| Tranquility Stones Kit   Installation Instructions   Model: TQS36   for use on Gas Fireplace Models:   DVBR36RN* (GFCN3J0)   C US   * The Tranquility Stones may also be used if the unit is converted to propane   CAUTION: This kit is designed for use on   the above gas fireplace models ONLY.   Glass   Frame   CAUTION: This kit must be installed by a   qualified service technician.   Fireplace   Front   Read the instructions carefully before beginning   the installation.   CAUTION: Allow the unit to cool complete-   ly if it has been in operation.   Clamps   Kit contents: Stone tray, stones (30), ceramic overlay,   hardware package, installation instructions.   Glass   Panel   Check the contents of the carton with contents list. If   any parts are missing or damaged, contact your dealer.   Glass   Panel   Pull   Clamp   Hook   Turn OFF gas supply and electric supply to the unit   before beginning.   Installation Instructions   G584-501   1. Remove valve cover. (Fig. 1)   Fig. 2 Remove glass frame.   2. Release the two (2) clamps at the bottom of the   window frame by pulling back on the clamp handles.   (Fig. 2)   Screw   Burner   Grate   3. Lift off the glass frame. (Fig. 2)   Screw   4. Remove the logs and any ember material from the   fireplace. Discard logs and ember material.   5. Remove the two (2) screws securing the grate. Re-   move the grate and reinstall the two (2) screws. (Fig.   3) Discard grate.   Hearth Panels   Front of Fireplace   Valve Cover   H100   Fig. 1 Remove grate.   6. If there is any lava rock on the hearth panels,   remove and set aside. Remove and discard hearth   panels.   7. Install the stone tray in the fireplace. The two (2)   small holes on the right side back of the assembly fit   over the two (2) studs on the rear log support. (Figs.   4 & 5)   Valve   Pins   8. Secure the stone tray in position with the two (2)   nuts and one (1) screw provided. (Fig. 5)   Locating Holes   G584-500   9. Replace any lava rock removed from the fireplace.   Fig. 1 Remove valve cover.   20012963 3/08 Rev. 2   Download from Www.Somanuals.com. All Manuals Search And Download.   Place Stone 1   KT941   Place Stone 2   KT942   Place Stone 3   KT943   20012693   3 Download from Www.Somanuals.com. All Manuals Search And Download.   Place Stone 4   KT944   Place Stone 5   KT945   Place Stone 6   KT946   20012693   4 Download from Www.Somanuals.com. All Manuals Search And Download.   KT898   Fig. 7 Tranquility stones’ flame appearance.   12. Reinstall the glass frame.   13. Turn the gas supply ON and light the pilot. Turn   valve to the “ON” position.   14. Reinstall valve cover.   15. Turn the electric power ON.   16. Turn fireplace on following lighting instructions in   Homeowner’s Manual. Compare flame height to   that shown in Figure 8. Check to see the flames are   not touching the stones. If the flames impinge on   the stones, turn the unit off, allow to cool and follow   Steps 1 to 3. Adjust the stones and follow Steps 12   to 14.   Tranquility Stone installation complete.   20012693   5 Download from Www.Somanuals.com. All Manuals Search And Download.   1 2 3 CFM Corporation reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time,   without notice.   Tranquility Stones   (GATA4S0)   Ref. Description   1. Stone Tray   Part No.   20012565   20013081   20013053   2. Ceramic Overlay   3. Stones - pkg (6)   20012693   6 Download from Www.Somanuals.com. All Manuals Search And Download.   20012693   7 Download from Www.Somanuals.com. All Manuals Search And Download.   CFM Corporation   2695 Meadowvale Blvd. • Mississauga, Ontario, Canada L5N 8A3   Download from Www.Somanuals.com. All Manuals Search And Download.   |