MP3223.QXD 3/3/03 9:53 AM Page 16
PORTABLE STEREO SYSTEM WITH
CD PLAYER AND AM/FM RADIO
MODEL: MP3223
BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE
INSTRUCTIONS COMPLETELY.
OPERATING INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 2
SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instructions
carefully. Please note that these are general precautions and may not
pertain to your unit. For example, this unit may not have the capability
to be connected to an outdoor antenna.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
1. READ INSTRUCTIONS
Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
All the safety and operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. ATTACHMENTS
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built-up static charges. Section 810 of the National Electric
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge product, size of grounding conductors,
location of antenna discharge product, connection to grounding
electrodes, and requirements for grounding electrode.
Do not use attachments not recommended by the product's
manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water- for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury and serious damage to
the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the
PORTABLE CART WARNING
(symbol provided by RETAC)
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
surfaces may cause the appliance and cart
18. SERVICING
combination to overturn.
9. VENTILATION
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation and to ensure reliable operation of the product
and to protect it from overheating. These openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or heat source. This
product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician
uses replacement parts specified by the manufacturer or those that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
10. POWER SOURCES
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power
company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment of other controls may result
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
f.
When the product exhibits a distinct change in performance - this
indicates a need for service.
13. LIGHTNING
23. HEAT
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
To protect your product from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
14. POWER LINES
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 3
PREPARATION FOR USE
Unpacking and Setup
•
Carefully remove the unit from the display carton and remove all packing material from the unit itself.
•
The detachable AC power cord is packed in the carton separately from the unit. Make sure that the AC
power cord is not accidentally discarded with the carton or packing material.
•
Press the CD Door OPEN/CLOSE area to open the CD compartment door. There is a white card in the
CD compartment which is intended to prevent the CD pickup from moving during shipment of the
product. Remove this card from the CD compartment before use.
Power Sources
This portable audio system is designed to operate on either 120V AC 60Hz house current DC or by using
eight (8) ‘C’ batteries, not included. Attempting to operate this unit from any other power source may cause
damage to the unit, which is not covered by your warranty.
AC Operation
Unwind the AC cord and extend it to its full length. Insert the small end of
the AC cord into the AC power jack on the rear of the unit. Insert the
other end of the AC cord into any convenient 120V 60Hz household
outlet.
Please note that this unit is equipped with a polarized AC plug which has
one blade wider than the other. This is a safety feature to reduce the
likelihood of electric shock. This polarized AC plug will only fit in a polarized AC outlet. If you find that you
cannot insert this plug into your outlet, you may have an obsolete non-polarized outlet. Please do not try to
defeat this safety feature by using a non-polarized adapter or by filing the wider blade to make it fit into your
outlet. If this plug does not fit into your outlet, you should contact a qualified licensed electrician to replace
your obsolete outlet.
Battery Installation
To use this unit with battery power, remove the battery compartment on the bottom of the unit by sliding it
towards the rear of the unit and lifting the battery door off. Insert eight (8) ‘C’ size batteries following the
diagram in the compartment.
NOTE: The AC power cord must be disconnected from the AC power jack on the rear of the unit in order for
the unit to operate on battery power.
+
+
+
-
-
-
-
-
-
-
+
+
+
-
+
+
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 4
LOCATION OF CONTROLS
1 2 3 4 5 6 7
8
9
10 11 12 13 14 15 16
17
18 19
20 21
22 23 24
1. CD Function Button
13. CD Door OPEN/CLOSE Area
14. STOP (■)/BAND Button
15. TUNING/SKIP/Search DOWN Button
16. TUNING/SKIP/Search UP Button
17. POWER ON/OFF Button
18. Speaker
2. TIMER/SLEEP Button
3. RADIO Function Button
4. AC Power Jack (Rear of Unit)
5. REPEAT/MEM-UP (Memory Up) Button
6. MEMORY/CLOCK ADJ (Adjust) Button
7. VOLUME Up Button
19. X-BASS Button
8. VOLUME Down Button
9. FM Rod Antenna
20. Display with Back Light
21. Battery Compartment (Bottom of Unit)
22. Speaker
10. CD Compartment
11. Carrying Handle
23. COLOR Cycle Button
24. COLOR Hold Button
12. PLAY/PAUSE (Š/ ) Button
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 5
OPERATING INSTRUCTIONS
SETTING THE CLOCK
1
2
3
1
2
With the power off, press and hold Press the TUNING/SKIP/Search Press the MEMORY/CLOCK ADJ
the MEMORY/CLOCK ADJ UP ■ or DOWN ■ button to set button and the hours will blink.
button; “24H” will blink.
the unit to the 24 hour (24H)
mode (also known as military
time), or 12 hour (12H) mode.
X-BASS
4
5
1
1
1
3
2
3
2
Press the TUNING/SKIP/Search Press the TUNING/SKIP/Search
UP ■ or DOWN ■ button to set UP ■ or DOWN ■ button to set
the current hour, then press the the current minute. Press the
MEMORY/CLOCK ADJ button ■ MEMORY/CLOCK ADJ button ■
With the power on, press the X-
BASS button to enhance the
overall bass sound; “X-BASS” will
appear in the display.
again; the minute digits will blink.
and the time will be set.
COLOR BUTTONS
When the unit is on, the display will cycle through the colors of the selected Color options - experiment for
your favorite color sequence! Change the color selection, or hold a particular color as follows:
1
2
3
Press and hold the COLOR Cycle
When the unit is on, press the button until RHYTHM appears in the
To leave one solid color in the
display, press the COLOR Hold
button; HOLD will appear in the
display. Press the COLOR Hold
button again to continue the color
cycling.
display, then release. The display
color will then change according to
the rhythm of the music. Press and
hold the COLOR Cycle button again
until RHYTHM disappears from the
display to cancel Rhythm.
COLOR Cycle button to cycle
through the 14 color options.
Each option will display a different
color sequence in the display.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 6
LISTENING TO THE RADIO
1
2
3
1
2
2
1
Press the POWER ON/OFF Press the RADIO Function button Use the TUNING/SKIP/Search
button to turn the unit on.
■ to select the Tuner mode.
UP ■ or TUNING/SKIP/Search
Press the STOP (■)/BAND button DOWN ■ button to select the
■ to select AM or FM.
desired AM or FM station. When
a strong FM Stereo signal is
received, the FM Stereo indicator
will light.
6
4
5
1
2
2
1
Press the POWER ON/OFF
button to turn the radio off.
If you press and hold the For an enhanced Bass sound,
TUNING/SKIP/Search UP ■ or press the X-BASS button ■.
TUNING/SKIP/Search DOWN ■ Adjust the VOLUME ■ as
button for one second, then desired.
release, the unit will automatically
scan to the next broadcasting
station.
HINTS FOR BETTER RECEPTION
FM - Make sure that the telescopic FM Rod Antenna is raised and extended to its full length. You may have
to vary the direction of the antenna to find the strongest signal for each FM station.
AM - The AM ferrite bar antenna is located inside the cabinet. It may be necessary to turn the unit slightly so
that the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to
find the position that provides the strongest reception for each of your favorite AM stations.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 7
TO SET/RECALL THE RADIO PRESETS (10 AM and 10 FM)
1
2
3
2
3
1
2
Press the POWER ON/OFF Press the STOP (■)/BAND button Press the MEMORY/CLOCK ADJ
button ■ to turn the unit on.
Press the RADIO Function button
■ to select the Tuner mode.
button; “MEMORY” will blink in
the display and a preset number
will appear.
■ to select AM or FM.
Use the TUNING/SKIP/Search UP
■ or TUNING/SKIP/Search
DOWN ■ button to select the
desired AM or FM station.
6
4
5
2
1
For an enhanced Bass sound,
press the X-BASS button ■.
Adjust the VOLUME ■ as
desired.
Select the desired preset number Press the MEMORY/CLOCK ADJ
(up to 10) by repeatedly pressing button again to set the preset.
the REPEAT/MEM-UP button.
Repeat steps 2 through 4 to set
more presets.
7
Select the desired preset number
(up to 10 each band) by
repeatedly
pressing
the
REPEAT/MEM-UP button.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 8
PLAYING COMPACT DISCS
NORMAL PLAYBACK
1
2
3
1
2
Press the POWER ON/OFF Open the CD compartment lid by Insert a disc, label side up, into
button ■ to turn the unit on.
Press the CD Function button ■
to select the CD mode.
pressing
OPEN/CLOSE area.
the
CD
Door the compartment. Press the CD
Door OPEN/CLOSE area to close
the CD compartment lid; the total
tracks and playing time will
appear in the display.
4
5
6
2
1
For an enhanced Bass sound, When the disc is through playing,
Press the PLAY/PAUSE (
)
press the X-BASS button ■. it will stop. Press the STOP
button to begin playback; the
current track and elapsed playing
time will appear in the display.
(■)/BAND button to stop the disc
Adjust the VOLUME ■ as
before it is finished.
desired.
NOTES:
7
• If a disc is inserted incorrectly, dirty, damaged or not present at all, ”no
dISC” will appear in the display.
• As each track is played, the track number and playing time is shown in
the display.
• To prevent damage to the disc, never open the CD door while the disc is
rotating. Wait for the disc to stop before opening the CD door. Never
touch the lens when the CD compartment door is open.
• DO NOT use the carrying handle when playing a CD. The CD should
only be used on a steady surface.
Press the POWER ON/OFF
button to turn the CD off.
• This unit will play 3” CD singles, no adapter is needed.
• The maximum playing time is 74 minutes.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 9
CD PAUSE CONTROL
1
2
During CD playback, if you wish to
pause the disc momentarily, press
Press the PLAY/PAUSE (
button again to release pause and
)
the PLAY/PAUSE (
) button. resume normal CD playback. The
Playback stops but the disc sound returns and the time stops
continues to spin and the time blinking.
blinks in the display.
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
1
2
1
2
After you insert the disc into the When the desired track number
CD player and the total number of appears in the display, press the
tracks and playing time appear on
the display, you may press the
TUNING/SKIP/Search UP ■ or
DOWN ■ button to select a
specific track for playback.
PLAY/PAUSE (
back will begin on the track you
selected.
) button. Play-
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH
1
2
3
During playback, press and hold
either the TUNING/SKIP/Search
UP ■ or DOWN ■ button to move
the player forward or backward
within a track to locate a specific
musical passage. The player will
move forward or backward at high
speed as long as the buttons are
depressed. When you release the
TUNING/SKIP/Search UP ■ or
DOWN ■ button, normal playback
will resume.
During playback, press the During playback, press
the
TUNING/SKIP/Search UP button TUNING/SKIP/Search DOWN button
once to advance the player to the once to move the player back to the
beginning of the next track. Press beginning of the playing track. Press
the TUNING/SKIP/Search UP the TUNING/SKIP/Search DOWN
button repeatedly to advance the button repeatedly to move the player
player to higher numbered tracks. back to lower numbered tracks.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 10
TO REPEATEDLY PLAY BACK ONE TRACK/ALL TRACKS
1
2
3
1
2
1
2
To repeat a single track, press the
REPEAT/MEM-UP button ■ once
while in the Stop mode; REPEAT
will blink in the display. Press the
TUNING/SKIP/Search UP ■ or
DOWN ■ button to select the
specific track that you wish to
repeat. When the desired track
number appears in the display,
To repeat all of the tracks on a To cancel Repeat Playback,
disc continuously, press the press the REPEAT/MEM-UP
REPEAT/MEM-UP button ■ twice button until the Repeat indicator
disappears from the display.
while in the Stop mode; REPEAT
will appear in the display. Press
the PLAY/PAUSE (
) button ■
to begin playback; all the tracks
on the CD will repeat
continuously.
press the PLAY/PAUSE (
)
button ■ to begin playback. The
specific track you selected will be
repeated continuously. You can
press the REPEAT/MEM-UP button
■ once during playback to repeat
the current track continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
2
3
1
2
Press the POWER ON/OFF Open the CD compartment lid by Press the MEMORY/CLOCK ADJ
button ■ to turn the unit on.
Press the CD Function button ■
to select the CD mode.
pressing the CD Door OPEN/ button; “P-01” (Program Number)
CLOSE area and insert your disc and “1” (track number) will appear
in the CD player. Close the CD and “MEMORY” will blink in the
compartment door.
display.
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 11
4
5
6
1
3
2
1
3
2
Press the TUNING/SKIP/Search After programming up to 20 tracks When the last programmed track
has been played, the player will
stop. To begin the programmed
playback again, press the
MEMORY/CLOCK ADJ button ■ ,
UP ■ or DOWN ■ button to select in the CD Program Memory, press
the PLAY/PAUSE (
) button to
the first track that you wish to
program. When the desired track
number (Example: Track 5)
appears in the display, press the
MEMORY/CLOCK ADJ button ■
begin programmed playback;
“MEMORY” will appear in the
display and playback will begin on
the first track that you
programmed. The player will
continue to play all of the tracks
that you programmed in the order
in which you programmed them.
then the PLAY/PAUSE (
)
button ■ to begin programmed
playback again. To cancel the
Programmed Playback mode,
press the MEMORY/CLOCK ADJ
button ■ (while in the Stop mode)
to enter the Program mode and
then press the STOP (■)/BAND
button ■ to cancel.
again.
Then
press
the
TUNING/SKIP/Search UP ■ or
DOWN ■ button repeatedly to
select a second track, the display
will then show, “P-02” indicating
program 2 is ready to be set.
NOTES ON PROGRAMMED PLAYBACK:
•
You can review the program by pressing the MEMORY/CLOCK ADJ button repeatedly when playback is
stopped.
•
You can change tracks in a program by simply selecting the desired track using the MEMORY/CLOCK ADJ
button, and then use the TUNING/SKIP/Search UP or DOWN button to change it and press the
MEMORY/CLOCK ADJ button again to confirm.
•
•
Press the STOP (■)/BAND button to stop the program before it is finished.
You can skip through the program while it is playing using the TUNING/SKIP/Search UP or DOWN button.
PROGRAMMED REPEAT
1
2
3
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First,
program the tracks you wish to
hear in the order you wish to hear
them, as described on the
previous page. Then, press the
Press the REPEAT/MEM-UP Programmed Repeat operation
button twice; both indicators will will continue indefinitely until you
appear in the display. The player press the STOP (■)/BAND
will play the tracks you selected in
the order in which you
programmed them. When the last
track in the program has been
played, the entire program will
begin again.
button, or turn the unit off.
PLAY/PAUSE (
) button to
begin program playback.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 12
SETTING THE TIMER
Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows :
1
2
3
1
2
2
1
3
2
Within a few seconds, “TIMER” will
light in the display to indicate that
the timer is set. When the actual
time matches the time set for the
Timer, the unit will turn on to the
last function (CD or tuner) used.
TO TURN THE TIMER OFF AND
SET IT FOR THE NEXT DAY,
press the POWER ON/OFF button
■.
TO TURN THE TIMER OFF SO IT
IS NOT SET FOR THE NEXT DAY,
press and hold the TIMER/SLEEP
button ■ again until “TIMER”
disappears from the display.
With the power off, press and Press the TUNING/SKIP/Search
hold the TIMER/SLEEP button ■ UP ■ or DOWN ■ button to set
until “TIMER” blinks in the the hour, then press the
display. Immediately press and MEMORY/CLOCK ADJ button ■
hold the MEMORY/CLOCK ADJ
button ■ until the hours blink in
the display.
again; the minute digits will blink.
Press the TUNING/SKIP/Search
UP ■ or DOWN ■ button to set
the minutes, then press the
MEMORY/CLOCK ADJ button ■
again.
The unit will revert back to standby mode one hour after the timer has been activated.
ACTIVATING THE SLEEP FUNCTION
Set the sleep timer as follows:
1
2
3
Press the TIMER/SLEEP button a
second time to set the unit to turn
off after 80 minutes. Each
additional press with decrease the
sleep time by 10 minutes. After five
seconds the sleep timer is set,
“SLEEP” will appear in the display,
you can press the TIMER/SLEEP
button at any time to stop the Sleep
function; “SLEEP” will disappear
from the display.
Press the POWER ON/OFF button Press the TIMER/SLEEP button
to turn the unit on and tune the and “90” will appear and “SLEEP”
desired radio station or insert a will blink in the display.
CD as previously instructed.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 13
CARE AND MAINTENANCE
Caring for Compact Discs
• Treat the disc carefully. Handle the compact disc only by its
edges. Never allow your fingers to come in contact with the
shiny, unprinted side of the compact disc.
• Do not attach adhesive tape, stickers, etc. to the compact
disc label.
• Clean the compact disc periodically with a soft, lint-free, dry
cloth. Never use detergents or abrasive cleaners to clean
the compact disc. If necessary, use a CD cleaning kit.
• If a compact disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged
(scratched).
• When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer
edge of the compact disc. Never wipe in circular motions.
Z
• This unit is designed to play only compact discs bearing the identification logo as shown here.
Other discs may not conform to the CD standard and may not play properly.
• Compact Discs should be stored in their cases after each use to avoid damage.
• Do not expose compact discs to direct sunlight, high humidity, high temperatures, or dust, etc. Prolonged
exposure or extreme temperatures can warp the disc.
• Do not stick or write anything on either side of the disc. Sharp writing instruments, or the ink may damage
the surface.
Cleaning the unit
• To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
• The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution
when cleaning and wiping the plastic parts.
• Mild soap and a damp cloth may be used on the front panel.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 14
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service.
Symptom
Radio
Possible Cause
Solution
Noise or sound distorted
on radio broadcasts.
Station not tuned properly for
AM or FM.
Retune the AM or FM broadcast
station.
FM: Telescopic antenna is not
properly adjusted.
Reorient FM telescopic antenna.
AM: Unit is not positioned
correctly.
Rotate unit until best reception is
obtained.
AM or FM, no sound.
RADIO Function button not pressed.
Volume at minimum.
Press the RADIO Function button.
Increase volume.
Compact Disc Player
CD Player will not play.
CD Function button not pressed.
Press the CD Function button.
Insert CD with label side up.
CD is not installed or installed
upside-down.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
General
No sound.
Power cord disconnected.
Connect power cord.
No batteries, or weak, dead or
inserted incorrectly.
Insert fresh batteries correctly.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE
AT WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT
1-800-919-3647
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED
TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3223.QXD 3/3/03 9:53 AM Page 15
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|