Model No. NTSY9896.0
Serial No.
USER’S MANUAL
Write the serial number in the
space above for future reference.
Serial Number Decal (under seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-825-2588
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the resistance system.
1. Read all instructions in this manual and all
warnings on the resistance system before
using the resistance system. Use the resist-
ance system only as described in this
manual.
8. Always wear athletic shoes for foot protec-
tion while exercising.
9. The resistance system is designed to support
a maximum user weight of 300 pounds (136
kg).
2. It is the responsibility of the owner to ensure
that all users of the resistance system are
adequately informed of all precautions.
10. Make sure that the cables remain on the pul-
leys at all times. If the cables bind while you
are exercising, stop immediately and make
sure that the cables are on the pulleys.
3. The resistance system is intended for home
use only. Do not use the resistance system in
any commercial, rental, or institutional set-
ting.
Replace all cables at least every two years.
11. Always stand on the base plate when per-
forming an exercise that could cause the
resistance system to tip.
4. Keep the resistance system indoors, away
from moisture and dust. Place the resistance
system on a level surface, with a mat beneath 12. Use the resistance system only with the
it to protect the floor or carpet. Make sure
that there is enough clearance around the
resistance system to mount, dismount, and
use it.
included resistance. Do not use the resist-
ance system with any other type of weight to
add resistance.
13. Always make sure that the pins and knobs
are fully engaged before using the resist-
ance system.
5. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from the resistance system at all times.
14. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
7. Keep hands and feet away from moving parts.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile NordicTrack® PT3
WITH FREEMOTION TECHNOLOGY resistance sys-
after reading this manual, please see the front cover of
this manual. To help us assist you, note the product
tem. The resistance system offers a selection of weight model number and serial number before contacting us.
stations designed to develop every major muscle group The model number is NTSY9896.0. The serial number
of the body. Whether your goal is to tone your body,
build dramatic muscle size and strength, or improve
your cardiovascular system, the resistance system will
help you to achieve the specific results you want.
can be found on a decal attached to the resistance
system (see the front cover of this manual).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
For your benefit, read this manual carefully before
using the resistance system. If you have questions
ASSEMBLED DIMENSIONS:
Height: 85 in. (216 cm)
Width: 75 in. (191 cm)
Depth: 61 in. (155 cm)
Arm
Handle
Cable
Console
Adjustment Handle
Backrest
Adjustment Knob
Gas Shock
Shock Cover
Seat
Right Side
Left Base Cover
Base Leg
Left Side
Base Plate
Ankle Strap
Note: The terms “right side” and “left side” are determined relative to a person sitting on the
seat; they do not correspond to right and left on the drawings in the manual.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST on page 18. Note: Some small parts may have been preat-
tached. If a part is not in the parts bag, check to see if it has been preattached.
M5 Large
Washer (63)
M6 Large
Washer (61)
M6 Washer
(82)
M4 x 12mm
Self-tapping
Screw (77)
M6 x 20mm
Screw (67)
M6 x 80mm Button
Screw (68)
M10 x 20mm
Button Screw (59)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Make Assembly Easier
Everything in this manual is designed to ensure
that the resistance system can be assembled
successfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
• As you assemble the resistance system, make
sure that all parts are oriented as shown in the
drawings.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
Before beginning assembly, carefully read the
following information and instructions:
The included hex keys
and the following
tools (not included) may be required for assembly:
• Assembly requires two persons.
• Two adjustable wrenches
• One Phillips screwdriver
• Because of its weight and size, the resistance
system should be assembled in the location
where it will be used. Make sure that there is
enough clearance to walk around the resistance
system as you assemble it.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1.
1
Before beginning assembly, make sure
Washers
Screws
that you understand the information in
the box above. For help identifying small
parts, see the PART IDENTIFICATION
CHART on page 5.
See the inset drawing. Remove the indicated
packing screws and washers and all packing
materials; do not dispose of the packing
materials until assembly is completed.
2
Insert the two Base Legs (2) into the Base (1)
as far as possible. With the help of a second
person, carefully tip the resistance system onto
its left or right side.
77
63
Attach one of the Base Legs (2) to the Base (1)
with two M10 x 20mm Button Screws (59); do
not tighten the Button Screws yet.
20
1
Attach the Left Base Cover (20) to the Base (1)
with an M4 x 12mm Self-tapping Screw (77)
and an M5 Large Washer (63).
59
2
Repeat this step on the other side of the
resistance system.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Attach the Base Plate (3) to the Base Legs (2)
with eight M6 x 20mm Screws (67) and eight M6
Large Washers (61).
2
See step 1. Tighten the M10 x 20mm Button
Screws (59).
2
Carefully tip the resistance system back into the
operating position.
61
67
2
61
3
61
67
67
3. Have a second person hold the Backrest (23)
near the Base (1). Connect the 4-pin Counter
Wire Harness (39) to the 4-pin Console Wire
Harness (41). Next, connect the 3-pin Wire
Harness (42) to the 3-pin wire harness extend-
ing from the Backrest. Carefully push the wire
harnesses into the Base.
3
33
68
82
39
41
Attach the Backrest (23) to the Base (1) with
three M6 x 80mm Button Screws (68) and three
M6 Washers (82).
23
42
Press the Upright Cap (33) into the top of the
Base (1).
68
1
82
4. Make sure that all parts are properly tight-
ened. The use of the remaining parts will be
explained in ADJUSTMENT, beginning on the
following page.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENT
This section explains how to adjust the resistance system. Properly tighten all parts each time you use the resist-
ance system. Replace any worn parts immediately. To clean the resistance system, use a damp cloth and a mild,
non-abrasive detergent; do not use solvents to clean the resistance system.
ADJUSTING THE SEAT
The Seat (24) can be attached at either of two
heights. To raise or lower the Seat (24), lift it off the
pins on the Base (1) and set it on a different set of
pins. For exercises that do not require the Seat,
remove the Seat and set it out of the way.
24
Pins
1
ATTACHING THE HANDLES
To attach a Handle (37), first attach a Weight Clip
(49) to the Cable (38). Then, attach the Handle to
the Weight Clip. Attach the other Handle (37) in the
same way.
37
38
49
37
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE RESISTANCE
To increase the resistance, first squeeze the
Adjustment Handle (12). Next, lift the end of the
Adjustment Handle and move it away from the
Backrest (23). When the Adjustment Handle is in
the desired position, release it. Push the
12
23
Adjustment Handle forward or backward slightly
to make sure that it is fully engaged.
To decrease the resistance, first squeeze the
Adjustment Handle (12). Next, push down on the
end of the Adjustment Handle and move it toward
the Backrest (23). When the Adjustment Handle is
in the desired position, release it. Push the
Adjustment Handle forward or backward slightly
to make sure that it is fully engaged.
ADJUSTING THE ARMS
To adjust the Left or Right Arm (6 or 7), first hold
the Arm with one hand and pull the Adjustment
Knob (34). Move the Arm to the desired position,
and reengage the Adjustment Knob into the
Adjustment Plate (11).
7
WARNING:
Make sure that the
Adjustment Knob (34) is fully engaged in the
Adjustment Plate (11) before you exercise.
6
34
TIGHTENING THE CABLE
11
To tighten the Cable (38), first move the Left Arm (6)
and the Right Arm (not shown) to the highest posi-
tion. Next, adjust the resistance to 310 pounds.
Locate the end of the Cable that has cable clamps,
and pull that end of the Cable until you feel resist-
ance. Measure the distance between the cable
cover and the Left Arm.
6
38
Next, adjust the resistance to the minimum setting.
Have a second person pull the Cable (38) and hold
it. Slide the cable cover off the cable clamps, and
loosen the two screws in the cable clamps. Next,
pull the Cable through the indicated link and the
cable clamps to shorten the Cable by the measured
amount. Then, tighten the two screws and slide the
cable cover onto the cable clamps.
Measure
Distance
Cable
Cover
Screws
Cable
Clamp
38
Cable
Link
Cover
Cable
Clamp
WARNING:
Fully tighten the two
screws before you exercise.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE OPERATION
The console also offers five target muscle workouts
that help you work specific areas of the body. The
voice of a personal trainer will guide you through each
target muscle exercise.
In addition, the console features four build and tone
workouts for the upper and lower body. During each
build and tone workout, the voice of a personal trainer
will prompt you to perform a series of strength exercis-
es.
The console also features the new iFIT Interactive
Workout System. The iFIT Interactive Workout System
enables the console to accept iFIT Cards containing
workout programs designed to help you achieve specif-
ic fitness goals. One demo iFIT Card is included.
Additional iFIT Cards are available separately. To pur-
chase iFIT Cards, go to www.iFIT.com or call the
telephone number on the front cover of this manu-
al. iFIT Cards are also available at select stores.
AUDIO
DISPLAY
To use the manual mode of the console, follow the
steps beginning on page 11. To use a daily workout,
see page 12. To use a target muscle workout, see
page 13. To use a build and tone workout, see page
14. To use an iFIT workout, see page 15.
FEATURES OF THE CONSOLE
The revolutionary console offers an array of features
designed to make your workouts more effective.
When you use the manual mode of the console, you
can enter the numbers of sets and reps that you plan
to complete and set a length of time to rest between
sets. As you perform strength exercises, the console
will track your progress according to the settings you
enter.
HOW TO PLUG IN THE TRANSFORMER
Plug the indicated
end of the trans-
former into the jack
in the resistance
system. Plug the
other end of the
The console also features two interactive workout rou-
tines, each with five daily workouts designed to help
you build and tone your muscles. During each daily
workout, the voice of a personal trainer will prompt you transformer into a
to perform a variety of strength exercises while guiding 120-volt outlet. The
Jack
Transformer
you through an effective strength-training workout.
console display will
light and a tone will
sound; the console will then be ready for use.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Perform exercises.
HOW TO USE THE MANUAL MODE
Perform repetitions of the exercise of your choice
with a slow, steady motion. The voice of the con-
sole and the display will count the repetitions as
you perform them. At the end of a set, rest for the
amount of time shown in the display. Then,
resume performing repetitions and sets as indicat-
ed in the display.
Note: If there is a sheet of clear plastic on the face of
the console, remove the plastic.
1. Touch the screen or press the ON/RESET
button to turn on the console.
When you turn on the console, the display will
light. A tone will then sound and the main menu
will appear on the screen (see the drawing on
page 10).
If desired, touch the BACK button to return to the
manual mode screen. Touch the MAIN MENU but-
ton to return to the main menu.
If desired, touch the AUDIO button in the lower
right corner of the screen and see HOW TO
ADJUST THE AUDIO SETTINGS on page 16 to
adjust the audio settings.
5. Follow your progress with the display.
As you exercise, the upper section of the display
will show the current set and the total number of
sets to be performed.
If desired, touch the DISPLAY button in the lower
left corner of the screen and see HOW TO
ADJUST THE DISPLAY SETTINGS on page 16 to
adjust the display settings.
The lower section of the display will show the cur-
rent rep and the total number of reps to be per-
formed in each set. Note: The cables must move
at least 12 inches (30 cm) for repetitions to be
counted by the console.
2. Select the manual mode.
When the main menu appears on the screen,
touch the MANUAL button to select the manual
mode.
The lower left section of the display will also show
the rest period and count down the time remaining
in the rest period.
3. Enter workout settings.
6. Continue entering workout settings and
performing exercises as desired.
After you select the manual mode, the manual
mode screen will appear. You can now enter the
following workout settings:
When the workout is finished, the manual mode
screen will appear. See steps 3 and 4 above and
continue entering workout settings and performing
exercises as desired.
Sets–Touch the SETS
UP/DOWN buttons to
enter the desired num-
ber of sets. You can
enter 1 to 25 sets.
3
SETS:
REPS:
REST:
When you are finished exercising in the manual
mode, touch the BACK button or press the
ON/RESET button to return to the main menu.
12
Reps–Touch the REPS
UP/DOWN buttons to
enter the desired num-
ber of reps (repeti-
tions). You can enter 1
to 25 reps.
0:30
7. When you are finished exercising, the console
will turn off automatically.
OK
If the cables do not move, the screen is not
touched, and the buttons are not pressed for a few
minutes, the console will turn off and the display
will be reset.
Rest–Touch the REST
UP/DOWN buttons to
Note: When the demo mode is turned on (see
HOW TO ADJUST THE DISPLAY SETTINGS on
page 16), the console will enter the demo mode
after sitting idle for five minutes. The screen will
then show an animation. To exit the demo mode,
touch the screen or press the ON/RESET button.
adjust the rest period between sets. The setting will
change in increments of 5 seconds. The rest period
can be from 5 seconds to 4 minutes long.
Touch the OK button to save your settings and con-
tinue with the workout. If desired, touch the BACK
button to return to the main menu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Begin the daily workout.
HOW TO USE A DAILY WORKOUT
When you select a daily workout, the voice of a
personal trainer will begin explaining the first exer-
cise. The name of the exercise and an animation of
the exercise will then appear on the screen. Touch
the READY button at any time during the explana-
tion to begin the exercise.
1. Touch the screen or press the ON/RESET
button to turn on the console.
See step 1 on page 11.
2. Select a male or female workout routine.
Perform repetitions of the exercise as described by
the personal trainer. Exercise with a slow, steady
motion. The personal trainer and the display will
count the repetitions as you perform them. At the
end of a set, rest for the amount of time shown in
the display. Then, resume performing repetitions
and sets as indicated in the display.
Touch the MALE DAILY WORKOUT button to
select a workout routine designed for men. Touch
the FEMALE DAILY WORKOUT button to select a
workout routine designed for women.
3. Select a daily workout.
If desired, touch the BACK button to return to the
exercise explanation. Touch the FORWARD button
to skip to the next exercise. Touch the MAIN MENU
button to return to the main menu.
Each workout routine
consists of five different
workouts to be per-
MONDAY
formed on different
days of the week. To
select a daily workout,
TUESDAY
5. Continue the daily workout.
THURSDAY
touch the name of the
desired workout on the
screen.
FRIDAY
When you have completed the first exercise, the
personal trainer will explain the next exercise in
the workout and then guide you through the next
exercise.
SATURDAY
MAIN MENU
If desired, touch the
BACK button or the
MAIN MENU button to
return to the main
The program will continue until the last exercise in
the workout is completed. The words WORKOUT
COMPLETE will then appear on the screen.
menu. Touch the
AUDIO button to change the audio settings.
If desired, press the ON/RESET button to return to
the main menu.
Note: The voice of a personal trainer will guide you
through the workout. To adjust the volume or select
an audio setting for your personal trainer, touch the
AUDIO button and see HOW TO ADJUST THE
AUDIO SETTINGS on page 16. During the workout,
you can touch the AUDIO button and change the
audio settings any time the AUDIO button appears
on a screen.
6. Follow your progress with the display.
See step 5 on page 11.
7. When you are finished exercising, the console
will turn off automatically.
See step 7 on page 11.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Perform the target exercise.
HOW TO USE A TARGET MUSCLE WORKOUT
When you select a target exercise, the voice of a
personal trainer will begin explaining the exercise.
The name of the exercise and an animation of the
exercise will then appear on the screen. Touch the
READY button at any time during the explanation
to begin the exercise. If desired, touch the BACK
button to return to the target exercise menu.
1. Touch the screen or press the ON/RESET
button to turn on the console.
See step 1 on page 11.
2. Access the target muscle workout menu.
Touch the TARGET MUSCLE button to access the
target muscle workout menu.
Perform repetitions of the exercise as described by
the personal trainer. Exercise with a slow, steady
motion. The personal trainer and the display will
count the repetitions as you perform them. At the
end of a set, rest for the amount of time shown in
the display. Then, resume performing repetitions
and sets as indicated in the display.
3. Select the desired target muscle workout.
The target muscle
workout menu allows
you to choose among
five target muscle work-
outs. To select a target
muscle workout, touch
the name of the desired
workout on the screen.
If desired, touch the BACK button to return to the
exercise explanation. Touch the FORWARD button
to return to the target exercise menu. Touch the
MAIN MENU button to return to the main menu.
6. Continue the target muscle workout.
If desired, touch the
BACK button or the
MAIN MENU button to
return to the main
When you have performed a target exercise, the
name of that exercise will appear crossed out on
the target exercise menu.
menu. Touch the
AUDIO button to
change the audio settings.
Continue selecting and performing target exercises
as described in steps 4 and 5 above.
Note: The voice of a personal trainer will guide you
through the workout. To adjust the volume or select
an audio setting for your personal trainer, touch the
AUDIO button and see HOW TO ADJUST THE
AUDIO SETTINGS on page 16. During the workout,
you can touch the AUDIO button and change the
audio settings any time the AUDIO button appears
on a screen.
When you have performed all the target exercises
in a target muscle workout, the words WORKOUT
COMPLETE will appear on the screen.
If desired, press the ON/RESET button to return to
the main menu.
Note: If you touch the BACK button or the MAIN
MENU button to return to the target muscle work-
out menu or the main menu at any time during a
target muscle workout, the console will be reset
and the record of target exercises you have com-
pleted will be lost.
4. Select the desired target exercise.
When you select a target muscle workout, a target
exercise menu will appear on the screen. To select
a target exercise, touch the name of the desired
target exercise on the screen. If necessary, touch
the SCROLL UP/DOWN buttons or press the up
and down buttons next to the iFIT slot to view all
the target exercises on the menu.
7. Follow your progress with the display.
See step 5 on page 11.
8. When you are finished exercising, the console
will turn off automatically.
If desired, touch the BACK button to return to the
target muscle workout menu. Touch the MAIN
MENU button to return to the main menu. Touch
the AUDIO button to change the audio settings.
See step 7 on page 11.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Begin the build and tone workout.
HOW TO USE A BUILD AND TONE WORKOUT
When you select a build and tone workout, the
voice of a personal trainer will begin explaining the
first exercise. The name of the exercise and an ani-
mation of the exercise will then appear on the
screen. Touch the READY button at any time dur-
ing the explanation to begin the exercise.
1. Touch the screen or press the ON/RESET
button to turn on the console.
See step 1 on page 11.
2. Access the build and tone workout menu.
Perform repetitions of the exercise as described by
the personal trainer. Exercise with a slow, steady
motion. The personal trainer and the display will
count the repetitions as you perform them. At the
end of a set, rest for the amount of time shown in
the display. Then, resume performing repetitions
and sets as indicated in the display.
Touch the BUILD & TONE button to access the
build and tone workout menu.
3. Select the desired build and tone workout.
The build and tone
workout menu allows
you to choose among
two upper body and two
lower body workouts. To
If desired, touch the BACK button to return to the
exercise explanation. Touch the FORWARD button
to skip to the next exercise. Touch the MAIN MENU
button to return to the main menu.
BUILD UPPER BODY
BUILD LOWER BODY
select a build and tone
TONE UPPER BODY
workout, touch the
TONE LOWER BODY
name of the desired
workout on the screen.
5. Continue the build and tone workout.
When you have completed the first exercise, the
personal trainer will explain the next exercise in
the workout and then guide you through the exer-
cise.
If desired, touch the
BACK button or the
MAIN MENU button to
return to the main
menu. Touch the
AUDIO button to change the audio settings.
The program will continue in this way until the last
exercise in the workout is completed. The words
WORKOUT COMPLETE will then appear on the
screen.
Note: The voice of a personal trainer will guide you
through the workout. To adjust the volume or select
an audio setting for your personal trainer, touch the
AUDIO button and see HOW TO ADJUST THE
AUDIO SETTINGS on page 16. During the workout,
you can touch the AUDIO button and change the
audio settings any time the AUDIO button appears
on a screen.
6. Follow your progress with the display.
See step 5 on page 11.
7. When you are finished exercising, the console
will turn off automatically.
See step 7 on page 11.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Next, select the desired workout on the iFIT Card
by touching the name of the workout on the
screen.
HOW TO USE AN IFIT WORKOUT
1. Touch the screen or press the ON/RESET
button to turn on the console.
A moment after you select a workout, the voice of
a personal trainer will begin guiding you through
your workout. iFIT workouts function in the same
way as build and tone workouts. To use the iFIT
workout, see steps 3 to 7 on page 14.
See step 1 on page 11.
2. Insert an iFIT Card and select a program.
To use an iFIT workout, insert an iFIT Card into
the iFIT slot; make sure that the iFIT Card is ori-
ented so the metal contacts are face-down and are
facing the slot. When the iFIT Card is properly
inserted, the indicator next to the slot will light and
an iFIT menu will appear on the screen.
iFIT Slot
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ADJUST THE DISPLAY SETTINGS
HOW TO ADJUST THE AUDIO SETTINGS
When you touch the DISPLAY button on a screen,
you will access the display settings screen. The dis-
play settings screen allows you to make the following
display adjustments:
When you touch the AUDIO button on a screen, you
will access the audio settings screen. The audio set-
tings screen allows you to make the following audio
adjustments:
LCD Contrast–To
Personal Trainer
adjust the LCD contrast
for the screen, touch
the LCD CONTRAST
UP/DOWN buttons. To
Audio Setting–Touch
the PERSONAL
TRAINER check box to
toggle the voice of the
FULL
personal trainer on and
INSTRUCTIONS
PERSONAL
TRAINER
restore the default con-
DEFAULT
trast setting, touch the
DEFAULT button.
off.
When a check mark
appears in the PER-
DEMO
OK
OK
Note: It is possible to
LIGHT
adjust the contrast
SONAL TRAINER
check box, the voice of
the personal trainer will
guide you through a
workout with basic
instructions.
beyond viewable limits.
If this occurs, simply
touch the DEFAULT
button and restore the
default contrast setting.
Demo Mode–Touch the DEMO MODE check box
to toggle the demo mode on and off. The demo
mode is turned on when a check mark appears in
the check box.
When no check mark appears in the PERSONAL
TRAINER check box, the voice of the personal
trainer will be turned off.
Full Instructions Audio Setting–Touch the FULL
INSTRUCTIONS check box to toggle the detailed
personal trainer instructions on and off.
When the demo mode is turned on, the console will
enter the demo mode after sitting idle for five min-
utes. The screen will then show an animation. To
exit the demo mode, touch the screen or press the
ON/RESET button.
When check marks appear in both the FULL
INSTRUCTIONS and PERSONAL TRAINER
check boxes, the voice of the personal trainer will
guide you through a workout with detailed instruc-
tions.
LCD Backlight–Touch the LIGHT check box to
toggle the LCD backlight on and off. The LCD
backlight is turned on when a check mark appears
in the check box.
Volume–To adjust the volume level, touch the vol-
ume bar to move the indicator to the desired vol-
ume level.
Touch the OK button to save the LCD contrast and
demo mode settings and exit the display settings
screen. Note: The LCD backlight setting will not be
saved in memory for the next time you turn on the
console.
Touch the OK button to save the audio settings and
exit the audio settings screen.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
STRENGTH TRAINING GUIDELINES
PERSONALIZING YOUR EXERCISE PROGRAM
Staying Motivated—For motivation, keep a record of
each workout. List the date, the exercises performed,
the resistance used, and the numbers of sets and
repetitions completed. Record your weight and key
body measurements at the end of every month.
Determining the proper length of time for each work-
out and the numbers of repetitions or sets to complete
is an individual matter. Avoid overdoing it during the
first few months of your exercise program. Progress
at your own pace, and be sensitive to your body’s sig-
nals. If you experience pain or dizziness while exer-
cising, stop immediately and begin cooling down. Find
out what is wrong before continuing.
THE BASIC TYPES OF STRENGTH WORKOUTS
Note: See the accompanying DVD to learn the correct
form for a variety of exercises that can be performed
with the resistance system.
Remember that adequate rest and a proper diet are
important factors in any exercise program.
Muscle Building—To increase the size and strength
of your muscles, push them close to their maximum
capacity. Your muscles will continually adapt and grow
as you progressively increase the intensity of your
exercise.
Warming Up—Begin each workout with 5 to 10 min-
utes of stretching and light exercise to warm up.
Warming up prepares your body for more strenuous
exercise by increasing circulation, raising your body
temperature, and delivering more oxygen to your
muscles.
Begin with 3 sets of 8 repetitions for each exercise you
perform. Rest for 3 minutes after each set. When you
can complete 3 sets of 12 repetitions without difficulty,
increase the amount of resistance.
Working Out—Each workout should include 6 to 10
different exercises. Select exercises for every major
muscle group, emphasizing areas that you want to
develop most. To give balance and variety to your
workouts, vary the exercises from workout to workout.
Toning—You can tone your muscles by pushing them
to a moderate percentage of their capacity. Select a
moderate amount of resistance and increase the num-
ber of repetitions in each set. Complete as many sets
of 15 to 20 repetitions as possible without discomfort.
Rest for 1 minute after each set. Work your muscles
by completing more sets rather than by using high
amounts of resistance.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Exercise Form—Maintaining proper form is an
essential part of an effective exercise program. This
requires moving through the full range of motion for
each exercise, and moving only the appropriate parts
of the body. Exercising in an uncontrolled manner will
leave you feeling exhausted.
Weight Loss—To lose weight, use a low amount of
resistance and increase the number of repetitions in
each set. Exercise for 20 to 30 minutes, resting for a
maximum of 30 seconds between sets.
Cross Training—Cross training is an efficient way to
get a complete and well-balanced fitness program. An
example of a balanced program follows:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or using an exercise cycle, on
Tuesday and Thursday.
The repetitions in each set should be performed
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
during the return stroke. Never hold your breath.
• Rest from both strength training and aerobic exer-
cise for at least one full day each week to give your
body time to regenerate.
Cooling Down—End each workout with 5 to 10 min-
utes of stretching. Include stretches for both your arms
and legs. Ease into each stretch gradually and go only
as far as you can without strain. Move slowly as you
stretch and do not bounce. Stretching at the end of
each workout is an effective way to increase flexibility.
The combination of strength training and aerobic exer-
cise will reshape and strengthen your body and devel-
op your heart and lungs.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. NTSY9896.0
R0307A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
1
2
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
2
2
2
7
4
1
2
1
1
2
1
1
1
1
1
4
4
4
2
1
Base
Base Leg
Base Plate
16mm Spacer
Seat Frame
Left Arm
Right Arm
Adjustment Arm
Gas Shock
Shock Cover
Adjustment Plate
Adjustment Handle
Handle Bracket
Left Handle Cover
Right Handle Cover
Left Adjustment Arm Cover
Right Adjustment Arm Cover
Left Rear Cover
Left Front Cover
Left Base Cover
Right Base Cover
Console
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
2
2
1
1
1
1
1
1
2
1
4
8
1
10
1
6
1
4
1
8
3
2
2
1
4
4
4
6
2
13
4
4
4
6
3
2
5
13
2
1
4
2
-
Arm Cap
Weight Clip
Left Retainer Clip
Right Rear Cover
Right Front Cover
Backrest Plate
Seat Plate
Counter Bracket
9
M10 x 88mm Button Bolt
M10 x 67mm Button Bolt
M10 x 52mm Button Bolt
M10 x 20mm Button Screw
M10 x 95mm Bolt
M6 Large Washer
M10 x 71mm Bolt
M5 Large Washer
Right Retainer Clip
M10 x 47mm Bolt
M5 x 55mm Bolt
M6 x 20mm Screw
M6 x 80mm Button Screw
M6 x 35mm Button Bolt
M6 x 18mm Button Bolt
M4 x 20mm Self-tapping Screw
M6 x 25mm Screw
M6 x 50mm Self-tapping Screw
M6 x 40mm Self-tapping Screw
M4 x 25mm Self-tapping Screw
M4 x 22mm Self-tapping Screw
M4 x 12mm Self-tapping Screw
M5 x 30mm Self-tapping Screw
M5 x 20mm Self-tapping Screw
Large Washer
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Backrest
Seat
Seat Frame Cap
64mm Round Inner Cap
Base Foot
Left Pulley Cover
Right Pulley Cover
115mm Pulley
90mm Pulley
70mm Pulley
Upright Cap
Adjustment Knob
Magnet
Ankle Strap
M10 Washer
M6 Washer
M5 Washer
M4 Washer
M10 Nylon Locknut
M6 Nylon Locknut
M5 Nylon Locknut
Snap Ring
M3 x 8mm Self-tapping Screw
User’s Manual
Handle
Cable
4-pin Counter Wire Harness
Transformer
4-pin Console Wire Harness
3-pin Wire Harness
Arm Bushing
Pulley Bushing
Barrel Nut
Pivot Pulley Bearing
Handle Spring
*
*
*
*
-
-
-
Exercise Guide
Hex Key
Grease Packet
Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. NTSY9896.0
R0307A
38
58
12
81
29
57
17
47
15
64
81
46
37
30
28
38
86
66
14
37
11
83
39
55
35
89
76
71
81
85
69
45
50
36
79
88
75
31
81
77
7
48
73
13
8
33 68
82
85
51
16
4
62
59
59
85
85
83
42
18
87
80
44
85
41
19
24
43
52
6
32
58
74
68
40
43
85
54
31
82
85
34
44
80
65
1
31
27
84
77
25
65
5
78
56
75
85
77
72
72
2
61
27
67
65
84
75
53
22
84
77
59
77
26
27
84
75
23
61
59
61
3
67
70
61
61
2
67
27
84
9
77
63
77
70
26
63
75
9
63
77
63
10
49
10
77
63
85
77
63
21
60
20
19
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to give
the following information:
• the MODEL NUMBER of the product (NTSY9896.0)
• the NAME of the product (NordicTrack PT3 WITH FREEMOTION TECHNOLOGY resistance system)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on
pages 18 and 19)
LIMITED WARRANTY
WHAT IS COVERED—The entire NordicTrack resistance system (“Product”) is warranted to be free of all defects in material and
workmanship.
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
HOW LONG IS IT COVERED—ICON Health & Fitness, Inc. (“ICON”), warrants the frame for five years after the date of purchase.
ICON warrants all other parts for one year. Labor is covered for one year.
WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or component, pro-
viding the repairs are authorized by ICON first and are performed by an ICON trained and authorized service provider, or, at our
option, we will replace the Product.
WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper
assembly or installation, alterations, modifications without our written authorization or by failure on your part to use, operate, and
maintain as set out in your User’s Manual (“Manual”).
WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the Product as spec-
ified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of the defect; as instruct-
ed, return any defected part for replacement or, if necessary, the entire product, for repair.
USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to do the
periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.
HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-888-825-2588 and tell them your name
and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary, arrange for serv-
ice where your Product is located or advise you how to ship the Product for service. Before shipping, always obtain a Return
Authorization Number (RA No.) from our Customer Service Department; securely pack your Product (save the original shipping car-
ton if possible); put the RA No. on the outside of the carton and insure the product. Include a letter explaining the product or prob-
lem and a copy of your proof of purchase if you believe the service is covered by warranty.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or per-
formance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoy-
ment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the
exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness
for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how
long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty. This warranty gives you specific legal rights and
you may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 248458 R0307A
Printed in China © 2007 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|