STOPWATCH MODE
FCC STATEMENT
CHRONOMÈTRE NUMÉRIQUE
Model: SL110
To operate stopwatch:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
1. Navigate to stopwatch mode.
2. Press START / STOP to start and stop timer.
MODE D’EMPLOI
SL110
3. Press SPLIT / RESET to reset timer when paused and
FR
to split time measurements while timer is still running.
FIG. 1
WARNING
Changes or modifications not expressly
INTRODUCTION
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
ALARM
Merci d’avoir choisi ce chronomètre (SL110) d’Oregon
ScientificTM. Conservez ce manuel car il contient instructions
et des informations qui peuvent vous être utiles.
1
4
5
To set alarm:
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation.
1. Navigate to Alarm Mode.
2
3
2. Press SPLIT / RESET to select between hour / minute.
VUE D’ENSEMBLE DE L’HORLOGE
FACE AVANT (FIG. 1)
6
3. Press START / STOP to scroll up and set the desired
time. A indicates am and P indicates pm.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
4. Press MODE to return to clock mode.
1. SPLIT / RESET (FRACTURER / REINITIALISER) :
Fracturez / réinitialisez le chronomètre; basculez les
options de réglage
To toggle alarm ON / OFF:
2. Icône du jour de la semaine
3. Icône AM / PM
1. Press SPLIT / RESET to display alarm time in clock
mode.
2. To toggle the alarm ON / OFF press START / STOP
4. MODE: Basculez entre les options
while pressing and holding SPLIT / RESET. When
7
5. START / STOP (COMMENCE / ARRETE): Commencez
activated
indicates alarm is ON.
•
•
Reorient or relocate the receiving antenna.
/ arrêtez le chronomètre; réglez les valeurs
Increase the separation between the equipment and
receiver.
6.
: Indique que l’alarme est activée
To silence alarm:
7. Gardeur de bride
•
Press START / STOP to silence it for 5 minutes.
•
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
OR
•
SEQUENCE DE MODE
Consult the dealer or an experienced radio
technician for help.
/
TV
Press SPLIT / RESET to turn the alarm off. It will re-
DIGITAL STOPWATCH
Model: SL110
activate after 24 hours.
Appuyez MODE pour naviguer entre les modes:
DECLARATION OF CONFORMITY
PRECAUTIONS
USER MANUAL
The following information is not to be used as contact for
support or sales. Please call our customer service number
warranty card for this product) for all inquiries instead.
•
•
•
Do not subject the unit to excessive force, shock, dust,
temperature or humidity.
EN
Mode Horloge
Mode Chronomètre
Do not cover the ventilation holes with any items such as
newspapers, curtains etc.
INTRODUCTION
We
Thank you for selecting this Oregon ScientificTM Stopwatch.
Please keep this manual for instructions and information you
should know about.
Do not immerse the unit in water. If you spill liquid over
it, dry it immediately with a soft, lint-free cloth.
Name:
Oregon Scientific, Inc.
Address:
19861 SW 95th Ave.,
•
•
Do not clean the unit with abrasive or corrosive materials.
Tualatin, Oregon 97062 USA
Do not tamper with the unit ’s internal components. This
invalidates the warranty.
Telephone No.:
1-800-853-8883
Mode de rglage heur / date
Mode d’Alarme
CLOCK OVERVIEW
FRONT VIEW (FIG. 1)
declare that the product
•
•
•
•
Only use fresh batteries. Do not mix new and old
batteries.
Product No.:
Product Name:
Manufacturer:
Address:
SL110
MODE HORLOGE
1. SPLIT / RESET: Split / reset stopwatch; toggle setting
Digital Stopwatch
Images shown in this manual may differ from the actual
display.
options
Appuyez START / STOP pour visualiser la date.
Pour régler l’heur et la date:
IDT Technology Limited
2. Day icon
Block C, 9/F, Kaiser Estate,
Phase 1,41 Man Yue St., Hung
Hom, Kowloon, Hong Kong
When disposing of this product, ensure it is collected
separately for special treatment.
3. AM / PM icon
1. Naviguez jusqu’au mode de réglage heur / date.
4. MODE: Toggle between options
5. START / STOP: Start / stop stopwatch; set values
2. Appuyez START / STOP pour changer les valeurs.
Appuyez et maintenez enfoncé pour rapidement
parcheminer entre les valeurs.
Placement of this product on certain types of wood
may result in damage to its finish for which Oregon
Scientific will not be responsible. Consult the furniture
manufacturer’s care instructions for information.
is in conformity with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1) This device may
not cause harmful interference. 2) This device must accept
any interference received, including interference that may
cause undesired operation.
6.
: Indicates alarm is on
3. Appuyez SPLIT / RESET pour aller jusqu’au prochain
réglage. La séquence des réglages est: réglez les
secondes à zéro, minute, heur / mode horaire 12 / 24,
date, moi / jours de la semaine.
7. Strap Keeper
•
•
The contents of this manual may not be reproduced
without the permission of the manufacturer.
Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.
MODE SEQUENCE
4. Appuyez MODE pour retourner au mode horloge
Press MODE to navigate between modes:
REMARQUE Appuyez et maintenez enfoncé START /
STOP pour parcheminer entre les valeurs horaires et entre
les modes horaires 12 / 24.
•
Please note that some units are equipped with
battery safety strip. Remove the strip from the battery
compartment before first use.
a
Clock Mode
Stopwatch Mode
NOTE The technical specifications for this product and the
contents of the user manual are subject to change without
notice.
MODE CHRONOMETRE
Pour fonctionner le chronomètre:
1. Naviguez jusqu’au mode chronomètre.
SPECIFICATIONS
2. Appuyez START / STOP pour commencer et arrêter le
chronomètre.
TYPE
DESCRIPTION
3. AppuyezSPLIT/RESETpourréinitialiserlechronomètre
quand il est mit sur pause et pour fracturer les mesures
du chronomètre pendant qu’il est toujours en marche.
L x W x H
Weight
60 x 23 x 70 mm (2.4 x 0.9 x 2.8 in)
50 g (1.8 oz)
Time / date setting Mode
Alarm Mode
Clock
HH:MM:SS
CLOCK MODE
MODE ALARME
Hour Format
Calendar
Alarm
12 / 24 hour format
Day / month-date
To view the date press START / STOP.
Pour régler l’alarme:
5-minute snooze function
1 x LR44 1.5V battery
1. Naviguez jusqu’au mode d’alarme.
To set time and date:
2. Appuyez SPLIT / RESET pour sélectionner entre heure
Power
1. Navigate to time / date setting mode.
/ minute.
2. Press START / STOP to set the value. Press and hold to
3. Appuyez START
/
STOP pour parcheminer
quickly scroll through the settings.
ABOUT OREGON SCIENTIFIC
progressivement jusqu’aux réglages désirés. A indique
le matin et P l’après midi.
3. Press SPLIT / RESET to move to the next setting. The
setting sequence is: set seconds to zero, minute, hour /
12 / 24 hour mode, date, month and weekday.
about Oregon Scientific products.
4. Appuyez MODE pour confirmer.
If you’re in the US and would like to contact our Customer
Care department directly, please visit:
www2.oregonscientific.com/service/support.asp
Pour basculer l’alarme sur ON / OFF:
4. Press MODE to return to Clock mode.
1. Appuyez SPLIT / RESET pour afficher l’heure de l’alarme
pendant que vous êtes dans le mode d’horloge.
NOTE Press and hold START / STOP to scroll through hour
settings and 12 / 24 hour formats.
2. Pour mettre l’alarme sur ON / OFF appuyez START /
OR Call 1-800-853-8883.
STOP pendant que vous maintenez enfoncé SPLIT /
RESET. Lorsque l’alarme fut activée
l’alarme est sur ON.
indiquera que
For international inquiries, please visit:
www2.oregonscientific.com/about/international.asp.
Download from Www.Somanuals.com. All Manuals Search And Download.
SL110_M_USA_OP.indd
1
5/8/07 10:12:12 AM
|