Users Manual
PRODUCT WARRANTY
1.
NUMARK INDUSTRIES LLC ( NUMARK ) warrants to the original pur chaser that NUMARK'S produ cts are free from defects in material
and workmanship under normal u se and service for the per iod commencing upon the date of purchase from an autho rized NUMARK
dealer and continuing for the following period of time after that date for (1) Year.
2.
3.
This Limited Warranty is conditioned upon proper use of the product by the purchaser.
This Limited Warranty does n ot cover: (a) defects or damage r esulting from accident, m isuse, abuse, neglect, u nusual physical or
electrical stress, modificat ion of any part of t he product, or cosmeti c damage; (b) equipment that has the serial number removed or
made illegible; (c) all plastic surfaces and ot her externally exposed parts that are scratched or damaged du e to normal use; (d) defects
or damage from improper testing, operation, maintenance, installation, adjustment, or service of the mixers; (e) crossfaders.
4.
5.
During the applicable w arranty period, NUMARK will repair or replace, at N UMARK'S sole discretion, without charge to t he purchaser,
any defective component part of the mixer. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or
components when repairing any product or replace a product with a rebuilt, reconditioned or new product.
THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK
MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR
SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY NUMARK PRODUCT, BREACH OF WARRANTY, OR
NEGLIGENCE, INCLUDING BUT NOT LIMITED TO NUMARK'S OWN NEGLIGENCE, EVEN IF NUMARK OR ITS AGENT HAS BEEN
ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED
WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK'S PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF
THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS
ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT
AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
6.
This Limited Warranty allocates risk of product failure b etween purchaser and NU MARK, and NUMARK'S product pricing r eflects this
allocation of risk and the limitation s of liability contained in this L imited Warranty. The agents, employees, distr ibutors, and dealers of
NUMARK are not authorized to make modifications to this Limited Warranty, or make additional warrantie s binding on NUMARK.
Accordingly, additional statements such as dealer adver tising or presentation, whether oral or written, do not constitute warrantie s by
NUMARK and should not be relied up on. Some jurisdictions do not allow limitations on how long an impl ied warranty lasts, so the
above limitation may not app ly to you. This warranty gives you specific legal rights, and you may also have other rig hts which vary
under local laws.
RETURN INFORMATION
·
A Return Authorization num ber must be obtained fr om your local Numark Representative. For yo ur representative go to
·
·
·
A copy of the original sales receipt must also be included for the equipment to be repaired under warranty.
The faulty equipment must be packed in its original packaging.
One additional outer layer of packaging must be in cluded to ensure product safety. Failures to do so ma y inadequately
protect the equipment in transit and, therefore, jeopardize the customer s warranty.
·
·
Numark will not accept COD shipments and no call tags will be issued for merchandise return.
Numark will not return repair ed merchandise to customers b y priority service, unle ss by written request at t he customer s
cost. Requests must be submitted in writing with merchandise returned.
·
The defective Numark equipment sho uld be sent, FREIGHT PREPAID with Return Authoriz ation number clearly printed on
the outer packaging and original sales receipt enclosed to your local service center
USA
NUMARK INDUSTRIES
Attention: Service Department
11 Helmsman Avenue
North Kingstown, RI 02852 USA
UK
NUMARK INDUSTRIES
Attention: Service Department
Unit:9 The Christy Estate
Ivy Road Aldershot GU12 4TX
England
Phone: +1 (401) 295-9000
Phone: (44) 1252 341 400
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
PARTS DESCRIPTION
Parts Description
CAUTION
Do not open this product by yourself for adjustment.
1
2
If water goes into this product, please turn off the power immediately and
send it to after-sale service department of our company for handling.
One receiver cannot receive signal from two same frequency microphones
simultaneously. Other microphone with different frequency or brand cannot
be used for this receiver.
1. Receiver
Front Panel
3
(3)
(2)
(1) Power LED Indicator
(2) Microphone Signal
LED Indicator
WARNING RISK OF HUMAN HEAVY INJURY OR DEATH
IF USE IMPROPERLY
(1)
(3) Antenna
During Operation
To reduce the risk of fire or electric shock, do not remove the
cover. High voltage parts inside. Submit thisequipment to
Promic dealer for examination, adjustment and repair.
Do Not
Disassemble
Back Panel
Do not put vessel of liquid or small metal parts on the top of this
equipment.
Forbidden
(4) Volume Control
(5) AF Output
To reduce the risk of fire or electric shock, do not let metal or
flammable parts drop into this equipment.
(4) (5) (6) (7)
Forbidden
(6) DC Input
To reduce the risk of shock, do not touch power outlet when it thunders.
(7) Power Switch
Do Not Touch
CAUTION RISK OF HUMAN HEAVY INJURY OR GOODS
DAMAGE IF USE IMPROPERLY
During Setup and Installation
2. Microphone
To reduce the risk of electric shock, do not pull power plug with wet hands.
(1) Power LED Indicator
(2) Power Switch
Forbidden
Forbidden
(1)
(2)
To reduce the risk of fire or electric shock from damaged power
cord, do not pull power cord when pull out the power plug.
Always grasp the plug tightly then pull it out.
(3) Battery Cover
To reduce the risk of fire or electric shock from damaged power cord,
do not move this equipment when the AC power plug is still on.
Pull Out
AC Plug
(3)
To reduce the risk of fire or electric shock, do not expose this
equipment to moisture, dust and sun. Keep away from hot apparatus
or place with oil, smoke and water.
Forbidden
5
2
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES AND SPECIFICATION
USERS GUIDE
Features
Users Guide
1
Insert adapter DC plug into receiver DC input jack, insert the other AC plug
into AC power supply outlet(According to the sign on the back side).
Sound Signal Output Jack: Insert one end of the cable connector plug into
signal output jack at the back of the receiver and the other end of the plug
into KTV or amplifier MIC-IN jack.
1. Frequency Range: VHF 170~250 MHZ.
2. Frequency Stability
3. Modulation(Max):
0.005% quartz oscillation controlled.
30KHZ.
2
4. Frequency Response:50Hz~18KHz 3dB.
5. Hum & Noise:96dB min.
3
4
5
6
Push on receiver s power switch, if power LED indicator on front panel
lights, this indicates that receiver works normally.
6. Dynamic Range:100dB min.
7. Distortion:less than 1%.
Insert attached 9V battery into wireless microphone's battery compartment
(pay attention to the positive and negative pole), and then close the cover.
Turn on microphone power switch, LED indicator will flash once then off ,
it indicates that microphone is ready to use.
Wireless Microphone Features and Specification
1. Antenna:built-in with noise terminator circuit.
2. Battery:DC9V.
At this time receiver's RF LED indicator will light. Adjust volume control
to make receiver s volume to be in normal working state. Finish test of
wireless microphone.
3. Current Consumption:30mA.
4. Power Output:20mW
5. Spurious Emission:45dB min.
Wireless Receiver Features and Specification
1.Quartz controlled fixed frequency receiving mode.
2.Sensitivity: 10dB/uV(S/N 60dB).
3.Image and Spurious Rejection: min 80dB.
4.Output: unbalanced 0.15V 600
.
5.Receiver System: single channel non-diversity.
6.Power Source: DC 12V.
7.Dimensions: (H)220*(W)124*(D)32(MM).
5
4
3
Download from Www.Somanuals.com. All Manuals Search And Download.
|