HeartH products
KIts aNd accessorIes
SYMMETRY SERIES ANDIRON KIT
INSTALLATION INSTRUCTIONS FOR The ANDIRON kIT
FOR USe wITh SYMMeTRY SeRIeS GAS FIRepLACeS
Symmetry Series Andiron kits
Catalog
Number Number
Traditional Andrion
Model
Andirons
AkT-DV
AkC-DV
h7410
h7411
Traditional - AkT-DV
Corinth - AkC-DV
kIT CONTeNTS
2 - andirons, 4 - attaching screws and these instructions.
TOOLS NeeDeD - phillips Head screwdriver.
INSTALLATION INSTRUCTIONS
Sub-Floor holes
Attaching Bracket And Screw
Step 1. Follow the procedure "turning off Gas to unit", located on
the Lighting Instructions pullout labels in the control compartment of
the unit and in the Installation Instructions (p/N 506023-08) provided
with the appliance.
Figure 1
Step 2. refer to the appliance care and operations Instructions (p/N
506025-01) to remove the front glass enclosure panel and gain ac-
cess to the firebox interior.
Step 3. align the holes on the andiron brackets, with the holes
on the fireplace sub-floor and attach the andiron with the provided
attaching screws (see Figure 1 ). It is recommended that two (2)
screws be used for each andiron, however one (1) screw may be
used, depending on placement of the andiron.
Step 4. place all Lava rock and rockwool according to the appliance
care and operation Instructions (p/N 506025-01).
Step 5. refer to the appliance care and operations Instructions (p/N
506025-01) and re-install the front glass enclosure panel.
Note: dIaGraMs & ILLustratIoNs Not to scaLe.
the manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
consult your local distributor for fireplace code information.
printed in u.s.a. © 2009 by Lennox Hearth products
Lhp
1110 west Taft Avenue • Orange, CA 92865
p/N 506019-43 ReV. N/C 05/2009
Download from Www.Somanuals.com. All Manuals Search And Download.
|