MEADE INSTRUCTION MANUAL
70mm | 2.8" Altazimuth Refracting Telescope
NG-70SM
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Your telescope is an excellent beginner’s
instrument, and is designed to observe
objects in the sky and also on land. It can be
your personal window on the universe or
allows you to intimately study the behavior of
nesting birds on a distant hillside.
Setting up your telescope involves these
simple steps:
1
• Assemble your tripod
• Adjusting the tripod
• Attach the optical tube to the mount
• Attach the red dot viewfinder
• Attach the diagonal mirror and eyepiece
• Balancing the optical tube
The telescope is shipped with the following
parts:
• Align the red dot viewfinder
Study the the picture on the next page and
become acquainted with the parts of your
telescope. Then proceed to “Assemble
your Tripod.”
• Optical tube
• Steel tube tripod with an accessory tray
• Two 1.25" eyepieces: MH25mm (28X),
MH9mm (78X)
• Diagonal mirror
• Red dot viewfinder with bracket
• Telescope mount with slow
motion controls
The tube has a focal length of 700mm, and
its objective lens has a diameter of 70mm.
The lens diameter is one of the most
important pieces of information about the
telescope. The size of the objective lens
determines how much detail you will be able
to see in your telescope. The focal length will
help later on to calculate magnification.
Download from Www.Somanuals.com. All Manuals Search And Download.
Inset A
Figure 1: Meade NG-70SM Altazimuth Refracting Telescope
FIGURE 1
Inset A:
Inset B:
Inset C:
Red Dot Viewfinder Assembly
Altazimuth or Azimuth Mount
Tripod Legs and Accessory Tray
2
1. Eyepiece
2. Red dot viewfinder (see Inset A)
3. Red dot viewfinder alignment screws
(see Inset A)
4. Optical tube assembly
5. Vertical slow motion control
6. Base/tripod head
Inset B
7. Tripod legs
8. Leg brace supports (See Inset C)
9. Leg brace (See Inset C)
10. Tripod leg nuts and bolts
11. Optical tube lock knobs
12. Horizontal slow motion control (See Inset B)
13. Diagonal mirror
14. Objective lens cell
15. Focuser drawtube
16. Telescope mount
17. Accessory tray (Inset C)
18. Red dot viewfinder bracket (see Inset A)
19. Adjustable sliding leg extension (see Inset C)
20. Tripod leg lock (see Inset C)
21. Dew shield/lens shade
22. Front lens cap (removed)
23. Focusing knob
Inset C
(Not visible)
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLE YOUR TRIPOD
ADJUSTING THE TRIPOD
ATTACH THE RED DOT VIEWFINDER
An eyepiece (1) has a narrow field
The tripod is the basic support for your
telescope and is shipped with the tripod head
and legs unattached.
Now that the tripod has been assembled,
the tripod height can be adjusted so that you
can view comfortably.
Fig. 3
3
of view. A
viewfinder
Note: Number in brackets, eg., [3], refer
to Fig. 1.
(2) has a wider
field of view,
which makes it
easier to locate
1. Spread the legs out evenly apart.
2. To set the height of the tripod, unlock the
tripod leg lock knob [20].
3. Slide the leg [19] in or out to the desired
length.
4. Tighten the leg lock knob [20] until firm.
3. Repeat for the other two legs.
1. Attach the 3 steel tripod legs [7] to the
tripod head [6] with the 3 leg locks [20]
facing inward. Three 1-11/16” long bolts
are provided for this purpose. Once the
tripod head and legs are connected,
spread the tripod legs evenly apart.
objects. The red
dot viewfinder
has a red dot to
make it easier to line up more precisely with
a target.
1. Slide the red dot viewfinder (2) into the
mounting bracket as shown in Fig. 3.
Note: To detach the red dot viewfinder, slide
the bracket out.
(SEE FIG. 2).
ATTACH THE OPTICAL TUBE TO THE MOUNT
Fig. 2
2. Attach the leg
braces [9] to the
leg brace
The optical tube gathers distant light which
is focused in the eyepiece.
1. Remove the two lock knobs (11) from the
optical tube.
2. Slide the optical tube [4] onto the
mounting bracket from the front end of
the mounting bracket.
supports [8]
using the three
provided 1-1/4”
long bolts and
the wing nuts.
ATTACH THE DIAGONAL MIRROR
AND EYEPIECE
The diagonal mirror reflects the light from
the optical tube to a more comfortable
viewing position.
3. Thread the lock knob [11] into the
3. Place the round accessory tray into the
hole in the center of the leg braces [9] and
spin the tray clockwise to thread the tray
into the hole. Tighten until firm.
mounting bracket and tighten until firm.
1. Slide the diagonal mirror (13) into the
focuser drawtube(15).
2. Tighten the drawtube thumbscrew to hold
the diagonal mirror securely.
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 4
3. Slide the MH 25mm eyepiece (1) into
diagonal mirror (13).
4. Tighten the diagonal mirror
thumbscrew to hold the eyepiece
securely.
(3) until the red dot is precisely over the
same object as you centered in the
eyepiece.
4
4. Check this alignment at night on a
celestial object, such as the Moon or
a bright star, and use the viewfinder’s
alignment screws to make any
necessary refinements.
BALANCING THE OPTICAL TUBE
The telescope is designed with a bracket that
will allow the user to balance the optical
tube. This may be needed when heavier
eyepieces or accessories are used.
1. Loosen the optical tube locks [11] so the
tube will slide in the mounting bracket.
2. Balance the tube by sliding it back and
forth in the bracket until you find a position
where the tube remains horizontal (i.e.,
without tipping up or down).
TO MOVE THE TELESCOPE
ALIGN THE RED DOT VIEWFINDER
Your telescope is altazimuth mounted.
Altazimuth is just a complicated way of
saying that your telescope moves up and
down and from side to side. Other
telescopes may be mounted in
Perform the first part of this procedure
during the daytime and the last step at night.
1. Point the telescope at an easy-to-find
land object such as the top of a telephone
pole or a distant mountain or tower. Look
through the eyepiece in the diagonal
mirror and turn the focuser knob (23)
until the image is sharply focused. Center
the object precisely in the eyepiece’s field
of view.
2. Turn on the red dot viewfinder using the
switch on the side of the finder.
3. Without moving the telescope, look
through the red dot viewfinder. Turn one or
more of the viewfinder’s alignment screws
3. Retighten the optical tube lock knobs to a
firm feel (SEE FIG. 4).
Note: If the horizontal and/or vertical
movement of the optical tube seems to be too
loose or too tight, you can adjust the amount
of tension in the movement of the tube to suit
your own preferences. See ADJUSTING THE
HORIZONTAL AND VERTICAL TENSION OF
THE OPTICAL TUBE, page 13.
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
different ways.
SUN WARNING
NEVER USE YOUR TELESCOPE
TO LOOK AT THE SUN!
OBSERVING
1. To move the telescope to an object, simply
move the telescope tube in the horizontal
and/or vertical plane until it is centered in
the red dot viewfinder. The object will now
be in the eyepiece of the telescope.
2. Once an object is found, you can then use
the slow motion controls [5,12] to make
smooth and precise movements as you
follow (or “track”) an object as it moves in
the eyepiece.
5
Observe during the daytime: Try out
your telescope during the daytime at
first. It is easier to learn how it operates and
how to observe when it is light.
LOOKING AT OR NEAR THE SUN WILL CAUSE
INSTANT AND IRREVERSIBLE DAMAGE TO YOUR
EYE. EYE DAMAGE IS OFTEN PAINLESS, SO THERE
IS NO WARNING TO THE OBSERVER THAT DAMAGE
HAS OCCURRED UNTIL IT IS TOO LATE. DO NOT
POINT THE TELESCOPE OR ITS VIEWFINDER AT OR
NEAR THE SUN. DO NOT LOOK THROUGH THE
TELESCOPE OR ITS VIEWFINDER AS IT IS MOVING.
CHILDREN SHOULD ALWAYS HAVE ADULT
Pick out an easy object to observe: A distant
mountain, a large tree, a lighthouse or
skyscraper make excellent targets. Point the
optical tube so it lines up with your object.
Use the red dot viewfinder: If you have not
done so, align the viewfinder (2) with the
telescope’s eyepiece (1) as described earlier.
Look through the viewfinder until you can
see the object. It will be easier to locate an
You will enjoy your telescope even more as
you learn more about it. But don’t be scared
off by difficult terms or complicated
procedures. Don’t panic! Just relax and enjoy
your scope.
SUPERVISION WHILE OBSERVING.
in the universe are, but that’s OK. Just point
and observe at first.
You will begin to grow and learn more about
astronomy the more you observe. Go to the
library and read some books about the stars
and planets. Read about astronomers of
old. Many of them had telescope no bigger
than the one you are using right now.
Galileo, who is one of the first astronomers
to use a telescope, discovered four of the
moons of Jupiter with a telescope about the
same size as yours (and his didn’t even
focus very well!).
THE MOST IMPORTANT RULE
We have one very important rule that
you should always follow when using
your telescope:
THE MEADE 4M COMMUNITY
You haven’t just bought a telescope, you have embarked
on an astronomy adventure that never ends. Share the
journey with others by accepting your free membership
in the 4M community of astronomers.
Have Fun!
Have a good time when you’re observing. You
may not know everything that there is to
know about a telescope or what all the sights
today.
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
object using the viewfinder rather than
locating with the eyepiece. Line up the
object with the viewfinder's red dot.
Practice using the slow motion controls
(5,12) to move the telescope. These can
come in very handy, especially when you
wish to move the telescope in very small
(fine control) steps.
Use a neutral density filter (often called a
“moon filter”) when observing the Moon.
Neutral density filters are available from
Meade as an optional accessory and
enhance contrast to improve your
6
Look through the eyepiece: Once you have
the object lined up in the viewfinder, look
through the optical tube’s eyepiece. If you
have aligned your viewfinder, you will you
see the object in your eyepiece.
observation of lunar features.
Observe the Moon: When you feel
comfortable with the viewfinder, the
eyepieces, and the adjustment controls, you
will be ready to try out the telescope at
night. The Moon is the best object to observe
the first time you go out at night. Pick a
night when the Moon is a crescent. No
shadows are seen during a full Moon,
making it appear flat and uninteresting.
Spend several nights observing the Moon.
Some nights, the Moon is so bright that it
makes other objects in the sky difficult to
see. These are nights that are excellent for
lunar observation.
Focus: Look through the eyepiece and
practice focusing on the object you have
chosen.
Try out the slow motion adjustment controls:
Observe the Solar System: After observing
the Moon, you are ready to step up to the
next level of observation, the planets.
There are four planets that you can easily
observe in your telescope: Venus, Mars,
Jupiter and Saturn.
TOO MUCH POWER?
Look for different features on the Moon. The
most obvious features are craters. In fact
you can see craters within craters. Some
craters have bright lines about them. These
are called rays and are the result of material
thrown out of the crater when it was struck
by a colliding object. The dark areas on the
Moon are called maria and are composed of
lava from the period when the Moon still had
volcanic activity. You can also see mountain
ranges and fault lines on the Moon.
Can you ever have too much power? If the type of
power you’re referring to is eyepiece magnification,
yes you can! The most common mistake of the
beginning observer is to “overpower” a telescope
by using high magnifications which the telescope’s
aperture and atmospheric conditions cannot
reasonably support. Keep in mind that a smaller,
but bright and well-resolved image is far superior
to one that is larger, but dim and poorly resolved.
Powers above 400x should be employed only under
the steadiest atmospheric conditions.
Eight planets (maybe more!) travel in a fairly
circular pattern around our Sun. Any system
of planets orbiting one or more stars is
called a solar system. Our Sun, by the way,
is a single, yellow dwarf star. It is average as
far as stars go and is a middle aged star.
Beyond the planets are clouds of comets, icy
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 5
moons appear in different positions
around the Jovian sky. This is
sometimes called the Galilean dance.
On any given night, you might be able
to see the shadow of a moon on the face of
Jupiter, see one moon eclipse another or
even see a moon emerge from behind
Jupiter’s giant disk. Drawing the positions of
the moons each night is an excellent
exercise for novice astronomers.
Any small telescope can see the four
Galilean moons of Jupiter (Fig. 5), plus a few
others, but how many moons does Jupiter
actually have? No one knows for sure! Nor
are we sure how many Saturn has either. At
last count, Jupiter had over 60 moons, and
planetoids and other debris left over from
the birth of our sun. Recently astronomers
have found large objects in this area and
they may increase the number of planets in
our solar system.
7
The four planets closest to the Sun are rocky
and are called the inner planets. Mercury,
Venus, Earth and Mars comprise the inner
planets. Venus and Mars can be easily seen
in your telescope.
sometimes called gas giants. If they had
grown much bigger, they may have become
stars.
Venus is seen before dawn or after sunset,
because it is close to the Sun. You can
observe Venus going through crescent
phases. But you cannot see any surface
detail on Venus because it has a very thick
atmosphere of gas.
Jupiter is quite interesting to observe. You
can see bands across the face of Jupiter. The
more time you spend observing these bands,
the more detail you will be able to see.
When Mars is close to the Earth, you can see
some details on Mars, and sometimes even
Mars’ polar caps. But quite often, Mars is
further away and just appears as a red dot
with some dark lines crisscrossing it.
Jupiter, Saturn, Uranus, and Neptune
comprise the outer planets. These planets,
are made mostly of gases and are
One of the most fascinating sights of Jupiter
are its moons. The four largest moons are
called the Galilean moons, after the
astronomer Galileo, who observed them for
the first time. If you’ve never watched the
Galilean moons in your telescope before,
you’re missing a real treat! Each night, the
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
held a small lead over Saturn. Most of
these moons are very small and can
only be seen with very large telescopes.
cannot be seen from Earth at all—the
Voyager spacecraft discovered the ring after
it passed Jupiter and looked back at it. It
turns out, only with the sunlight shining
through them, can the rings be seen. Uranus
and Neptune also have faint rings.
that they burn at.
8
Other stars to look for are multiple stars.
Very often, you can find double (or binary)
stars, stars that are very close together.
These stars orbit each other. What do you
notice about these stars? Are they different
colors? Does one seem brighter than
the other?
Probably the most memorable sight you will
see in your telescope is Saturn. Although you
may not see many features on the surface of
Saturn, its ring structure will steal your
breath away. You will probably be able to see
a black opening in the rings, known as the
Cassini band.
Optional color filters help bring out detail
and contrast of the planets. Meade offers a
line of inexpensive color filters.
Almost all the stars you can see in the sky
are part of our galaxy. A galaxy is a large
grouping of stars, containing millions or
even billions of stars. Some galaxies form a
spiral (like our galaxy, the Milky Way) and
other galaxies look more like a large football
and are called elliptical galaxies. There are
many galaxies that are irregularly shaped
and are thought to have been pulled apart
because they passed too close to—or even
through—a larger galaxy.
What’s Next? Beyond the Solar System:
Once you have observed our own system of
planets, it’s time to really travel far from
home and look at stars and other objects.
Saturn is not the only planet that has rings,
but it is the only set of rings that can be
seen with a small telescope. Jupiter’s rings
You can observe thousands of stars with
your telescope. At first, you may think stars
are just pinpoints of light and aren’t very
interesting. But look again. There is much
information that is revealed in stars.
The first thing you will notice is that not all
stars are the same colors. See if you can find
blue, orange, yellow, white and red stars.
The color of stars sometimes can tell you
about the age of a star and the temperature
You may be able to see the Andromeda
galaxy and several others in your telescope.
They will appear as small, fuzzy clouds. Only
very large telescope will reveal spiral or
elliptical details.
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
Moon and planets. If the image become
fuzzy, switch back down to a lower
power. Changing eyepieces changes the
power or magnification of your
telescope.
exercise for drawing is to observe the moons
of Jupiter every night or so. Try to make
Jupiter and the moons approximately the
same size as they look in your eyepiece. You
will see that the moons are in a different
position every night. As you get better at
drawing, try more challenging sights, like a
crater system on the moon or even a nebula.
You will also be able to see some nebulas
with your scope. Nebula means cloud. Most
nebulas are clouds of gas. The two easiest to
see in the Northern Hemisphere are the
Orion nebula during the winter and the
Triffid nebula during the summer. These are
large clouds of gas in which new stars are
being born. Some nebulas are the remains
of stars exploding. These explosions are
called supernovas.
9
By the way, you might have noticed
something strange when you looked through
your eyepiece. Although the image is right-
side up, it is reversed. That means reading
words can be a problem. But it has no affect
on astronomical objects. If you wish to have
a fully corrected image, check out Meade’s
optional Erecting Prism in the Optional
Accessory section.
Go your library or check out the internet for
more information about astronomy. Learn
about the basics: light years, orbits, star
colors, how stars and planets are formed,
red shift, the big bang, what are the different
kinds of nebula, what are comets, asteroids
and meteors and what is a black hole. The
more you learn about astronomy, the more
fun, and the more rewarding your telescope
will become.
When you become an advanced observer you
can look for other types of objects such as
asteroids, planetary nebula and globular
clusters. And if you’re lucky, every so often a
bright comet appears in the sky, presenting
an unforgettable sight.
Meade offers a complete line of eyepieces
for your telescope. Most astronomers have
four or five low-power and high power
eyepieces to view different objects and to
cope with different viewing conditions.
The more you learn about objects in the
sky, the more you will learn to appreciate
the sights you see in your telescope. Start
a notebook and write down the observations
you make each night. Note the time and
the date.
Use a compass to make a circle, or trace
around the lid of a jar. Draw what you see in
your eyepiece inside the circle. The best
SOME OBSERVING TIPS
Eyepieces: Always begin your observations
using the 25mm low-power eyepiece. The
25mm eyepiece delivers a bright, wide field
of view and is the best to use for most
viewing conditions. Use the high-power 9mm
eyepiece to view details when observing the
Objects move in the eyepiece: If you are
observing an astronomical object (the Moon,
a planet, star, etc.) you will notice that the
object will begin to move slowly through the
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
telescopic field of view. This movement
is caused by the rotation of the Earth
and makes an object move through the
telescope’s field of view. To keep
Viewing through windows: Avoid setting up
the telescope inside a room and observing
through an opened or closed window pane.
Images may appear blurred or distorted due
to temperature differences between inside
and outside air. Also, it is a good idea to
allow your telescope to reach the ambient
(surrounding) outside temperature before
starting an observing session.
of the field and, without touching the
telescope, watch it drift through the field to
the other side before repositioning the
telescope so that the object to be viewed is
again placed at the edge of the field, ready to
be further observed.
10
astronomical objects centered in the field,
simply move the telescope on one or both of
its axes—vertically and/or horizontally as
needed—try using the telescopes coarse and
fine adjustment controls. At higher powers,
astronomical objects will seem to move
through the field of view of the eyepiece
more rapidly.
Vibrations: Avoid touching the eyepiece
while observing through the telescope.
Vibrations resulting from such contact will
cause the image to move. Avoid observing
sites where vibrations cause image
movement (for example, near railroad
tracks). Viewing from the upper floors of a
building may also cause image movement.
When to observe: Planets and other
objects viewed low on the horizon often lack
sharpness—the same object, when observed
higher in the sky, will appear sharper and
have greater contrast. Try reducing power
(change your eyepiece) if your image is fuzzy
or shimmers. Keep in mind that a bright,
clear, but smaller image is more interesting
than a larger, dimmer, fuzzy one. Using too
high a power eyepiece is one of the most
common mistakes made by new
Place the object to be viewed at the edge
STAR CHARTS
Let your eyes “dark-adapt”: Allow five or ten
minutes for your eyes to become “dark
adapted” before observing. Use a red-
filtered flashlight to protect your night vision
when reading star maps, or inspecting the
telescope. Do not use use a regular flash-
light or turn on other lights when observing
with a group of other astronomers. You can
make your own red filtered flashlight by
taping red cellophane over a flashlight lens.
Star charts and planispheres are useful for a variety of
reasons. In particular, they are a great aid in planning a
night of celestial viewing.
Astronomy and Sky and Telescope magazines print star
charts each month for up-to-the-minute maps of the
heavens.
astronomers.
AutoStar Suite™ Astronomer Edition Software on DVD
will help you learn the night sky. It displays more than
10,000 celestial objects including planets, stars,
galaxies, and nebulae. You can print out star charts and
even plan your observing sessions. It operates on any
Windows® based PC.
Dress Warm: Even on summer nights, the
air can feel cool or cold as the night wears
on. It is important to dress warm or to have
a sweater, jacket, gloves, etc., nearby.
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
the ratio, the faster exposure time is
needed when a camera is hooked up to
the telescope. Your telescope has
slower focal ratio at f/10.
Sometimes, astronomers use focal reducers
to make slow exposure telescopes have
faster focal ratios.
Altaz mounting simply means your telescope
moves up and down (altitude or “alt”), and
side to side, (azimuth or “az”). Other
mounting configurations are available for
other telescopes, such as equatorial
mounting.
Know your observing site: If possible, know
the location where you will be observing. Pay
attention to holes in the ground and other
obstacles. Is it a location where wild
animals, such as skunks, snakes, etc.,
may appear? Are there viewing obstructions
such as tall trees, street lights, headlights
and so forth? The best locations are dark
locations, the darker the better. Deep space
objects are easiest to see under dark skies.
But it is still possible to observe even in
a city.
Optical tube focal length . . . . . . . . . 700mm
Objective lens diameter . . . . . . 70mm (2.8")
Focal ratio . . . . . . . . . . . . . . . . . . . . . . . . f/10
Mounting type . . . . . . . . . . . . . . . Altazimuth
What do the specifications mean?
Optical tube focal length is simply a
measurement of the length of the optical
tube. In other words, this is the distance
light travels in the telescope before being
brought to focus in you eyepiece. Your tube is
700mm long.
11
Objective lens diameter is how big the
lens is on your scope. Telescopes are
always described by how large their
objective lens is. Your telescope is 70mm
or 2.8 inches. Other telescopes are 90mm,
8 inches, 16 inches, or even 3 feet in
diameter. The Hubble Telescope’s objective
lens has a diameter of 2.4 meters (that’s
7.8 feet across!).
Surf the Web and visit your local library: The
internet contains a huge amount of
astronomical information, both for children
and adults. Check out astronomy books from
your library. Look for star charts—these are
available on a monthly basis in Astronomy
and Sky and Telescope magazines.
ASTRONOMY RESOURCES
•
•
The Meade 4M Community
27 Hubble, Irvine, CA 92618
Astronomical League
Executive Secretary
5675 Real del Norte, Las Cruces, NM 88012
The Astronomical Society of the Pacific
390 Ashton Avenue, San Francisco, CA 94112
The Planetary Society
65 North Catalina Avenue, Pasadena, CA 91106
International Dark-Sky Association, Inc.
3225 N. First Avenue, Tucson, AZ 85719-2103
•
•
•
HAVE A GOOD TIME,
ASTRONOMY IS FUN!
The focal ratio helps determine how fast the
photographic speed of a telescope is. The
lower the focal ratio number, the faster the
exposure. f/5 is faster than f/10. The faster
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
USE THE SPECIFICATIONS TO
CALCULATE THE MAGNIFICATION OF
YOUR EYEPIECE
Focal Length of the Telescope
TAKING CARE OF YOUR TELESCOPE
÷
Your telescope is a precision optical
instrument designed for a lifetime of
rewarding viewing. It will rarely, if ever,
require factory servicing or maintenance.
Follow these guidelines to keep your
telescope in the best condition:
12
Focal Length of the Eyepiece
=
The power of a telescope is how much
Magnification
it magnifies objects. Your 25mm eyepiece
magnifies an object 28 times. Your 9mm
eyepiece magnifies objects 78 times.
But if you obtain other eyepieces, you can
calculate how much magnification they have
with your telescope. Just divide the focal
length of the telescope by the focal length of
the eyepiece.
Look at the specifications. You will see that
the focal length of your scope is 700mm.
Let’s say that you have obtained a 13mm
eyepiece. You can tell that what the focal
length of your eyepiece is as it is always
printed on the side of an eyepiece. Divide:
700 ÷ 13, which equals 53.8. Round this
off to the nearest whole number and your
new eyepiece magnifies objects 54 times.
• Avoid cleaning the telescope’s lenses. A
little dust on the front surface of the
telescope’s correcting lens will not cause
loss of image quality.
JOIN AN ASTRONOMY CLUB, ATTEND A STAR PARTY
One of the best ways to increase your knowledge of
astronomy is to join an astronomy club. Check your local
newspaper, school, library, or telescope dealer/ store to
find out if there’s a club in your area.
Its worth repeating: Keep in mind that a
bright, clear, but smaller image is more
interesting than a larger, dimmer, fuzzy one.
Using too high a power eyepiece is one of
the most common mistakes made by new
astronomers. So don’t think that higher
magnification is necessarily better—quite
often the best view is with lower
Many groups also hold regularly scheduled Star Parties
at which you can check out and observe with many
different telescopes and other pieces of astronomical
equipment. Magazines such as Sky and Telescope and
Astronomy print schedules for many popular Star Parties
around the United States and Canada.
magnification value!
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
biodegradable dishwashing soap per pint
of solution. Use soft, white facial tissues
and make short, gentle strokes. Change
tissues often.
Fig. 7
. Check the amount of tension by
moving the bracket up and down before
reattaching the optical tube.
Horizontal
adjustment
nut
13
CAUTION: Do not use scented or lotioned
tissues or damage could result to the optics.
DO NOT use a commercial photographic
lens cleaner.
OPTIONAL ACCESSORIES
#928 45° Erecting Prism (1.25 O.D.):
Correctly orients the telescopic image
during terrestrial observing and yields an
image position at a 45° angle to the main
telescope tube, resulting in a more
comfortable observing position in
ADJUSTING THE HORIZONTAL AND
VERTICAL TENSION OF THE OPTICAL TUBE
If the horizontal and/or vertical movement of
the optical tube seems to be too loose or too
tight, you can adjust the amount of tension in
the movement of the optical tube to suit your
own preference. To adjust the horizontal
tension of the optical tube, use an adjustable
wrench or nut driver to tighten or loosen the
horizontal adjustment nut located under the
base of the telescope. See Fig. 6.
To adjust the vertical tension of the optical
tube, first loosen the attachment knobs (11)
and remove the optical tube from the bracket.
Use an adjustable wrench or nut driver to
tighten or loosen the vertical adjustment nut
located on the inner side of the bracket. See
Fig. 6: Horizontal adjustment nut. (View
of the underside of the base.)
• When absolutely necessary, dust on the
front lens should be removed with very
gentle strokes of a camel hair brush or
blown off with an ear syringe (available at
most pharmacies).
• Fingerprints and organic materials on the
front lens may be removed with a solution
of 3 parts distilled water to 1 part isopropyl
alcohol. You may also add 1 drop of
Vertical
adjustment
nut
Fig. 7: Vertical adjustment nut. (Bracket
shown with optical
tube removed.)
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
most cases.
issues can be resolved by telephone,
avoiding return of the telescope to the
factory.
3233. Each returned part or product must
include a written statement detailing the
nature of the claimed defect, as well as the
owner’s name, address, and phone number.
14
Additional Eyepieces (1.25" barrel
diameter): For higher or lower
magnifications with the telescopes that
accommodate 1.25" eyepieces, Meade
Series 4000 Super Plössl eyepieces,
available in a wide variety of sizes, provide a
high level of image resolution and color
correction at an economical price. Contact
your Meade Dealer or see the Meade
catalog for more information. Visit us on the
MEADE LIMITED WARRANTY
This warranty is not valid in cases where the
product has been abused or mishandled,
where unauthorized repairs have been
attempted or performed, or where
depreciation of the product is due to normal
wear-and-tear. Meade specifically disclaims
special, indirect, or consequential damages
or lost profit which may result from a breach
of this warranty. Any implied warranties
Every Meade telescope and telescope
accessory is warranted by Meade
Instruments Corporation (“Meade”) to be
free of defects in materials and
workmanship for a period of ONE YEAR from
the date of original purchase in the U.S.A.
Meade will repair or replace a product, or
part thereof, found by Meade to be defective,
provided the defective part is returned to
Meade, freight-prepaid, with proof of
purchase. This warranty applies to the
original purchaser only and is non-
transferable. Meade products purchased
outside North America are not included in
this warranty, but are covered under
separate warranties issued by Meade
international distributors.
MEADE CONSUMER SOLUTIONS
If you have a question concerning your
telescope, call Meade Instruments
SURF THE WEB
Consumer Solutions Department at
(800) 626-3233. Consumer Solutions
Departmant hours are 7:00AM to 5:00PM,
Pacific Time, Monday through Friday. Call
the Meade Consumer Solutions Department
first, before returning the telescope to the
factory, giving full particulars as to the
nature of the problem, as well as your
name, address, and daytime telephone
number. The great majority of servicing
•
•
•
•
•
•
The Meade 4M Community:
Sky & Telescope:
Astronomy:
Astronomy Picture of the Day:
Photographic Atlas of the Moon:
Hubble Space Telescope Public Pictures:
RGA Number Required: Prior to the return of
any product or part, a Return Goods
Authorization (RGA) number must be
obtained from Meade by calling (800) 626-
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
which cannot be disclaimed are hereby
limited to a term of one year from the date
of original retail purchase.
This warranty gives you specific rights. You
may have other rights which vary from state
to state.
Meade reserves the right to change product
specifications or to discontinue products
without notice.
This warranty supersedes all previous
Meade product warranties.
©2009 MEADE INSTRUMENTS CORPORATION
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun. Do not look through the telescope as it is moving.
Download from Www.Somanuals.com. All Manuals Search And Download.
OBSERVATION LOG
OBSERVER:
OBJECT NAME:
DATE & TIME OBSERVED:
CONSTELLATION:
EYEPIECE SIZE:
SEEING CONDITIONS:
NOTES:
EXCELLENT
GOOD
POOR
DRAWING OF IMAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
OBSERVATION LOG
OBSERVER:
OBJECT NAME:
DATE & TIME OBSERVED:
CONSTELLATION:
EYEPIECE SIZE:
SEEING CONDITIONS:
NOTES:
EXCELLENT
GOOD
POOR
DRAWING OF IMAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
OBSERVATION LOG
OBSERVER:
OBJECT NAME:
DATE & TIME OBSERVED:
CONSTELLATION:
EYEPIECE SIZE:
SEEING CONDITIONS:
NOTES:
EXCELLENT
GOOD
POOR
DRAWING OF IMAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
OBSERVATION LOG
OBSERVER:
OBJECT NAME:
DATE & TIME OBSERVED:
CONSTELLATION:
EYEPIECE SIZE:
SEEING CONDITIONS:
NOTES:
EXCELLENT
GOOD
POOR
DRAWING OF IMAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
OBSERVATION LOG
OBSERVER:
OBJECT NAME:
DATE & TIME OBSERVED:
CONSTELLATION:
EYEPIECE SIZE:
SEEING CONDITIONS:
NOTES:
EXCELLENT
GOOD
POOR
DRAWING OF IMAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Meade Instruments Corporation
27 Hubble, Irvine, California
1-800
50-08034
Download from Www.Somanuals.com. All Manuals Search And Download.
|