Philips Speaker AD7000W 12 User Manual

^Rw^egw^istew^{r yo}.^up^rh^proil^di^up^cts^an.^dc^go^etm^sup/^pw^orte^atlcome

AD7000W/12

EN User manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Important

Safety

Notice

Your Entertainment System

Introduction

What’s in the box

What else you need

Overview of the main unit

Get started to use AirPlay

Prepare

Connect power

Turn AD7000W on

Connect to your homeWi-Fi network

for AirPlay

Scenario 1: Connect to a WPS router

Scenario 2: Connect to a non-WPS router

Play

Stream audio from your iTunes music library

to AD7000W

Control play

Use advanced sound settings

Play/charge your iPod/iPhone/iPad through

USB socket

Play from an external device

ꢀꢁ ꢂꢃꢄꢅꢆꢇꢁ\ꢈꢉꢊꢅꢈꢇ

ꢀꢁꢂꢃꢄꢁꢅꢆꢇꢈꢉꢊꢇꢋꢌꢆꢅꢈꢊꢇ\ꢄꢊ

ꢍꢌꢆꢅꢈꢊꢇꢎꢏꢁꢐꢇꢈꢉꢊꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢌꢅꢒꢊ

Product information

ꢔꢌꢊꢑꢓ\ꢑꢅꢈꢓꢁꢃꢕ

Troubleshooting

Download from Www.Somanuals.com. All Manuals Search And Download.

h Do not remove the casing of this product.

1 Important

i Do not expose the product to dripping /

splashing water, rain or high humidity.

Safety

j Keep this product away from direct

ꢋꢌꢍꢎꢏꢐꢑꢆꢒꢁꢍꢅꢓꢇꢄꢁ]ꢅꢉꢇꢋꢁꢔꢈꢁꢑꢇꢅꢆꢕ

Information for Europe:

k Do not install near any heat sources

such as radiators, heat registers, stoves,

or other electrical equipment (including

ꢅꢉꢃꢎꢏ\ꢇꢈꢋꢖꢕꢁ

Know these safety symbols

l Do not place any other electrical

equipment on the product.

m Do not place any sources of danger

on the product (e.g. objects containing

ꢎꢏꢗꢌꢏꢄꢋꢒꢁꢘꢌꢈꢍꢏꢍꢐꢁꢙꢅꢍꢄꢎꢇꢋꢖꢕꢁ

n This product may include batteries. Please

refer to safety and disposal instructions

for batteries in this user manual.

o Where the mains plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

The ‘exclamation mark’ calls attention to

features for which you should carefully read the

supplied literature to prevent operating and

maintenance problems.

The ‘lightening bolt’ symbol indicates uninsulated

components within the product that can cause

an electric shock.

Warning

# Never remove the casing of this apparatus.

# Never lubricate any part of this apparatus.

# Never place this apparatus on other electrical

ꢚꢁꢇꢏꢊꢆꢋꢑꢊꢇꢈꢉꢊꢇꢏꢓꢕ"ꢇꢁꢎꢇ\ꢏꢊꢇꢁꢏꢇꢊꢄꢊꢑꢈꢏꢓꢑꢇꢕꢉꢁꢑ"#ꢇꢆꢁꢇ

not expose the product to rain or moisture and

ꢆꢁꢇꢃꢁꢈꢇꢌꢄꢅꢑꢊꢇꢅꢃꢘꢇꢁ$%ꢊꢑꢈꢕꢇ\ꢄꢄꢊꢆꢇꢂꢓꢈꢉꢇꢄꢓ&ꢋꢓꢆꢕ#ꢇꢕꢋꢑꢉꢇ

as vases, on the product.

equipment.

# Keep this apparatus away from direct sunlight, naked

]ꢅꢐꢊꢕꢇꢁꢏꢇꢉꢊꢅꢈꢖꢇ

# Ensure that you always have easy access to the power

cord, plug or adaptor to disconnect this apparatus from

the power.

a Read these instructions.

b Keep these instructions.

c Heed all warnings.

Risk of overheating! Never install this apparatus

ꢓꢃꢇꢅꢇꢑꢁꢃ\ꢃꢊꢆꢇꢕꢌꢅꢑꢊꢖꢇꢗꢄꢂꢅꢘꢕꢇꢄꢊꢅꢙꢊꢇꢅꢇꢕꢌꢅꢑꢊꢇꢁꢎꢇ

at least four inches around this apparatus for

ventilation. Ensure curtains or other objects

never cover the ventilation slots on this

apparatus.

d Follow all instructions.

e Do not use this product near water.

f Clean only with dry cloth.

g Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢚꢔꢄꢏ\ꢙꢅꢆꢏꢔꢍꢋ

Mains fuse

'ꢁꢆꢓ\ꢑꢅꢈꢓꢁꢃꢕꢇꢃꢁꢈꢇꢅꢋꢈꢉꢁꢏꢓ(ꢊꢆꢇ$ꢘꢇꢈꢉꢊꢇ

manufacturer may void user’s authority to

operate this product.

This information applies only to products with a

UK mains plug.

ꢚꢉꢓꢕꢇꢌꢏꢁꢆꢋꢑꢈꢇꢓꢕꢇ\ꢈꢈꢊꢆꢇꢂꢓꢈꢉꢇꢅꢃꢇꢅꢌꢌꢏꢁꢙꢊꢆꢇꢐꢁꢄꢆꢊꢆꢇ

plug. If you replace the fuse, use one with:

#ꢇ the ratings shown on the plug,

#ꢇ a BS 1362 approval, and

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

#ꢇ the ASTA approval mark.

Contact your dealer if you are not sure about

what type of fuse to use.

Caution:To conform with the EMC directive

(2004/108/EC), do not detach the plug from

the power cord.

When this crossed-out wheeled bin symbol is

attached to a product it means that the product

is covered by the European Directive 2002/96/

EC.

Notice

Please inform yourself about the local separate

collection system for electrical and electronic

products.

Please act according to your local rules and

do not dispose of your old products with your

normal household waste. Correct disposal of

your old product helps to prevent potential

negative consequences for the environment and

human health.

This product complies with the radio

interference requirements of the European

Community.

Your product contains batteries covered by

the European Directive 2006/66/EC, which

cannot be disposed with normal household

waste.Please inform yourself about the local

rules on separate collection of batteries

because correct disposal helps to prevent

negative consequences for the environmental

and human health.

The device can be operated in the EU without

restrictions indoor, but cannot be operated

outdoors in France in the whole of the band

until further notice.

This product complies with the requirement of

the 1999/5/EC directive.

Download from Www.Somanuals.com. All Manuals Search And Download.

Information about the use of batteries:

Caution

AirPlay, iPod, and iPhone are trademarks of

Apple Inc., registered in the U.S. and other

countries. iPad is a trademark of Apple Inc.

# +ꢓꢕ"ꢇꢁꢎꢇꢄꢊꢅ"ꢅꢒꢊ;ꢇ<ꢃꢄꢘꢇꢋꢕꢊꢇꢈꢉꢊꢇꢕꢌꢊꢑꢓ\ꢊꢆꢇꢈꢘꢌꢊꢇꢁꢎꢇ$ꢅꢈꢈꢊꢏꢓꢊꢕꢖꢇ

Do not mix new and used batteries. Do not mix

different brands of batteries. Observe correct polarity.

Remove batteries from products that are not in use for

a longer period of time. Store batteries in a dry place.

# Risk of injury:Wear gloves when handling leaking

batteries. Keep batteries out of reach of children and

pets.

# Risk of explosion: Do not short circuit batteries. Do

not expose batteries to excessive heat. Do not throw

$ꢅꢈꢈꢊꢏꢓꢊꢕꢇꢓꢃꢈꢁꢇꢈꢉꢊꢇ\ꢏꢊꢖꢇꢀꢁꢇꢃꢁꢈꢇꢆꢅꢐꢅꢒꢊꢇꢁꢏꢇꢆꢓꢕꢅꢕꢕꢊꢐ$ꢄꢊꢇ

batteries. Do not recharge non-rechargeable batteries.

Class II equipment symbol:

CLASS II apparatus with double insulation, and

no protective earth provided.

Note

Environmental information

# The type plate is located on the bottom of the

apparatus.

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by

ꢅꢇꢕꢌꢊꢑꢓꢅꢄꢓ(ꢊꢆꢇꢑꢁꢐꢌꢅꢃꢘꢖꢇ=ꢄꢊꢅꢕꢊꢇꢁ$ꢕꢊꢏꢙꢊꢇꢈꢉꢊꢇ

local regulations regarding the disposal of

packaging materials, exhausted batteries and old

equipment.

“Made for iPod,”“Made for iPhone,” and “Made

for iPad” mean that an electronic accessory

ꢉꢅꢕꢇ$ꢊꢊꢃꢇꢆꢊꢕꢓꢒꢃꢊꢆꢇꢈꢁꢇꢑꢁꢃꢃꢊꢑꢈꢇꢕꢌꢊꢑꢓ\ꢑꢅꢄꢄꢘꢇꢈꢁꢇ

iPod, iPhone, or iPad, respectively, and has

$ꢊꢊꢃꢇꢑꢊꢏꢈꢓ\ꢊꢆꢇ$ꢘꢇꢈꢉꢊꢇꢆꢊꢙꢊꢄꢁꢌꢊꢏꢇꢈꢁꢇꢐꢊꢊꢈꢇ

Apple performance standards.Apple is not

responsible for the operation of this device

or its compliance with safety and regulatory

standards. Please note that the use of this

accessory with iPod, iPhone, or iPad may affect

wireless performance.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tip

2 Your

# Please visit www.philips.com/welcome for information

about more Philips AirPlay-enabled devices.

Entertainment

System

With AD7000W, you can also:

#ꢇ charge your iPod/iPhone/iPad through

the USB socket with an Apple USB

cable (not supplied).

Congratulations on your purchase, and

ꢂꢊꢄꢑꢁꢐꢊꢇꢈꢁꢇ=ꢉꢓꢄꢓꢌꢕHꢇꢚꢁꢇꢎꢋꢄꢄꢘꢇ$ꢊꢃꢊ\ꢈꢇꢎꢏꢁꢐꢇꢈꢉꢊꢇ

support that Philips offers, register your product

at www.philips.com/welcome.

#ꢇ play your iTunes music library on your

iPod/iPhone/iPad through the USB

socket directly while charging.

#ꢇ play music from other audio devices

through the MP3-LINK socket.

If you contact Philips, you will be asked for the

model and serial number of this apparatus.The

model number and serial number are on the

bottom of the apparatus.Write the numbers

here:

What’s in the box

Model No. __________________________

Serial No. ___________________________

Check and identify the contents of your

package:

#ꢇ Main unit (with a built-in Wi-Fi

module)

#ꢇ 1 x AC power adapter

#ꢇ 1 x MP3 link cable

#ꢇ User manual (in CD-ROM)

#ꢇ Quick start guide

Introduction

Apple AirPlay technology enables you to play

your iTunes music library, hosted on a Mac, PC,

iPhone, iPod touch, or iPad on any AirPlay-

enabled device (for example, your AD7000W)

connected to the Wi-Fi network.

What else you need

With an AirPlay-enabled device (for example,

your AD7000W), you can:

To stream audio wirelessly by AirPlay, you need:

#ꢇ ꢗꢇ>ꢓ?@ꢓꢇꢑꢊꢏꢈꢓ\ꢊꢆꢇꢏꢁꢋꢈꢊꢏ

#ꢇ stream audio from your iTunes music

library to any room in your house

#ꢇ choose which AirPlay-enabled devices

you want to play music on (if you

have more than one such devices in

your house)

#ꢇ A host for your iTunes music library,

for example, an iPod touch/iPhone/

iPad installed with iOS 4.3 (or later)

or a Wi-Fi enabled PC/Mac installed

with iTunes 10 (or later)

Your AD7000W should be connected to the

same local network as your iTunes host device

through the Wi-Fi router.

#ꢇ stream audio to multiple AirPlay-

enabled devices at the same time

(from the iTunes music library on your

PC/Mac only)

Download from Www.Somanuals.com. All Manuals Search And Download.

e MP3-LINK

#ꢇ Connect an external audio player

through the supplied MP3 link cable.

List of compatible iTunes host devices

for AirPlay

In terms of AirPlay,AD7000W is compatible

with:

f DC IN

#ꢇ Connect the power adaptor.

#ꢇ a Wi-Fi enabled PC/Mac installed with

iTunes 10 (or later); and

#ꢇ the following iPod/iPhone/iPad models

installed with iOS 4.3 (or later):

#ꢇ iPad 2

g USB

#ꢇ Connect an iPod/iPhone/iPad through

an Apple USB cable (not supplied).

#ꢇ iPad

Get started to use AirPlay

#ꢇ iPhone 4

#ꢇ iPhone 3GS

#ꢇ iPod touch (2nd, 3rd, and 4th

generation)

To get started with AirPlay, you need to:

1 Upgrade your iPod touch/iPhone/iPad to

the latest iOS version (iOS 4.3 or later).

#ꢇ Or install the latest version of iTunes

(iTunes 10 or later) on your PC/Mac.

Overview of the main unit

2 Connect power to AD7000 W , t hen turn it

on (see ‘Prepare’ on page 9).

3 Connect AD7000W to your existing home

Wi-Fi network (see ‘Connect to your

home Wi-Fi network for AirPlay’ on page

10).

4 Make sure that your iPod touch/iPhone/

iPad or PC/Mac are also connected to the

same Wi-Fi network.

f g

a Power indicator

b +/-

#ꢇ Adjust volume.

#ꢇ Turn the unit on/off.

#ꢇ (Press and hold) reset the unit.

d WI-FI SETUP button/indicator

#ꢇ Connect the unit to a Wi-Fi network.

#ꢇ Show the Wi-Fi connection status of

the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Prepare

Turn AD7000W on

1 ^Presson the back to turn the unit on.

2 Wait for successful boot-up of the unit.

Always follow the instructions in this chapter in

sequence.

» The boot-up takes about 35 seconds.

» During boot-up, the Wi-Fi SETUP

indicator on the back of the unit blinks

green quickly.

» After boot-up, if no Wi-Fi connection

has been set up for AD7000W, the

Wi-Fi SETUP indicator starts to blink

green slowly.

Connect power

Caution

# Risk of product damage! Make sure that the power

supply voltage matches the voltage printed on the

bottom of the unit.

#ꢇ To switch the unit to Eco standby mode,

press again.

#ꢇ To switch the unit on from Eco standby

mode, press again.

# Risk of electric shock! When you unplug the AC

adaptor, always pull the plug from the socket. Never

pull the cord.

# Before you connect the AC adaptor, make sure that you

have completed all the other connections.

#ꢇ Connect the AC power cord to

#ꢇ the DC IN socket on the back of the

unit.

#ꢇ the wall power socket.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before connection of AD7000W to you home

Wi-Fi network, check the points below.

4 Connect to

your homeWi-

Fi network for

AirPlay

1 Make sure that your Wi-Fi router is

powered on and working properly.

2 Make sure that AD7000W has been

powered on and booted up successfully

(see ‘Turn AD7000W on’ on page 9).

3 Identify the type of your Wi-Fi router (see

the user manual of your Wi-Fi router for

details).

Scenario 1: Connect to a

WPS router

Note

# Before you press any button on AD7000W, make sure

that AD7000W has been booted up successfully (see

‘Turn AD7000W on’ on page 9).

1 Press the WPS button on your home Wi-Fi

router.

To connect AD7000W to your existing home

Wi-Fi network, you need to apply your home

Wi-Fi settings to AD7000W.

WPS

You can do this in two ways (depending on

which type of Wi-Fi router you use):

#ꢇ Automatically - if your Wi-Fi router

is WPS (Wi-Fi Protected Setup)-

enabled and supports PBC (Push

Button Connection) (see ‘Scenario 1:

Connect to a WPS router’ on page

10)

#ꢇ Manually - if your Wi-Fi router does

not support WPS (see ‘Scenario 2:

Connect to a non-WPS router’ on

page 11)

2 Shortly after step 1, press Wi-Fi SETUP on

the back of AD7000W.

Once connected successfully,AD7000W will

remember your home Wi-Fi settings.Then

you can enjoy AirPlay whenever AD7000W is

powered on and connected to your home Wi-

Fi network automatically.

» The Wi-Fi SETUP indicator blinks red,

yellow and green alternately.

» Within 2 minutes, the WI-FI SETUP

indicator stops blinking and stays green,

and the unit beeps.

10 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

» AD7000W is connected to your home

The Wi-Fi enabled device can be an iPod touch/

iPhone/iPad or a Wi-Fi enabled PC/Mac.

Wi-Fi network successfully.

Follow the sequence below for connection of

AD7000W to a non-WPS Wi-Fi router.

1 Collect settings of your home Wi-Fi router

and write down on paper for use during

AD7000W Wi-Fi setup (see ‘Collect

settings of your home Wi-Fi router’ on

page 11).

2 Switch AD7000W to Assisted Wi-Fi Setup

mode (see ‘Switch AD7000W to Assisted

Wi-Fi Setup mode’ on page 12).

» A new Wi-Fi network created by

AD7000W will appear, with the

network name (SSID) of Philips Fidelio

AirPlay.

3 Connect your Wi-Fi enabled device to the

newly created Wi-Fi network temporarily

(see ‘Connect your Wi-Fi enabled device to

the newly created Wi-Fi network’ on page

12).

4 Open the built-in web page of AD7000W

with the Internet Browser of your Wi-Fi

enabled device (see ‘Open the built-in web

page of AD7000W’ on page 14).

5 Change the internal Wi-Fi settings of

AD7000W based on the settings you

wrote on paper at step 1 (see ‘Change the

internal Wi-Fi settings of AD7000W’ on

page 15).

Tip

# For some Wi-Fi routers, you may need to hold the

WPS button for Wi-Fi connection or enable the WPS

=VXꢇꢎꢋꢃꢑꢈꢓꢁꢃꢇꢎꢏꢁꢐꢇꢈꢉꢊꢇꢏꢁꢋꢈꢊꢏꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢌꢅꢒꢊꢕꢖꢇꢔꢊꢊꢇ

ꢈꢉꢊꢇꢋꢕꢊꢏꢇꢐꢅꢃꢋꢅꢄꢕꢇꢁꢎꢇꢈꢉꢊꢇꢕꢌꢊꢑꢓ\ꢑꢇꢏꢁꢋꢈꢊꢏꢕꢇꢎꢁꢏꢇꢆꢊꢈꢅꢓꢄꢕꢖ

# If the Wi-Fi SETUP indicator on AD7000W blinks

yellow, it means that the Wi-Fi connection has failed.

Please wait for 2 minutes and try again. If the problem

remains, try to set up the Wi-Fi connection manually

(see ‘Scenario 2: Connect to a non-WPS router’ on

page 11).

# If the Wi-Fi connection fails again, press and hold on

the back of AD7000W to reset it, and then try again.

6 Restore your Wi-Fi enabled device back

to your existing home Wi-Fi settings (see

‘Restore your Wi-Fi enabled device back to

your existing home Wi-Fi setting’ on page

16).

Scenario 2: Connect to a

non-WPS router

Note

# You can also follow the procedures below to connect

AD7000W to a WPS router manually.

Collect settings of your homeWi-Fi

router

To connect AD7000W to a Wi-Fi router

manually, you need access to AD7000W’s

$ꢋꢓꢄꢈ?ꢓꢃꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢂꢊ$ꢇꢌꢅꢒꢊꢇꢎꢁꢏꢇꢑꢉꢅꢃꢒꢊꢇꢁꢎꢇ

its internal Wi-Fi settings.To do so, you need a

Wi-Fi enabled device with an Internet browser

for temporary Wi-Fi connection to AD7000W.

Note

# Always consult the user manual of your home Wi-Fi

router for detailed instructions.

EN 11

Download from Www.Somanuals.com. All Manuals Search And Download.

#ꢇ Press and hold Wi-Fi SETUP on the back

of AD7000W for more than 5 seconds.

» The Wi-Fi SETUP indicator blinks

green and yellow alternately.

1 Connect your Wi-Fi enabled device to

your existing home Wi-Fi network.

2 Launch the Internet browser (for example,

Apple Safari or Microsoft Internet

» A new Wi-Fi network created by

AD7000W will appear, with the

network name (SSID) of Philips Fidelio

AirPlay.

» It may take up to 45 seconds for

successful creation of this new Wi-Fi

network.

Explorer) on your Wi-Fi enabled device.

3ꢇ <ꢌꢊꢃꢇꢈꢉꢊꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢌꢅꢒꢊꢇꢁꢎꢇꢘꢁꢋꢏꢇ

home Wi-Fi router.

4 Find the Wi-Fi settings tab and write down

the following information on paper:

A Network name (SSID)

B Wi-Fi security mode (usually WEP,

WPA or WPA2 if enabled)

Note

C Wi-Fi password (if Wi-Fi security is

enabled)

# ꢗꢎꢈꢊꢏꢇꢘꢁꢋꢇ\ꢃꢓꢕꢉꢇꢐꢅꢃꢋꢅꢄꢇ>ꢓ?@ꢓꢇꢕꢊꢈꢋꢌꢇꢎꢁꢏꢇꢗꢀZ[[[>#ꢇ

the new Wi-Fi network created by AD7000W will

disappear.

# If you fail to enter Assisted Wi-Fi Setup mode, power

off AD7000W and power on it, then try again after

successful boot-up.

D DHCP mode (enabled or disabled)

E Static IP address settings (if DHCP

mode is disabled)

# Make sure that there are no other Philips AirPlay-

enabled devices in Assisted Wi-Fi Setup mode at the

same time. Multiple Wi-Fi networks created this way

may interfere with each other.

Switch AD7000W to AssistedWi-Fi

Setup mode

Note

# Before you press any button on AD7000W, make sure

that AD7000W has been booted up successfully (see

‘Turn AD7000W on’ on page 9).

Connect yourWi-Fi enabled device to

the newly createdWi-Fi network

The new Wi-Fi network created by AD7000W

only allows access of one Wi-Fi enabled device.

To avoid interference from any other Wi-Fi

devices, you are recommended to temporarily

disable the Wi-Fi function on your other Wi-Fi

devices.

Option 1: Use your iPod touch/iPhone/iPad

1 Select Settings -> Wi-Fi on your iPod

touch/iPhone/iPad.

12 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Wait until successful Wi-Fi connection on

your iPod touch/iPhone/iPad.

is displayed at the upper left corner

of your iPod touch/iPhone/iPad.

Tip

# If Philips Fidelio AirPlay is not in the list, try to scan the

available Wi-Fi networks again.

Use yourWi-Fi enabled PC/Mac

Note

# See the user manual of your PC/Mac for how to

connect your PC/Mac to a Wi-Fi network.

# During Wi-Fi network connection, do not connect any

network cable to your PC/Mac.

1 Open the Wi-Fi setup tool or control

panel on your PC/Mac.

2 Scan the available Wi-Fi networks.

2 Select Philips Fidelio AirPlay from the list

of available networks.

Philips Fidelio AirPlay

3 Select Philips Fidelio AirPlay from the list

of available networks.

EN 13

Download from Www.Somanuals.com. All Manuals Search And Download.

192.168.1.1

4 Wait until successful Wi-Fi connection on

your PC/Mac.

If you use Safari on yourWi-Fi enabled PC/

Mac, you can also select ‘Philips_Fidelio XXX’

from the Bonjour pull-down list to enter the

ꢛ!"###$ꢁꢙꢔꢍ\ꢐꢌꢈꢅꢆꢏꢔꢍꢁꢊꢇꢘꢁꢃꢅꢐꢇꢁꢄꢏꢈꢇꢙꢆꢎ%ꢕ

1 Click -> Preferences.

» The Bookmarks menu is displayed.

Tip

# If Philips Fidelio AirPlay is not in the list, try to scan the

available Wi-Fi networks again.

Open the built-in web page of

AD7000W

1 Launch Apple Safari browser or any other

Internet browser on your Wi-Fi enabled

device.

2 Type in 192.168.1.1 at the browser

ꢅꢆꢆꢏꢊꢕꢕꢇ$ꢅꢏꢇꢅꢃꢆꢇꢑꢁꢃ\ꢏꢐꢖ

» ꢚꢉꢊꢇꢗꢀZ[[[>ꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇ

web page is displayed.

14 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Tick Include Bonjour for Bookmarks bar.

3 Select ‘Philips_Fidelio XXX’ from the

Bonjour pull-down list shown at the

bookmarks bar.

» ꢚꢉꢊꢇꢗꢀZ[[[>ꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢂꢊ$ꢇ

page is displayed.

#ꢇ Follow the on-screen instructions to

ꢑꢉꢅꢃꢒꢊꢇꢅꢃꢆꢇꢑꢁꢃ\ꢏꢐꢇꢈꢉꢊꢇꢓꢃꢈꢊꢏꢃꢅꢄꢇ>ꢓ?@ꢓꢇ

settings of AD7000W.

» After a while, the indicator on the back

of AD7000W stops blinking and stays

green, and the unit beeps.

» AD7000W is connected to your

existing home Wi-Fi network

successfully.

Note

Change the internalWi-Fi settings of

AD7000W

# If the WI-FI SETUP indicator on AD7000W does not

stay green steadily, it means that the Wi-Fi connection

has failed. Please power off both your Wi-Fi router

and AD7000W and then power on them again to see

whether AD7000W can be connected to your home

Wi-Fi network. If the problem remains, try the above

procedures again.

# ꢗꢎꢈꢊꢏꢇꢘꢁꢋꢇ\ꢃꢓꢕꢉꢇꢈꢉꢊꢇꢅ$ꢁꢙꢊꢇꢑꢉꢅꢃꢒꢊꢕꢇꢁꢏꢇꢌꢁꢂꢊꢏ?ꢁꢎꢎꢇꢅꢃꢆꢇ

power-on of AD7000W, the new Wi-Fi network

created by AD7000W will disappear.

<ꢃꢇꢈꢉꢊꢇꢗꢀZ[[[>ꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢂꢊ$ꢇꢌꢅꢒꢊ#ꢇ

you can change the internal Wi-Fi settings of

AD7000W for connection of AD7000W to

your existing home Wi-Fi network.

Note

# 'ꢅ"ꢊꢇꢕꢋꢏꢊꢇꢈꢉꢅꢈꢇꢈꢉꢊꢇꢕꢊꢈꢈꢓꢃꢒꢕꢇꢁꢃꢇꢈꢉꢊꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢂꢊ$ꢇ

page match your home Wi-Fi network settings that you

wrote on paper.

Tip

# If you like, you can change the name of your AD7000W

in Advanced settings -> AirPlay Device Name on the

ꢗꢀZ[[[>ꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢂꢊ$ꢇꢌꢅꢒꢊꢖꢇꢚꢉꢓꢕꢇꢓꢕꢇꢉꢊꢄꢌꢎꢋꢄꢇꢂꢉꢊꢃꢇ

you have multiple Philips AirPlay-enabled devices in

your house and you need to distinguish between them.

# If you want to enter the network name (SSID) manually

(for example, if you want to hide your SSID), go to

Advanced settings -> CONFIGURE MANUALLY on

ꢈꢉꢊꢇꢗꢀZ[[[>ꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢂꢊ$ꢇꢌꢅꢒꢊꢖ

EN 15

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Select your network name (SSID) from the

Restore yourWi-Fi enabled device

back to your existing homeWi-Fi

setting

list of available wireless networks.

Note

# Make sure that the settings at steps 2 to 3 below match

your home Wi-Fi network settings you wrote on paper.

1 Select Settings ->Wi-Fi on your iPod

touch/iPhone/iPad.

#ꢇ Or open the list of available Wi-Fi

networks on your PC/Mac.

3 Enter the network key if required.

4 Wait until successful Wi-Fi connection to

your home Wi-Fi network.

16 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Select Philips_Fidelio XXXX (or user

5 Play

ꢑꢋꢕꢈꢁꢐꢓ(ꢊꢆꢇꢃꢅꢐꢊ`ꢇꢎꢏꢁꢐꢇꢈꢉꢊꢇꢗꢓꢏ=ꢄꢅꢘꢇꢄꢓꢕꢈꢖ

Stream audio from your

iTunes music library to

AD7000W

Note

# Make sure that your iTunes host device is connected

to the same Wi-Fi network as AD7000W.Your iTunes

device can be an iPod touch/iPhone/iPad installed with

iOS 4.3 (or later) or a Wi-Fi enabled PC/Mac installed

with iTunes 10 (or later).

Stream from your iPod touch/iPhone/

iPad

4ꢇ ꢔꢊꢄꢊꢑꢈꢇꢅꢇꢐꢊꢆꢓꢅꢇ\ꢄꢊꢇꢅꢃꢆꢇꢕꢈꢅꢏꢈꢇꢌꢄꢅꢘꢖ

» After a while, you will hear music from

AD7000W.

1 Launch the iPod application on your iPod

touch/iPhone/iPad.

2 Tap on the AirPlay icon.

Note

# If you fail to hear music after successful setup, do one of

the following on your iPod touch/iPhone/iPad:

# (1) Disconnect and then re-connect to the same Wi-Fi

router again;

# (2) Close all applications running at the background;

# (3) Power off and then power on your iPod touch/

iPhone/iPad again.

EN 17

Download from Www.Somanuals.com. All Manuals Search And Download.

Tip

Stream from your PC/Mac

1 Launch iTunes 10 (or a later version) on

# When you stream audio from your iTunes music library

on a PC/Mac, you can select more than one AirPlay-

enabled devices (if available) at step 3 to stream music

to all of them at the same time.

your PC/Mac.

2 Click the AirPlay icon on the window.

# If you are using an earlier version of iTunes, the AirPlay

icon may be instead of

Control play

You can select different play options from either

your iTunes host device or AD7000W.

Note

# Make sure that you have successfully streamed audio

from your iTunes music library to AD7000W.

3 Select Philips_Fidelio_AirPlay XXXX (or

ꢋꢕꢊꢏꢇꢑꢋꢕꢈꢁꢐꢓ(ꢊꢆꢇꢃꢅꢐꢊ`ꢇꢎꢏꢁꢐꢇꢈꢉꢊꢇꢗꢓꢏ=ꢄꢅꢘꢇ

list.

#ꢇ To pause or resume play, press

#ꢇ To adjust volume, press +/- repeatedly.

Tip

# If you are streaming music from a PC/Mac, to control

music play from AD7000W, remember to tick Allow

iTunes audio control from remote speakers in Edit ->

Preferences -> Devices on iTunes.

Use advanced sound settings

If your iTunes host device is an iPod touch/

iPhone/iPad:

4ꢇ ꢔꢊꢄꢊꢑꢈꢇꢅꢇꢐꢊꢆꢓꢅꢇ\ꢄꢊꢇꢅꢃꢆꢇꢕꢈꢅꢏꢈꢇꢌꢄꢅꢘꢖ

» After a while, you will hear music from

AD7000W.

For advanced sound settings and additional

features, you can use your iPod touch/iPhone/

iPad to download the Philips Fidelio application

from Apple App Store. It is a free application

from Philips.

If your iTunes host device is aWi-Fi enabled

PC/Mac:

For advanced sound settings, you can use the

ꢊ&ꢋꢅꢄꢓ(ꢊꢏꢇꢅꢙꢅꢓꢄꢅ$ꢄꢊꢇꢁꢃꢇꢓꢚꢋꢃꢊꢕꢇꢆꢓꢏꢊꢑꢈꢄꢘꢇzView ->

Show Equalizer).

Tip

# See the iTunes help documentation for more details.

18 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

#ꢇ iPhone 3GS

Play/charge your iPod/iPhone/

iPad through USB socket

#ꢇ iPhone 3G

#ꢇ iPhone

#ꢇ iPod classic

#ꢇ iPod 5G

Note

#ꢇ iPod 4G

# The USB socket is only compatible with iPod/iPhone/

iPad.

#ꢇ iPod nano (2nd, 3rd, 4th, 5th, and 6th

generation)

#ꢇ iPod touch (1st, 2nd, 3rd, and 4th

generation)

You can play or charge your iPod/iPhone/iPad

through the USB socket with an Apple USB

cable (not supplied).

Play from an external device

If you have stopped audio streaming by AirPlay,

after successful USB connection, the unit

switches to the USB source automatically.

You can also listen to an external audio player

through the unit.

If you have stopped both audio streaming

by AirPlay and play through the USB socket,

the unit switches to the MP3 link source

automatically.

#ꢇ Connect an Apple USB cable (not

supplied) to:

#ꢇ the USB

socket on the back of

AD7000W.

#ꢇ the dock connector on your iPod/

iPhone/iPad.

#ꢇ Connect the supplied MP3 link cable to:

#ꢇ the MP3-LINK socket on the back of the

unit.

Compatible iPod/iPhone/iPad

The USB socket supports play and charge of

the following iPod, iPhone, and iPad models.

#ꢇ iPad 2

#ꢇ iPad

#ꢇ iPhone 4

#ꢇ the headphone jack on an external

audio player.

EN 19

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Update

firmware

Update from the

ꢙꢔꢍ\ꢐꢌꢈꢅꢆꢏꢔꢍꢁꢃꢅꢐꢇ

Warning

# Always connect your AD7000W to AC power for

\ꢏꢐꢂꢅꢏꢊꢇꢋꢌꢒꢏꢅꢆꢊꢖꢇ{ꢊꢙꢊꢏꢇꢌꢁꢂꢊꢏꢇꢁꢎꢎꢇꢘꢁꢋꢏꢇꢗꢀZ[[[>ꢇ

ꢆꢋꢏꢓꢃꢒꢇ\ꢏꢐꢂꢅꢏꢊꢇꢋꢌꢒꢏꢅꢆꢊꢖ

Note

# }ꢁꢋꢇꢑꢅꢃꢇꢁꢃꢄꢘꢇꢋꢌꢆꢅꢈꢊꢇꢈꢉꢊꢇ\ꢏꢐꢂꢅꢏꢊꢇꢎꢏꢁꢐꢇꢅꢇ=X~'ꢅꢑꢖ

Note

# To use an Internet browser other than Apple Safari

on your PC/Mac, remember to go to the Wi-Fi router

ꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢌꢅꢒꢊꢇꢅꢃꢆꢇꢂꢏꢓꢈꢊꢇꢆꢁꢂꢃꢇꢈꢉꢊꢇ|=ꢇꢅꢆꢆꢏꢊꢕꢕꢇꢁꢎꢇ

your AD7000W. See the user manual of your Wi-Fi

ꢏꢁꢋꢈꢊꢏꢇꢎꢁꢏꢇꢉꢁꢂꢇꢈꢁꢇ\ꢃꢆꢇꢈꢉꢊꢇ|=ꢇꢅꢆꢆꢏꢊꢕꢕꢊꢕꢇꢁꢎꢇꢆꢊꢙꢓꢑꢊꢕꢇ

connected to the Wi-Fi router.

!ꢔꢊꢍꢎꢔꢅꢄꢁꢆꢑꢇꢁꢌꢃꢄꢅꢆꢇꢁ\ꢎꢇ

www.philips.com/support

1 Power on AD7000W (see ‘Turn

AD7000W on’ on page 9).

XXXX

» It takes about 35 seconds for the unit

to boot up. During boot-up, the WI-FI

SETUP indicator on the back of the

unit blinks green quickly.

» After boot-up, you can hear a beep

and the WI-FI SETUP indicator

turns to green steadily.AD7000W is

ꢑꢁꢃꢃꢊꢑꢈꢊꢆꢇꢈꢁꢇꢈꢉꢊꢇꢄꢅꢕꢈꢇꢑꢁꢃ\ꢒꢋꢏꢊꢆꢇ>ꢓ?@ꢓꢇ

network automatically.

XXXX. zip

2 Make sure that AD7000W and your PC/

Mac are connected to the same Wi-Fi

router.

3 Open Apple Safari on your PC/Mac, then

select ‘Philips_Fidelio XXX’ from the

Bonjour pull-down list.

1 On your PC/Mac, go to www.philips.com/

support.

2ꢇ ꢃꢈꢊꢏꢇꢈꢉꢊꢇꢐꢁꢆꢊꢄꢇꢃꢋꢐ$ꢊꢏꢇꢈꢁꢇ\ꢃꢆꢇꢈꢉꢊꢇꢄꢅꢈꢊꢕꢈꢇ

\ꢏꢐꢂꢅꢏꢊꢇꢋꢌꢒꢏꢅꢆꢊꢇ\ꢄꢊꢇꢅꢙꢅꢓꢄꢅ$ꢄꢊꢖ

3ꢇ ꢇꢔꢅꢙꢊꢇꢈꢉꢊꢇꢋꢌꢒꢏꢅꢆꢊꢇ\ꢄꢊꢇꢈꢁꢇꢘꢁꢋꢏꢇꢉꢅꢏꢆꢇꢆꢏꢓꢙꢊꢖ

#ꢇ Or open any other Internet browser

on your PC/Mac, then type in the IP

address of AD7000W (available on

ꢈꢉꢊꢇ>ꢓ?@ꢓꢇꢏꢁꢋꢈꢊꢏꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇꢌꢅꢒꢊ`ꢇ

at the address bar.

» ꢇꢚꢉꢊꢇꢗꢀZ[[[>ꢇꢑꢁꢃ\ꢒꢋꢏꢅꢈꢓꢁꢃꢇ

web page is displayed.

20 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Follow the on-screen instructions to

ꢑꢁꢐꢌꢄꢊꢈꢊꢇꢈꢉꢊꢇ\ꢏꢐꢂꢅꢏꢊꢇꢋꢌꢆꢅꢈꢊꢖ

Note

# |ꢃꢇꢑꢅꢕꢊꢇꢈꢉꢊꢇ\ꢏꢐꢂꢅꢏꢊꢇꢋꢌꢆꢅꢈꢊꢇꢎꢅꢓꢄꢕ#ꢇꢘꢁꢋꢇꢑꢅꢃꢇꢈꢏꢘꢇꢈꢉꢊꢇꢅ$ꢁꢙꢊꢇ

procedures again.

# ꢗꢎꢈꢊꢏꢇꢕꢋꢑꢑꢊꢕꢕꢎꢋꢄꢇ\ꢏꢐꢂꢅꢏꢊꢇꢋꢌꢆꢅꢈꢊ#ꢇꢓꢎꢇꢈꢉꢊꢏꢊꢇꢓꢕꢇꢅꢃꢘꢇ

problem with the Wi-Fi connection, press and hold

on AD7000W for more than 5 seconds to reset the

device, and then try to set up the Wi-Fi network for

AD7000W again (see ‘Connect to your home Wi-Fi

network for AirPlay’ on page 10).

EN 21

Download from Www.Somanuals.com. All Manuals Search And Download.

General information

7 Product

information

AC power

Input: 100 - 240

‚#ꢇƒ[~„[ꢇꢛ(ꢇ

1A/1.2 A

Output: 12V

3.0 A

Note

Operation Power

Consumption

Power Consumption in

Standby Mode

25 W

# Product information is subject to change without prior

notice.

< 0.5 W

Dimensions

- Main Unit (L x W x H) 298 x 98 x

168 mm

Weight

&ꢃꢇꢙꢏ\ꢙꢅꢆꢏꢔꢍꢋ

ꢛꢉꢃꢎꢏ\ꢇꢈ

Rated Output Power 2 X 5 W RMS

Frequency Response „ˆꢇꢛ(ꢇ?ꢇ‰Šꢇ"ꢛ(#ꢇ/ˆꢇꢆV

Signal to Noise Ratio > 90 dB

- With Packing

- Main Unit

2.02 kg

1.36 kg

MP3 Link

600 mV RMS 20 kohm

Speakers

Speaker Impedance

Speaker Driver

Sensitivity

8 ohm

66 mm full range

82 dB/m/W

Wireless

standard

Wireless

security

Frequency

range

802.11b/g

WEP (64 or 128 bit),

WPA/WPA2 (8-63 characters)

Œ‘‰Œꢇ?ꢇŒ‘„Œꢇ'ꢛ(ꢇzXꢛ‰?

CH11) (for /79, /37, /55, /97)

Œ‘‰Œꢇ?ꢇŒ‘ZŒꢇ'ꢛ(ꢇzXꢛ‰?

CH13) (for /12, /10, /05)

Yes

PBC (one

button push)

22 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Wi-Fi network connection failed

8 Troubleshooting

Check if your Wi-Fi router is Wi-Fi

Š[Œꢖ‰‰$~ꢒꢇꢑꢊꢏꢈꢓ\ꢊꢆꢖꢇꢚꢉꢓꢕꢇꢆꢊꢙꢓꢑꢊꢇꢓꢕꢇꢁꢃꢄꢘꢇ

ꢑꢁꢐꢌꢅꢈꢓ$ꢄꢊꢇꢂꢓꢈꢉꢇ>ꢓ?@ꢓꢇŠ[Œꢖ‰‰$~ꢒꢇꢑꢊꢏꢈꢓ\ꢊꢆꢇ

routers.

If your Wi-Fi router is Wi-Fi 802.11n

ꢑꢊꢏꢈꢓ\ꢊꢆ#ꢇꢐꢅ"ꢊꢇꢕꢋꢏꢊꢇꢈꢁꢇꢊꢃꢅ$ꢄꢊꢇꢈꢉꢊꢇ

802.11b/g mode.AD7000W does not

support connection to routers with

802.11n only.

Warning

# Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair

the system yourself.

This device does not support the WPS-

PIN method.

If your Wi-Fi router supports WPS and the

WPS-PBC method but fails to connect to

AD7000W, try the manual Wi-Fi setup

method (see ‘Scenario 2: Connect to a

non-WPS router’ on page 11).

If you encounter problems when using this

apparatus, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips web site (www.

philips.com/welcome).When you contact

Philips, ensure that the apparatus is nearby

and the model number and serial number are

available.

Enable SSID broadcast on the Wi-Fi router.

Keep away from potential sources of

interference which may affect Wi-Fi signal,

such as microwave ovens.

No power

If you fail to use your PC for Wi-Fi network

setup, check whether your PC is using a

Wi-Fi network.You cannot use Ethernet

connection for AirPlay network setup.

Make sure that the SSID name of your

home router consists of alphanumeric

characters, with no space or special

characters like %/#/* inserted.

If you choose to rename the AirPlay device

‘Philips_Fidelio XXXX’ in the setting

menu, do not use special characters or

symbols.

For some new types of Wi-Fi routers, a

network name (SSID) may be created

automatically when you use WPS for

connection.Always change the default

network name (SSID) to a simple one that

consists of alphanumerical characters, and

also change the Wi-Fi security mode to

secure your network.

Make sure that the AC power plug of the

device is connected properly.

Make sure that there is power at the AC

outlet.

No sound

Adjust the volume.

Check the Wi-Fi network connection.

Set up the network again if needed (see

‘Connect to your home Wi-Fi network for

AirPlay’ on page 10).

No response from the unit

Press and hold on AD7000W for more

than 5 seconds to reset the device.Then

set up the Wi-Fi network for AD7000W

again (see ‘Connect to your home Wi-Fi

network for AirPlay’ on page 10).

Disconnect and reconnect the AC power

plug, and then switch on the device again.

EN 23

Download from Www.Somanuals.com. All Manuals Search And Download.

Occasional breaking of AirPlay music streaming

Do one or all of the following:

Move AD7000W closer to yourWi-Fi router.

Remove any obstacles between AD7000W

and your Wi-Fi router.

Avoid using Wi-Fi channel which is

overlapped by the nearby Wi-Fi network.

Check if your network speed is fast enough

(in cases where multiple devices share the

same router, the AirPlay performance may

be affected).Turn off the other devices

connected to your home router.

Enable the Quality of Service (QoS)

option (if available on the Wi-Fi router).

Turn off other Wi-Fi routers.

No AirPlay icon on my iTunes host device

Make sure that AD7000W is already

connected to your home Wi-Fi network.

Before you open iTunes, make sure that

you have enabled Bonjour service in

your PC.Take Windows XP for example:

to enable the service, you can click

Start->Control Panel, and double-click

AdministrativeTools-> Services->Bonjour

Service, then click Start followed by OK

on the pop-up menu.

If the problem remains, try to restart

AD7000W.

AirPlay connection failed with Mac or PC

ꢚꢊꢐꢌꢁꢏꢅꢏꢓꢄꢘꢇꢆꢓꢕꢅ$ꢄꢊꢇꢈꢉꢊꢇ\ꢏꢊꢂꢅꢄꢄꢇꢅꢃꢆꢇ

security software to see whether it blocks

the ports that AirPlay uses to stream

content. See the help documentation of

ꢘꢁꢋꢏꢇ\ꢏꢊꢂꢅꢄꢄꢇꢅꢃꢆꢇꢕꢊꢑꢋꢏꢓꢈꢘꢇꢕꢁꢎꢈꢂꢅꢏꢊꢇꢁꢃꢇꢉꢁꢂꢇ

to unblock the ports used by AirPlay.

When you use iPodTouch/iPhone/iPad/

Mac/PC for AirPlay, if the music play breaks

or stops, try to restart your iPodTouch/

iPhone/iPad, iTunes or AD7000W.

Video streaming or FTP downloads may

overload your router and therefore may

cause interruptions during AirPlay music

play.Try to reduce the load of your router.

24 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

AD7000W_12_UM_V1.0

Download from Www.Somanuals.com. All Manuals Search And Download.

Pelco Home Theater System EA2010 User Manual
Philips Portable CD Player PSA410 User Manual
Philips Projector SC940SBC User Manual
Philips Universal Remote 14PV182 58 User Manual
Pioneer Car Video System S DV440 User Manual
Planar Car Video System LA1500RTR User Manual
Power Acoustik Car Video System PMD 121CMX User Manual
Praktica Digital Camera DC Slim 520 User Manual
Pride Mobility Mobility Aid MV User Manual
ProForm Home Gym PFEL058070 User Manual