PSS-300
Portable Sound System
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Congratulations on your choice of a portable sound system —
you have purchased one of the finest portable sound systems on
the market today. This unit was developed using the expertise of
professional sound engineers and working musicians. You will find
that your new NADY AUDIO portable sound systems has superior
performance and greater flexibility than any other portable sound
systems in its price range. Please read this manual carefully to get the
most out of your new unit.
Thanks for selecting NADY AUDIO as your choice in portable sound systems.
USINGTHIS MANUAL
This booklet provides information regarding the use of the PSS-300
portable sound system. It includes detailed instructions, description of
features and step-by-step guides to operating. This should answer any
questions about the operation and servicing of this system.
3
nady.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM FEATURES
PSS-300 PORTABLE SOUND SYSTEM
•
Ultra compact portable PA system with 2 speakers and detachable 8-channel
powered mixer
•
Lightweight (21 lbs) for easy transport and set up. Speakers are pole mountable on
optional SPST-1A speaker stands (with included adapters). Mixer mic stand mountable
(with included adapter).
•
•
•
Dual 150W Class D amplifier, with built in peak limiter
Full range 8” woofers and 1” titanium high-frequency drivers
XLR mic, ¼” line (with mic / line switches), and stereo RCA inputs. All inputs with 2
band EQ, reverb, and level controls, L/R stereo and monitor outputs.
Rear storage compartment for cables and accessories
•
SAFETYTIPS & WARNINGS:
1. When using this electronic device, basic precautions should always be taken, including
the following: read all instructions before using the product.
2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a
wet basement, or near a swimming pool, etc.).
3. This product should be used only with a cart or stand that will keep it level and stable
and prevent wobbling.
4. This product, in combination with headphones or speakers, may be capable of
producing sound levels that could cause permanent hearing loss. Do not operate for a
long period of time at a high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should consult an audiologist.
5. The product should be positioned so that proper ventilation is maintained.
6. The product should be located away from heat sources such as radiators, heat vents,
or other devices (including amplifiers) that produce heat.
7. The product should be connected to a power supply only of the type described in the
operating instructions or as marked on the product.
8. The power supply cord should: (1) be undamaged, (2) never share an outlet or
extension cord with other devices so that the outlet’s or extension cord’s power rating
is exceeded, and (3) never be left plugged into the outlet when not being used for
a long period of time.
9. Care should be taken so that objects do not fall into, and liquids are not spilled
through, the enclosure’s openings.
10. The product should be serviced by qualified service personnel if:
a. The power supply cord or the plug has been damaged.
b. Objects have fallen into, or liquid has been spilled onto the product.
c. The product has been exposed to rain.
d. The product does not appear to operate normally or exhibits a marked
change in performance.
e. The product has been dropped, or the enclosure damaged.
11. Do not attempt to service the product beyond what is described in the user
maintenance instructions. All other servicing should be referred to qualified
service personnel.
4
Nady Systems Inc. – PSS-300 Portable Sound System
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
To ensure years of enjoyment from your NADY AUDIO PSS-300 Portable
Sound System, please read and understand this manual thoroughly before
using the unit.
1. INSPECTION
Your NADY AUDIO PSS-300 Portable Sound System was carefully packed at the factory in
packaging designed to protect the units in shipment. Before installing and using your unit,
carefully examine the packaging and all contents for any signs of physical damage that may
have occurred in transit.
[Please note: Nady Systems is not responsible for shipping damage. If your unit is dam-
aged, do not return to NADY, but notify your dealer and the shipping company (if shipped to
you) immediately to make a claim. Such claims must be made by the consignee in a timely
manner.]
CONTENTS:
•
•
•
•
•
•
•
PSS-300 Mixer Section (with mic stand adapter)
PSS-300 Left Speaker (with pole mount adapter)
PSS-300 Right Speaker (with pole mount adapter)
(2x) 2 18’ Speaker Cables
AC cord
Instruction Manual
Warranty Card
2. SETUP
After transporting the PSS-300 to the desired location, stand the unit upright so that the
feet of the speaker are down on an even surface. Unscrew and carefully remove the ampli-
fier from the back of the speaker if desired and place on a flat surface. Unscrew the acces-
sory panel of the 2nd speaker to retrieve the included speaker and power cables. Replace
the accessory panel and tighten screw until secure.
Mixer Section
Position the PSS-300 mixer section on its flat surface, or use the included mic stand
adapter to mount to an optional mic stand, with the control panel facing up. Parts of the
unit can become very warm during use. This is normal during operation. Care should be
taken to ensure that there is enough space behind the Mixer Section for cooling. Also,
do not place the Portable Sound System on high temperature devices such as power
amplifiers, etc., or the unit may overheat in operation.
Although the PSS-300 is shielded against radio frequency (RF) and electromagnetic
interference (EMI), extremely high fields ofRF and EMI should be avoided.
Please make sure that the power is rated properly for the required voltage (110VAC/60 Hz).
Power requirements for electrical equipment differ from area to area. In new installations
and portable sound systems, or any situation in which the AC power is in question, it is
wise to confirm the voltage before connecting it to power sources.
Europe (except UK): 230V, 50Hz UK and Australia: 240V, 50Hz USA and Canada: 120V, 60 Hz
For other areas, please check with local authorities.
5
nady.com
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Speakers and Stands
If using the optional SPST-1A, fully extend the speaker stand tripod legs and tighten
the base screw. Extend the pole of the stand to the desired height and insert the safety
pin completely through the stand hole above the pole thumbscrew. Lower the pole so
that the pin rests on the holder and tighten the pole thumbscrew. Attach the included
speaker stands to the bottom of the speakers and tighten with included bolts until
completely secure.
Setup the stands on a flat surface where the speakers will be located and not disturbed.
Place the speakers on the stands and position them as desired, and tighten the included
bolt on the speaker mount until secured to the pole. Note: facing the speakers towards any
of the microphones connected with the PSS-300 will increase the chance of feedback.
Connect the speaker cables to the input jacks on the lower left front panel of both the Left
and Right speakers. Connect the other end of each cable to the corresponding Left and
Right speaker outputs on the rear panel of the PSS-300 mixer section. Position the length
of the cables so they will not be a safety hazard to people.
WARNING: Connect only the supplied speakers to the PSS-300. Never connect additional
passive speakers to the PSS-300.
Inputs
Connect all sound sources to the appropriate inputs i.e., microphones, keyboards,
CD players, karaoke machines.
When ready to operate, plug the AC cord into the power source. Make sure that the unit
is turned off before connecting to the AC power source to avoid possible loud transients,
which can damage your speakers or your ears. Before turning on, connect up the speakers
and all inputs and outputs desired and turn down the Master Volume.
6
Nady Systems Inc. – PSS-300 Portable Sound System
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
7
nady.com
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL CONTROLS & CONNECTIONS
1. CHANNEL 1-4 XLR / ¼” INPUT - The XLR mic inputs are an electronically balanced XLR type
designed to accept mic level signals from any balanced or unbalanced low impedance (Low Z)
microphone. The XLR jacks are configured for: Pin1 = ground, Pin2 = positive (+), Pin3 = negative
(-).The 1/4” mono line inputs are designed to accept unbalanced line level signals such as those
from keyboards, drum machines, or samplers.
2. CHANNEL 5/6 STEREO ¼” / RCA INPUTS - TheTS ¼” or stereo RCA line level inputs can be
used for connecting CD players, Tape Decks, and other audio equipment with line level outputs.
3. CHANNEL 7/8 STEREO RCA INPUTS - The stereo RCA line level inputs can be used for connect
ing CD players, Tape Decks,and other audio equipment with line level outputs.
4. REVERB SWITCH - The REVERB switch can be used to add an effect to the mic or line input on
any of the inputs 1-4. Once engaged, the green LED next to each REVERB switch will illuminate,
indicating the REVERB is ON.
5. TREBLE CONTROL - Turn to the right to boost high frequencies, adding crispness too percussion
from drum machines, cymbals and synths. Turn to the left to cut these frequencies, reducing sibi
lance or hiss. The control has a shelving response giving +/-10dB of boost or cut at 10kHz.
6. BASS CONTROL - The bass control shelving response gives 10dB of boost or cut at 100Hz. Add
warmthtovocalsorextrapunchtoguitars,drumsandsynthsbyturningtotheright.Turntotheleft
to reduce stage rumble, hum or to improve a mushy sound.
7. CHANNEL FADER - The channel faders determine the output signal level to the Master Mix bus.
They offer a smooth logarithmic taper more often associated with much more expensive console
for optimum control of the signal.
8. MASTER FADER - The master fader determines the output signal level of the Master Mix bus.
They offer a smooth logarithmic taper more often associated with much more expensive console
for optimum control of the signal.
9. REVERB CONTROL KNOB - The REVERB control knob is used to adjust the amount of reverb
added to all channels that have the REVERB switch engaged.
10. MONITORVOLUME KNOB - The monitor volume knob controls the output level of the line and
stereo RCA record out. Note that the monitor out (11) is intended to be used with powered speak
ers or other devices that require no additional (wattage) power.
11. MONITOR OUT - There are 2 ¼”TS connectors that can be used to connect to powered speakers
or any device not requiring additional (wattage) power.
12. REC OUT - The REC OUT stereo RCA outputs can be used to connect to an external recording
device and is controlled by the (7) individual channel faders. Note that it is important to monitor
and set the input of your recording device prior to recording to ensure no clipping of the signal
during the process.
13. SPEAKER OUT - The PSS-300 has two ¼”TS connectors, which are powered outputs used to
connect your left and right speakers. Use the included speaker cables to connect the speakers
CAUTION: The total impediance load for each side of the amplifier must not be less than 6 Ohms.
Do not connect additional speakers to the PSS-300 unless using (9) monitor out section (please
read above for more details).
14. POWER/PEAKINDICATOR-ThePOWERLEDwillilluminateGreenwhenthemainpowerswitch
is turned on, and the red light will indicate the amplifier is near the clipping point. If the Peak
indicator is consistently light up, turn down the MASTER volume or the individual channel faders
until the indicator light does not flash consistently.
15. POWER SWITCH - Use the power switch to turn the PSS-300 on or off.
16. SPEECH / MUSIC SWITCH - The SPEECH/MUSIC switch is used to change the overall tone and
frequency response of the PSS-300. If the PSS-300 is used for a music application, engage the
switch for music-optimized settings, and disengage the switch for speech-optimized applications.
17. IEC INLET - Connect the supplied heavy gauge 3-pin IEC power cable here.
18. MIXER LOCKS - To release the mixer from the speaker, turn the mixer locks counter-clockwise
When transporting the PSS-300, make sure the mixer locks are tightly secured.
8
Nady Systems Inc. – PSS-300 Portable Sound System
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL CONTROLS & CONNECTIONS
2
3
13 12 11
1
17
15
8
5
10
14
6
4
9
16
18
8
7
9
nady.com
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
OUTPUT POWER:
150W per side into 6 Ω load
OVERLOAD PROTECTION AMA™: Servo system limits the power amplifier input to
(Automatic Maximum Amplitude)
FREQUENCY RESPONSE:
TONE CONTROLS:
INPUT IMPEDANCE:
MAX GAIN:
prevent clipping distortion that can damage speakers
40Hz to 20KHz at 1 watt / 1meter
Bass: 100 Hz 10 dB;Treble: 10 KHz 10 dB
Mic input: 2 K Ω, Line input: 12 K Ω
86 dB mic input to speaker output
Less than 0.8%THD at rated output
DSP digital reverb
DISTORTION:
REVERB:
SPEAKERS:
8” woofer and piezoelectric horn tweeter
110 VAC (60 Hz)
AC POWER:
DIMENSIONS:
Speaker(s) 18 ¼” x 10 ¾” x 9 ¾” (47.35 x 27.3 x 24.76 cm)
Mixer: 11 ½” x 6” x 3 ½” (29.21 x 15.24 x 8.9 cm)
WEIGHT:
21.1 lbs (9.53 kg) assembled
SERVICE
(U.S.) Should your Nady PSS-300 require either warranty or non-warranty service, please
contact the Nady Service Department via phone at (510) 652-2411 or e-mail at service@
nady.com for a Return Authorization (R/A) number and a service quote (if out of warranty).
Make sure the R/A number is clearly marked on the outside of the package and cashier’s
check or money order is enclosed (if not under warranty or prepaid with a credit card).
Include a brief description of the problems you are having and, if under warranty, a proof of
date and place of purchase (i.e., photocopy of bill of sales), and ship prepaid to:
Nady Systems Inc.
Service Department
6701 Shellmound Street
Emeryville, CA 94608
For service outside the U.S. (International) please contact the Nady distributor in your
country through the dealer from whom you purchased this product.
DO NOT ATTEMPTTO SERVICETHIS UNITYOURSELF AS IT CAN BE
DANGEROUS AND ALSOVOIDTHEWARRANTY
10
Nady Systems Inc. – PSS-300 Portable Sound System
Download from Www.Somanuals.com. All Manuals Search And Download.
ONE YEAR LIMITED WARRANTY
Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects
in material or workmanship for a period of one year from the date of original retail purchase. If any such
defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of
charge, subject to verification of the defect or malfunction upon return
to Nady Systems. Please do not return your Nady product to the store
where it was purchased as Nady Systems handles your warranty ser-
vice directly. Communication with our Service Department is the most
efficient means of servicing your unit and we are dedicated to keeping
you a satisfied customer.
To the extent permitted by law, any applicable implied warranties,
including warranties of merchantability and fitness are hereby limited
to one year from the date of purchase. Consequential or incidental
damages resulting from a breach of any applicable express or implied
warranties are hereby excluded. This warranty is in lieu of all other
agreements and warranties, general or special, express or implied and no representative or
person including a Nady dealer, agent, or employee is authorized to assume for us any other liability in
connection with the sale or use of this Nady Systems’ product.
Whereas some states do not allow limitations on how long implied warranties last, and do not allow
exclusion of incidental or consequential damages, the above limitations and exclusions may not apply
to you. This warranty gives you specific legal rights and you may also have other rights which may vary
from state to state.
This warranty is subject to the following conditions:
1)This system must have been purchased from an authorized Nady dealer and all warranty
service must be performed by Nady’s service department. Any service not performed by Nady will
automatically void this warranty.
2) Items not covered: physical damage resulting from improper handling of the unit in transit from the
factory by the shipper (Nady Systems is not responsible for such damage and all such claims must be
made against the shipping company by the consignee); defects caused by normal wear of the product
(expendable parts are typically connectors, cables, potentiometers, switches and similar components);
damage or defects caused by abuse, neglect, accident, failure to connect or operate the unit in any way
that does not comply with applicable technical or safety regulations, or improper repair, excessive heat
or humidity, alteration or unreasonable use of the unit, causing cracks, broken cases/housings or parts;
finish or appearance items; items damaged in shipment en route to Nady Systems, Inc. for repair. The
warranty is null and void if any Nady serial number has been removed or defaced.
11
nady.com
Download from Www.Somanuals.com. All Manuals Search And Download.
NADY SYSTEMS, INC • Emeryville,CA, USA • nady.com
PSS-300 Portable Sound System
Download from Www.Somanuals.com. All Manuals Search And Download.
|