OWNER'S MANUAL
ANTI-SHOCK COMPACT DISC PLAYER
SUPER POWER OUTPUT
AUXILIARY INPUT
FACE DETACHABLE PANEL
FM-AM FM-MPX RADIO RECEIVER
WITH REMOTE CONTROL
MODEL: PLCD44
P / N : 570-961612-05
Download from Www.Somanuals.com. All Manuals Search And Download.
10. PANEL RELEASE BUTTON
This button is used to release the panel from the unit. To detach the front panel, press the button so that the left side of the
panel is released. Grasp the released side and pull it off of the chassis. To re-attach the panel, insert the right side of the panel
in place first and then press the left side of the panel until the chassis hold the panel firmly.
11. MODE SELECTION
Press this button to select Radio (TUNER), CD (S-CDP), or Auxiliary input (AUX) mode.
12. LOCAL/DISTANT SELECTOR
Press this button to prevent strong local stations from overlapping weaker stations. For normal operation, press this button again
for distance.
13. LOUD CONTROL
Press this button to activate the loudness circuitry which compensates for loss of high and low frequencies during low volume
levels.
14. MUTE CONTROL
Press this button to mute the volume control and “MUT” will appear on LCD display.
15. AUDIO / SETTING SELECT
Briefly press the button to select volume, bass, treble, balance or fader adjustment in cyclical mode.
Whenpressingthebuttonformorethan2seconds,itactivatesasunitsettingselectionincyclicalmodeasfollowing.Theunitsettingcan
bechangedbyusingeither“VOL+”or“VOL–”button.
• DSP OFF/ POP M/ ROCK M/ CLASS M/ FLAT M
• BEEPOFF/BEEPON(notavailableforthismodel)
• SEEK1(tuneup/downbuttonperformsfasttunefunction)/SEEK2(performsautotuningfunctionwhentuneup/downbutton
pressedmorethan1second)
• COLOR 1 / COLOR 2 (not available for this model)
• VOL LAST / VOL ADJ (preset volume level when unit turn on)
16/17. AUDIO LEVEL DOWN/UP CONTROL ( - Button ) / ( + Button )
Press “SEL” button shortly and then pressing “+” or “-” button to adjust level of volume, bass, treble, balance or fader.
• VOLUME - Press the (+) button to increase, or (-) button to decrease volume level.
• BASS - While “BASS” is being displayed, press (+) button to increase or (-) button to decrease the bass level.
• TREBLE - While “TREB” is being displayed, press (+) button to increase or (-) button to decrease the treble level.
• BALANCE - While “BAL” is being displayed, press (+) or (-) button to level balance of speaker right and left.
• FADER - While “FAD” is being displayed, press (+) or (-) button to level fader of speaker front and rear.
18/19. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL
On radio mode, press the button will tune one frequency step higher or lower. Pressing the button more than 1 second can
performs fast tuning function or auto tuning function.
On CD mode, press this button will locate the beginning of the track being played or will locate the beginning of the next track.
When pressing more than 2 seconds, it will move fast forward or fast backward to a specific position of a CD/MP3 track.
20. STATION PRESET BUTTON (1-6)
The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each preset button can
store FM1, FM2, FM3, MW1, MW2 station frequency. Pressing the button momentarily recalls the station frequency which was
memorized. There are 6 preset buttons, giving you capability of storing 18FM / 12MW.
NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station frequency will be
stored in the button pressed. After this, the memorized station can be recalled by pressing the button once.
On CD Mode
• Preset 1 - press this button to pause the disc played.
• Preset 2 - press this button to scan the first 10 seconds of all the tracks on the currently selected disc.
• Preset 3 - press this button to repeat the current track of the disc.
• Preset 4 - press this button to play disc at random order - Disc shuffle play.
Page. 3
P / N : 570-961612-05
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRE CONNECTION
RESET FUNCTION
The RESET button is located on the front of main panel. It
is recessed in order to prevent accidental engagement,
and can be activated with the tip of a ball-point pen or any
similar pointed object. This reset circuitry is provided in
order to protect the unit's microprocessor, and should only
be activated under the following conditions :
a) Initial installation after all wiring is completed.
b) Abnormal operation is encountered such as numerical
indication on display is erratic.
c) Whenever the reset button is activated, all preset
memory content will be erased and must be
reprogrammed.
CAUTION : Do not connect the speaker wires to
chassis or car body. Each speaker wire cannot be
soldered together with other wires. Otherwise, the
unit will be damaged and no sound will come out
anymore.
REMOTE CONTROL
INSTALLATION
CAUTION : DO NOT PLACE THE UNIT OVER THE
MAXIMUM INSTALLATION ANGLE OF 30°.
OTHERWISE, THE UNIT MAY NOT WORK
PROPERLY.
WARNING!!
Due to protection of CD Mechanism, two small screws on the top
of the unit must be released before operate the unit. Otherwise, the
CD Mechanism can not be working properly.
UNIT REMOVAL
1. Remove Front Control Panel.
2. Slightly insert the key into the slot and
gently to release.
3. Separate the sleeve from the unit. Keep
release key in a safe place as you may
need for future removal of unit.
P / N : 570-961612-05
Page. 4
P / N : 570-961612-05
Download from Www.Somanuals.com. All Manuals Search And Download.
|