Miele Washer w 304 plus User Manual

Operating instructions

for Washing machine

W 304 Plus

To avoid the risk of accidents or

damage to the machine it is

essential to read these operating instructions

before it is installed or used for the

first time.

M.-Nr. 06 020 350

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Disposal of your old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Description of the applianc e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Special programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Delicates and Silks / programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Water plus system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Important control panel features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Programme selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Additional option buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

"Spin" button with indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Before using for the first tim e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Washing environmentally and economically . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

How to wash correctl y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Before washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Additional option s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2

At the end of a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 25

Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Altering a programme once selected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Skipping a programme stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

To c ancel or select a different programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Fabric conditioners and liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Automatic dispensing of fabric conditioner or liquid starch to laundry

at the end of a programm e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 0

Adding fabric conditioner separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Adding starch separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Colour run and dye removers/dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

E-Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Extra cleanin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1

Cleaning the detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Cleaning the fluff (drain) filter and pum p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3

Cleaning the water inlet filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

To c lean the filter in the union in the open end of the inlet hose: . . . . . . . . . . . 35

To c lean the filter in the water inlet valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

The programme does not start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

The wash programme stops and a fault indicator light comes on. . . . . . . . . . . . . 37

A fault indicator light comes on but the wash programme continues as normal. . 38

General problems or an unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . 39

The drum door does not open when you press the Door button. . . . . . . . . . . . . . 41

Opening the drum door in the event of a power failur e . . . . . . . . . . . . . . . . . . . . . 4 2

Customer contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Installing the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Removing the transit fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Screwing out and adjusting the fee t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 9

Building under a continuous worktop/in a kitchen run . . . . . . . . . . . . . . . . . . . 50

Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

The Miele water protection system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Connection to the water suppl y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2

Connection to the drainage syste m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3

Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Programmable functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Water plus system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

T o p-up rinse for

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Memory function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Soa k . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

the data plate (fusing, voltage and

Read the operating instructions be-

fore using this machine for the first

time. They contain important infor-

mation about the safety, use and

maintenance of the machine. This

way you will avoid the risk of acci-

dents and damage to the machine.

Keep these operating instructions in

a safe place and ensure that new

users are familiar with the content.

Pass them on to any future owner of

the machine.

frequency) match the mains electricity

supply. If in any doubt, consult a

qualified electrician.

The electrical safety of this appli-

ance can only be guaranteed when

continuity is complete between the ma-

chine and an effective earthing system

which complies with local and national

regulations. It is most important that this

basic safety requirement is present and

regularly tested and where there is any

doubt the household wiring system

should be inspected by a qualified

electrician.

Correct usage

The manufacturer cannot be held liable

for the consequences of an inadequate

earthing system (e.g. electric shock).

Only use the washing machine to

wash items which are specified by

the manufacturer to be machine-wash-

able on the wash-care label, and tex-

tiles composed of hand-washable wool

or wool blend fabrics as well as satin,

lace, silk and other hand-washable

garments.

Any other applications may be danger-

ous. The manufacturer is not liable for

damage resulting from improper use or

operation.

Do not connect the appliance to

the mains electricity supply by an

extension lead. Extension leads do not

guarantee the required safety of the

appliance (e.g. danger of overheating).

The machine is built in accordance

with current safety requirements.

Unauthorised repairs could result in un-

foreseen dangers for the user, for which

the manufacturer cannot accept liability.

Repairs should only be undertaken by a

Miele approved technician.

Ensure current is not supplied to the

appliance while maintenance or repair

work is being carried out.

This appliance is not a toy! To

avoid the risk or injury do not allow

children to play on or near it or to play

with the controls. Supervise its use by

the elderly or infirm.

Technical safety

The machine is only completely

isolated from the electricity supply

when:

Before setting up the machine,

check it for any externally visible

damage. Do not install and use a

damaged machine.

– it is switched off at the wall socket

and the plug is withdrawn, or

Before connecting the machine,

ensure that the connection data on

– it is switched off at the mains, or

– the mains fuse is withdrawn.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

This machine must only be

connected to the on-site water

Do not install your washing

machine in rooms where

supply using a new hose kit. Old hoses temperatures below freezing may

must not be re-used. Check the hose

regularly for signs of wear and tear.

occur. Frozen hoses may burst under

pressure. The reliability of the electronic

Change in good time to avoid the risk of control unit may be impaired at

leaks and subsequent damage.

temperatures below freezing point.

Faulty components must only be

replaced by genuine Miele original

spare parts. Only when these parts are

fitted can the safety standards of the

machine be guaranteed.

Before using the machine for the

first time, check that the transit

fitting at the rear of the machine has

been removed (see section on

"Installation"). During spinning, a transit

fitting which is still in place may result in

damage to both the machine and

adjacent furniture or appliances.

If the connection cable is faulty it

must only be replaced by a Miele

approved service technician to protect

the user from danger.

Turn off the stopcock if the

machine is to be left for any length

of time (e.g. holiday), especially if there

is no floor drain (gully) in the immediate

vicinity.

In countries where there are areas

which may be subject to infestation

by cockroaches or other vermin, pay

particular attention to keeping the

appliance and its surroundings in a

clean condition at all times. Any

Flooding danger.

If hooking the drain hose into a

wash basin, check that the water can

damage which may be caused by

cockroaches or other vermin will not be drain off quickly enough to prevent the

covered by the appliance guarantee.

sink from overflowing.

Make sure the drain hose is secure, so

that the force of the water flowing out of

the hose does not dislodge it.

Use

This equipment is not designed for

maritime use or for use in mobile

installations such as caravans, aircraft

etc. However it may be suitable for

such usage subject to a risk

assessment of the installation being

carried out by a suitably qualified

engineer.

Otherwise this will result in flooding.

Take care to ensure that foreign

objects (e.g. nails, pins, coins,

paper clips) do not find their way into

the machine with the laundry. These

may damage components of the

machine (e.g. suds container, drum),

which in turn can result in damage to

the laundry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

If the correct amount of detergent

is dispensed, the machine should

For machines with a ‘porthole’

door, remember that the porthole

glass will be hot when washing at very

high temperatures. Do not let children

touch it.

not need to be descaled. If, however,

you do wish to descale the machine

only use proprietary non-corrosive

descaling agents and strictly observe

the instructions on the packaging. If in

doubt, contact the Miele Customer Ser-

vice Dept. or your Miele Dealer.

Always make sure the drum is

stationary before reaching in to

remove washing. Reaching into a

moving drum is extremely dangerous.

Textiles which have been

pre-treated in solvent based

cleaning agents must be thoroughly

rinsed in clean water before being

washed in the machine.

Accessories

Accessory parts may only be fitted

when expressly approved by Miele.

If other parts are used, guarantee,

performance and product liability

claims will be invalidated.

Never use solvent based cleaning

agents in this machine, as this may

result in damage to component parts

and create toxic fumes. Such

detergents also pose a fire and

explosion hazard.

Disposal of your old machine

Before discarding an old machine,

switch it off at the wall socket and

unplug it. Render the plug useless. Cut

off the cable directly behind the

appliance to prevent misuse. This

should be done by a competent

person.

Only use dyes specified by the

manufacturer as being suitable for

use in a domestic washing machine.

Always observe the manufacturer's

instructions carefully.

Colour run and dye removers

contain sulphur compounds which

can cause damage such as corrosion.

Do not use these products in this

machine.

The manufacturer cannot be held

liable for damage caused by

non-compliance with these Warning

and Safety instructions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of the appliance

Special programmes

Delicates and Silks / programmes

– Programme for hand-washable

In these programmes the laundry is

washed and spun very gently to reduce

creasing and the amount of ironing

required, thus providing "Easy care" for

your laundry.

fabrics (Silks /)

Hand-washable fabrics which crease

easily but do not contain wool can be

washed in the Silks / programme

(30°C temperature only).

Water plus system

– Programme for hand-washable

The water level for washing and rinsing

is increased. For Cottons programmes

an additional rinse can also be

selected.

fabrics (Woollens /)

Hand-washable or

machine-washable wool or wool

blend fabrics can be washed in the

Woollens / programme. If the

garment care label does not specify

a temperature, wash using the cold

setting.

– Programme for small loads

(Quick wash)

This is a Cottons programme for very

lightly soiled fabrics.

– Programme for mixed fabrics

(Mixed wash)

Suitable for small loads of garments

made from man-made fibres and

cotton garments which can be

washed together. Sort according to

colour.

– Rinse programme (Separate rinse)

Articles are only rinsed and spun in

the machine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of the appliance

Future updates (PC)

The indicator or check light marked PC

allows a service engineer to update

your machine in future years.

When, for example, new programmes

are developed or new fabrics are

introduced, a service engineer will be

able to modify existing programme

cycles accordingly.

Miele will provide information when

such possibilities become available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of the appliance

Control panel

aStart button

fProgramme sequence indicator

lights

starts the wash programme

show which section of the wash

programme has been reached.

bAdditional option buttons

Additional options can be added to

the basic programme.

gCheck lights

Use the top button to select either

the Short, the Pre-wash or the Soak

option. Use the lower button to select

the Water plus option.

Indicator light on = option selected

Indicator light off = option not

selected

hI-On/0-Off button

for switching the machine on or off or

interrupting a programme

iDoor button

opens the machine door

cIndicator lights

for spin speeds, Rinse hold or

Without spin

dSpin button

for selecting the final spin speed,

Rinse hold or Without spin

eProgramme selector

for selecting the wash programme

and temperature for that programme.

The programme selector can be

turned clockwise or anti-clockwise.

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of the appliance

Important control panel

features

Select the spin speed.

Press the "Spin" button to select a

different spin speed. However, you

cannot select a spin speed higher than

the maximum allowed for the basic

wash programme chosen.

Programme selector

The programme selector is used to set

the basic wash programme and the

temperature for that programme.

The indicator lights show the speed

selected.

Additional option buttons

You can also omit the final spin

^ Press the "Spin" button to reach:

– Rinse hold

Additional options can be added to the

basic programme.

Use the top button to select either the

Short, the Pre-wash or the Soak option.

The laundry is not spun and remains

suspended in the final rinse water.

This reduces creasing if the laundry

is not going to be removed from the

drum immediately after the end of

the programme.

To continue the programme select a

spin speed. When the programme is

finished the Anti-crease/Finish light

will come on. Turn the programme

selector to the Finish position and

press the door button to open the

door and remove the laundry.

Use the lower button to select the Water

plus option.

The indicator light will come on to show

that the additional option has been

selected.

If an additional option is chosen, which

is incompatible with the basic

programme, it cannot be selected.

"Spin" button with indicator lights

The maximum spin speed which can be

selected depends on the basic

programme chosen.

– Without spin

The laundry is not spun after the final

rinse. After the water has been

drained away the machine goes

straight into the anti-crease stage.

Spinning between the rinses is also

omitted in this setting (rinse and

interim spin).

Maximum

spin

Basic programme

speed

1300 Cottons, Quick wash, Drain/spin,

Starch

1200 Woollens, Separate rinse

900 Minimum iron, Mixed wash

600 Delicates

400 Silks

Download from Www.Somanuals.com. All Manuals Search And Download.

Before using for the first time

Before using the machine for the first

time ensure that it is correctly

installed and connected. See the

relevant section under "Installation".

Also check that the fluff filter is

securely tightened. Otherwise there

is a risk of water leakage during use.

For safety reasons spinning is not

possible until the machine has been

prepared for using for the first time. To

activate the spinning function you must

run a wash programme without laundry

and without detergent.

Using detergent could result in an

excessive build-up of foam.

This also activates the ball valve. The

ball valve prevents detergent escaping

from the suds container into the sump

during a wash programme, thus making

maximum use of the detergent.

^ Turn on the stopcock.

^ Press the I-On/0-Off button in.

^ Turn the programme selector to

Cottons 40°C.

^ Press the "Spin" button repeatedly to

select Without spin.

^ Press Start.

When this programme has finished turn

the programme selector to Finish. Your

washing machine is ready for using for

the first time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing environmentally and economically

– Water consumption and energy

usage are determined by the size of

the load. Load to the maximum

recommended for the programme

selected.

– Use the Short wash option for

normally or very lightly soiled

laundry.

– Do not exceed the amount of

detergent recommended by the

manufacturer on the packaging.

– To save energy wash normally and

lightly soiled laundry at lower

– Reduce the amounts of detergent

with smaller loads, (e.g. with a half

load, approx. one third less

detergent).

temperatures. The 95°C Cottons

programme is probably only needed

in exceptional circumstances, e.g.

for oil based stains or where a very

hot wash is required.

– Select the highest suitable spin

speed in the wash programme when

tumble drying afterwards.

– Use the Mixed wash or the Quick

wash programme for smaller

amounts of laundry.

– Load recognition and automatic

rinsing can cause the duration of a

programme to vary greatly. The main

wash may be shortened and a rinse

cycle omitted depending on the

amount of laundry.

– A main wash (programme without

pre-wash) is sufficient for cleaning

normally soiled laundry.

– By using the additional option Soak

for heavily soiled laundry you can

select a lower temperature in the

main wash.

– Use the additional option Soak

instead of Pre-wash with heavily

soiled laundry.

If Soak is followed immediately by a

main wash the same suds are used.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Brief instructions

See the "Programme chart" in the next

section for information on which

programmes to use for different fabric

types.

Please note:

To help familiarise yourself with how to

use your washing machine please read

the sections "Before washing",

"Selecting a programme" and "At the

end of a programme" in detail.

ASort the laundry into colours and

fabric types

Selecting a programme:

BSwitch on the washing machine

COpen the drum door

DLoad the drum

EClose the drum door

FSelect a programme

GSelect a spin speed

HSelect any additional option required

IAdd detergent

JPress the Start button

At the end of a programme:

KOpen the drum door

LRemove the laundry

MSwitch off the washing machine

NTurn the programme selector to the

Finish position

OClose the drum door

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Programme chart

Cottons 30°C to 95°C 9ö876

Fabric

Cottons and linen fabrics, e.g. bed linen, table linen,

towelling, jeans, underwear, T-shirts, nappies.

Additional options Short, Pre-wash, Soak, Water plus

Notes

– Only use the Cottons 95°C programme for heavily soiled

and incontinent laundry.

– For heavily soiled laundry and/or soiling which has been

left unwashed for some time, select the Soak additional

option.

– For laundry with large amounts of dirt (e.g. dust, sand)

use the Pre-wash additional option.

– For lightly soiled laundry select the Short additional

option.

– For dark coloured fabrics use a detergent for coloured

fabrics, or liquid detergent.

Detergent

max. load

Powder detergent, detergent for coloured fabrics, liquid

detergent, tablet detergent and liquid tab detergent. See

also "Detergent" section.

5 kg

Note for test institutes:

Programme setting for testing according to EN 60456 standard: Cottons 60°C

Minimum iron 30°C to 60°C 4321 876

Fabric

For garments made of synthetic fibres, mixed fibres and for

easy care cotton shirts and blouses.

Additional options Short, Pre-wash, Soak, Water plus

Notes

– For heavily soiled laundry and/or soiling which has been

left unwashed for some time, select the Soak additional

option.

Detergent

max. load

Powder detergent, detergent for coloured fabrics, liquid

detergent, detergent for delicates. See also "Detergent"

section.

2.5 kg

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Delicates cold to 40°C 21

Fabric

For delicate garments made of synthetic fibres, mixed fibres

and for easy care cotton shirts and blouses.

Curtains, including net curtains, specified as

machine-washable by the manufacturer.

Additional options Short, Pre-wash, Soak

Notes

– Laundry remains relatively crease-free for easier ironing.

– Dust in curtains usually makes using a programme with

Pre-wash advisable.

– For curtains made from delicate fabrics reduce the spin

speed or select Without spin.

Detergent

Liquid detergent for delicates. See also "Detergent" section.

1 kg

max. load

Silks 30°C /c

Fabric

Hand-washable fabrics with no wool content, e.g. satin, lace

and silk.

Additional options Water plus

Notes

– Laundry remains relatively crease-free for easier ironing.

– Place socks, tights, bras etc.- in a washing bag.

Liquid detergent for delicates. See also "Detergent" section.

1 kg

Detergent

max. load

Woollens cold to 40°C /ac

Fabric

Machine-washable or hand-washable wool or wool blend

fabrics. If the care label does not specify a temperature,

wash using the cold setting. Please note hand-washable

garments will not shrink, stretch, matt or felt beyond the

accepted tolerance of the item.

Notes

– During the final spin the 1300 rpm indicator light will come

on. However, to protect the laundry, the machine will only

spin at 1200 rpm during this spin.

Detergent

max. load

Liquid detergent for machine washable woollens. See also

"Detergent" section.

2 kg

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Quick wash 40°C 7

Fabric

Very lightly soiled fabrics, which can be washed in the Cottons

programme.

Additional option Water plus

Notes

– Add less detergent (half load).

– If fabrics have a high proportion of man-made fibres it is

advisable to programme the machine for "Gentle Action".

See "Programmable functions". Note that this programme

is not suitable for delicate items.

Detergent

max. load

Powder detergent, detergent for coloured fabrics, liquid detergent.

2.5 kg

Mixed wash 40°C 72

Fabric Small loads of garments made from man-made fibres and cotton

garments which can be washed together. Sort according to colour.

Additional options Short, Pre-wash, Soak, Water plus

Notes

If fabrics have a high proportion of man-made fibres it is advisable

to programme the machine for "Gentle Action". See "Programmable

functions"

Detergent

max. load

Starch

Powder detergent, detergent for coloured fabrics, liquid detergent

3 kg

Fabric

Table cloths, napkins, overalls, uniforms.

Notes

– The laundry should be washed but not treated with fabric

conditioner. Use liquid starch.

max. load

Separate rinse

Fabric

5 kg

Articles which have been washed by hand and only need to be

rinsed and spun in the machine.

Notes

– During the final spin the 1300 rpm indicator light will come on.

However, to protect the laundry, the machine will only spin at

1200 rpm during this spin.

max. load

5 kg

Drain/Final spin

Notes

– To drain only: select Without spin.

– Do not use for woollens

max. load

5 kg

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Important - other care symbols

Hand wash (If no temperature

is specified use the lowest

temperature or cold)

Do not wash

apf Dry clean

Do not dry clean

Suitable for chlorine

bleaching

Do not use chlorine bleach

Tumble dry

At normal temperature

At low temperature

Do not tumble dry

Ironing

Hot iron

Medium hot iron

Cool iron

Do not iron

N.B. If you have any textiles with the

older wash care labels, select a

programme according to the label

below:

[:\]

?;\

Cottons

Minimum iron

Delicates

Woollens

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Before washing

,^{Do not use solvent-based}

ASort the laundry

cleaning agents in this machine.

^ Sort the laundry by colour and by

care label symbol. Most garments

have a textile care label in the collar

or side seam.

Dark textiles often contain excess dye

and should be washed separately

several times before being washed

together with other garments. Always

wash whites and coloureds separately.

Delicate textiles should be washed

separately in a delicates programme

(use a washing bag where

appropriate).

^ Empty all pockets.

– Curtains:

,^{Foreign objects (e.g. nails,}

coins, paper clips, etc.) can cause

damage to garments and

Remove lead weights and strips or

place in a laundry bag.

components in the machine.

– Underwiring and collar stiffeners:

Any loose wiring in bras, shirt collar

stiffeners, etc. should be removed or

sewn in.

^ Badly soiled areas, e.g. collars and

cuffs, and water soluble stains can

be pre-treated with bar soap, liquid

detergent or detergent mixed into a

solution or paste.

– Knitted garments, trousers and

jeans, T-shirts and sweat shirts:

Turn inside out, if recommended by

the manufacturer.

With particularly stubborn stains ask

your dry cleaner for advice.

– Close any zips, fasten hooks and

eyes etc before washing.

– Fasten duvet covers to prevent

smaller items rolling up inside them.

,^{Do not wash any items in this}

machine which are specified by the

manufacturer as not washable on

the care label. (h symbol)

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Selecting a programme

BSwitch on the washing machine

^ Press in the I-On/0-Off button.

COpen the drum door

FSelect a programme

^ Press the Door button and open the

drum door.

DLoad the drum

^ Unfold the laundry and load loosely

in the drum. To achieve best results it

is advisable to make up mixed loads

consisting of both large and small

items. This improves the washing

effect and helps distribute the load

evenly to keep the machine stable

and reduce the noise level during

spinning.

^ Turn the programme selector to the

required programme.

GSelect a spin speed

To save energy and water try to load

the maximum amount for the

programme selected.

However, be careful not to overload the

machine. Overloading reduces the

wash result and causes more creasing.

EClose the drum door with a gentle

swing.

Make sure that no garments are caught

between the drum door and seal.

^ Press the "Spin" button repeatedly

until the indicator light for the spin

speed you want comes on.

In some programmes the maximum

spin speed is limited. The machine will

not allow a higher spin speed to be

selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Additional options

Pre-wash

HSelect additional option(s) if

For heavily soiled laundry and items

with dried on stains.

required.

Additional options can be selected as

long as they are compatible with the

basic programme being used.

Soak

For heavily soiled and stained items

with protein stains (e.g. blood, fats

and oils, cocoa).

Each press of the top button selects the

additional option in the following order:

Short, Pre-wash, Soak, no selection.

– A length of time of between 30

minutes and 2 hours can be

programmed in 30 minute

Use the lower button to select or

deselect the Water plus option

increments for the soak process.

– The machine is set ex-works with a

soak period of 2 hours.

To programme in a different soak period

see "Programmable functions - Soak".

Water plus

If you want to increase the water level

for a wash process you can choose one

of the four options for the Water plus

button. The options are explained in the

section on "Programmable functions -

Water plus system".

^ Press the appropriate additional

option button. Press the top button

repeatedly until the indicator light for

the additional option you want comes

on.

The machine is set at the factory so that

the water level in the main wash and

rinses will be increased if the Water

plus button is pressed.

Short

For lightly soiled items.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

IAdd detergent

It is important to dispense the correct

amount, because . . .

. . . too little results in the following:

– Laundry will not be properly clean

and will in time become grey and

hard to the touch.

– Greasy particles cling to the laundry.

– Limescale deposits on the heater

elements.

. . . too much results in the following:

^ Pull out the detergent drawer and

place detergent in the compartments

as follows:

– Excessive foam which causes a low

level of agitation and poor wash,

rinse and spin results.

i = Detergent for Pre-wash

(if selecting Pre-wash, add ¹/₄

of the total amount recom-

– High water consumption (an

additional rinse cycle will

automatically switch in).

mended). This compartment is

also used for starch formula-

tions when starching separately.

– A burden to the environment.

j = Detergent for the main wash

including Soak

= Fabric conditioner or liquid

starch.

^ Close the detergent drawer.

See section on "Detergent" for further

information on detergent and the

amount to dispense.

JPress the Start button.

This starts the programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

At the end of a programme

Check that all items have been

removed from the drum. Items left in

the drum could discolour other items

in the next wash or become

When the Anti-crease/Finish indicator

light comes on the laundry can be

removed from the drum. (This light

stays on at the end of the programme

and remains on until the selector is

turned back to the Finish position).

discoloured themselves.

MSwitch off the washing machine.

KOpen the drum door

^ Press the Door button.

LRemove the laundry.

^ Press and release the I-On/0-Off

button and turn the programme

selector to Finish. The

Anti-crease/Finish light will then go

out.

,^{Only remove laundry from the}

machine once the drum has

NClose the drum door

stopped turning. Reaching into a

moving drum is extremely

dangerous and could result in injury.

Otherwise there is the danger of

objects being placed inadvertently in

the drum. If these remained unnoticed

and were washed in the next load, they

could damage the laundry.

^ Check the folds in the door seal for

any small articles, e.g. buttons which

may be lodged there.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Adding or removing laundry

after a programme has started

The door cannot be opened, if:

– the suds temperature is above 55°C.

– the water is above a certain level.

Laundry can be added or removed

after the programme has started when

using the following programmes:

– the programme has reached the

Final spin stage.

– Cottons

– Minimum iron

– Quick wash

– Mixed wash

– Starch

^ Press the Door button in and hold it

until the door springs open.

^ Add or remove items.

^ Close the door.

The programme will continue

automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Interrupting a programme

Skipping a programme stage

^ Switch the washing machine off with

the I-On/0-Off button.

^ Turn the programme selector to

Finish.

To continue with the same programme:

As soon as the programme sequence

indicator light for the programme stage

you want the programme to continue at

starts flashing:

^ Switch the washing machine back on

again with the I-On/0-Off button.

^ Turn the programme selector back

again to the appropriate programme

within 4 seconds.

Altering a programme once

selected

The machine will accept the following

changes after a programme has

started:

To cancel or select a different

programme

– at any time after the start, the spin

speed can be changed within the

limits for the programme.

^ Switch the washing machine off with

the I-On/0-Off button.

^ Turn the programme selector to

Finish.

– up to 6 minutes after the start, the

Water plus additional option can be

selected or de-selected and a

different temperature can be

The programme has now been

cancelled.

selected for the programme in use.

^ Switch the washing machine back on

After the start of a programme it is no

longer possible to select a different

programme.

with the I-On/0-Off button.

^ Select a different programme.

^ Press the Start button.

If the programme selector is moved, the

indicator light Anti-crease/Finish will

start flashing. However, the programme

sequence remains unaffected. The

indicator light will go out again when

the programme selector is moved back

to the programme previously chosen.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Programme sequence

Minimum iron

This washing machine has fully

electronic controls with automatic load

recognition. This machine takes in the

right amount of water required for the

programme depending on the amount

of laundry and its absorbency rate. This

means that programme cycles and

durations shown in the display can

vary.

Main wash

Water level: low

Wash rhythm: normal

Rinses

Water level: high

No of rinses: 2 or 3¹⁾

Spinning

Rinse and interim spin²⁾: yes

Final spin: yes

The programme sequences outlined

below are based on the basic

programme with a full load. Additional

options which can be selected have not

been taken into account.

Delicates

Main wash

Water level: high

Wash rhythm: Gentle action

Rinses

The programme sequence indicator

lights show the stage the programme

has reached.

Water level: high

No of rinses: 3

Cottons

Main wash

Spinning

Rinse and interim spin: no

Final spin: yes

Water level: low

Wash rhythm: normal

Rinses

Water level: medium

No of rinses: 2 or 3¹⁾

Spinning

Rinse and interim spin²⁾: yes

Final spin: yes

Silks /

Main wash

Water level: medium

Wash rhythm: Silks

Rinses

Water level: medium

No of rinses: 2

Spinning

Rinse and interim spin: no

Final spin: yes

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Woollens /

Main wash

Starch

Water level: low

Water level: medium

Wash rhythm: Woollens

Rinses

Wash rhythm: normal

Final spin: yes

Separate rinse

Water level: medium

No of rinses: 2

Spinning

Rinse and interim spin²⁾: yes

Final spin: yes

Water level: high

No of rinses: 2

Final spin: yes

Special features in the programme

sequences:

Quick wash

Main wash

Anti-crease:

Water level: low

Wash rhythm: normal

Rinses

At the end of every programme, with

the exception of the Woollens

programme, the anti-crease action

switches on for a maximum of 30

minutes. The door can be opened and

laundry removed at any time during the

anti-crease phase.

¹⁾A third rinse takes place

automatically if:

Water level: medium

No of rinses: 2

Spinning

Rinse and interim spin²⁾: yes

Final spin: yes

Mixed wash

Main wash

– there is too much foam in the drum

– a spin speed of lower than 700 rpm

has been selected.

Water level: low

Wash rhythm: normal

Rinses

Water level: high

No of rinses: 2

Spinning

Rinse and interim spin²⁾: yes

Final spin: yes

– Without spin has been selected

²⁾Rinse and interim spin:

There is a spin between the rinses.

Omitting rinse and interim spin:

Select Without spin on the spin speed

display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Detergent

All modern detergents produced for

automatic washing machines are

suitable, including liquid, compact

(concentrated), tablets, liquid tablets

and special application detergents.

Use dispensing aids, e.g. balls, if these

are supplied with the detergent. Tablets

are suitable for full loads but note that it

may be impractical to reduce tablets by

proportion to suit smaller loads!

Woollens and knitwear containing wool

mixtures and hand-washable garments

should be washed using a detergent

specifically designed for washing

woollens.

– The soiling level of the laundry.

Lightly soiled

No visible dirt or stains. Possibly

slight body odour.

Normally soiled

Visibly dirty and/or just a few slight

stains.

Heavily soiled

Stains and soiling clearly visible.

– The water hardness level.

Check with your local water supplier

if you do not know the water

hardness level in your area.

Silk should be washed using a liquid

detergent specifically designed for

washing woollens. Do not use

biological detergents on silk as the

enzymes may damage the silk!

Instructions for use and recommended

amounts for a full load are given on the

detergent packaging.

Water softeners

A water softener can be used to cut

down on the use of detergents in

extremely hard water areas. Dispense

according to the amount specified on

the packaging. First add detergent and

then the water softener.

Use a quantity of detergent as for soft

water.

Liquid detergent

Miele do not recommend connecting

the machine to a household water

softener.

Liquid detergent should be dispensed

using a ball provided by the manufac-

turer for programmes without a

pre-wash.

Washing with several

components

For programmes with a pre-wash you

will need to purchase a special

If you wash using several components

(e.g. special application detergents),

dispense them into compartment j in

the following order:

container from the Miele Spare Parts

department which sits in the main wash

compartment j of the detergent

dispenser drawer. Add liquid detergent

to this container for the main wash and

to compartment i for the pre-wash.

1. Detergent

2. Water softener

The right amount to dispense will

depend on the following:

3. Stain remover

This way the agents are distributed

more efficiently.

– The quantity of laundry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Detergent

Fabric conditioners and liquid

starch

If starching frequently, the dispenser

compartment and especially the

siphon tube and conditioner channel

will need regular cleaning to remove

any residual starch. See "Cleaning

the detergent dispenser drawer".

Do not add starch formulations or

viscous liquid starch to the §

Fabric conditioners make garments soft

and fluffy to handle and help prevent

static cling when tumble drying.

Starch stiffens and gives body to items

of laundry, e.g. shirts, tablecloths and

bed linen.

compartment as it will clog it up. See

"Adding starch separately".

^ Dispense according to the amount

specified on the packaging.

Adding fabric conditioner separately

Automatic dispensing of fabric

conditioner or liquid starch to

laundry at the end of a programme

^ Add fabric conditioner to

compartment §.

^ Turn the programme selector to Starch.

^ Select a spin speed.

^ Press the Start button.

Adding starch separately

Use the separate Starch programme

when using starch formulations or

viscous liquid starch.

^ Prepare and measure the starch in

accordance with the manufacturer’s

instructions.

^ Add starch to compartment i.

^ Turn the programme selector to Starch.

^ Select a spin speed.

^ Press the Start button.

Colour run and dye

removers/dyes

^ Add the fabric conditioner or liquid

starch to compartment §. Do not

exceed the maximum level mark.

^ Do not use colour run or dye

removers in this washing machine.

^ Dyes suitable for use in domestic

washing machines can be used.

However, please note that the salt

used in the dyeing process can

cause corrosion to stainless steel

components in the machine if you

dye frequently. Always observe the

manufacturer's instructions carefully.

The conditioner or liquid starch is

automatically dispensed in the last

rinse. At the end of the programme a

small amount of water remains in the

fabric conditioner compartment §.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Extra cleaning

,^{Disconnect the appliance from}

the mains electricity supply and

withdraw the plug from the socket

prior to cleaning the machine.

Carry out a hot wash (70°C or above)

with powder detergent approx. every 6

weeks to help prevent deposits building

up in the machine. These can occur

when washing is mainly done at low

temperatures, and also lead to

unpleasant smells. If you have no

reason to wash occasionally at this high

temperature, then run a Cottons 95°C

programme with detergent but no

laundry at regular intervals.

^ Clean the casing with a mild

non-abrasive detergent or soap and

water. Wipe dry with a soft cloth.

^ Clean the fascia panel with a damp

cloth and wipe dry with a soft cloth.

^ The drum can be cleaned using a

suitable proprietary stainless-steel

cleaning agent.

,^{Do not use solvents, abrasive}

cleaners, glass cleaners or

all-purpose cleaning agents. These

might damage plastic surfaces and

other components because of the

chemicals they contain.

The washing machine must not be

hosed down.

E-Cloth

A microfibre "E-Cloth" is available from

the Miele UK Spare Parts Department,

Part number 98013530, which is

suitable for cleaning surfaces such as

stainless steel, glass, plastic and

chrome without the use of chemicals. It

can be washed 300 times.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the detergent dispenser

drawer

Remove detergent residues regularly.

^ Clean the siphon.

1. Remove the siphon from

compartment §. Wash under

running warm water. Clean the

siphon tube in the same way.

^ Pull out the detergent dispenser

drawer until a resistance is felt. Press

down the release catch and at the

same time pull the drawer right out of

the machine.

2. Replace the siphon.

Over time, detergent residue can build

up in the water jets in the top of the

detergent drawer housing.

^ Clean the detergent drawer with

warm water.

^ Before replacing the detergent

drawer, use a bottle brush or similar

to clean them out.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the fluff (drain) filter

and pump

Check the fluff filter initially after 3-4

washes to ascertain how often it is likely

to require cleaning.

With normal cleaning approx. 2 litres of

water run out.

If the drain outlet is blocked, up to

25 litres of water will be retained in the

machine.

,^{Caution: if laundry has been}

washed at a high temperature, water

draining out of the machine will still

be hot. Danger of scalding!

^ Use it to open the access flap.

Procedure for draining the machine

^ Place a suitable container under the

access flap.

There is a filter flap opener located

behind the detergent drawer fascia

panel (see illustration).

When draining water from the

machine, do not unscrew the fluff

filter completely or take it right out.

^ Remove the opener.

^ Unscrew the fluff filter lid until water

runs out.

To stop the flow of water:

^ Tighten the fluff filter back up again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Once the flow of water ceases:

^ Clean the inside of the fluff filter

housing. Remove any deposits of

limescale and detergent or foreign

objects from the thread of the filter

housing and filter unit (as these

objects can cause a leakage of wa-

ter). Deposits of limescale are often a

sign of underdosage of powder.

^ Put the fluff filter back in place and

secure.

,^{Make sure the fluff filter is}

securely tightened. Otherwise there

is a risk of water leakage during use.

^ Remove the fluff filter completely.

After cleaning

^ Clean the fluff filter thoroughly.

^ Pour approx. 2 litres of water into the

detergent dispenser compartment

j to reactivate the ball valve.

^ Remove any foreign objects (e.g.

buttons, coins, etc) and fluff. Turn the

impeller by hand to check that it is

free to rotate. Any foreign object

causing an obstruction should be

removed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the water inlet filters

To clean the filter in the water inlet

valve

The washing machine has two filters to

protect the inlet valves.

^ Using pliers, carefully loosen the

ribbed plastic nut on the inlet valve

and unscrew.

These filters should be checked every

six months or so, or more often if there

are frequent interruptions to the water

supply.

To clean the filter in the union in the

open end of the inlet hose:

^ First turn off the stopcock.

^ Unscrew the threaded union

connecting the free end of the inlet

hose to the stopcock.

^ Use water pump pliers to withdraw

the plastic filter by the bar (see

illustration). Clean, put back and

secure.

The two filters must be put back in

place after cleaning.

^ Remove the rubber seal 1 from the

recess.

^ Using pointed pliers, take hold of the

plastic filter bar 2, remove the filter

and clean.

^ Put the filter and seal back in the

reverse order and reconnect the

hose.

^ Turn on the stopcock and check the

connection is watertight. If it leaks,

tighten the connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

With the help of the following notes minor faults in the performance of the

appliance, some of which may result from incorrect operation, can be put right

without contacting the Service Department.

,^{Repair work to electrical appliances should only be carried out by a}

suitably qualified person in accordance with local and national safety

regulations. Unauthorised repairs could be dangerous.

The chart is divided into the following sections to help you:

– The programme does not start.

– The wash programme stops and a fault indicator light comes on.

– A fault indicator light comes on but the wash programme continues as normal.

– General problems or an unsatisfactory wash result.

– The drum door does not open when you press the Door button.

The programme does not start.

Fault indicator

Possible cause

Remedy

Check that

– the mains plug is

The Anti-crease/Finish There is no power.

indicator light is not on,

or the Start indicator

plugged in.

light is not flashing.

– the fuse or circuit

breaker has not

tripped.

The programme does

not start when

Drain/Final spin has

been selected.

The washing machine has Prepare the machine as

not been prepared for

using for the first time.

described in "Before

using for the first time".

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

The wash programme stops and a fault indicator light comes

on.

Fault indicator

Possible cause

Remedy A

The Check drain light

flashes.

The water outlet is

blocked.

Clean the fluff (drain)

filter and drain pump.

The drain hose has been The maximum drain

fixed too high. height is 1 m.

The Check inlet light

The water inlet is blocked. Open the stopcock.

flashes.

The filter in the water inlet Clean the filter.

hose is dirty.

The Check inlet and

Check drain lights flash. system has reacted.

The water protection

Call the Service

Department.

The Soak/Pre-wash or

Rinses indicator light

flashes in the

There is a fault.

Start the programme

again.

If the fault indicators

occur again, contact the

Service Department.

programme sequence.

ATo switch off the fault indicator: Switch off the machine with the I-On/0-Off button

and turn the programme selector to Finish

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

A fault indicator light comes on but the wash programme con-

tinues as normal.

Fault indicator

Possible cause

Remedy A

The Check drain light

flashes.

The drain outlet is

restricted.

Clean the fluff (drain) filter

and drain pump.

The Check inlet light

flashes.

The water inlet is

restricted.

Check whether

– the stopcock is opened

wide enough.

– the inlet hose is kinked.

The filter in the inlet

hose is dirty.

Clean the filter.

The Excess detergent

check light comes on.

Excessive foam has

built up during

washing.

Use less detergent next

time and follow the

recommendation on the

packaging.

The Main wash indicator There is a fault.

light flashes in the

programme sequence

display.

Start the programme again.

If the fault indicator occurs

again, contact the Service

Dept.

The Anti-crease/Finish

The position of the programme selector was altered

indicator light flashes in after the start of the programme. Turn the

the programme

sequence display.

programme selector back to the programme

previously chosen.

ATo switch off the fault indicator: Switch off the machine with the I-On/0-Off button

and turn the programme selector to Finish

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

General problems or an unsatisfactory wash result

Problem

Possible cause

Remedy

The machine shakes

during the spin cycle. resting evenly on the

The four feet are not

Level the machine. See

advice on installation.

floor.

The laundry has not

been spun

The spin speed selected Select a higher spin speed

was too low. next time.

satisfactorily.

The pump makes

strange noises.

These do not indicate a fault. They occur at the end of

a pump sequence as a normal part of the operation.

Large residues of

The water supply

– Clean the filter in the wa-

detergent remain in

the dispenser drawer.

pressure is too low.

ter inlet system.

– It may be useful to press

the Water plus button.

Washing powder used

with water softener

Pour washing powder into

the dispenser before adding

tends to become sticky. any water softener.

The siphon is either Clean the siphon, see

incorrectly positioned or "Cleaning and care -

Fabric conditioner is

not completely

dispensed or too

much water remains in

the § compartment.

clogged.

Cleaning the detergent

drawer".

When laundry is dry it Too vigorous wash

Programme in gentle action

and more water.

feels hard to the

touch.

action.

Not enough detergent

used.

Increase detergent dose to

prevent limescale build up

in laundry.

No fabric conditioner

used.

Use fabric conditioner in last

rinse.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Problem

Possible cause

Remedy

Liquid detergent Liquid detergents do – Use a general purpose washing

does not give the not contain bleaching

machine powder containing a

bleaching agent.

– Pour stain removers into compart-

ment j of the dispenser drawer

and liquid detergent into a

dispenser ball.

required result.

agents. They do not

remove fruit, coffee

and tea stains.

– Never put stain removers and

liquid detergent together in the

dispenser drawer.

Grey, greasy

Insufficient amounts of – Add more detergent.

particles cling to detergent were used

washed laundry. to break down the

particles of grease in

– Before washing the next load run

a Cottons 95°C programme with

powder detergent but without a

load.

heavily soiled laundry.

A stale smell is

in the drum and washing.

Low temperature

Before washing the next load run a

Cottons 95°C programme with

on laundry.

powder detergent but without a load.

There are white The detergent

– Try and brush off the residues with

a soft brush once the laundry is

dry.

residues which

contained compounds

look like powder (zeolites) to aid water

detergent on

dark coloured

laundry.

softening which are

not soluble in water.

These have ended up

on the laundry.

– Use a liquid detergent to wash

dark coloured textiles. Liquid

detergents usually contain no

zeolites.

Machine is

Machine connected to Connect machine to mains water

constantly over- a water softener.

and dose detergent for hard water.

foaming/excess

detergent light is

on.

Too much detergent

was used.

Reduce detergent.

Too little detergent

was used.

Increase detergent slightly to bring

back foam suppressant ingredients.

Clothes are

coming out

creased.

Programme was

overloaded.

Reduce quantity of clothes in drum.

The wrong

– Check care labels with section

programme was used.

"How to wash correctly".

– Use easy iron conditioners.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

The drum door does not open when you press the Door button.

Problem

Remedy

The machine is not

connected to the

electricity supply.

Put the plug in the socket and switch on.

The washing machine is Switch the machine on with the I-On/0-Off button.

not switched on.

Power cut.

Open the drum door as described in the section

"Opening the door in the event of a power failure".

The door was not

correctly engaged.

Press hard against the lock side of the drum door

and then press the Door button.

There is still water in the Clean the fluff (drain) filter and the drain pump.

drum and the machine is

unable to drain.

For safety reasons the drum door cannot be opened if the suds temperature is

higher than 55°C.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Opening the drum door in the

event of a power failure

^ Drain the water as described in the

"Cleaning the fluff filter and pump"

section of "Cleaning and care".

^ Switch the washing machine off.

,^{Always make sure that the drum}

is stationary before reaching into the

machine to remove laundry.

There is a lever behind the detergent

drawer facia panel.

Reaching into a moving drum is

extremely dangerous.

^ Remove the lever.

^ Pull the emergency release

downwards (see illustration). The

drum door will open.

^ Use it to open the access flap.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Customer contact

Please note that telephone calls may

be monitored and recorded to

improve our service.

In the event of any faults which you

cannot remedy yourself please contact

– Your Miele dealer or

– Your nearest Miele Service

Department (see back cover for the

address).

When contacting the Service

Department, please quote the model

and serial number of your appliance,

both of which are shown on the data

plate visible at the top inside of the

door above the porthole glass when the

door is open.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Front view

aInlet hose (tested to withstand

hDetergent dispenser drawer

pressure of at least 7,000 kPa)

iDrum door

bElectricity supply cable

jFlap for fluff filter, drain pump and

c - f Flexible drain hose (with

emergency release

detachable swivel elbow)

kHandle recesses for moving the

gFascia panel with controls

machine

lFour height adjustable feet

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Rear view

aProtruding lid edge for holding when

eTransit bar covers

fRestraining clip for:

– Inlet hose

moving the machine

bElectricity supply cable

cInlet hose (tested to withstand

– Drain hose

pressure of at least 7,000 kPa)

– Electricity supply cable

– Transit bars when removed

dDrain hose

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Installation surface

Installing the washing machine

A concrete floor is the most suitable

installation surface for a washing

machine, being far less prone to

vibration during the spin cycle than

wooden floorboards or a carpeted

surface.

To manoeuvre the machine out of its

packing case to its installation site hold

it by the edge of the lid where it

protrudes to the rear of the washing

machine as well as by the handle

recesses at the front.

Please note the following points:

Please note:

^ The machine must be level and

securely positioned.

^ Do not lift the machine by the drum

door.

^ To avoid vibrations during spinning,

the machine should not be installed

on soft floor coverings.

,^{Ensure that the machine feet and}

the floor are dry to prevent the

machine from slipping during the

spin cycle.

If installing on a wooden joist floor:

^ We recommend a plywood base

(at least 59x52x3 cm). The base

should span several joists and be

bolted to the joists and not only to the

floorboards. Check for the presence

of pipes and cables.

Removing the transit fittings

If possible, install the machine in a

corner, as this is usually the most stable

part of the floor.

,^{If the machine is installed on a}

raised plinth, it has to be secured

against slippage during spin using

retaining clips (available from the

Miele Spare Parts Dept).

^ To remove the left and right covers

1. Use a screwdriver to prise out the

cover as illustrated.

2. Pull the cover forwards to remove.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

^ Using the spanner supplied turn the

left-hand transit bar 90°, then

^ Turn the right-hand transit bar 90°,

then

^ withdraw the transit bar.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

,^{The washing machine must not}

be moved without the transit bars in

place.

Store the transit bars as shown or

keep them in a safe place for future

use. They must be re-fitted if the

machine is to be moved again

(e.g.when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the

procedure.

^ Fit the covers on to the two holes.

Then plug the holes as shown with

the caps.

^ Secure the transit bars to the back of

the washing machine. Make sure that

holes b are fitted over retainers a.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Levelling the machine

The machine must stand perfectly level

on all four feet to ensure safe and

proper operation.

^ Using the spanner supplied turn

counter nut 2 in a clockwise

direction. Then turn counter nut 2

together with foot 1 to unscrew.

^ Use a spirit level to check the

machine is standing level.

Incorrect installation may increase

electricity and water consumption and

may cause the machine to move about.

^ Hold foot 1 securely with a pipe

wrench. Turn counter nut 2 again

using the spanner supplied until it

sits firmly up against the housing.

Screwing out and adjusting the feet

The four adjustable screw feet are used

to level the machine. All four feet are

screwed in when the machine is

delivered.

,^{All four counternuts must be}

firmly up against the housing. Please

also check this for the feet which did

not need adjustment. Otherwise

there is the danger of the machine

moving about.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Building under a continuous

worktop/in a kitchen run

Washer and Dryer stack

A Miele tumble dryer can be stacked

with the washing machine. A stacking

kit* is necessary and can be purchased

– A special building under conversion

kit* is required.

The machine lid must be replaced by from the Miele Spare Parts Department.

a cover plate. To ensure electrical

safety the cover plate must be fitted.

Please note

N.B.

If you wish to push your machine under

a worktop and there is space to do this

without removing the lid, the

conversion kit is not necessary.

Otherwise the conversion kit is

essential.

– For installation under a work surface

900/910 mm from the floor, a raising

kit* is required.

– Connections for electricity, water and

drainage should be installed in such

a way that they remain accessible

when the machine is in place.

Fitting instructions are supplied with the

conversion kit.

a Safety distance to wall:

at least 2 cm

All parts marked* are available from the

Miele Spare Parts or Sales Department.

b Height:

Stacking kit with pull-out shelf:

approx. 169 cm

Stacking kit without pull-out shelf:

approx. 170 cm

The fitting of building under kits and

stacking kits must only be

undertaken by qualified and

competent persons, in accordance

with the instructions supplied with

the kit.

Replacing the lid

If the lid has been removed in order to

fit a stacking kit or cover plate, ensure

that, if the lid is replaced, it fits securely

into the rear holders. Otherwise, it is not

properly secure for transport.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

The Miele water protection

system

– Overflow protection

This prevents the washing machine

taking in too much water. If the water

level exceeds a certain level, the

drain pump switches in and pumps

the excess water away.

The Miele water protection system

protects the washing machine from

water damage.

The system consists of three main

components:

3) Drain hose

1) the inlet hose

The drain hose is protected by a

ventilation system which prevents the

washing machine from being

emptied completely.

2) the electronic unit and the washing

machine housing

3) the drain hose

1) Inlet hose

The inlet hose can withstand pressure

of more than 7,000 kPa.

2) Electronic unit and washing

machine housing

– Sump

Any leaking water is collected in a

sump in the base of the appliance. A

float switches off the safety valves,

preventing any more water flowing

into the machine and water in the

suds container is pumped away.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Connection to the water supply

In order to protect the water inlet

valve, the two dirt filters - one in the

open end of the inlet hose, one at

the inlet point in the machine must

not be removed.

The machine should be connected to a

mains water supply in accordance with

local and national safety regulations.

The German authorities do not require it

to have a non-return valve as the

washing machine has been designed

to comply with DIN regulations.

Extension hose

– Longer hoses 2.5 or 4.0 m in length

are available from your Miele dealer

or the Miele Spare Parts Department

as optional extras.

The machine is designed to operate

with a flow pressure of between

100 kPa and 1,000 kPa. If it is higher

than 1,000 kPa it is essential to fit a

reducer valve.

Connection to the mains water supply

should incorporate a mains stopcock

with ³/₄" thread. The stopcock should

be fitted by a qualified plumber.

,The connection point is subject

to mains water pressure. Turn on the

stopcock slowly and check for leaks.

Correct the position of the washer

and union if appropriate.

The washing machine is not suitable

for connection to a hot water supply

and connection to a household wa-

ter softener is not recommended.

Maintenance and care

Only use a genuine Miele hose should

you ever need a replacement or

extension. These are tested to

withstand pressure of at least

7,000 kPa.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Connection to the drainage

system

Drain hose connection:

1. Direct into a sink or basin:

Please note the following

The machine drains via a drain pump

with a delivery head of 1 metre*.

– Hook the hose over the edge and

secure.

The drain hose must not be kinked as

this restricts drainage. The swivel elbow

at the end of the hose can be turned in

either direction, or can be detached if

required, with a sharp twist and pull.

– Make sure that the water can drain

away freely without hindrance.

Otherwise there is a risk of water

overflowing or of some of the drained

water being sucked back into the

machine.

If required, the drain hose can be

extended to a length of 5 m. The

necessary parts can be purchased

from the Miele Spare Parts Department

or your Miele dealer.

2. Connected securely to a plastic drain

pipe with a rubber nipple. There is no

need to use a non-return valve.

* For a delivery head of more than 1 m

(up to a maximum of 1.8 m) a second

duo-drain pump is available with the

corresponding kit from the Miele Spare

Parts Department or your Miele Dealer.

3. Connected securely to a standpipe.

4. Connected securely to a floor gully.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Electrical connection U.K.

The wire which is coloured green and

yellow must be connected to the

terminal in the plug which is marked

with the letter E or by the earth symbol

z or coloured green, or green and

yellow.

All electrical work should be carried out

only by a suitably qualified and

competent person, in strict accordance

with national and local safety

regulations.

The wire which is coloured blue must

be connected to the terminal in the

plug which is marked with the letter N

or coloured black.

The appliance is supplied with a mains

cable with moulded plug for connection

to a 230-240V mains supply. The

voltage, rated load and fuse rating

are given on the data plate. Please

ensure these match the household

mains supply.

The wire which is coloured brown must

be connected to the terminal in the

plug which is marked with the letter L or

coloured red.

Connection should be made via a fused

plug and suitable switched socket

which is easily accessible after

installation.

WARNING: THIS APPLIANCE

MUST BE EARTHED

Ensure power is not supplied to the

appliance while installation work is

being carried out.

For extra safety it is advisable to install

a residual current device (RCD), with a

trip current of 30 mA (in accordance

with DIN VDE 0664, VDE 0100 Section

739).

Do not connect via an extension lead.

Important

The wires in the mains lead are

coloured in accordance with the

following code:

Green/yellow = earth

Blue

= neutral

= live

Brown

Where it is necessary to change plugs,

if the colours of the wires in the mains

lead of this appliance do not

correspond with the coloured markings

identifying the terminals of your plug,

proceed as follows:

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Non-rewireable plugs BS 1363

If this machine is fitted with a

non-rewireable plug, the following

information applies:

If the socket outlets are not suitable for

the plug supplied with the product, it

must be cut off and an appropriate plug

fitted. The fuse carrier and fuse should

be removed from the old plug and

disposed of.

The old plug should then be disposed

of and on no account be inserted into

any socket elsewhere in the house

(electric shock hazard).

The fuse cover must be refitted when

changing the fuse, and if the fuse cover

is lost, the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is

embossed in words on the base of the

plug (as applicable to the design of

plug fitted).

Replacement fuses should be ASTA

approved to BS 1362 and have the

correct rating. Replacement fuses and

fuse covers may be purchased from

your local electrical supplier or Service

agent.

Download from Www.Somanuals.com. All Manuals Search And Download.

Consumption data

Programme

(without any additional

options or

Load

Consumption data

Energy

Water

Duration

normal Short

in kWh

in litres

programmable

functions)

Cottons

95°C

60°C¹⁾

5.0 kg

1.70

0.95

0.50

1 h 47 min 1 h 32 min

1 h 56 min 1 h 26 min

40°C

Minimum iron

40°C

2.5 kg

1.0 kg

2.0 kg

0.45

0.35

0.24

0.23

1 h 16 min 1 h 01 min

Delicates

30°C

59 min

37 min

40 min

49 min

Silks /

30°C

–

Woollens /

30°C

¹⁾EN 60456 test programme

Consumption data can vary from the nominal values given depending on water

pressure, water hardness, water inlet temperature, room temperature, type and

volume of load, fluctuations in the electricity supply and any additional options

selected.

N.B.

Consumption data obtained from a machine tested in Germany.

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical data

Height

85.0 cm

59.5 cm

58.0 cm

94.5 cm

93 kg

Width

Depth

Depth with door open

Weight

Maximum floor load

Capacity

1600 Newton (approx. 160 kg)

5 kg dry laundry

see data plate

see "Consumption data"

100 Pa (1 bar)

1.000 Pa (10 bar)

1.60 m

Voltage

Rated load

Fuse rating

Consumption data

Water flow pressure min.

Water flow pressure max.

Inlet hose length

Drain hose length

Connection cable length

Drain pump head max.

Drain pump length max.

Test certificates awarded

1.50 m

1.60 m

1.00 m

5.00 m

Radio/TV suppression, VDE

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

for changing

standard settings

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

The programmable functions can be

used to tailor washing programmes to

suit your individual requirements.

The settings are as follows:

Setting 1:

an increase in the rinse water level for

the programmes listed (except for

Silks).

The programmable functions are

activated with the help of the Start

button and the programme selector.

Setting 2:

an increase in the water level in the

main wash and rinses for the

programmes listed (the washing

machine is delivered with setting 2

programmed as standard).

Water plus system

Selecting the Water plus additional

option increases the water intake in

the programmes listed below.

Setting 3:

The water intake is increased in the

wash and rinse stages and in the -

Cottons programme an extra rinse

cycle is introduced.

an extra rinse cycle in the Cottons

programme only.

Setting 4:

an increase in the water level in the

main wash and rinses for the

programmes listed and also an extra

rinse cycle in the Cottons programme.

This setting should be programmed in if

laundry is too hard after drying and if

someone in the household suffers from

a detergent allergy.

There are four different settings which

can be programmed to alter the water

intake for the following programmes:

– Cottons

– Minimum iron

– Quick wash

– Mixed wash

– Silks

Steps A to G on the following page

describe how to programme and store

a setting in memory.

The programmed setting is then

activated by pressing the Water plus

additional option button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Follow steps A to G to programme

ETurn the programme selector to the

and store a setting in memory.

Cottons 75°C position:

Before you begin, first ensure that:

– The washing machine is switched off.

– The machine is properly closed.

– The programme selector is at Finish.

The Soak/Pre-wash sequence

indicator light will briefly flash twice in

2 second intervals, to show that

factory Setting 2 is stored in memory.

FEach subsequent press on the Start

button selects a different setting.

APress the Start button and keep it

pressed in whilst carrying out steps

B to C.

The Soak/Pre-wash sequence indicator

light will flash:

BSwitch the machine on with the

– x 1 = Setting 1

I-On/0-Off button.

higher rinse water level selected

CWait until the Start indicator light

– x 2 = Setting 2

comes on . . .

higher water level in the main wash

and rinses (factory setting)

D. . . and then release the Start

button.

– x 3 = Setting 3

extra rinse in the Cottons programme

– x 4 = Setting 4

higher water level in the main wash

and rinses and an extra rinse in the

Cottons programme

GSwitch the washing machine off with

the I-On/0-Off button.

The Water plus button has now been

allocated the setting you have chosen.

This setting will remain in memory until

another setting is programmed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Gentle action

APress the Start button and keep it

pressed in whilst carrying out steps

B to C.

Activating gentle action reduces the

drum action. Slightly soiled items are

washed more gently. It should be

activated for garments with a single

bar under the care label and for

articles which feel too hard after they

have been dried.

BSwitch the machine on with the

I-On/0-Off button.

CWait until the Start indicator light

comes on . . .

D. . . and then release the Start

button.

Gentle action can be used with the

Cottons, Quick wash, Starch and Mixed

wash programmes.

ETurn the programme selector to the

Cottons 60°C position:

If "Gentle action" is programmed into

the machine, every wash cycle in these

programmes will be carried out with

gentle action rhythm.

If the Soak/Pre-wash sequence

indicator light:

does not flash = Gentle action

has not been

The washing machine is delivered with

"Gentle action" de-activated.

activated.

flashes = Gentle action

has been activated.

Follow steps A to G to programme

and store in memory.

FPress the Start button to activate or

deactivate the Gentle action option.

Before you begin, first ensure that:

– The washing machine is switched off.

– The machine is properly closed.

– The programme selector is at Finish.

GSwitch the washing machine off with

the I-On/0-Off button.

The setting you have selected is now

stored in memory and will remain so

until you alter it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Top-up rinse for Cottons

APress the Start button and keep it

pressed in whilst carrying out steps

B to C.

When this is activated, additional wa-

ter flows into the drum at the end of

the main wash and the suds are

cooled down. Hot suds can damage

plastic drainage pipes.

BSwitch the machine on with the

I-On/0-Off button.

CWait until the Start indicator light

comes on . . .

Top-up rinse takes place when

temperatures of 95°C and 75°C are

selected.

D. . . and then release the Start

button.

ETurn the programme selector to the

Top-up rinse should be activated:

Cottons 40°C position:

– to prevent the danger of scalding if

the drain hose is hooked over the

edge of a sink or basin.

If the Soak/Pre-wash sequence

indicator light:

does not flash = the Top-up rinse for

Cottons has not

– where the drainage pipes do not

comply with DIN 1986.

been activated.

The washing machine is delivered with

the Top-up rinse for Cottons

deactivated.

flashes

= the Top-up rinse for

Cottons has been

activated.

Follow steps A to G to programme

and store in memory.

FPress the Start button to activate or

deactivate the Top-up rinse for

Cottons option.

Before you begin, first ensure that:

– The washing machine is switched off.

– The machine is properly closed.

– The programme selector is at Finish.

GSwitch the machine off with the

I-On/0-Off button.

The setting you have selected is now

stored in memory and will remain so

until you alter it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Memory function

APress the Start button and keep it

pressed in whilst carrying out steps

B to C.

If an additional option(s) is selected

for a programme, and / or the spin

speed is altered, the machine stores

these changes in memory at the start

of a programme.

BSwitch the machine on with the

I-On/0-Off button.

CWait until the Start indicator light

comes on . . .

When that particular programme is

chosen again, the display will show the

additional option(s) and / or spin speed

which have been stored for that

programme in the memory.

D. . . and then release the Start

button.

ETurn the programme selector to the

Cottons 30°C position:

The washing machine is delivered with

the memory function deactivated.

If the Soak/Pre-wash sequence

indicator light:

does not flash = the Memory func-

tion has not been

Follow steps A to G to programme

and store in memory.

activated.

Before you begin, first ensure that:

– The washing machine is switched off.

– The machine is properly closed.

– The programme selector is at Finish.

flashes

= the Memory

function is

activated.

FPress the Start button to activate or

deactivate the Memory function

option.

GSwitch the machine off with the

I-On/0-Off button.

The setting you have selected is now

stored in memory and will remain so

until you alter it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programmable functions

Soak

APress the Start button and keep it

pressed in whilst carrying out steps

B to C.

A length of time of between 30 minutes

and 2 hours can be programmed in 30

minute increments for the soak

process.

BSwitch the machine on with the

I-On/0-Off button.

If the soak button is pressed the

selected soak time will be carried out

for the period selected before the wash

programme is run.

CWait until the Start indicator light

comes on . . .

D. . . and then release the Start

button.

The machine is set as standard to a two

hour soak time.

ETurn the programme selector to the

Minimum iron 60°C position:

The Soak/Pre-wash sequence

Follow steps A to G to programme

indicator light will briefly flash once

every 2 seconds, to show that a soak

time of 2 hours is stored in memory.

and store in memory.

Before you begin, first ensure that:

– The washing machine is switched off.

– The machine is properly closed.

– The programme selector is at Finish.

FEach subsequent press on the Start

button selects a different setting.

If the Soak/Pre-wash sequence

indicator light:

– flashes x 1 = the soak time is

2 hours

– flashes x 2 = the soak time is

1 hour 30 minutes

– flashes x 3 = the soak time is

1 hour

– flashes x 4 = the soak time is

30 minutes

GSwitch the machine off with the

I-On/0-Off button.

The Soak button has now been

allocated the setting you have chosen.

This setting will remain in memory until

another setting is programmed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Alteration rights reserved/4403

M.-Nr. 06 020 350 / 00

This paper consists of cellulose which has been bleached without the use of chlorine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Ventilation Hood DA3060 User Manual
Moxa Technologies Switch EDS 208 User Manual
MRV Communications Switch MR2228 S2C User Manual
NCT Group Microscope Magnifier 2000M User Manual
Nextar Digital Photo Frame N10W 402 User Manual
Niles Audio Stereo System ZR 4630s User Manual
Nokia Bluetooth Headset BH 504 User Manual
Nortel Networks Server NN44470 100 User Manual
Omega Speaker Systems Thermometer DFG81 User Manual
Outlaw Audio Portable Speaker LFM 1EX User Manual