| This product complies with the RoHS Directive (EU 2002/95/EC).   Transistors   2SC3936G   Silicon NPN epitaxial planar type   For high-frequency amplification   ■ Features   ■ Package   • Code   SMini3-F2   • Marking Symbol: K   • Pin Name   1. Base   • Optimum for RF amplification, oscillation, mixing, and IF of   FM/AM radios   • S-Mini type package, allowing downsizing of the equipment   and automatic insertion through the tape packing   2. Emitter   ■ Absolute Maximum Ratings Ta = 25°C   3. Collector   Parameter   Symbol   Rating   Unit   V Collector-base voltage (Emitter open) VCBO   Collector-emitter voltage (Base open) VCEO   Emitter-base voltage (Collector open) VEBO   30   20   V 5 30   V Collector current   IC   PC   Tj   mA   mW   °C   °C   Collector power dissipation   Junction temperature   Storage temperature   150   150   Tstg   −55 to +150   ■ Electrical Characteristics Ta = 25°C 3°C   Parameter   Symbol   VCBO   VCEO   VEBO   hFE   Conditions   Min   30   20   5 Typ   Max   Unit   V Collector-base voltage (Emitter open)   Collector-emitter voltage (Base open)   Emitter-base voltage (Collector open)   Forward current transfer ratio *   Transition frequency   IC = 10 µA, IE = 0   IC = 2 mA, IB = 0   V IE = 10 µA, IC = 0   V VCE = 10 V, IC = 1 mA   70   150   250    fT   VCB = 10 V, IE = −1 mA, f = 200 MHz   VCB = 10 V, IE = −1 mA, f = 10.7 MHz   230   1.3   MHz   pF   Reverse transfer capacitance   (Common emitter)   Cre   Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.   2. : Rank classification   * Rank   B C hFE   70 to 160   110 to 250   Publication date: April 2007   SJC00362AED   Download from Www.Somanuals.com. All Manuals Search And Download.   1 This product complies with the RoHS Directive (EU 2002/95/EC).   2SC3936G   Cob  VCB   bie  gie   bre  gre   1.6   1.2   0.8   0.4   0 12   10   8 0 − 0.5   −1.0   −1.5   −2.0   −2.5   −3.0   f = 0.45 MHz   IE = 0   yie = gie + jbie   yre = gre + jbre   10.7   25   f = 1 MHz   Ta = 25°C   VCE = 10 V   VCE = 10 V   100   58   58   − 0.4 mA   −1 mA   6 25   −2 mA   10.7   4 −4 mA   IE = − 0.1 mA   −1 mA   −2 mA   −4 mA   −7 mA   100   2 IE = −7 mA   f = 0.45 MHz   0 0 4 8 12   16   ( 20   − 0.5 − 0.4 − 0.3 − 0.2 − 0.1   0 ) 1 10   100   ) ( ( ) V Input conductance gie mS   Reverse transfer conductance gre mS   Collector-base voltage VCB   bfe  gfe   boe  goe   1.2   1.0   0.8   0.6   0.4   0.2   0 0 −20   0.45   − 0.4 mA   f = 0.45 MHz   10.7   10.7   −1 mA   25   58   100   100   100   −2 mA   −7 mA   25   −4 mA   58   −4 mA   −2 mA   100   10.7   −40   100   −1 mA   58   58   58   25   IE = −7 mA   − 0.4 mA   −60   IE = − 0.1 mA   25   −80   10.7   −100   −120   yoe = goe + jboe   VCE = 10 V   yfe = gfe + jbfe   VCE = 10 V   f = 0.45 MHz   0.2 0.4   0 0.6   0.8   ( 1.0   0 20   40   60   80   100   ) ( ) Output conductance goe mS   Forward transfer conductance gfe mS   SJC00362AED   3 Download from Www.Somanuals.com. All Manuals Search And Download.   This product complies with the RoHS Directive (EU 2002/95/EC).   SMini3-F2   Unit: mm   2.00 0.20   0.30 +−00..0025   3 1 2 0.13 +−00..0025   (0.65)   (0.65)   1.30 0.10   (5°)   Download from Www.Somanuals.com. All Manuals Search And Download.   Request for your special attention and precautions in using the technical information and   semiconductors described in this book   (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and   regulations of the exporting country, especially, those with regard to security export control, must be observed.   (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples   of the products, and no license is granted under any intellectual property right or other right owned by our company or any other   company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other   company which may arise as a result of the use of technical information described in this book.   (3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office   equipment, communications equipment, measuring instruments and household appliances).   Consult our sales staff in advance for information on the following applications:   – Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support   systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-   ucts may directly jeopardize life or harm the human body.   – Any applications other than the standard applications intended.   (4) The products and product specifications described in this book are subject to change without notice for modification and/or im-   provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product   Standards in advance to make sure that the latest specifications satisfy your requirements.   (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions   (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute   maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any   defect which may arise later in your equipment.   Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure   mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire   or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.   (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,   thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which   damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.   (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita   Electric Industrial Co., Ltd.   Download from Www.Somanuals.com. All Manuals Search And Download.   |