| 	
		 owner’s manual   
					6.50-inch (165 mm) 3-Way Component System   
					Thank you for choosing a JL Audio Evolution™ C5 Component System   
					for your automotive sound system.   
					These Evolution™ Speakers have been designed and manufactured to   
					exacting standards in order to ensure years of musical enjoyment in your   
					vehicle. For maximum performance, we highly recommend that you   
					have your new speakers installed by an authorized JL Audio dealer. Your   
					authorized dealer has the training, expertise and installation equipment   
					to ensure optimum performance from this product. Should you   
					decide to install the speakers yourself, please take the time   
					to read this manual thoroughly so as to familiarize yourself   
					with its installation requirements and setup procedures.   
					If you have any questions regarding the instructions in this   
					manual or any aspect of your amplifier’s operation, please contact your   
					authorized JL Audio dealer for assistance. If you need further assistance,   
					please call the JL Audio Technical Support Department   
					at (954) 443-1165 during business hours.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				C5-653 speCifiCations:   
					Woofers: Cast Alloy Frame, Patented Elevated Frame Cooling   
					(U.S. Patent #6,219,431 & #6,229,902), DMA-Optimized Motor   
					System, Mineral-Filled Polypropylene Cone, Butyl Rubber   
					Surround, 1-in. / 25 mm Voice Coil, Kapton® Former, Low-   
					Profile, Symmetrical Roll Spider, Ferrite Magnet   
					Included Components and Parts:   
					B 
					• Two C5-650cw 6.50-inch (165 mm) Woofers   
					• Two C5-400cw 4.0-inch (100 mm) Midrange Drivers   
					• Two C5-075ct 0.75-inch (19 mm) Tweeters   
					• Two C5-653-XO Crossover Networks   
					D 
					E 
					F 
					9,   
					A 
					• Two Flush-Mount Tweeter Fixtures   
					Midrange Drivers: DMA-Optimized Motor System, Mineral-   
					Filled Polypropylene Cone, Butyl Rubber Surround, 1-in. / 25   
					mm Voice Coil, Kapton® Former, Low-Profile, Symmetrical Roll   
					Spider, Ferrite Magnet   
					• Two Surface-Mount Tweeter Fixtures   
					• Two Metal Spring Clips for Flush-Mount Tweeter Fixtures   
					• Two Metal Woofer Grilles with ABS Grille Trays   
					• Two Metal Midrange Grilles with ABS Grille Trays   
					• Two ABS Midrange Frame Adaptors and Flush-Mount Rings   
					• Four Self-Adhesive JL Audio Nameplates for Grilles   
					• Butyl Adhesive Putty for Woofer Grilles   
					• Twenty #8 x 1.25 inch (32 mm) Sheet Metal Screws   
					• Sixteen #8 Mounting Clips   
					C 
					woofer physical Dimensions   
					frame outer Diameter (a)   
					6.52 in. / 165.5 mm   
					6.76 in. / 171.7 mm   
					3.54 in. / 90.0 mm   
					0.98 in. / 24.9 mm   
					5.56 in. / 141.2 mm   
					2.54 in. / 64.6 mm   
					Tweeters: 0.75 in. / 19 mm Silk Soft Dome   
					Grille tray outer Diameter (B)   
					magnet outer Diameter (C)   
					frontal Grille protrusion (D)   
					mounting Hole Diameter (e)   
					mounting Depth (f)   
					RSR Variable-Angle Flush-Mount System, Ferrofluid Cooling   
					and Damping, Neodymium Magnet   
					Crossover Networks: 3-way network with 2nd order   
					low-pass, 2nd order bandpass and 2nd order high-pass circuit,   
					premium capacitors and inductors, 4-position adjustable   
					tweeter output level, 3-position midrange presence control,   
					Polyswitch tweeter protection   
					• Eight #6 x 1.25 inch (32 mm) Sheet Metal Screws   
					• Eight #6 Mounting Clips   
					• Two 1.18-inch (30 mm) Machine Screws   
					• Four #6 x 1-inch (25 mm) Sheet Metal Screws   
					• Sixteen Crimpable Spade Connectors   
					• Four 6.4 mm Female Crimpable Connectors   
					• Six 4.7 mm Female Crimpable Connectors   
					• Two 2.8 mm Female Crimpable Connectors   
					• Four 2.8 mm Male Crimpable Connectors   
					Continuous Power Handling: 75 Watts (RMS Method)   
					Peak Music Power: 225 Watts   
					Recommended Power Range: 25-150 Watts (RMS)   
					Frequency Response: 48 Hz - 25 KHz ( 3 dB)   
					Efficiency @ 1W/1m: 89.5 dB @ 1W/1m   
					Nominal Impedance: 4 ohms   
					midrange physical Dimensions   
					frame outer Diameter (a)*   
					Grille tray outer Diameter (B)   
					magnet outer Diameter (C)   
					frontal Grille protrusion (D)   
					mounting Hole Diameter (e)   
					mounting Depth (f)   
					3.94 in. / 100.0 mm   
					4.76 in. / 121.0 mm   
					2.83 in. / 72.0 mm   
					0.83 in. / 21.1 mm   
					3.625 in. / 92.1 mm   
					1.62 in. / 41.1 mm   
					*Does not take into account Mounting Tabs   
					A 
					C 
					A 
					D 
					D 
					C 
					A 
					B 
					B 
					tweeter fixture physical Dimensions   
					fixture outer Diameter (a)   
					flush-mount   
					1.75 in. / 44.5 mm   
					1.50 in. / 38.1 mm   
					0.56 in. / 14.2 mm   
					0.36 in. / 9.1 mm   
					surface-mount   
					1.61 in. / 40.9 mm   
					N/A   
					Crossover network physical Dimensions   
					Height (a)   
					width (B)   
					Depth (C)   
					5.86 in. / 148.9 mm   
					4.17 in. / 105.8 mm   
					1.68 in. / 42.8 mm   
					fixture mounting Hole Diameter (B)   
					fixture mounting Depth (C)   
					N/A   
					tweeter frontal protrusion (D)   
					0.87 in. / 22.1 mm   
					Due to ongoing product development, all specifications are subject to change without notice.   
					Due to ongoing product development, all specifications are subject to change without notice.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					2 | JL Audio - C5-653 Owner’s Manual   
					3 
				GettinG starteD   
					tweeter proteCtion   
					aDJustaBle miDranGe presenCe   
					aDJustaBle tweeter leVel   
					•ꢀꢀTurnꢀoffꢀtheꢀaudioꢀsystem.ꢀItꢀisꢀalsoꢀ   
					advisableꢀtoꢀdisconnectꢀtheꢀnegativeꢀ(–)ꢀ   
					terminalꢀofꢀyourꢀvehicle’sꢀbatteryꢀwheneverꢀ   
					performingꢀinstallationꢀwork.   
					•ꢀꢀBeforeꢀcutting,ꢀdrillingꢀorꢀinsertingꢀanyꢀscrew,ꢀ   
					checkꢀclearancesꢀonꢀbothꢀsidesꢀofꢀtheꢀplannedꢀ   
					mountingꢀsurface.ꢀAlsoꢀcheckꢀforꢀanyꢀpotentialꢀ   
					obstacles,ꢀsuchꢀasꢀwindowꢀtracksꢀandꢀmotors,ꢀ   
					wiringꢀharnesses,ꢀetc.ꢀCheckꢀbothꢀsidesꢀofꢀtheꢀ   
					TheꢀC5ꢀcrossoverꢀnetworksꢀareꢀequippedꢀwithꢀ   
					anꢀadvancedꢀelectronicꢀtweeterꢀprotectionꢀcircuitꢀ   
					designedꢀtoꢀminimizeꢀtheꢀpossibilityꢀofꢀtweeterꢀ   
					failure.ꢀThisꢀelectronicꢀdeviceꢀmonitorsꢀcurrentꢀgoingꢀ   
					toꢀtheꢀtweeterꢀandꢀwillꢀdisconnectꢀtheꢀtweeterꢀfromꢀ   
					theꢀsignalꢀwhenꢀitꢀsensesꢀoverload.ꢀShouldꢀthisꢀoccurꢀ   
					whileꢀlisteningꢀtoꢀtheꢀaudioꢀsystem,ꢀsimplyꢀreduceꢀtheꢀ   
					volumeꢀforꢀaꢀfewꢀsecondsꢀandꢀtheꢀprotectionꢀcircuitꢀ   
					willꢀresetꢀitselfꢀautomatically.   
					YourꢀC5ꢀcrossoverꢀnetworksꢀprovideꢀaꢀuniqueꢀ   
					midrangeꢀpresenceꢀcontrol,ꢀlocatedꢀunderꢀtheꢀcover.ꢀ   
					Theꢀmidrangeꢀpresenceꢀisꢀselectableꢀviaꢀaꢀsetꢀofꢀpinsꢀ   
					andꢀallowsꢀforꢀthreeꢀsettings.ꢀTheseꢀsettingsꢀaffectꢀtheꢀ   
					amplitudeꢀofꢀtheꢀupperꢀmidrangeꢀresponseꢀofꢀtheꢀC5ꢀ   
					componentꢀwoofer.ꢀWeꢀrecommendꢀthatꢀyouꢀbeginꢀ   
					yourꢀlisteningꢀinꢀtheꢀ“REF”ꢀ(Reference)ꢀandꢀadjustꢀ   
					upꢀorꢀdownꢀasꢀneededꢀtoꢀcompensateꢀforꢀmountingꢀ   
					location,ꢀorientationꢀorꢀpersonalꢀtaste.   
					C5ꢀcrossoverꢀnetworksꢀalsoꢀprovideꢀfourꢀlevelsꢀ   
					ofꢀtweeterꢀadjustabilityꢀdesignedꢀtoꢀcompensateꢀforꢀ   
					differentꢀmountingꢀlocations,ꢀvehicleꢀinteriorsꢀandꢀ   
					personalꢀtaste.ꢀTheseꢀlevelsꢀareꢀselectableꢀviaꢀaꢀsetꢀofꢀ   
					pinsꢀlocatedꢀunderꢀtheꢀclearꢀcoverꢀofꢀeachꢀcrossoverꢀ   
					case.ꢀWeꢀrecommendꢀthatꢀyouꢀbeginꢀlisteningꢀinꢀtheꢀ   
					“REF”ꢀ(Reference)ꢀposition.ꢀToꢀfindꢀtheꢀoptimumꢀ   
					tonalꢀbalanceꢀinꢀyourꢀinstallation,ꢀexperimentꢀwithꢀ   
					alternateꢀtweeterꢀlevelꢀsettingsꢀbyꢀmovingꢀtheꢀpins.ꢀItꢀ   
					isꢀsafeꢀtoꢀswitchꢀjumpersꢀwhileꢀtheꢀsystemꢀisꢀplaying.   
					vehicle,ꢀmanyꢀvehiclesꢀareꢀnotꢀsymmetrical!   
					•ꢀꢀAlwaysꢀwearꢀprotectiveꢀeyewear.   
					CrossoVer networK aDJustment   
					Theꢀcrossoverꢀnetworksꢀhaveꢀbeenꢀdesignedꢀtoꢀ   
					allowꢀtonalꢀadjustmentsꢀtoꢀtheꢀupperꢀmidrangeꢀ   
					responseꢀandꢀtweeterꢀlevel.ꢀTheseꢀadjustmentsꢀmakeꢀ   
					itꢀpossibleꢀtoꢀfine-tuneꢀyourꢀsystemꢀtoꢀsuitꢀyourꢀ   
					listeningꢀpreferencesꢀandꢀtoꢀcompensateꢀforꢀvariousꢀ   
					speakerꢀmountingꢀapplications.ꢀ   
					CrossoVer networK installation   
					TheꢀcrossoverꢀnetworksꢀsuppliedꢀwithꢀyourꢀC5ꢀ   
					Systemꢀshouldꢀbeꢀinstalledꢀinꢀaꢀdryꢀlocationꢀinsideꢀ   
					yourꢀvehicle.ꢀDOꢀNOTꢀINSTALLꢀTHEMꢀINSIDEꢀOFꢀ   
					AꢀDOOR!ꢀDoorsꢀoftenꢀgetꢀwetꢀonꢀtheꢀinside,ꢀwhichꢀ   
					canꢀdamageꢀyourꢀcrossoverꢀnetworksꢀandꢀcouldꢀ   
					potentiallyꢀdamageꢀyourꢀentireꢀsoundꢀsystem.ꢀTheꢀ   
					crossoversꢀcanꢀbeꢀscrewedꢀintoꢀaꢀsolidꢀsurfaceꢀviaꢀtwoꢀ   
					holesꢀlocatedꢀunderꢀtheꢀprotectiveꢀcoverꢀofꢀtheꢀcase.ꢀ   
					Toꢀaccessꢀtheseꢀholes,ꢀsimplyꢀsqueezeꢀtheꢀsidesꢀofꢀtheꢀ   
					coverꢀwhileꢀgentlyꢀpullingꢀtheꢀcoverꢀawayꢀfromꢀtheꢀ   
					base.ꢀMakeꢀsureꢀthatꢀyourꢀmountingꢀlocationꢀwillꢀnotꢀ   
					causeꢀdamageꢀtoꢀwiring,ꢀfuelꢀlines,ꢀbrakeꢀlinesꢀorꢀanyꢀ   
					otherꢀvitalꢀcomponentꢀofꢀyourꢀvehicle.ꢀOnceꢀyouꢀhaveꢀ   
					screwedꢀtheꢀcaseꢀinꢀandꢀmadeꢀyourꢀconnections,ꢀsnapꢀ   
					theꢀprotectiveꢀcoverꢀbackꢀintoꢀplace.ꢀ   
					ꢀ 
					WARNING   
					!!   
					It is absolutely vital that your component system   
					is connected as shown in this manual. Failure to   
					connect the system as shown may result in damage to   
					your speakers which is NOT covered under warranty.   
					Red   
					Black   
					Do not substitute different crossover networks into   
					your C5 System. Do not use crossover networks   
					intended for different C5 models.   
					Ampliꢀer   
					Output   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					4 | JL Audio - C5-653 Owner’s Manual   
					5 
				speaKer plaCement ConsiDerations   
					Aꢀcomponentꢀsystemꢀgivesꢀyouꢀtheꢀabilityꢀtoꢀplaceꢀ   
					theꢀwoofer,ꢀmidrangeꢀandꢀtweeterꢀseparatelyꢀinꢀyourꢀ   
					vehicleꢀinterior.ꢀThisꢀcanꢀbeꢀgoodꢀorꢀbad,ꢀdependingꢀ   
					onꢀhowꢀit’sꢀdone.   
					DiaGram a: less DesiraBle speaKer plaCement   
					Avoidꢀplacingꢀtweetersꢀwhereꢀtheyꢀwillꢀbeꢀblockedꢀ   
					byꢀobjectsꢀinꢀtheꢀinteriorꢀofꢀtheꢀcarꢀ(includingꢀseatedꢀ   
					occupants).ꢀWhenꢀselectingꢀaꢀmountingꢀlocation,ꢀ   
					lookꢀatꢀbothꢀsidesꢀofꢀtheꢀcarꢀtoꢀmakeꢀsureꢀthatꢀthisꢀ   
					locationꢀisꢀclearꢀonꢀbothꢀsides.ꢀ   
					TheꢀC5-653ꢀsystemꢀhasꢀbeenꢀoptimizedꢀforꢀ   
					installationsꢀinꢀwhichꢀtheꢀmidrangeꢀandꢀtweeterꢀ   
					driversꢀforꢀeachꢀchannelꢀareꢀmountedꢀasꢀcloseꢀ   
					togetherꢀasꢀpossibleꢀonꢀtheꢀsameꢀmountingꢀplaneꢀ   
					(suchꢀasꢀaꢀkickꢀpanelꢀinstallationꢀasꢀillustratedꢀinꢀ   
					DiagramꢀB).ꢀThisꢀtypeꢀofꢀmountingꢀwillꢀresultꢀinꢀ   
					theꢀbestꢀtonalꢀbalanceꢀandꢀmostꢀcoherentꢀimaging.ꢀ   
					Theꢀcenterꢀtoꢀcenterꢀseparationꢀofꢀtheꢀmidrangeꢀandꢀ   
					tweeterꢀshouldꢀbeꢀbetweenꢀ3.5ꢀinchesꢀ(89mm)ꢀandꢀ   
					4ꢀinchesꢀ(102mm)ꢀAnyꢀseparationꢀgreaterꢀthanꢀ4ꢀ   
					inchesꢀ(102mm)ꢀfromꢀcenterꢀtoꢀcenterꢀofꢀeachꢀdriverꢀ   
					isꢀlikelyꢀtoꢀresultꢀinꢀdegradedꢀsoundꢀquality.ꢀWeꢀdoꢀ   
					notꢀrecommendꢀmountingꢀtheꢀtweetersꢀinꢀaꢀdifferentꢀ   
					locationꢀthanꢀtheꢀmidrangeꢀdriverꢀ(DiagramꢀA).   
					Theꢀ6.5ꢀinchꢀ(165mm)ꢀwoofersꢀwillꢀusuallyꢀbeꢀ   
					placedꢀintoꢀfactoryꢀspeakerꢀlocationsꢀandꢀcanꢀbeꢀ   
					separatedꢀfromꢀtheꢀmidrangeꢀandꢀtweeterꢀbyꢀasꢀ   
					muchꢀasꢀ18ꢀinchesꢀ(46ꢀcm),ꢀwithoutꢀdegradingꢀsoundꢀ   
					quality.ꢀForꢀproperꢀlow-frequencyꢀperformance,ꢀ   
					theꢀwoofersꢀneedꢀaꢀfairlyꢀlargeꢀairꢀspaceꢀbehindꢀ   
					themꢀ(likeꢀtheꢀairꢀinsideꢀofꢀaꢀdoor).ꢀEnclosingꢀtheꢀ   
					C5-650cwꢀwoofersꢀinꢀspacesꢀsmallerꢀthanꢀ1ꢀcu.ftꢀ   
					(28ꢀliters)ꢀisꢀnotꢀrecommendedꢀifꢀoptimumꢀlow-   
					frequencyꢀandꢀmidbassꢀperformanceꢀisꢀdesired.   
					Weꢀdoꢀnotꢀrecommendꢀmountingꢀtheꢀwooferꢀandꢀ   
					midrangeꢀintoꢀtheꢀsameꢀenclosedꢀenvironment,ꢀasꢀ   
					thisꢀwillꢀcauseꢀenergyꢀfromꢀtheꢀwooferꢀtoꢀmodulateꢀ   
					theꢀmidrangeꢀdriver,ꢀresultingꢀinꢀdistortionꢀandꢀ   
					colorationꢀofꢀtheꢀsound.ꢀIfꢀyouꢀareꢀmountingꢀtheꢀ   
					midsꢀandꢀwoofersꢀintoꢀtheꢀsameꢀenvironment,ꢀyouꢀ   
					willꢀneedꢀtoꢀsub-encloseꢀtheꢀmidrangeꢀspeakersꢀinꢀanꢀ   
					enclosureꢀwithꢀaꢀminimumꢀofꢀ0.08ꢀcu.ft.ꢀ(2.3ꢀliters).ꢀ   
					Thisꢀguidelineꢀalsoꢀappliesꢀtoꢀanyꢀotherꢀenclosedꢀ   
					applicationꢀofꢀtheꢀmidrangeꢀdriver:ꢀ   
					DiaGram B: more DesiraBle speaKer plaCement   
					Enclosuresꢀsmallerꢀthanꢀ0.08ꢀcu.ftꢀ(2.3ꢀliters)ꢀwillꢀ   
					alterꢀtheꢀfrequencyꢀresponseꢀofꢀtheꢀmidrangeꢀdriverꢀ   
					andꢀresultꢀinꢀdegradedꢀsoundꢀquality.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					6 | JL Audio - C5-653 Owner’s Manual   
					7 
				WARNING   
					!!   
					ꢀ 
					Custom location:ꢀRunꢀspeakerꢀwireꢀtoꢀtheꢀ   
					desiredꢀmountingꢀlocations.ꢀIfꢀyouꢀareꢀrunningꢀ   
					wiresꢀintoꢀaꢀdoor,ꢀuseꢀexistingꢀfactoryꢀwiringꢀbootsꢀ   
					wheneverꢀpossible.ꢀIfꢀyouꢀareꢀdrillingꢀnewꢀholes,ꢀfileꢀ   
					theirꢀedgesꢀandꢀinstallꢀrubberꢀgrommetsꢀintoꢀeachꢀ   
					hole.ꢀWiresꢀshouldꢀthenꢀbeꢀcoveredꢀwithꢀaꢀprotective,ꢀ   
					flexibleꢀPVCꢀsleeveꢀandꢀthenꢀrunꢀthroughꢀtheꢀdoorꢀ   
					jamb.ꢀMakeꢀsureꢀthatꢀtheꢀwiresꢀwillꢀclearꢀdoorꢀhingesꢀ   
					andꢀotherꢀstructuresꢀinꢀtheꢀdoor.ꢀIfꢀyouꢀareꢀunsureꢀ   
					aboutꢀanyꢀpartꢀofꢀthisꢀprocess,ꢀpleaseꢀcontactꢀyourꢀꢀ   
					JLꢀAudioꢀdealerꢀforꢀinstallationꢀhelp.   
					Selectꢀanꢀevenꢀsurface.ꢀTighteningꢀaꢀspeakerꢀontoꢀ   
					anꢀunevenꢀsurfaceꢀcanꢀdamageꢀit.ꢀCarefullyꢀmeasureꢀ   
					andꢀmarkꢀtheꢀ“mountingꢀholeꢀdiameter”ꢀoutlineꢀinꢀ   
					theꢀselectedꢀlocationꢀusingꢀtheꢀdimensionsꢀlistedꢀonꢀ   
					pageꢀ2.ꢀBeforeꢀdrillingꢀorꢀcuttingꢀonꢀyourꢀinteriorꢀ   
					panels,ꢀuseꢀaꢀutilityꢀknifeꢀtoꢀcutꢀanyꢀfabric,ꢀvinylꢀ   
					orꢀleatherꢀfromꢀholeꢀlocations.ꢀTheseꢀmaterialsꢀcanꢀ   
					easilyꢀbeꢀsnaggedꢀbyꢀaꢀdrillꢀorꢀaꢀsaw,ꢀcausingꢀdamageꢀ   
					toꢀtheꢀpanelꢀandꢀpossibleꢀbodilyꢀinjury.ꢀDrillꢀaꢀpilotꢀ   
					holeꢀinꢀtheꢀcenterꢀofꢀtheꢀproposedꢀspeakerꢀmountingꢀ   
					hole.ꢀThen,ꢀusingꢀaꢀsaberꢀsawꢀwithꢀanꢀappropriateꢀ   
					blade,ꢀmakeꢀtheꢀcircularꢀcutꢀoutꢀforꢀtheꢀspeaker.ꢀFileꢀ   
					anyꢀroughꢀedges.   
					DiaGram C: faCtory loCation woofer installation   
					Double check the clearance for both speakers   
					before proceeding. Many cars are different from   
					one side to the other!   
					woofer installation   
					Theꢀwoofersꢀshouldꢀbeꢀinstalledꢀinꢀoneꢀofꢀtheꢀ   
					followingꢀwaysꢀdependingꢀonꢀlocation:   
					ꢀ 
					factory location:ꢀIfꢀyouꢀwillꢀbeꢀusingꢀtheꢀfactoryꢀ   
					speakerꢀwires,ꢀitꢀmayꢀbeꢀnecessaryꢀtoꢀchangeꢀtheꢀ   
					terminations.ꢀThisꢀmayꢀbeꢀaccomplishedꢀbyꢀusingꢀ   
					anꢀadaptorꢀplugꢀorꢀsimplyꢀbyꢀcuttingꢀtheꢀfactoryꢀ   
					connectorꢀoffꢀandꢀusingꢀtheꢀsuppliedꢀcrimpꢀ   
					connectorsꢀtoꢀterminateꢀtheꢀspeakerꢀwires.ꢀTheꢀ   
					Optional   
					largeꢀconnectorꢀisꢀforꢀtheꢀpositiveꢀ( )ꢀterminalꢀandꢀ   
					+ 
					theꢀsmallꢀconnectorꢀisꢀforꢀtheꢀnegativeꢀ(–)ꢀterminalꢀ   
					ofꢀeachꢀwoofer.ꢀKeepꢀinꢀmindꢀthatꢀtheꢀwooferꢀwiresꢀ   
					mustꢀbeꢀconnectedꢀtoꢀtheꢀwooferꢀoutputsꢀofꢀtheꢀ   
					crossoversꢀsuppliedꢀwithꢀyourꢀsystemꢀasꢀshownꢀinꢀtheꢀ   
					diagramꢀonꢀpageꢀ5.ꢀIfꢀyouꢀpreferꢀtoꢀrunꢀnewꢀwires,ꢀ   
					referꢀtoꢀtheꢀ“CustomꢀLocation”ꢀinstallationꢀsectionꢀ   
					forꢀdetails.ꢀWhicheverꢀmethodꢀyouꢀchoose,ꢀobserveꢀ   
					correctꢀpolarityꢀinꢀyourꢀconnections.ꢀIfꢀyouꢀareꢀ   
					unsureꢀaboutꢀanyꢀofꢀtheseꢀissues,ꢀcontactꢀyourꢀꢀ   
					JLꢀAudioꢀdealerꢀforꢀinstallationꢀassistance.   
					Yourꢀnewꢀspeakersꢀhaveꢀbeenꢀdesignedꢀtoꢀinstall,ꢀ   
					withoutꢀmodifications,ꢀintoꢀmostꢀvehiclesꢀthatꢀacceptꢀ   
					aꢀ6.5-inchꢀ(160ꢀmm)ꢀspeaker.ꢀMostꢀfactoryꢀ6.5-inchꢀ   
					speakersꢀuseꢀfourꢀmountingꢀscrewsꢀwhichꢀwillꢀlineꢀupꢀ   
					withꢀtheꢀmountingꢀholesꢀonꢀyourꢀwoofers.ꢀ   
					DiaGram D: Custom loCation woofer installation   
					Afterꢀcuttingꢀtheꢀhole,ꢀcheckꢀtoꢀseeꢀthatꢀtheꢀ   
					speakerꢀframeꢀfitsꢀintoꢀitsꢀmountingꢀholeꢀcleanly.ꢀDoꢀ   
					notꢀforceꢀtheꢀframeꢀintoꢀaꢀholeꢀthatꢀisꢀtooꢀsmall.ꢀOnceꢀ   
					theꢀspeakerꢀisꢀinꢀplace,ꢀuseꢀtheꢀholesꢀonꢀtheꢀspeaker’sꢀ   
					mountingꢀflangeꢀtoꢀmarkꢀtheꢀpanelꢀwhereꢀtheꢀfourꢀ   
					mountingꢀscrewsꢀwillꢀbeꢀpositioned,ꢀasꢀshownꢀinꢀ   
					DiagramꢀD.ꢀRemoveꢀtheꢀspeakerꢀandꢀdrillꢀ1/8-inchꢀ   
					(3ꢀmm)ꢀholesꢀatꢀeachꢀmark.ꢀInsertꢀtheꢀmountingꢀ   
					clipsꢀwithꢀtheꢀflatꢀsideꢀtowardsꢀtheꢀspeaker.ꢀConnectꢀ   
					theꢀspeakerꢀwires,ꢀobservingꢀcorrectꢀpolarity,ꢀandꢀ   
					secureꢀtheꢀspeakerꢀandꢀgrilleꢀtrayꢀtoꢀtheꢀpanelꢀbyꢀ   
					evenlyꢀtighteningꢀbyꢀhandꢀtheꢀprovidedꢀ#8ꢀxꢀ1.25ꢀ   
					inchꢀ(32ꢀmm)ꢀmountingꢀscrews.ꢀMakeꢀsureꢀtheꢀ   
					wooferꢀisꢀsecuredꢀsoꢀthatꢀairꢀdoesꢀnotꢀleakꢀaroundꢀ   
					theꢀmountingꢀflange.ꢀAirꢀleaksꢀwillꢀcauseꢀaꢀsevereꢀ   
					degradationꢀinꢀsoundꢀquality.ꢀSealꢀanyꢀairꢀleaksꢀwithꢀ   
					anꢀautomotive-gradeꢀsealantꢀmaterial.   
					Itꢀisꢀabsolutelyꢀvitalꢀthatꢀtheꢀspeakerꢀframeꢀ   
					fitsꢀintoꢀtheꢀmountingꢀholeꢀcleanly.ꢀThisꢀmustꢀbeꢀ   
					checkedꢀpriorꢀtoꢀtighteningꢀtheꢀscrews.ꢀDoꢀnotꢀ   
					forceꢀtheꢀframeꢀintoꢀaꢀholeꢀthatꢀisꢀtooꢀsmall.ꢀDoꢀ   
					notꢀtightenꢀtheꢀspeakerꢀontoꢀanꢀunevenꢀsurface.ꢀ   
					Thisꢀwillꢀdamageꢀyourꢀspeakers.ꢀTheꢀspeakerꢀ   
					shouldꢀalsoꢀfitꢀsoꢀthatꢀairꢀdoesꢀnotꢀleakꢀaroundꢀ   
					theꢀmountingꢀflange.ꢀAirꢀleaksꢀwillꢀcauseꢀaꢀsevereꢀ   
					degradationꢀinꢀsoundꢀquality.ꢀSealꢀanyꢀairꢀleaksꢀ   
					withꢀanꢀautomotive-gradeꢀsealantꢀmaterial.   
					WARNING   
					!!   
					Hand-tighten the screws evenly in a criss-cross   
					pattern to avoid bending the speaker frame or   
					stripping the mounting clips.   
					Useꢀtheꢀsuppliedꢀmountingꢀclipsꢀunlessꢀtheꢀfactoryꢀ   
					holesꢀalreadyꢀfeatureꢀthreadedꢀinserts.ꢀꢀ   
					Hand-tightenꢀtheꢀscrewsꢀevenly.   
					Breakꢀoffꢀsmallꢀpiecesꢀofꢀtheꢀsuppliedꢀbutylꢀadhesiveꢀ   
					puttyꢀandꢀplaceꢀthemꢀonꢀtheꢀinsideꢀofꢀeachꢀgrilleꢀtray.ꢀ   
					Thisꢀadhesiveꢀwillꢀholdꢀtheꢀgrilleꢀmeshꢀinsertꢀinꢀplaceꢀ   
					firmlyꢀandꢀpreventꢀrattling.ꢀInsertꢀtheꢀgrilleꢀmeshꢀ   
					insertꢀintoꢀtheꢀgrilleꢀtray,ꢀsqueezingꢀgentlyꢀaroundꢀitsꢀ   
					edgeꢀuntilꢀitꢀseatsꢀfirmlyꢀintoꢀtheꢀtray.ꢀ   
					Finally,ꢀattachꢀtheꢀself-adhesiveꢀJLꢀAudioꢀlogoꢀ   
					badgeꢀtoꢀtheꢀgrilleꢀmeshꢀinsert.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					8 | JL Audio - C5-653 Owner’s Manual   
					9 
				WARNING   
					!!   
					ꢀ 
					DiaGram e: faCtory loCation woofer installation   
					Double check the clearance for both speakers   
					before proceeding. Many cars are different from   
					one side to the other!   
					coveredꢀwithꢀaꢀprotective,ꢀflexibleꢀPVCꢀsleeveꢀandꢀthenꢀ   
					runꢀthroughꢀtheꢀdoorꢀjamb.ꢀMakeꢀsureꢀthatꢀtheꢀwiresꢀ   
					willꢀclearꢀdoorꢀhingesꢀandꢀotherꢀstructuresꢀinꢀtheꢀdoor.ꢀ   
					Ifꢀyouꢀareꢀunsureꢀaboutꢀanyꢀpartꢀofꢀthisꢀprocess,ꢀpleaseꢀ   
					contactꢀyourꢀJLꢀAudioꢀdealerꢀforꢀinstallationꢀhelp.   
					Selectꢀanꢀevenꢀsurface.ꢀTighteningꢀaꢀspeakerꢀontoꢀ   
					anꢀunevenꢀsurfaceꢀcanꢀdamageꢀit.ꢀCarefullyꢀmeasureꢀ   
					andꢀmarkꢀtheꢀ“mountingꢀholeꢀdiameter”ꢀoutlineꢀinꢀtheꢀ   
					selectedꢀlocationꢀusingꢀtheꢀdimensionsꢀlistedꢀonꢀpageꢀ2.ꢀ   
					Beforeꢀdrillingꢀorꢀcuttingꢀonꢀyourꢀinteriorꢀpanels,ꢀuseꢀaꢀ   
					utilityꢀknifeꢀtoꢀcutꢀanyꢀfabric,ꢀvinylꢀorꢀleatherꢀfromꢀholeꢀ   
					locations.ꢀTheseꢀmaterialsꢀcanꢀeasilyꢀbeꢀsnaggedꢀbyꢀaꢀ   
					drillꢀorꢀaꢀsaw,ꢀcausingꢀdamageꢀtoꢀtheꢀpanelꢀandꢀpossibleꢀ   
					bodilyꢀinjury.ꢀDrillꢀaꢀpilotꢀholeꢀinꢀtheꢀcenterꢀofꢀtheꢀ   
					proposedꢀspeakerꢀmountingꢀhole.ꢀThen,ꢀusingꢀaꢀsaberꢀ   
					sawꢀwithꢀanꢀappropriateꢀblade,ꢀmakeꢀtheꢀcircularꢀcutꢀ   
					outꢀforꢀtheꢀspeaker.ꢀFileꢀanyꢀroughꢀedges.   
					Afterꢀcuttingꢀtheꢀhole,ꢀcheckꢀtoꢀseeꢀthatꢀtheꢀspeakerꢀ   
					frameꢀfitsꢀintoꢀitsꢀmountingꢀholeꢀcleanly.ꢀDoꢀnotꢀ   
					forceꢀtheꢀframeꢀintoꢀaꢀholeꢀthatꢀisꢀtooꢀsmall.ꢀOnceꢀ   
					theꢀspeakerꢀisꢀinꢀplace,ꢀuseꢀtheꢀholesꢀonꢀtheꢀspeaker’sꢀ   
					grilleꢀtrayꢀtoꢀmarkꢀtheꢀpanelꢀwhereꢀtheꢀfourꢀmountingꢀ   
					screwsꢀwillꢀbeꢀpositioned,ꢀasꢀshownꢀinꢀDiagramꢀF.ꢀ   
					Removeꢀtheꢀspeakerꢀandꢀdrillꢀ3/32-inchꢀ(2.4ꢀmm)ꢀ   
					holesꢀatꢀeachꢀmark.ꢀInsertꢀtheꢀ#6ꢀmountingꢀclipsꢀwithꢀ   
					theꢀflatꢀsideꢀtowardsꢀtheꢀspeaker.ꢀConnectꢀtheꢀspeakerꢀ   
					wires,ꢀobservingꢀcorrectꢀpolarity,ꢀandꢀsecureꢀtheꢀ   
					frameꢀadaptor,ꢀspeakerꢀandꢀgrilleꢀtrayꢀtoꢀtheꢀpanelꢀbyꢀ   
					evenlyꢀtighteningꢀbyꢀhandꢀtheꢀprovidedꢀ#6ꢀxꢀ1.25ꢀinchꢀ   
					(32ꢀmm)ꢀmountingꢀscrews.ꢀMakeꢀsureꢀtheꢀmidrangeꢀ   
					driverꢀisꢀsecuredꢀsoꢀthatꢀairꢀdoesꢀnotꢀleakꢀaroundꢀ   
					theꢀmountingꢀflange.ꢀAirꢀleaksꢀwillꢀcauseꢀaꢀsevereꢀ   
					degradationꢀinꢀsoundꢀquality.ꢀSealꢀanyꢀairꢀleaksꢀwithꢀ   
					anꢀautomotive-gradeꢀsealantꢀmaterial.   
					Breakꢀoffꢀsmallꢀpiecesꢀofꢀtheꢀsuppliedꢀbutylꢀadhesiveꢀ   
					puttyꢀandꢀplaceꢀthemꢀonꢀtheꢀinsideꢀofꢀeachꢀgrilleꢀtray.ꢀ   
					Thisꢀadhesiveꢀwillꢀholdꢀtheꢀgrilleꢀmeshꢀinsertꢀinꢀplaceꢀ   
					firmlyꢀandꢀpreventꢀrattling.ꢀInsertꢀtheꢀgrilleꢀmeshꢀ   
					insertꢀintoꢀtheꢀgrilleꢀtray,ꢀsqueezingꢀgentlyꢀaroundꢀitsꢀ   
					edgeꢀuntilꢀitꢀseatsꢀfirmlyꢀintoꢀtheꢀtray.ꢀFinally,ꢀattachꢀ   
					theꢀself-adhesiveꢀJLꢀAudioꢀlogoꢀbadgeꢀtoꢀtheꢀgrilleꢀ   
					meshꢀinsert.   
					Youꢀmayꢀalsoꢀchooseꢀtoꢀinstallꢀtheꢀmidrangeꢀdriversꢀ   
					usingꢀtheꢀFrameꢀAdaptorsꢀwithꢀnoꢀgrilleꢀtray.ꢀꢀThisꢀcanꢀ   
					beꢀusefulꢀforꢀapplicationsꢀwhereꢀaꢀcustomꢀgrilleꢀisꢀbeingꢀ   
					fabricatedꢀandꢀwillꢀresultꢀinꢀaꢀsmallerꢀoverallꢀmountingꢀ   
					diameterꢀthanꢀtheꢀstandardꢀtab-mountꢀsystemꢀasꢀ   
					shownꢀinꢀDiagramꢀGꢀonꢀpageꢀ11.   
					miDranGe installation   
					Theꢀmidrangeꢀdriversꢀshouldꢀbeꢀinstalledꢀinꢀoneꢀofꢀ   
					theꢀfollowingꢀwaysꢀdependingꢀonꢀlocation:   
					ꢀ 
					factory location:ꢀFollowꢀtheꢀsameꢀwiringꢀproceduresꢀ   
					outlinedꢀforꢀtheꢀwooferꢀinstallation.   
					DiaGram f: Custom loCation woofer installation   
					TheꢀC5-400cmꢀhasꢀbeenꢀdesignedꢀtoꢀinstall,ꢀwithoutꢀ   
					modifications,ꢀintoꢀmostꢀvehiclesꢀthatꢀacceptꢀaꢀ4-inchꢀ   
					(100ꢀmm)ꢀspeaker.ꢀMostꢀfactoryꢀ4-inchꢀspeakersꢀuseꢀ   
					fourꢀmountingꢀscrewsꢀwhichꢀwillꢀlineꢀupꢀwithꢀtheꢀ   
					mountingꢀholesꢀonꢀyourꢀwoofers.ꢀInꢀmostꢀfactoryꢀ   
					locations,ꢀitꢀwillꢀbeꢀnecessaryꢀtoꢀuseꢀtheꢀsuppliedꢀFlushꢀ   
					MountꢀAdaptorꢀRingsꢀasꢀshownꢀinꢀtheꢀDiagramꢀEꢀonꢀ   
					pageꢀ11.   
					Useꢀtheꢀsuppliedꢀmountingꢀclipsꢀunlessꢀtheꢀfactoryꢀ   
					holesꢀalreadyꢀfeatureꢀthreadedꢀinserts.ꢀHand-tightenꢀ   
					theꢀscrewsꢀevenlyꢀtoꢀavoidꢀbendingꢀtheꢀspeakerꢀframe!   
					Someꢀvehiclesꢀwhichꢀacceptꢀaꢀ4-inchꢀ(100ꢀmm)ꢀ   
					speakerꢀuseꢀaꢀtwo-holeꢀmountingꢀsystem.ꢀThisꢀcanꢀbeꢀ   
					easilyꢀaccommodatedꢀbyꢀbreakingꢀoffꢀtwoꢀofꢀtheꢀtabsꢀasꢀ   
					shownꢀinꢀtheꢀdiagramꢀatꢀtheꢀtopꢀofꢀthisꢀpage.ꢀAllꢀfourꢀ   
					mountingꢀtabsꢀareꢀperforatedꢀtoꢀpermitꢀtheirꢀremoval.ꢀ   
					Bendꢀeachꢀunneededꢀtabꢀbackꢀandꢀforthꢀuntilꢀitꢀbreaksꢀ   
					off.ꢀPleaseꢀbeꢀcarefulꢀinꢀhandlingꢀtheꢀspeakerꢀafterꢀ   
					breakingꢀoffꢀtheꢀtabsꢀasꢀthereꢀmayꢀbeꢀsharpꢀedges.   
					DiaGram G: Custom loCation woofer installation   
					Custom location:ꢀForꢀcustom-mountedꢀ   
					applications,ꢀbreakꢀoffꢀallꢀfourꢀmountingꢀtabsꢀandꢀ   
					useꢀtheꢀsuppliedꢀFrameꢀAdaptorsꢀasꢀshownꢀinꢀtheꢀ   
					diagramsꢀonꢀpageꢀ11.ꢀTheseꢀFrameꢀAdaptorsꢀpermitꢀ   
					forꢀaꢀsmallerꢀoverallꢀdiameterꢀwhenꢀcustomꢀmountingꢀ   
					theꢀspeakersꢀandꢀmustꢀbeꢀusedꢀinꢀorderꢀtoꢀinstallꢀtheꢀ   
					suppliedꢀgrilles.ꢀ   
					Runꢀspeakerꢀwireꢀtoꢀtheꢀdesiredꢀmountingꢀlocations.ꢀ   
					Ifꢀyouꢀareꢀrunningꢀwiresꢀintoꢀaꢀdoor,ꢀuseꢀexistingꢀ   
					factoryꢀwiringꢀbootsꢀwheneverꢀpossible.ꢀIfꢀyouꢀareꢀ   
					drillingꢀnewꢀholes,ꢀfileꢀtheirꢀedgesꢀandꢀinstallꢀrubberꢀ   
					grommetsꢀintoꢀeachꢀhole.ꢀWiresꢀshouldꢀthenꢀbeꢀ   
					WARNING   
					!!   
					Hand-tighten the screws evenly in a criss-cross   
					pattern to avoid bending the speaker frame or   
					stripping the mounting clips.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					10 | JL Audio - C5-653 Owner’s Manual   
					11   
				tweeter installation   
					DiaGram H: flusH-mount tweeter installation   
					First,ꢀrunꢀspeakerꢀwiresꢀfromꢀtheꢀtweeterꢀoutputꢀofꢀ   
					theꢀcrossoverꢀ(seeꢀdiagramsꢀonꢀpageꢀ5)ꢀtoꢀtheꢀdesiredꢀ   
					tweeterꢀmountingꢀlocations,ꢀobservingꢀtheꢀsameꢀ   
					precautionsꢀasꢀmentionedꢀinꢀtheꢀwooferꢀinstallationꢀ   
					section.ꢀTerminateꢀtheꢀwiresꢀwithꢀtheꢀsuppliedꢀ2.8ꢀ   
					mmꢀmaleꢀcrimpableꢀconnectors.   
					tweeter fiXture installation   
					Theꢀdomeꢀtweetersꢀsuppliedꢀwithꢀyourꢀꢀ   
					C5-653ꢀsystemꢀhaveꢀbeenꢀdesignedꢀforꢀmaximumꢀ   
					mountingꢀversatility.ꢀThereꢀareꢀtwoꢀprimaryꢀ   
					methodsꢀbyꢀwhichꢀtheꢀtweetersꢀcanꢀbeꢀmountedꢀinꢀ   
					yourꢀvehicle:   
					flush-mount:ꢀForꢀtweeterꢀintegrationꢀinꢀaꢀclean,ꢀ   
					unobtrusiveꢀmanner,ꢀyouꢀwillꢀuseꢀtheꢀsuppliedꢀ   
					flush-mountꢀcups.ꢀThisꢀcompactꢀmountingꢀfixtureꢀ   
					isꢀinstalledꢀusingꢀtheꢀmethodꢀillustratedꢀinꢀDiagramꢀ   
					Hꢀandꢀrequiresꢀaꢀmountingꢀholeꢀwithꢀaꢀdiameterꢀofꢀ   
					1.50ꢀin.ꢀ(38.1ꢀmm).ꢀ   
					DiaGram i: surfaCe-mount tweeter installation   
					Atꢀleastꢀ3/4-inchꢀ(19ꢀmm)ꢀofꢀclearanceꢀisꢀrequiredꢀ   
					behindꢀtheꢀmountingꢀsurfaceꢀofꢀtheꢀtweeterꢀforꢀtheꢀ   
					springꢀclipsꢀandꢀ1.18-inchꢀmachineꢀscrewsꢀusedꢀinꢀ   
					mountingꢀtheꢀfixture.ꢀItꢀmayꢀbeꢀnecessaryꢀinꢀsomeꢀ   
					limitedꢀdepthꢀapplicationsꢀtoꢀcutꢀdownꢀtheꢀlengthꢀ   
					ofꢀtheꢀmachineꢀscrew,ꢀorꢀtoꢀuseꢀaꢀshorterꢀscrewꢀ(notꢀ   
					supplied).ꢀHand-tightenꢀtheꢀmachineꢀscrewꢀuntilꢀtheꢀ   
					fixtureꢀisꢀsecure.   
					surface-mount:ꢀInꢀthisꢀapplication,ꢀyouꢀwillꢀnotꢀ   
					needꢀtoꢀcutꢀlargeꢀholesꢀinꢀyourꢀvehicle’sꢀpanelsꢀforꢀ   
					theꢀtweeters.ꢀYouꢀwillꢀonlyꢀneedꢀtoꢀdrillꢀaꢀholeꢀforꢀ   
					theꢀwiresꢀandꢀtwoꢀsmallerꢀholesꢀforꢀtheꢀmountingꢀ   
					screws.ꢀThisꢀapplicationꢀisꢀusefulꢀwhenꢀmountingꢀ   
					theꢀtweetersꢀtoꢀaꢀpanelꢀthatꢀhasꢀinsufficientꢀclearanceꢀ   
					behindꢀitꢀforꢀtheꢀtweeter’sꢀmagnetꢀstructure.   
					Usingꢀtheꢀfixtureꢀasꢀaꢀtemplate,ꢀmarkꢀtheꢀscrewꢀ   
					holeꢀlocationsꢀandꢀaꢀlocationꢀinꢀtheꢀcenterꢀofꢀtheꢀ   
					fixtureꢀforꢀtheꢀwireꢀhole.ꢀRemoveꢀtheꢀfixtureꢀandꢀ   
					drillꢀpilotꢀholesꢀforꢀtheꢀscrewsꢀandꢀaꢀ3/32-inchꢀ(2.4ꢀ   
					mm)ꢀforꢀtheꢀwires.ꢀUseꢀtheꢀsuppliedꢀ#6ꢀxꢀ1-inchꢀ   
					sheetꢀmetalꢀscrewsꢀtoꢀsecureꢀtheꢀfixtureꢀasꢀshownꢀinꢀ   
					DiagramꢀIꢀ(hand-tighten).ꢀRunꢀtheꢀtweeter’sꢀwiresꢀ   
					throughꢀtheꢀholeꢀandꢀinsertꢀtheꢀtweeterꢀuntilꢀitꢀsnapsꢀ   
					intoꢀplace.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					12 | JL Audio - C5-653 Owner’s Manual   
					13   
				installation notes   
					installation notes   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
					14 | JL Audio - C5-653 Owner’s Manual   
					15   
				 |