Troubleshooting
•If the weather station does not show the outdoor temperature after
three minutes, open the battery cover of the outdoor transmitter to
reveal the TX button. Push down on the TX button for three seconds to
send a wireless signal to the weather station.
•Hold the HEAT/DEW button for three seconds so the weather station
searches again for the outdoor transmitter.
•If the outdoor temperature does not show up after a second attempt,
remove the A/C power adapter and all batteries from both units and
start the setup process again.
Wireless Color Weather Station
Model: S84193 | Quick Setup Guide
La Crosse Technology® introduces a Wireless Color Weather Station
that provides precise, real-time weather data straight from your
backyard. New—Monitor forecast and temperature trends and set
high/low temperature alerts. Animated color forecasts react to changing
barometric pressure. Monitor in/out temperature and humidity with daily
min/max records—all on one easy-to-read display with adjustable
brightness. Wireless transmission range of over 200 feet (60 meters) in
open air, from transmitter to weather station.
•For optimal 433 MHz signal reception, the outdoor transmitter should
be placed within 200 feet (60 meters) from the indoor weather station.
Buttons
Wireless Color Weather Station
Program Menu
The TIME SET button will move through the program menu. To change
a value use the ARROW buttons.
•WWVB ON/OFF: Hold the TIME SET button five seconds so WWVB
and the word ON will flash. Press and release either ARROW button to
turn this to OFF if you do not wish WWVB time reception. Confirm with
the TIME SET button and move to time zone.
•TIME ZONE: EST will flash. Press and release the ARROW buttons to
select a different Time Zone: AST=Atlantic, EST= Eastern, CST=
Central, MST= Mountain, PST= Pacific, AKT= Alaska, HAT=Hawaiian
time zone. Confirm with the TIME SET button and move to DST.
•DAYLIGHT SAVING TIME: DST will flash and the word ON. Press and
release the ARROW buttons to turn this to OFF if you do not observe
DST. Confirm with the TIME SET button and move to 12/24 hour time.
•12/24 HOUR TIME: 12H will flash. Press and release the ARROW
buttons to select 24H. Confirm with the TIME SET button and move to
the hour.
•HOUR: The hour will flash. Press and release the ARROW buttons to
select the correct hour. Confirm with the TIME SET button and move to
the minutes.
•MINUTES: The minutes will flash. Press and release the ARROW
buttons to adjust the minutes. Confirm with the TIME SET button and
move to the year.
•YEAR: The year will flash. Press and release the ARROW buttons to
select the correct year. Confirm with the TIME SET button and move to
the month.
Setup Instructions Step-by-Step
STEP 1:
• Insert the 5-volt A/C power adapter into the
designated area on the weather station.
• Insert the A/C power adapter into a wall outlet for
continuous backlight (ON/OFF), and dimmer
feature.
•MONTH: The month will flash. Press and release the ARROW buttons
to select the correct month. Confirm with the TIME SET button and
move to the date.
•DATE: The date will flash. Press and release the ARROW buttons to
select the correct date. Confirm with the TIME SET button and move to
F/C.
Note: The Day of the Week will set automatically when the year, month
and date are set.
•FAHRENHEIT/CELSIUS: °F will flash. Press and release the ARROW
buttons to select Fahrenheit or Celsius. Confirm with the TIME SET
button and exit.
STEP 2: (optional battery operation)
• Remove battery cover from the weather
station: Slide tab left and pull out to remove the cover.
• Insert 3 NEW AAA batteries (not included)
into the back of the weather station. Observe
the correct polarity (see marking inside the
battery compartment).
• The weather station will light up and show,
indoor temperature, humidity and time.
•
(Press and release the HI/LOW/OFF button to illuminate the backlight
for 10 seconds when using only battery power.)
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
•
•
Alarm Set
•ALARM HOUR: Hold ALARM button for three seconds to enter alarm
setting mode. The alarm hour will flash. Use the ARROW buttons to
set the hour. Press and release the ALARM button.
•ALARM MINUTE: The alarm minutes will flash. Use the ARROW
buttons to set the minutes. Press the ALARM button to exit.
STEP 3:
• Ensure that the transmitter is within 10 feet of the
weather station.
• Remove battery cover from transmitter: Slide the battery
cover down and lift off the front.
• Insert 2 NEW AA batteries (not included) into the
TX141TH-B transmitter. Observe the correct polarity.
• Within 3 minutes, the weather station will show readings
in the Outdoor temperature area on the LCD.
Alarm Activate/Deactivate
•Press and release the ALARM button once to show Alarm Time.
•Press and release the ALARM button repeatedly to activate
or deactivate the alarm.
Note: Use Alkaline batteries (or Lithium for temperatures below - 20°F /-
28.8°C).
•The alarm icon appears when alarm is activated.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
INDOOR LOW alert will flash. Press the ARROW buttons to choose
the value, and press the ALERT button to confirm and exit.
Note: After selecting temperature alert values use the next step to turn
individual alerts ON or OFF.
Free standing: Simply pull out the stand from the back of
the weather station and place on a flat surface.
Position:
•
Choose a location 6 feet or more from electronics such
as cordless phones, gaming systems, televisions,
microwaves, routers, baby monitors, etc., which can prevent signal
reception.
Arm/Disarm Temperature Alerts
In normal time mode, press and release the ALERT button to
toggle between:
•
•
•
•
Place within range of the outdoor transmitters. The maximum
transmitting range in open air is 200-feet (60 meters).
Be aware of electrical wires and plumbing within a wall. This will
interfere with signal reception.
Obstacles such as walls, windows, stucco, concrete, and large
metal objects can reduce the range.
For best WWVB reception, place with the front or back facing
Colorado, near and exterior wall.
Press the UP ARROW button to turn the selected alert ON. The
alert icon appears when each alarm is activated.
Press the DOWN ARROW button to turn the selected alert OFF.
Position the Outdoor Transmitter
Temperature Alert Sounds
Once the weather station shows the outdoor temperature/humidity,
place it and the transmitter in the desired locations and wait
approximately 1-hour before permanently mounting the transmitter to
ensure that there is proper reception. The transmitter should be
mounted vertically, in a shaded, protected area, at least 6 feet from the
ground to avoid damage and ensure accurate readings. The transmitter
is water resistant, not waterproof and should not be placed anywhere it
will become submerged in water or subject to standing water or snow.
Wireless transmitting range in open air is over 200-feet (60 meters)
from outdoor transmitter to weather station.
When temperature alert sounds, the corresponding alert icon will
flash.
The alert beeps once every minute, until the temperature is out of
alert range.
Press any button to stop alert. The alert symbol
will still show.
Turn alert OFF: In normal mode, hold and release the ALERT button
to select the alert to turn off. With HI or LO alert selected, press the
DOWN ARROW button to turn that alert OFF.
Option 1:
Temperature/Humidity Trend Indicators
• Install one mounting screw (not included) into a wall leaving
approximately ½ of an inch (12.7mm) extended.
• Place the transmitter onto the screw, using the hanging
hole on the backside.
• Gently pull the transmitter down to lock the screw into
place.
The indoor and outdoor temperature trend indicators will update every
30 minutes or less. These trends represent temperature changes over
the past three hours.
Temperature rose more than 2°F /1°C in the past three hours.
Humidity rose more than 3% RH in the past three hours
Option 2:
• Insert the mounting screw (not included) through the
front of the transmitter and into the wall.
• Tighten the screw to snug (do not over tighten).
Temperature has not changed more than 2°F /1°C in the
past three hours. Humidity has not changed more than 3%
RH in the past three hours.
To achieve a true temperature/humidity reading, mount where direct
sunlight cannot reach the outdoor transmitter. Mount the outdoor
transmitter on a North-facing wall or in any well shaded area. Under an
eave or deck rail work well. The maximum transmitting range in open air
is over 200-feet (60 meters). Obstacles such as walls, windows, stucco,
concrete, and large metal objects can reduce the range. Place the
transmitter at least 6 feet in the air to improve signal transmission.
Temperature fell more than 2°F /1°C in the past three hours.
Humidity fell more than 3% RH in the past three hours
Humidity trend indicator
Care and Maintenance
Forecast Trend Indicators
•
•
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
The forecast tendency indicators in the lower left corner of the forecast
display indicate the rising or falling pressure trend.
•
•
Do not expose the weather station to extreme temperatures, vibration
or shock.
Clean weather station with a soft damp cloth. Do not use solvents or
scouring agents.
The product is not a toy. Keep it out of reach of children.
The product is not to be used for medical purpose or for public
information. It is for home use only.
•
•
The up trending arrow indicates the pressure is rising and the
weather is improving.
The down trending arrow indicates the
pressure is falling and the weather may
worsen.
•
•
•
The right arrow indicates the pressure is steady.
•
•
The specifications of this product may change without prior notice.
Improper use or unauthorized opening of housing will void the
warranty.
Position the Weather Station
•
If the unit does not work properly, change the batteries and/or check
the A/C cord connection.
The weather station is free standing with the fold out base stand or can
be wall mounted.
Low Battery
Wall mounted:
•
Fix three screws (not included) into the
desired wall, leaving the head extended
about 0.2 inches (5mm).
•When this low battery icon
appears in the indoor (IN) reading
section, replace the batteries in the weather station.
•
Hang the weather station onto the screws.
Ensure that it locks into place before
releasing the weather station.
•When this low battery icon
section, replace the batteries in the outdoor transmitter.
appears in the outdoor (OUT) readings
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR
DAMAGES ASSOCIATED WITH THE OPERATION OR
MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE
USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.
THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S
REACH.
Specifications
Indoor Temperature Range:
Humidity Range:
+32°F to +122°F (0°C to + 50°C)
19%-97% (RH)
Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C)
Humidity Range:
Distance:
19%-97% (RH)
Over 200 ft. (60 meters)
RF 433MHz (open air)
This warranty gives you specific legal rights. You may also have other
rights specific to the State. Some States do not allow the exclusion of
consequential or incidental damages therefore the above exclusion of
limitation may not apply to you.
Power Requirements
Weather Station:
5-volt A/C power adapter (included)
Optional 3-AA, IEC, LR6 batteries
(not included)
For warranty work, technical support, or information contact:
TX141TH-B Transmitter:
Battery Life TX141TH-B:
2-AA, IEC, LR6 batteries (not included).
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Battery life is over 1 year when using
reputable battery brands for both Alkaline
and Lithium batteries
Use Alkaline batteries for temps:
-20ºF to 140ºF (-29ºC to 60ºC)
Use Lithium batteries for temps:
-40ºF to -20ºF (-40ºC to -29ºC)
The complete instruction manual is available
Weather Station
Battery Life:
Battery life is over 3 years with A/C adapter
in use
Dimensions:
Weather Station:
8.34” L x 1.03” W x 5.48” H
(211.836 x 26.162 x 139.192mm)
2.4” L x 1.3” W x 3.78” H
(64 x 36 x 101mm)
TX141TH-B:
Contact Support:
1-608-782-1610
Warranty Information
Product Registration:
Protected under U.S. Patents:
5,978,738
La Crosse Technology, Ltd provides a 1-year limited warranty on this
product against manufacturing defects in materials and workmanship.
6,076,044
6,597,990
This limited warranty begins on the original date of purchase, is valid
only on products purchased and used in North America and only to the
original purchaser of this product. To receive warranty service, the
purchaser must contact La Crosse Technology, Ltd for problem
determination and service procedures. Warranty service can only be
performed by a La Crosse Technology, Ltd authorized service center.
The original dated bill of sale must be presented upon request as proof
of purchase to La Crosse Technology, Ltd or La Crosse Technology,
Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our
option and at no charge as stipulated herein, with new or reconditioned
parts or products if found to be defective during the limited warranty
period specified above. All replaced parts and products become the
property of La Crosse Technology, Ltd and must be returned to La
Crosse Technology, Ltd. Replacement parts and products assume the
remaining original warranty, or ninety (90) days, whichever is longer. La
Crosse Technology, Ltd will pay all expenses for labor and materials for
all repairs covered by this warranty. If necessary repairs are not
covered by this warranty, or if a product is examined which is not in
need or repair, you will be charged for the repairs or examination. The
owner must pay any shipping charges incurred in getting the La Crosse
Technology, Ltd product to a La Crosse Technology, Ltd authorized
service center. La Crosse Technology, Ltd will pay ground return
shipping charges to the owner of the product to a USA address only.
FCC Statement
This Device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) the device must accept any interference
received, including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER AUTHORITY TO OPERATE THE
EQUIPMENT
All rights reserved. This handbook must not be reproduced in any form,
even in excerpts, or duplicated or processed using electronic,
mechanical or chemical procedures without written permission of the
publisher.
This handbook may contain mistakes and printing errors. The
information in this handbook is regularly checked and corrections made
in the next issue. We accept no liability for technical mistakes or printing
errors, or their consequences.
The La Crosse Technology, Ltd warranty covers all defects in material
and workmanship with the following specified exceptions: (1) damage
caused by accident, unreasonable use or neglect (including the lack of
reasonable and necessary maintenance); (2) damage occurring during
shipment (claims must be presented to the carrier); (3) damage to, or
deterioration of, any accessory or decorative surface; (4) damage
resulting from failure to follow instructions contained in the owner’s
manual; (5) damage resulting from the performance of repairs or
alterations by someone other than an authorized La Crosse Technology,
Ltd authorized service center; (6) units used for other than home use (7)
applications and uses that this product was not intended or (8) the
products inability to receive a signal due to any source of interference..
This warranty covers only actual defects within the product itself, and
does not cover the cost of installation or removal from a fixed
installation, normal set-up or adjustments, claims based on
Printed in China
misrepresentation by the seller or performance variations resulting from
installation-related circumstances.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|