Step 4: Use the keyboard to enter the password code as
displayed on screen; then press enter.
Step 5: When the keyboard has connected successfully,
the Bluetooth indicator light will turn off.
7. Function Keys
10) Charge time: <2 hours
KBT10 v2
Hold the [Fn] key while selecting the desired special keys.
11) Lithium battery capacity: 180mAh
12) Operating time: Up to 40 hours
13) Lithium battery life: Up to two years
14) Key Strength: 80 +/- 10g
KBT10 Keyboard Case Instruction Sheet
1. Controls
4. Charging the Bluetooth Keyboard (TM1088)
When battery power is running low the power light will begin
to blink indicating that you need to recharge the keyboard.
Step 1: Attach the long USB cable (included with this
keyboard) to the short transfer cable (included with the
tablet).
15) Working temperature: -10 - +55 C
Slide switch to turn keyboard off or on.
10. Safety Precaution
1) Keep the keyboard away from sharp objects.
2) Do not place heavy objects on the keyboard.
3) Do not expose the keyboard to microwaves.
4) Do not apply undue force or pressure on the keyboard.
5) Keep keyboard away from oil, chemicals or any other organic
liquids.
6) Warning: This product may contain a chemical known to
the State of California to cause cancer, birth defects, or other
reproductive harm.
Press the Bluetooth connect button to establish wireless
keyboard connection with tablet PC.
2. Keyboard Indicator Lamp (TM1088)
Step 2: Connect the long USB cable to the keyboard’s USB
port and the other end to the tablet.
NOTE: Tablet must be powered on to charge the keyboard.
If battery level on the tablet is low, plug in AC power adapter
to recharge.
Battery Status Light: Slide the OFF/ON button to ON.
The power light will illuminate for 3 seconds. The keyboard
will remain on although the light will disappear.
Bluetooth Status Light: Press the “Connect” button and the
Bluetooth status light will be flash. This indicator light will
stay on until the keyboard connects to your device.
TABLET
11. Cleaning
Clean the keyboard with water, diluted alcohol or light cleaning
solution.
Caps Lock Indicator: Indicator lamp is lit when the
keyboard is set to uppercase text mode.
8. Product Features:
1) Bluetooth wireless keyboard
2) Protective leather case with integrated kickstand
3) Micro USB interface for easy recharging
4) Long lasting, built-in rechargeable lithium battery
5) Light weight, quiet keystrokes, water-proof, dust-proof design
6) Energy saving sleep mode
12. Troubleshooting
Charging Light: When the keyboard is charging, the
charging indicator illuminates red. When fully charged,
the red indicator will turn off.
A. Unable to Connect
1) Make sure the keyboard is on (the power indicator ON).
2) Make sure the keyboard is in within the proper operating
distance of 30 feet.
5. Battery
The long-lasting lithium ion rechargeable battery will provide
many hours of service with no “memory effect”. So the battery
can be recharged at any time. We recommend that you turn the
keyboard off during long periods of inactivity.
3. Connecting the Keyboard to the Tablet (TM1088)
Step 1: Turn the power toggle switch to the ON position.
The indicator light will stay on for about five second then will
turn off.
3) Make sure the battery is recharging properly (the power
indicator is red when keyboard is connected to power).
4) Make sure the Bluetooth setting on the tablet PC is on.
5) Press the key “Connect” to establish Bluetooth connection.
B. Unable to Charge Keyboard
9. Keyboard Specification
1) Bluetooth interface standard
2) Operating distance up to 30 feet
3) Modulation system: GFSK
4) Operation voltage: 3.0-5.0v
5) Operating current: <2.5mA
6) Standby current: <0.3mA
7) Sleep current: <40uA
6. Energy Saving Sleep Mode
Step 2: Press the Connect button. The Bluetooth indicator light
will blink. The keyboard is now ready to connect to the tablet
computer.
Step 3: On the tablet, select SETTINGS > Bluetooth > ON.
The tablet will automatically search for Bluetooth compatible
devices. When the Bluetooth Keyboard is recognized, tap or
click to connect.
The keyboard automatically enters an idle, or sleep mode, when
it is inactive for 15 minutes. At that time, the keyboard power will
turn off. To resume normal operation, or wake up the keyboard
from sleep mode, press any key and wait about three seconds
for the keyboard to reset.
1) Make sure the USB power cable is connected properly
to the keyboard and the power source.
2) Make sure the wall charger is plug into the power
outlet. NOTE: The output voltage and current of the
power adapter cannot exceed DC5.0V, 500mA or it
may damage the keyboard.
8) Charge current: =>200mA
9) Standby time: >40 days
Download from Www.Somanuals.com. All Manuals Search And Download.
|