default Gateway  
Set default gateway address of VIP-150T.  
6. Domain Name Server  
Set IP address of Domain Name Server. Once VIP-150T can connect to DNS  
server, user can set URL address for Proxy server or Phone book instead of  
IP address.  
7. PPPoE Configuration  
(1) User Name  
Set PPPoE connection authentication user name.  
(2) Password  
Set PPPoE connection authentication password.  
10  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(3) Auto Re-connect  
Choose ON or OFF to enable or disable this function. If user enables this  
function, after PPPoE disconnected, VIP-150T will automatically reboot to  
re-connect, and after reboot, if VIP-150T still cant connect with server,  
VIP-150T will keep trying to connect. On the other hand, if user disables  
this function, VIP-150T wont reboot and keep trying to connect.  
8. SNTP Configuration  
(1) SNTP Mode:  
User can set SNTP function to be on or off, which means VIP-150T will  
capture current time from SNTP server or not.  
(2) SNTP Server:  
User can specify a SNTP server for VIP-150T to capture current time.  
(3) Time Zone:  
User can set time zone via pressing çor èaccording to the location  
VIP-150T is. For example, in Taiwan the time zone should be set as  
GMT+8:00.  
9. Behind IP-Sharing  
(1) If VIP-150T is behind IP sharing or NAT device, on IP sharing must  
enable DMZfunction or set Virtual Serverto open ports (UDP port:  
5060 and 16384).  
(2) User must enter public IP address of IP sharing.  
6. Advanced Settings (protected by password)  
l
Please Enter Password: (**)  
User must key in password to enter this menu, selections under this  
command are all important ones, which can only be configured by advanced  
users.  
1. Default Password to enter is empty, please press OK to enter sub-menus.  
2. If user forget password, please contact with your distributor, we will  
generate a specific password according to your MAC address of  
VIP-150T.  
?
Note:  
3. User can also try to configure VIP-150T via Telnet or Web browser with  
default IP address: 192.168.0.1  
1. SIP Settings  
(1) Connect Mode  
11  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select SIP connection mode to be peer-to-peer mode or Proxy mode.  
(2) Proxy  
A. Proxy  
Set Proxy IP address or Domain Name.  
B. Outbound proxy  
Set Outbound Proxy IP address or Domain Name.  
C. Proxy port  
Set Proxy port for VIP-150T to send messages.  
D. Expire (in seconds)  
Set expire time of registration, in the duration of 2/3 expire time,  
VIP-150T will re-register to Proxy Server again.  
(3) User Info  
A. User Name  
Set User Name of VIP-150T to register to Proxy Server. If Proxy  
server doesnt request specific User name, please enter Line  
number here.  
B. Line Number  
Set Line Number of VIP-150T to register to Proxy Server.  
C. Password  
Set User Password of VIP-150T to register to Proxy Server. This  
configuration is not necessary, if Proxy server doesnt request  
client to set password, user only has to set User Name the same  
as Line Number.  
2. Firmware Update  
(1) Download method  
There are two methods to download new version file, please move the  
>symbol by press ç or è on the keypad to select TFTP or FTP  
method, then press OK to confirm it.  
(2) FTP/TFTP Sever  
User has to offer one TFTP/FTP server IP Address and set this IP  
Address via keypad. The IP Address is necessary for upgrading  
VIP-150T new application rom file.  
(3) Set FTP user account (**)  
User has to input user name and password for FTP server login .It is  
necessary for upgrading VIP-150T new application rom file via FTP  
method.  
(4) File Name  
User has to press the file name of new application rom file prepared for  
upgrading  
12  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(5) Start to Upgrade  
Select YES or NO to start upgrade. After download is finished, press OK  
then VIP-150T will ask if need to reboot. (**)  
(6) Firmware Version  
Show versions of all software and hardware. (**)  
?
Download via LCD command can only upgrade new application rom file.  
Note:  
2. LCD Menu Password  
Set entry password of phone LCD menu.  
7. Reboot  
Reboot machine. It is necessary and important for user to reboot VIP-150T  
after any configurations has been made. VIP-150T will ask user again before  
reboot.  
13  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Configuring the VIP-150T through  
Web Pages  
The HTTPD web management interface provides user an easier way to configure rather  
than command line method through TELNET.  
The configuration function and steps are similar with the way through command line. Please  
refer to the chapter 4- Configuring the VIP-150T through Telnet command lines for more  
detail information. Below is a guide for user to configure via web interface.  
Step 1. Browse the IP Address predefined via Keypad  
Please enter IP address (user have to set via LCD menu first) of VIP-150T in web browser.  
If user failed to set IP address via LCD menu, the default IP address of VIP-150T is  
192.168.0.1, user can try to connect to VIP-150T via this default IP via web interface.  
Step 2. Input the login name and password  
n Login name: root / administrator  
n Password (The same with TELNET): Null (just press confirm, no need to key in  
password in default value)  
?
User can set password later in 9.PASSWORD via web interface.  
Note:  
14  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3. Enter the web interface main screen  
After enter login name and password, user can see web interface main screen as below.  
Step 4. Start to configure  
Most important items are Network Interface, SIP Configurations, and Phone Book (in  
Peer-to-Peer mode). Please remember to configure these commands before start to work  
with VIP-150T.  
After change any settings, please remember to reboot VIP-150T so that  
?
changes can take effect.  
Note:  
15  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Network Interface  
Please refer to chapter 4.9 [ifaddr] command.  
-
-
-
-
IP Address: Set IP Address of VIP-150T  
Subnet Mask: Set the Subnet Mask of VIP-150T  
Default routing gateway: Set Default routing gateway of VIP-150T  
Get IP Mode: User has to set VIP-150T to use which network mode.  
1. Fixed IP: User has to assign a fixed IP to VIP-150T.  
2. DHCP: When DHCP function enables, VIP-150T will automatically search  
DHCP server after reboot.  
3. PPPoE: If VIP-150T is working with PPPoE connection, user have to set  
related parameters in PPPoE Configuration page.  
If User set Get IP modeas DHCP or PPPoE, IP address, Subnet Mask, and  
?
Default routing gateway will become 0.0.0.0 and not allow to be configured.  
Note:  
16  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
-
SNTP: Enable / Disable the Simple Network Time Protocol function  
17  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
-
-
SNTP Server Address: Set SNTP Server Address  
When SNTP server is available, enable VIP-150T SNTP function to point to SNTP  
server IP address so that VIP-150T can get correct current time.  
GMT: Set time zone for SNTP Server time  
User can set different time zone according to the location of VIP-150T. For example,  
in Taiwan the time zone should be set as 8,which means GMT+8.  
IP Sharing: Enable it if VIP-150T is behind IP Sharing router.  
UPnP: Enable it if IP sharing or NAT device supports UPnP function so that no need  
to configure IP sharing or VIP-150T when VIP-150T is behind NAT device.  
IP Sharing Server Address: Set Public IP Address of IP Sharing router for VIP-150T  
to work behind IP sharing.  
-
-
-
-
Primary DNS Server: Set Primary Domain Name Server IP address.  
User can set Domain Name Server IP address. Once VIP-150T can connect with  
DNS server, user can specify URL address instead of IP address for Proxy and  
phone book IP address.  
-
Secondary DNS Server: Set Secondary Domain Name Server IP address.  
18  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. SIP Configurations  
Please refer to chapter 4.13 [sip] command  
-
-
-
-
-
Operation Mode: Select VIP-150T to work under Peer-to-Peer mode or Proxy  
mode.  
Proxy Server: Set Proxy Server or URL address (Domain Name Server must be  
configured. Please refer to Network Interface).  
Outbound Proxy: Set IP Address or URL address (Domain Name Server must be  
configured. Please refer to Network Configure) of outbound Proxy server.  
Proxy port: Set Proxy port for VIP-150T to send message, default value is 5060, if  
there is no special request of Proxy server, please dont change this value.  
Phone Book Search: enable/disable phone book search function. If user enabled  
this function, VIP-150T will search dialed number in phone book to see if there is  
any matched table before send to Proxy server, and if there is a matched data in  
phone book, VIP-150T will make call to related IP address.  
1. Prefix String: set prefix string. If user ID contains alphabets, user can set it as prefix  
string here. For example, if Account Name is 123, VIP-150T will sent out messages  
as Account Name @IP address of Proxy, if user set prefix as abc, VIP-150T will  
set out as abc123@IP address of Proxy. This function is for special proxy server.  
19  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
-
-
Line Number: identify one number for the VIP-150T to register to the Proxy.  
Line Account: set user name of VIP-150T for registering. User can set user name  
and password for registering. If password is no need, please set user name the  
same as line number or VIP-150T wont register successfully.  
Line Password: set password for registering.  
-
-
-
-
SIP Port: set SIP UDP port.  
RTP Port: set RTP port for sending voice data.  
Expire Time: set expire time of registration. VIP-150T will keep re-registering to  
proxy server before expire timed out  
20  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. System Configuration  
Please refer to chapter 4.12 [sysconf] command  
-
-
Keypad DTMF Type: set DTMF type. User can select DTMF type VIP-150T  
transmits.  
RFC2833 Payload Type: change RFC2833 Payload type. This is for special request  
from the other site, if RFC2833 payload type of 2 sites are different, it may cause  
some problem of connection.  
-
-
Interval between Dialstring Digits: Set the DTMF inter digit time (second)  
To set the duration (in second) of two pressed digits in dial mode as timed out. If  
after the duration user hasnt pressed next number, VIP-150T will dial out all  
number pressed.  
Terminal Digit: select end of dialing key, e.g. set end of dial key as # button, after  
finished pressing dialing number then press # will dial out.  
21  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. PPPoE Configuration  
Please refer to chapter 4.10[pppoe] command  
-
-
-
User Name: Set PPPoE authentication User Name.  
Password: Set PPPoE authentication password.  
Reboot After Remote Host Disconnection: Enable/Disable auto reboot after PPPoE  
disconnection  
If user enables this function, after PPPoE being disconnected, VIP-150T will  
automatically reboot to re-connect, and after reboot, if VIP-150T still cant get  
contact with server, VIP-150T will keep trying to connect. After re-connected,  
VIP-150T will also restart system. On the other hand, if user disables this function,  
VIP-150T wont reboot and keep trying to connect.  
-
Other items: for reference only, cannot allow to be configured.  
22  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Voice Setting  
Please refer to chapter 4.15 [voice] command  
-
Codec Priority: set codecs priority in order. Please notice that user can set from 1 to  
5 codecs as their need. For example, user can only set first priority as G.723.1, and  
set the others as x, that means only G.723.1 is available.  
-
-
Sending Packing Size: User can set different packet size for each codec.  
G.723 Silence Suppression: Enable / Disable sound compression and comfort noise  
generation. It is only for codec G.723.1  
-
Volume: Adjust the volume in Voice(sending out); Input(receiving); DTMF”  
(DTMF sending out).  
-
-
-
Echo Cancelor: Enable / Disable (suggested always Enable this function).  
Jitter Buffer: Set Min. Delay and Max. Delay of Jitter Buffer for voice packets.  
Optimized Factor (Jitter): Set Optimized Factor of voice, this is for advanced user  
only, please contact with your distributor before making any change.  
23  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Phone Book  
Please refer to chapter 4.5 [pbook] command  
-
-
Add Entry: User can specify 20 sets of phone book via web interface. Please input  
index, Name, IP Address and E.164 number of the destination device.  
Delete Entry: User can delete any configured phone book data by index.  
24  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. DDNS Configuration  
Please refer to chapter 4.17 [ddns] command  
-
-
-
-
-
-
-
-
-
Status: Enabled/Disable the dynamic DNS service  
Server: Specify DDNS server address  
Host Name: Registered domain name  
ID: Registered account ID  
Password: Registered account Password  
Check IP: On/Off check the host current IP address  
IP Check Server1: Specify IP address check server  
IP Check Server2: Specify secondary IP address check server  
Check every: Setting the service delay time  
(1~59 minutes / 1~24 hours / Off)  
25  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Version Information  
Please refer to chapter 4.19 [rom] command  
-
-
-
Boot:  
Boot loader version VIP-150T  
Default: This field has no default value.  
Application: Application image version information of VIP-150T.  
Default: This field has no default value.  
DSP Version: DSP image version information.  
Default: This field has no default value.  
26  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Password  
Please refer to chapter 4.20 [passwd] command  
-
-
CHANGE: First select login name as root or administrator, then enter current  
password, new password and confirm new password again to set new password.  
ABORT: Press abort will clean all inputs.  
27  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Firmware Upgrade  
Please refer to chapter 4.19 [rom] command  
-
-
-
-
-
Server IP Address: Set TFTP server IP address  
Target File name: Set file name prepared to upgrade  
Download Method: Select download method as TFTP or FTP  
FTP Login: Set FTP login name and password  
Target File Type: Select which sector of VIP-150T to upgrade  
1. After 2mb file download is finished, all configurations might change to  
default values, user has to configure again.  
?
2. After upgrade Application, please remember to execute Flash Clean,  
which will clean all configurations become factory values except IP  
address.  
Note:  
28  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Reboot  
Please refer to chapter 4.4 [reboot] command  
-
Press reboot will reset VIP-150T.  
To execute reboot via web browser, VIP-150T will automatically save all data  
?
before reboot. To execute reboot via TELNET command.  
Note:  
29  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4 Configuring the VIP-150T through  
Telnet command lines  
After setting the IP Address of VIP-150T and reboot, (please refer to LCD Menu: 5-3.4.5),  
user can enter into Telnet command lines.  
1. After user enter VIP-150T configuration via telnet, please use login: root,  
password: null, press enter to enter command lines.  
2. User must input lower-case command, but contents of configurations such  
?
as SIP alias or user name etc, user can set as capital case.  
Note:  
3. After any change of configuration, please remember to do commit  
command to save changes and then reboot command to reboot system.  
4.1 [help] command  
Type help or man or ? to display all the command lists. The following figure is shown  
all commands of VIP-150T.  
4.2 [quit] command  
Type quit/exit/close will logout VIP-150T and Telnet Program.  
30  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.3 [debug] command  
This command is for engineers to debug system of VIP-150T. User can add debug flag  
via command debug add debug flags, and then start debug function via command  
debug open. When VIP-150T is working on screen will display related debug  
messages. Most frequently used debug flag are sip, fsm, msg”…etc.  
4.4 [reboot] command  
After typing commit command, type reboot to restart the VIP-150T.  
Sometimes after user type reboot, on terminal screen will display: "Data modified,  
commit to flash rom?which means VIP-150T will record call history or not. (Ex.  
REDIAL, outgoing and incoming call data)  
4.5 [pbook] command  
This command is functional both in Proxy mode and Peer-to-Peer mode. In proxy mode,  
use speed dial or 10 DL button will dial out e.164 number in phone book. In the other  
hand, in peer-to-peer mode, VIP-150T will dial out IP address.  
1. -print: display phone book data. User can print all data in phone book by command  
(pbook print). Furthermore, user can also print only a section of data by indicate  
parameter start indexand end index(pbook print start index” “end index).  
If parameter end indexis omitted, only record start indexwill be displayed.  
(pbook print start prefix).  
2. -add: add a new record in phone book table by giving name, IP address, and e.164  
number of callee endpoint.  
(pbook add name Xip xxx.xxx.xxx.xxxe164 X)  
3. -search: search any record in the phone book according to IP address, name or  
e164 number  
4. -delete: delete a record of certain listed index in phone book table. (pbook delete  
31  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
index number)  
5. -insert: insert an record in specified index of phone book.  
6. -modify: modify record of a certain index in phone book . Please notice that the  
name, IP address and e164 number must be modified together; user cannot just  
modify one parameter only.  
(pbook modify indexname Xip xxx.xxx.xxx.xxxe164 X)  
4.6 [commit] command  
Save any changes after configuring the VIP-150T.  
4.7 [ping] command  
Command ping can test which the IP address is reachable or not.  
Usage: ping IP address”  
The message will display packets transmitting condition or no answer from the IP  
address.  
32  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.8 [time] command  
When VIP-150T enable SNTP function and be able to connect with SNTP server, type  
time command will show the current time retrieved from SNTP server.  
..........................................................................................................................................................  
4.9 [ifaddr] command  
Configure and display the VIP-150T IP information.  
1. print: print out all current configurations of ifaddr command.  
2. -ip, -mask, -gate: Set VIP-150T IP Address, subnet mask and default gateway  
respectively.  
1. -ipmode: Set VIP-150T network mode to be Fixed IP, DHCP or PPPoE.  
When User set IP mode to be fixed IP, please set IP, subnet Mask, default gateway  
as mentioned in item 2.  
If User set IP mode to be DHCP, VIP-150T will search for DHCP server to capture  
IP address after reboot.  
If user set IP mode to be PPPoE, please remember to set related parameters under  
[pppoe] command.  
2. -sntp: When SNTP server is available, enable VIP-150T SNTP function and assign  
SNTP server IP address so that VIP-150T can capture current time from SNTP  
server. (ifaddr sntp 1 xxx.xxx.xxx.xxx)  
3. -dns: User can set Domain Name Server IP address. Once VIP-150T can connect  
with DNS server, user can specify URL address instead of IP address for Proxy  
Server and phone book IP address...etc.  
4. timezone: User can set different time zone according to the location VIP-150T is.  
For example, in Taiwan the time zone should be set as 8,which means GMT+8.  
33  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(GMT-8: ifaddr timezone -8)  
5. -ipsharing: If VIP-150T is behind a IP-sharing , user must enable IP sharing  
function and specify public IP address.(ifaddr ipsharing 0/1 public IP address  
of IP sharing, 0 for disable and 1 for enable)  
Some Proxy servers support endpoint behind NAT function, in this case  
?
VIP-150T doesnt have to enable IP sharing function, please contact with your  
Note:  
Proxy Server vendor.  
6. upnp: enable/disable UPnP function. If the IP sharing or NAT device supports  
UPnP, user can enable UPnP function so that VIP-150T will automatically connect  
with NAT device without configuration in VIP-150T and NAT device.  
4.10 [pppoe] command  
1. -print: display all current configurations and information.  
2. id: to set PPPoE authentication user name.  
3. pwd: to set PPPoE authentication password.  
4. reboot: Choose enable or disable this function. If user enables this function, after  
PPPoE disconnected, VIP-150T will automatically reboot to re-connect, and after  
reboot, if VIP-150T still cant connect with server, VIP-150T will keep trying to  
connect. On the other hand, if user disables this function, VIP-150T wont reboot  
and keep trying to connect. (pppoe reboot 0/1)  
34  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.11 [flash] command  
This command will clean the configuration stored in the flash rom to default value and  
reboot the VIP-150T.  
1. After user upgrade new software version, suggested to execute this  
command to make sure new software work well on VIP-150T.  
?
2. To execute the command flash clean, all configuration of VIP-150T  
Note:  
stored in flash will be cleaned. It is authorized for the user whose login  
name is rootonly.  
4.12 [sysconf] command  
1. -print: display all current configurations.  
2. -idtime: set the duration(in second) of two pressed digits in dial mode as timed out.  
If after the duration user hasnt pressed next number, VIP-150T will dial out all  
number pressed.  
3. -keypad: set DTMF type .User can select DTMF type VIP-150T receive and  
transmit.(sysconf keypad 0/1 , 0 for in band ,1 for RFC2833.)  
4. -2833type: change RFC2833 Payload type.  
5. -eod: select end of dialing key, e.g. set end of dial key as button , after finished  
pressing dialing number then press will dial out. (sysconf eod 0/1/2 , 0 for no  
end of dial key , 1 for button, 2 for #button )  
35  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.13 [sip] command  
1. print: display all current configurations.  
2. mode: configure VIP-150T as Proxy or Peer-to-Peer Mode.  
Usage: sip mode 0/1(1 for Proxy mode, 0 for Peer-to-Peer mode)  
3. px: set proxy server IP address or URL address (sip px IP address or URL of  
Proxy server).  
4. pxport: set listening port of Proxy server.  
5. outpx: set IP address of outbound proxy server. After user set outbound proxy, all  
packets form VIP-150T will be sent to outbound proxy server.  
6. prefix: set prefix string. If user ID contains alphabets, user can set it as prefix  
string here. For example, if Account Name is 123, VIP-150T will sent out messages  
as Account Name @IP address of Proxy, if user set prefix as abc, VIP-150T will  
set out as abc123@IP address of Proxy. This function is for special proxy server.  
7. line: identify one number for the VIP-150T to register to the Proxy (SIP line  
line number).  
In proxy mode please remember to set user account information under  
?
security command.  
Note:  
8. pbsearch: enable/disable phone book search function under Proxy Mode. If user  
enabled this function, VIP-150T will search dialed number in phone book to see if  
there is any matched table before send to Proxy server, and if there is a matched  
data in phone book, VIP-150T will make call to related IP address.  
9. expire: set expire time of registration. VIP-150T will keep re-registering to proxy  
server before expire timed out.  
10.port: set listening UDP port or VIP-150T.  
11.rtp: set RTP port number. VIP-150T will use this port to send and receive voice.  
36  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.14 [security] command  
1. print: display all current configurations.  
2. -name: set user ID of VIP-150T for registering. User can set user name and  
password for registering. If password is no need, please set user name the same as  
line number or VIP-150T wont register successfully.  
3. pwd: set account password for registering.  
4.15 [voice] command  
The voice command is associated with the voice codec setting information.  
1. -print: display voice codec information and configuration.  
2. -send: three voice packet size can be configured as 20 ms, 40 ms or 60 ms.(only  
30 and 60 ms for G..723.1)  
3. -priority: set codecs priority in order. Please notice that user can set from 1 to 5  
codecs as their need, for example, voice priority g723 or voice priority g723  
37  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
711a g711u g729 g729a means VIP-150T can support only one codec or four  
codecs.  
4. -volume: There are three types can be adjustable, voice volume, input gain and  
DTMF volume. Voice volume means the volume user can hear, input gain means  
the volume the other side can hear from VIP-150T, DTMF means DTMF  
transmitting volume. (voice volume voice value of volume, voice volume  
input value of volume, voice volume dfmt value of volume)  
?
If value of volume set as 0 means 32db, 1 means 31dbetc.  
Note:  
5. -nscng: enable or disable sound compression and comfort noise generation. It is  
only for codec G.723.1. (0 for off, 1 for on)  
6. -echo: enable or disable echo cancellation function .  
7. -mindelay: set minimum delay of jitter buffer(0~150)  
8. -maxdealy: set maximum delay of jitter buffer(0~150)  
It is for advanced administrator use only. Please ask your distributor before  
?
changing any settings of this command.  
Note:  
38  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.16 [tos] command  
TOS/DiffServ (DS) priority function can discriminate the Differentiated Service Code  
Point (DSCP) of the DS field in the IP packet header, and map each Code Point to a  
corresponding egress traffic priority. As per the definition in RFC2474, the DS field is  
Type-of-Service (TOS) octet in IPv4. The recommended DiffServ Code Point is defined  
in RFC2597 to classify the traffic into different service classes. The mapping of Code  
Point value of DS-field to egress traffic priorities is shown as follows.  
1. High priority with DS-field.  
(1) Expected Forwarding (EF) 101110 ====> 46 (Decimal System)  
(2) Assured Forwarding (AF) 001010 ====> 10 (Decimal System)  
010010 ====> 18 (Decimal System)  
011010 ====> 26 (Decimal System)  
100010 ====> 34 (Decimal System)  
2. Low Priority with DS-field:  
Assured Forwarding (AF)  
001100 ====> 12 (Decimal System)  
010100 ====> 20 (Decimal System)  
011100 ====> 28 (Decimal System)  
100100 ====> 36 (Decimal System)  
001110 ====> 14 (Decimal System)  
010110 ====> 22 (Decimal System)  
011110 ====> 30 (Decimal System)  
100110 ====> 38 (Decimal System)  
000000 ====> 0 (Decimal System)  
1. -print : display all current configurations.  
2. rtptype: set DSCP value of signaling packets from 0 to 63  
3. siptype: set DSCP value of RTP packets from 0 to 63  
1. This command wont be functional until network environment can be  
?
capable with DSCP function.  
Note:  
2. tos -rtptype 14 -sigtype 10 is top priority of package.  
39  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.17 [ddns] command  
1. -print: display DDNS overall information and configuration.  
2. -enable: to enable/disable DDNS function.(ddns enable 0/1, 0 for disable and 1  
for enable).  
3. -server: to set IP address of DDNS login server.  
4. -hostname: to set the registered Domain Name of VIP-150T. (ex.  
ddns test.ddns.org)  
5. -id: to set login ID of registered account to log in DDNS server.  
6. -passwd: to set password of registered account to log in DDNS server.  
7. -checkip: to enable/disable check IP function. If VIP-150T is behind IP sharing,  
when this function is enabled, VIP-150T will check its public IP address by asking  
IP address check server and send to DDNS server to update DDNS data. If this  
function is disabled, when VIP-150T is behind IP sharing, it will send its private IP  
address to DDNS server.  
8. -checkipsrv: to set IP address of IP address check server.  
9. -delay: to set the update interval time. VIP-150T will re-update its IP address in this  
time. (ddns delay 1-59m/1-24h , m means minute, h means hour)  
10. -force: to force to execute DDNS update. Once user enter this command ,  
VIP-150T will update DDNS data immediately. (ddns force IP address of  
VIP-150T)  
40  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.18 [bureau] command  
1. -print: Display Bureau line information and configuration  
2. -hotline: Set Hot line information  
4.19 [rom] command  
3. -print: show all current configurations and version information.  
4. -app,-boot, -dsptest, -dspcore, -dspapp,: upgrade main boot code, main  
application code, DSP testing code, DSP kernel code, DSP application code, Ring  
Back Tone PCM file and Hold Tone .  
After upgrade Application, please remember to execute flash clean  
?
command, which will clean all configurations become factory values except IP  
Note:  
address.  
5. -boot2m: to upgrade 2mb rom file, which includes all firmware file mentioned in  
item 2.  
6. -s: it is necessary to prepare TFTP/FTP server IP address for upgrading firmware  
rom file.  
7. -f: the file name prepared for upgrading is necessary as well.  
8. method: specify download method to be TFTP or FTP(0 for TFTP.1 for FTP)  
9. ftp: specify user name and password for FTP download method.  
For example: User prepares to upgrade the latest app rom file vip150t.100, the  
TFTP server is 192.168.4.1.1.  
rom app s 192.168.1.1 f vip150t.100  
41  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Command rom print can show current version installed in VIP-150T.  
4.20 [passwd] command  
For security protection, user has to input the password before entering application  
user/config mode. Two configurations of login name/password are supported by the  
system.  
1. set: set password of rootusers or administratorusers. (passwd set  
root/administrator password)  
2. clean: clean up password restored before, and user can login :root/administrator,  
password: press enter.  
User who requests authorization to execute all configuration commands needs to login  
with root. If a user login with administrator, two commands are not functional:  
1. password set root: set password of login : root.  
2. passwd clean: clean up password restored before, and user can  
login :root/administrator, password: press enter.  
42  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5 Upgrading Software on the VIP-150T  
VIP-150T supports three methods to upgrade the new version. All methods are necessary  
to prepare the TFTP or FTP program on the host PC as TFTP/FTP server. After installing  
TFTP/FTP program on one PC and connecting to network, VIP-150T is ready to be  
upgraded.  
1. LCD Panel Control  
2. Remote Control: Telnet  
3. Web Management  
5.1 From LCD Phone Menu  
Please choose the 62 selection-Firmware Upgrade. Press OK to enter into the  
sub-selection as below.  
1. Firmware Update  
(1) Download method  
There are two methods to download new version file, please move the  
>symbol by press ç or è on the keypad to select TFTP or FTP  
method, then press OK to confirm it.  
(2) FTP/TFTP Sever  
User has to offer one TFTP/FTP server IP Address and set this IP  
Address via keypad. The IP Address is necessary for upgrading  
VIP-150T new application rom file.  
(3) Set FTP user account  
User has to input user name and password for FTP server login .It is  
necessary for upgrading VIP-150T new application rom file via FTP  
method.  
(4) File Name  
User has to press the file name of new application rom file prepared for  
upgrading  
(5) Start to Upgrade  
Select YES or NO to start upgrade. After download is finished, press OK  
then VIP-150T will ask if need to reboot.  
(6) Firmware Version  
Show versions of all software and hardware. (**)  
?
Download via LCD command can only upgrade new application rom file.  
Note:  
44  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2 Web Management  
Please refer to chapter 4.18 [rom] command  
-
-
-
-
-
Server IP Address: Set TFTP server IP address  
Target File name: Set file name prepared to upgrade  
Download Method: Select download method as TFTP or FTP  
FTP Login: Set FTP login name and password  
Target File Type: Select which sector of VIP-150T to upgrade  
1. After 2mb file download is finished, all configurations might change to  
default values, user has to configure again.  
?
2. After upgrade Application, please remember to execute Flash Clean,  
which will clean all configurations become factory values except IP  
address.  
Note:  
5.3 Remote Control: Telnet  
Please refer to chapter 4.17 [rom] command  
1. -print: show all current configurations and version information.  
45  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. -app,-boot, -dsptest, -dspcore, -dspapp,: upgrade main boot code, main  
application code, DSP testing code, DSP kernel code, DSP application code, Ring  
Back Tone PCM file and Hold Tone .  
After upgrade Application, please remember to execute flash clean  
?
command, which will clean all configurations become factory values except IP  
Note:  
address.  
3. -boot2m: to upgrade 2mb rom file, which includes all firmware file mentioned in  
item 2.  
4. -s: it is necessary to prepare TFTP/FTP server IP address for upgrading firmware  
rom file.  
5. -f: the file name prepared for upgrading is necessary as well.  
6. method: specify download method to be TFTP or FTP(0 for TFTP.1 for FTP)  
7. ftp: specify user name and password for FTP download method.  
For example: User prepares to upgrade the latest app rom file vip150t.100, the  
TFTP server is 192.168.4.1.1.  
rom app s 192.168.1.1 f vip150t.100  
Command rom print can show current version installed in VIP-150T.  
46  
PLANET VIP-150T Users Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pentax Binoculars 822 User Manual
Philips Griddle AJ3121 User Manual
Philips Home Theater System HTL2101 User Manual
Philips MP3 Player Accessories DC190 User Manual
Philips Radio AJ3915 User Manual
Poulan Lawn Mower Accessory 96072001000 User Manual
ProForm Home Gym 831237440 User Manual
ProForm Home Gym 831285870 User Manual
PYLE Audio Musical Instrument PYD1270 User Manual
PYLE Audio Music Pedal PPDLWW1 User Manual