Nokia Automobile Accessories Nokia 3660 User Manual
SUPPORT GUIDE FOR  
WAP ACCESS POINT SETTINGS IN  
NOKIA 3660 IMAGING PHONE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. INTRODUCTION  
To obtain access to WAP services  
•
•
•
•
You must be within the coverage of a network which supports data calls,  
A data service must be activated on your SIM card,  
You must have obtained a WAP access point from a WAP service provider, and  
You must have entered the proper WAP settings.  
Before you can use WAP services, you need to configure your WAP access point settings.  
The exact values for the WAP access point settings are available from your WAP service  
provider. Follow the instructions carefully. You can use this information to define and edit the  
settings manually.  
Also, your service provider may be able to send all or some of the required settings to you  
via a special short message called an Over The Air (OTA) message. Once you have  
received and saved the settings, you can start using the WAP application or edit the settings  
as described below.  
Note: To be able to use High speed data (refers to HSCSD [High Speed Circuit  
Switched Data]) or GPRS (General Packet Radio Service), the network service  
provider has to support these features and, if necessary, to activate them on your  
SIM card. When using High speed or GPRS, extra charges may apply. Check with  
your network service provider for further details and availability.  
Note: The necessary settings for WAP configuration are available from your WAP  
Service Provider. Depending on your service provider, you may not need to fill in  
all of the settings.  
2. HOW TO CREATE A NEW WAP ACCESS POINT  
1. Open the Services application  
2. Press the Options button and select Settings.  
3. Highlight Default access point and press the Scroll key.  
You will get a pop-up “No access points defined. Define  
now?" Press Yes. If there is an access point already  
defined, the list of WAP access points is opened. Select the  
access point you want to modify and press Options and  
select Edit. If you want to create a new access point press  
Options and New access point.  
1/7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To enter information to fields such as user name or password  
press Options and Change. All fields marked with are  
*
mandatory fields.  
4. Enter the name of the connection (e.g. service provider’s  
name)  
5. Define in the Data bearer field what kind of connection type  
you are using. Options are GPRS, GSM data and High  
speed GSM.  
2.1 USING GSM DATA OR HIGH SPEED ACCESS  
POINT  
1. Type the service provider dial-up number in the next  
field.  
2. Move the focus to User name and press the scroll key.  
Enter your user name and press Ok.  
3. Set Password prompt to Yes if you want to type in your  
password every time you log in. Select No to save your  
password in your Nokia 3660 phone and automate the  
login procedure. If you are using one-time passwords ,  
select Yes.  
4. Enter your password in Password field and press Ok.  
Tip: If your password contain numbers you can easily insert them with long key  
press  
5. In Authentication options you can select Secure if your Dial-up server needs  
encrypted authentication on connection. Otherwise, select Normal  
6. Type your service provider Gateway IP address in the next field.  
Note: If the access point does not have a WAP gateway address, it does not  
show in the access point list in WAP settings.  
2/7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7. Data Call type. GSM network operator and ISP (Internet  
Service Provider) support different connection types. For  
details contact your ISP and network provider. ISDN  
connections are preferable to analogue connections  
because they offer considerably faster data call  
establishment (often about twenty seconds faster than  
with analogue connections), and offer higher data  
transfer speeds because the connection is digital from  
end to end. On the other hand, if you have problems  
establishing a data call (for example, when roaming  
outside your home network), using analog connections  
may help you to establish a connection.  
8. Set the Maximum data speed. Different, higher  
connection speeds are available with different combinations of High speed settings.  
Higher data rates may cost more, depending on the network service provider. The  
speed indicated here is the maximum speed that may be used. The true data transfer  
speed depends on the congestion in the Internet, the type of data you are  
downloading, whether you are running other applications on the Nokia 3660 phone,  
the congestion in the mobile phone network, on your location in the mobile phone  
network and other circumstances. In poor reception areas, a significantly lower  
transmission speed may be used by the network  
HSCSD Analogue  
ISDN V.110/ISDN  
V.120 speed options  
9. From Connection secure you can set the encrypted connection setting to on or off.  
10. The last field is Session mode. Options are Permanent or Temporary.  
3/7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.2 USING A GPRS ACCESS POINT  
11. Type a name for the access point  
12. Move the focus to User name setting and press the  
scroll key. Type your user name and press Ok.  
13. Set Password prompt to Yes if you want to type in  
your password every time you log in. Select No to save  
your password in your Nokia 3660 phone and automate  
the login procedure. If you are using one-time  
passwords (e.g. you get connection password from time  
and user identification based application in phone),  
select Yes.  
14. Type your password to Password field and press Ok.  
Tip: If your password contains numbers, you can easily insert them with a long  
key press  
15. In Authentication options you can select Secure if your Dial-up server needs  
encrypted authentication on connection. If not, select Normal  
16. Type the Gateway IP address of your service provider in the next field.  
Note: If the access point does not have a WAP gateway address, it does not  
show in access point list in WAP settings.  
17. Enter your service provider homepage address in the Homepage field. This address  
will also be the first on your bookmark list.  
18. From Connection secure you can set the encrypted connection setting to on or off.  
19. The last field is Session mode. Options are Permanent or Temporary.  
2.3 ADVANCED SETTINGS  
If your service provider requires fixed IP address or DNS  
address (Domain Name Server) you also must enter them in  
the settings on the Nokia 3660 phone. To enter these settings  
press Options and select Advanced settings.  
1. If your service provider uses a fixed IP address you can  
enter it in the Phone IP address field. If you are using a  
Dynamic IP address and you have entered an IP value in  
this field by accident, enter 0.0.0.0 to Phone IP address.  
This will clear the incorrect IP address. Dynamic IP address  
may also be called a Floating IP address.  
2. Enter the Primary name server and Secondary name  
server addresses in the next two fields. Your service  
provider may call these servers DNS (Domain name server).  
4/7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. If your connection uses a proxy server, type your proxy server address in the Server  
address field and proxy server port number in the Port number field.  
Note: When using GPRS as a data bearer, the following options are not available.  
4. If your service provider is using Call back, select Yes in the Call back field.  
This option allows a server to call you back once you have made the initial call and may  
enable cost savings. Contact your ISP for further information and availability of this service.  
5. Callback type options are use server no and use other no.  
6. If you selected Use other no, type in your Callback number. This number can be, for  
example, the data call phone number (not the voice number) of your SIM card. This is  
used when using callback protocol in a mode where the client specifies the number to  
call back  
Congratulations. You have now made a new WAP access point to your Nokia 3660 phone.  
Press Back as many times as it is needed to get back to WAP browser.  
5/7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. CONFIGURING A WAP ACCESS POINT WITH PC SUITE  
You can enter the same settings to your Nokia 3660 phone by using the Settings Wizard in  
the PC Suite for Nokia 3660.  
1. Connect your Nokia 3660 phone to your PC via Bluetooth or infrared and open PC  
Suite for Nokia 3660.  
2. Select Settings Wizard from the toolbar on the left-hand side.  
3. Press the Next button  
4. Select Change Phone Settings Manually and press the Next button.  
5. Select Remote connections and press the Next button.  
6. Select Add a New Remote connection and press the Next button.  
7. If you already have a Remote connection defined on your Nokia 3660 phone, you will  
get an option to Copy existing Remote connection or Create new one from  
scratch.  
6/7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8. Select Data bearer for the new connection and press the Next button. Fill your  
connection settings such as phone numbers, username and password to the  
following pages.  
9. When the account is ready, press the Finish button to send the access point to your  
Nokia 3660 phone.  
You have now set up a WAP access point.  
7/7  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miller Electric Welding System Big Blue 400P User Manual
MTD Lawn Mower ZT 42 User Manual
National Rice Cooker SR W06N User Manual
Nexus 21 Work Light CS4500 610 User Manual
Omnimount TV Mount OM1100275 User Manual
Omron Video Game Controller C20K User Manual
Onkyo DVD Player DV L55 User Manual
Oricom Amplified Phone TP30 User Manual
Packard Bell Computer Drive 5800 User Manual
Panasonic Cordless Drill EY6450 U1 User Manual